Merge tag 'irqchip-core-4.0' of git://git.infradead.org/users/jcooper/linux into irq/core

irqchip core changes for v4.0 from Jason Cooper

 - ST
    - New driver, irq-st

 - Renesas
    - Use u32 type for 32bit regs

Documentation/devicetree/bindings/interrupt-controller/st,sti-irq-syscfg.txt

+STMicroelectronics STi System Configuration Controlled IRQs
+-----------------------------------------------------------
+
+On STi based systems; External, CTI (Core Sight), PMU (Performance Management),
+and PL310 L2 Cache IRQs are controlled using System Configuration registers.
+This driver is used to unmask them prior to use.
+
+Required properties:
+- compatible	: Should be set to one of:
+			"st,stih415-irq-syscfg"
+			"st,stih416-irq-syscfg"
+			"st,stih407-irq-syscfg"
+			"st,stid127-irq-syscfg"
+- st,syscfg	: Phandle to Cortex-A9 IRQ system config registers
+- st,irq-device	: Array of IRQs to enable - should be 2 in length
+- st,fiq-device	: Array of FIQs to enable - should be 2 in length
+
+Optional properties:
+- st,invert-ext	: External IRQs can be inverted at will.  This property inverts
+		  these IRQs using bitwise logic.  A number of defines have been
+		  provided for convenience:
+			ST_IRQ_SYSCFG_EXT_1_INV
+			ST_IRQ_SYSCFG_EXT_2_INV
+			ST_IRQ_SYSCFG_EXT_3_INV
+Example:
+
+irq-syscfg {
+	compatible    = "st,stih416-irq-syscfg";
+	st,syscfg     = <&syscfg_cpu>;
+	st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+			<ST_IRQ_SYSCFG_PMU_1>;
+	st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+			<ST_IRQ_SYSCFG_DISABLED>;
+	st,invert-ext = <(ST_IRQ_SYSCFG_EXT_1_INV | ST_IRQ_SYSCFG_EXT_3_INV)>;
+};

drivers/irqchip/Kconfig

@@ -110,6 +110,13 @@ config RENESAS_IRQC
 	bool
 	select IRQ_DOMAIN
 
+config ST_IRQCHIP
+	bool
+	select REGMAP
+	select MFD_SYSCON
+	help
+	  Enables SysCfg Controlled IRQs on STi based platforms.
+
 config TB10X_IRQC
 	bool
 	select IRQ_DOMAIN

drivers/irqchip/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_RENESAS_IRQC)		+= irq-renesas-irqc.o
 obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
 obj-$(CONFIG_ARCH_NSPIRE)		+= irq-zevio.o
 obj-$(CONFIG_ARCH_VT8500)		+= irq-vt8500.o
+obj-$(CONFIG_ST_IRQCHIP)		+= irq-st.o
 obj-$(CONFIG_TB10X_IRQC)		+= irq-tb10x.o
 obj-$(CONFIG_XTENSA)			+= irq-xtensa-pic.o
 obj-$(CONFIG_XTENSA_MX)			+= irq-xtensa-mx.o

drivers/irqchip/irq-renesas-irqc.c

@@ -94,7 +94,7 @@ static int irqc_irq_set_type(struct irq_data *d, unsigned int type)
 	struct irqc_priv *p = irq_data_get_irq_chip_data(d);
 	int hw_irq = irqd_to_hwirq(d);
 	unsigned char value = irqc_sense[type & IRQ_TYPE_SENSE_MASK];
-	unsigned long tmp;
+	u32 tmp;
 
 	irqc_dbg(&p->irq[hw_irq], "sense");
 
