Commit ff6ee101 authored by Boris Brezillon's avatar Boris Brezillon

mtd: nand: atmel: correct bitflips in erased pages for pre-sama5d4 SoCs

New atmel SoCs are able to fix bitflips in erased pages, but old ones
are still impacted by this problem. Use nand_check_erased_ecc_chunk() to
handle this case.
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Reported-by: default avatarHerve Codina <herve.CODINA@celad.com>
Reviewed-by: default avatarHerve Codina <herve.CODINA@celad.com>
Tested-by: default avatarHerve Codina <herve.CODINA@celad.com>
parent 8ae6bcd1
......@@ -863,17 +863,6 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
uint8_t *buf_pos;
int max_bitflips = 0;
/* If can correct bitfilps from erased page, do the normal check */
if (host->caps->pmecc_correct_erase_page)
goto normal_check;
for (i = 0; i < nand_chip->ecc.total; i++)
if (ecc[i] != 0xff)
goto normal_check;
/* Erased page, return OK */
return 0;
normal_check:
for (i = 0; i < nand_chip->ecc.steps; i++) {
err_nbr = 0;
if (pmecc_stat & 0x1) {
......@@ -884,16 +873,30 @@ static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
pmecc_get_sigma(mtd);
err_nbr = pmecc_err_location(mtd);
if (err_nbr == -1) {
if (err_nbr >= 0) {
pmecc_correct_data(mtd, buf_pos, ecc, i,
nand_chip->ecc.bytes,
err_nbr);
} else if (!host->caps->pmecc_correct_erase_page) {
u8 *ecc_pos = ecc + (i * nand_chip->ecc.bytes);
/* Try to detect erased pages */
err_nbr = nand_check_erased_ecc_chunk(buf_pos,
host->pmecc_sector_size,
ecc_pos,
nand_chip->ecc.bytes,
NULL, 0,
nand_chip->ecc.strength);
}
if (err_nbr < 0) {
dev_err(host->dev, "PMECC: Too many errors\n");
mtd->ecc_stats.failed++;
return -EIO;
} else {
pmecc_correct_data(mtd, buf_pos, ecc, i,
nand_chip->ecc.bytes, err_nbr);
mtd->ecc_stats.corrected += err_nbr;
max_bitflips = max_t(int, max_bitflips, err_nbr);
}
mtd->ecc_stats.corrected += err_nbr;
max_bitflips = max_t(int, max_bitflips, err_nbr);
}
pmecc_stat >>= 1;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment