V4L/DVB (7846): Re-creates VIDEO_TUNER

VIDEO_TUNER is responsible for compilation of tuners.ko module. This were the
previous behaviour before the creation of MEDIA_TUNER.

Before this patch, tuner.ko were created even for drivers that don't need a
tuner (like webcam drivers).
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/Kconfig

@@ -44,6 +44,10 @@ config VIDEO_TVEEPROM
 	tristate
 	depends on I2C
 
+config VIDEO_TUNER
+	tristate
+	depends on MEDIA_TUNER
+
 #
 # Multimedia Video device configuration
 #
@@ -690,7 +694,7 @@ config VIDEO_MXB
 	tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
 	depends on PCI && VIDEO_V4L1 && I2C
 	select VIDEO_SAA7146_VV
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO

drivers/media/video/Makefile

@@ -84,7 +84,7 @@ obj-$(CONFIG_VIDEO_HEXIUM_GEMINI) += hexium_gemini.o
 obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
 obj-$(CONFIG_TUNER_3036) += tuner-3036.o
 
-obj-$(CONFIG_MEDIA_TUNER) += tuner.o
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
 
 obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
 obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o

drivers/media/video/bt8xx/Kconfig

@@ -6,7 +6,7 @@ config VIDEO_BT848
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
 	select VIDEO_IR
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
 	select VIDEO_TVAUDIO if VIDEO_HELPER_CHIPS_AUTO

drivers/media/video/cx18/Kconfig

@@ -4,7 +4,7 @@ config VIDEO_CX18
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_IR
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
 	select VIDEO_CS5345

drivers/media/video/cx23885/Kconfig

@@ -4,7 +4,7 @@ config VIDEO_CX23885
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_BTCX
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_IR
 	select VIDEOBUF_DVB

drivers/media/video/cx88/Kconfig

@@ -5,7 +5,7 @@ config VIDEO_CX88
 	select FW_LOADER
 	select VIDEO_BTCX
 	select VIDEOBUF_DMA_SG
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_IR
 	select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO

drivers/media/video/em28xx/Kconfig

 config VIDEO_EM28XX
 	tristate "Empia EM28xx USB video capture support"
 	depends on VIDEO_DEV && I2C && INPUT
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_IR
 	select VIDEOBUF_VMALLOC

drivers/media/video/ivtv/Kconfig

@@ -4,7 +4,7 @@ config VIDEO_IVTV
 	select I2C_ALGOBIT
 	select FW_LOADER
 	select VIDEO_IR
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
 	select VIDEO_CX25840

drivers/media/video/pvrusb2/Kconfig

@@ -2,7 +2,7 @@ config VIDEO_PVRUSB2
 	tristate "Hauppauge WinTV-PVR USB2 support"
 	depends on VIDEO_V4L2 && I2C
 	select FW_LOADER
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select VIDEO_CX2341X
 	select VIDEO_SAA711X

drivers/media/video/saa7134/Kconfig

@@ -3,7 +3,7 @@ config VIDEO_SAA7134
 	depends on VIDEO_DEV && PCI && I2C && INPUT
 	select VIDEOBUF_DMA_SG
 	select VIDEO_IR
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
 	select CRC32
 	---help---

drivers/media/video/usbvision/Kconfig

 config VIDEO_USBVISION
 	tristate "USB video devices based on Nogatech NT1003/1004/1005"
 	depends on I2C && VIDEO_V4L2
-	select MEDIA_TUNER
+	select VIDEO_TUNER
 	select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
 	---help---
 	  There are more than 50 different USB video devices based on