@@ -112,7 +112,7 @@ static irqreturn_t irqc_irq_handler(int irq, void *dev_id)
 {
 	struct irqc_irq *i = dev_id;
 	struct irqc_priv *p = i->p;
-	unsigned long bit = BIT(i->hw_irq);
+	u32 bit = BIT(i->hw_irq);
 
 	irqc_dbg(i, "demux1");
 

drivers/irqchip/irq-st.c

+/*
+ *  Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ *  Author: Lee Jones <lee.jones@linaro.org>
+ *
+ *  This is a re-write of Christophe Kerello's PMU driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <dt-bindings/interrupt-controller/irq-st.h>
+#include <linux/err.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define STIH415_SYSCFG_642		0x0a8
+#define STIH416_SYSCFG_7543		0x87c
+#define STIH407_SYSCFG_5102		0x198
+#define STID127_SYSCFG_734		0x088
+
+#define ST_A9_IRQ_MASK			0x001FFFFF
+#define ST_A9_IRQ_MAX_CHANS		2
+
+#define ST_A9_IRQ_EN_CTI_0		BIT(0)
+#define ST_A9_IRQ_EN_CTI_1		BIT(1)
+#define ST_A9_IRQ_EN_PMU_0		BIT(2)
+#define ST_A9_IRQ_EN_PMU_1		BIT(3)
+#define ST_A9_IRQ_EN_PL310_L2		BIT(4)
+#define ST_A9_IRQ_EN_EXT_0		BIT(5)
+#define ST_A9_IRQ_EN_EXT_1		BIT(6)
+#define ST_A9_IRQ_EN_EXT_2		BIT(7)
+
+#define ST_A9_FIQ_N_SEL(dev, chan)	(dev << (8  + (chan * 3)))
+#define ST_A9_IRQ_N_SEL(dev, chan)	(dev << (14 + (chan * 3)))
+#define ST_A9_EXTIRQ_INV_SEL(dev)	(dev << 20)
+
+struct st_irq_syscfg {
+	struct regmap *regmap;
+	unsigned int syscfg;
+	unsigned int config;
+	bool ext_inverted;
+};
+
+static const struct of_device_id st_irq_syscfg_match[] = {
+	{
+		.compatible = "st,stih415-irq-syscfg",
+		.data = (void *)STIH415_SYSCFG_642,
+	},
+	{
+		.compatible = "st,stih416-irq-syscfg",
+		.data = (void *)STIH416_SYSCFG_7543,
+	},
+	{
+		.compatible = "st,stih407-irq-syscfg",
+		.data = (void *)STIH407_SYSCFG_5102,
+	},
+	{
+		.compatible = "st,stid127-irq-syscfg",
+		.data = (void *)STID127_SYSCFG_734,
+	},
+	{}
+};
+
+static int st_irq_xlate(struct platform_device *pdev,
+			int device, int channel, bool irq)
+{
+	struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev);
+
+	/* Set the device enable bit. */
+	switch (device) {
+	case ST_IRQ_SYSCFG_EXT_0:
+		ddata->config |= ST_A9_IRQ_EN_EXT_0;
+		break;
+	case ST_IRQ_SYSCFG_EXT_1:
+		ddata->config |= ST_A9_IRQ_EN_EXT_1;
+		break;
+	case ST_IRQ_SYSCFG_EXT_2:
+		ddata->config |= ST_A9_IRQ_EN_EXT_2;
+		break;
+	case ST_IRQ_SYSCFG_CTI_0:
+		ddata->config |= ST_A9_IRQ_EN_CTI_0;
+		break;
+	case ST_IRQ_SYSCFG_CTI_1:
+		ddata->config |= ST_A9_IRQ_EN_CTI_1;
+		break;
+	case ST_IRQ_SYSCFG_PMU_0:
+		ddata->config |= ST_A9_IRQ_EN_PMU_0;
+		break;
+	case ST_IRQ_SYSCFG_PMU_1:
+		ddata->config |= ST_A9_IRQ_EN_PMU_1;
+		break;
+	case ST_IRQ_SYSCFG_pl310_L2:
+		ddata->config |= ST_A9_IRQ_EN_PL310_L2;
+		break;
+	case ST_IRQ_SYSCFG_DISABLED:
+		return 0;
+	default:
+		dev_err(&pdev->dev, "Unrecognised device %d\n", device);
+		return -EINVAL;
+	}
+
+	/* Select IRQ/FIQ channel for device. */
+	ddata->config |= irq ?
+		ST_A9_IRQ_N_SEL(device, channel) :
+		ST_A9_FIQ_N_SEL(device, channel);
+
+	return 0;
+}
+
