pwm: lpc-18xx: use pwm_set_chip_data

The lpc-18xx driver currently manipulates the pwm_device struct directly
rather than using the pwm_set_chip_data() function. While the current
method may save a clock cycle or two, using the explicit function call
makes it more obvious that data is set to the local chip data pointer.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Reviewed-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-lpc18xx-sct.c

@@ -413,14 +413,18 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	}
 
 	for (i = 0; i < lpc18xx_pwm->chip.npwm; i++) {
+		struct lpc18xx_pwm_data *data;
+
 		pwm = &lpc18xx_pwm->chip.pwms[i];
-		pwm->chip_data = devm_kzalloc(lpc18xx_pwm->dev,
-					      sizeof(struct lpc18xx_pwm_data),
-					      GFP_KERNEL);
-		if (!pwm->chip_data) {
+
+		data = devm_kzalloc(lpc18xx_pwm->dev, sizeof(*data),
+				    GFP_KERNEL);
+		if (!data) {
 			ret = -ENOMEM;
 			goto remove_pwmchip;
 		}
+
+		pwm_set_chip_data(pwm, data);
 	}
 
 	platform_set_drvdata(pdev, lpc18xx_pwm);