+static int st_irq_syscfg_enable(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct st_irq_syscfg *ddata = dev_get_drvdata(&pdev->dev);
+	int channels, ret, i;
+	u32 device, invert;
+
+	channels = of_property_count_u32_elems(np, "st,irq-device");
+	if (channels != ST_A9_IRQ_MAX_CHANS) {
+		dev_err(&pdev->dev, "st,enable-irq-device must have 2 elems\n");
+		return -EINVAL;
+	}
+
+	channels = of_property_count_u32_elems(np, "st,fiq-device");
+	if (channels != ST_A9_IRQ_MAX_CHANS) {
+		dev_err(&pdev->dev, "st,enable-fiq-device must have 2 elems\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ST_A9_IRQ_MAX_CHANS; i++) {
+		of_property_read_u32_index(np, "st,irq-device", i, &device);
+
+		ret = st_irq_xlate(pdev, device, i, true);
+		if (ret)
+			return ret;
+
+		of_property_read_u32_index(np, "st,fiq-device", i, &device);
+
+		ret = st_irq_xlate(pdev, device, i, false);
+		if (ret)
+			return ret;
+	}
+
+	/* External IRQs may be inverted. */
+	of_property_read_u32(np, "st,invert-ext", &invert);
+	ddata->config |= ST_A9_EXTIRQ_INV_SEL(invert);
+
+	return regmap_update_bits(ddata->regmap, ddata->syscfg,
+				  ST_A9_IRQ_MASK, ddata->config);
+}
+
+static int st_irq_syscfg_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const struct of_device_id *match;
+	struct st_irq_syscfg *ddata;
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	match = of_match_device(st_irq_syscfg_match, &pdev->dev);
+	if (!match)
+		return -ENODEV;
+
+	ddata->syscfg = (unsigned int)match->data;
+
+	ddata->regmap = syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+	if (IS_ERR(ddata->regmap)) {
+		dev_err(&pdev->dev, "syscfg phandle missing\n");
+		return PTR_ERR(ddata->regmap);
+	}
+
+	dev_set_drvdata(&pdev->dev, ddata);
+
+	return st_irq_syscfg_enable(pdev);
+}
+
+static int st_irq_syscfg_resume(struct device *dev)
+{
+	struct st_irq_syscfg *ddata = dev_get_drvdata(dev);
+
+	return regmap_update_bits(ddata->regmap, ddata->syscfg,
+				  ST_A9_IRQ_MASK, ddata->config);
+}
+
+static SIMPLE_DEV_PM_OPS(st_irq_syscfg_pm_ops, NULL, st_irq_syscfg_resume);
+
+static struct platform_driver st_irq_syscfg_driver = {
+	.driver = {
+		.name = "st_irq_syscfg",
+		.pm = &st_irq_syscfg_pm_ops,
+		.of_match_table = st_irq_syscfg_match,
+	},
+	.probe = st_irq_syscfg_probe,
+};
+
+static int __init st_irq_syscfg_init(void)
+{
+	return platform_driver_register(&st_irq_syscfg_driver);
+}
+core_initcall(st_irq_syscfg_init);

include/dt-bindings/interrupt-controller/irq-st.h

+/*
+ *  include/linux/irqchip/irq-st.h
+ *
+ *  Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ *  Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+
+#define ST_IRQ_SYSCFG_EXT_0		0
+#define ST_IRQ_SYSCFG_EXT_1		1
+#define ST_IRQ_SYSCFG_EXT_2		2
+#define ST_IRQ_SYSCFG_CTI_0		3
+#define ST_IRQ_SYSCFG_CTI_1		4
+#define ST_IRQ_SYSCFG_PMU_0		5
+#define ST_IRQ_SYSCFG_PMU_1		6
+#define ST_IRQ_SYSCFG_pl310_L2		7
+#define ST_IRQ_SYSCFG_DISABLED		0xFFFFFFFF
+
+#define ST_IRQ_SYSCFG_EXT_1_INV		0x1
+#define ST_IRQ_SYSCFG_EXT_2_INV		0x2
+#define ST_IRQ_SYSCFG_EXT_3_INV		0x4
+
+#endif