Skip to content

L
linux
Switch branch/tag
  1. 18 Dec, 2018 11 commits
  3. 17 Dec, 2018 1 commit
  5. 16 Dec, 2018 12 commits
    • Marcin Wojtas's avatar
      net: mvneta: fix operation for 64K PAGE_SIZE · e735fd55
      Marcin Wojtas authored 
      Recent changes in the mvneta driver reworked allocation
and handling of the ingress buffers to use entire pages.
Apart from that in SW BM scenario the HW must be informed
via PRXDQS about the biggest possible incoming buffer
that can be propagated by RX descriptors.

The BufferSize field was filled according to the MTU-dependent
pkt_size value. Later change to PAGE_SIZE broke RX operation
when usin 64K pages, as the field is simply too small.

This patch conditionally limits the value passed to the BufferSize
of the PRXDQS register, depending on the PAGE_SIZE used.
On the occasion remove now unused frag_size field of the mvneta_port
structure.

Fixes: 562e2f46 ("net: mvneta: Improve the buffer allocation method for SWBM")
Signed-off-by: default avatarMarcin Wojtas <mw@semihalf.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e735fd55
    • David S. Miller's avatar
      Merge branch 'hns-fixes' · 369a094d
      David S. Miller authored 
      Peng Li says:

====================
net: hns: Code improvements & fixes for HNS driver

This patchset introduces some code improvements and fixes
for the identified problems in the HNS driver.

Every patch is independent.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      369a094d
    • Yonglong Liu's avatar
      net: hns: Fix ping failed when use net bridge and send multicast · 6adafc35
      Yonglong Liu authored 
      Create a net bridge, add eth and vnet to the bridge. The vnet is used
by a virtual machine. When ping the virtual machine from the outside
host and the virtual machine send multicast at the same time, the ping
package will lost.

The multicast package send to the eth, eth will send it to the bridge too,
and the bridge learn the mac of eth. When outside host ping the virtual
mechine, it will match the promisc entry of the eth which is not expected,
and the bridge send it to eth not to vnet, cause ping lost.

So this patch change promisc tcam entry position to the END of 512 tcam
entries, which indicate lower priority. And separate one promisc entry to
two: mc & uc, to avoid package match the wrong tcam entry.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      6adafc35
    • Yonglong Liu's avatar
      net: hns: Add mac pcs config when enable|disable mac · 726ae5c9
      Yonglong Liu authored 
      In some case, when mac enable|disable and adjust link, may cause hard to
link(or abnormal) between mac and phy. This patch adds the code for rx PCS
to avoid this bug.

Disable the rx PCS when driver disable the gmac, and enable the rx PCS
when driver enable the mac.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      726ae5c9
    • Yonglong Liu's avatar
      net: hns: Fix ntuple-filters status error. · 7e74a19c
      Yonglong Liu authored 
      The ntuple-filters features is forced on by chip.
But it shows "ntuple-filters: off [fixed]" when use ethtool.
This patch make it correct with "ntuple-filters: on [fixed]".
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7e74a19c
    • Yonglong Liu's avatar
      net: hns: Avoid net reset caused by pause frames storm · a57275d3
      Yonglong Liu authored 
      There will be a large number of MAC pause frames on the net,
which caused tx timeout of net device. And then the net device
was reset to try to recover it. So that is not useful, and will
cause some other problems.

So need doubled ndev->watchdog_timeo if device watchdog occurred
until watchdog_timeo up to 40s and then try resetting to recover
it.

When collecting dfx information such as hardware registers when tx timeout.
Some registers for count were cleared when read. So need move this task
before update net state which also read the count registers.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a57275d3
    • Yonglong Liu's avatar
      net: hns: Free irq when exit from abnormal branch · c82bd077
      Yonglong Liu authored 
      1.In "hns_nic_init_irq", if request irq fail at index i,
  the function return directly without releasing irq resources
  that already requested.

2.In "hns_nic_net_up" after "hns_nic_init_irq",
  if exceptional branch occurs, irqs that already requested
  are not release.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c82bd077
    • Yonglong Liu's avatar
      net: hns: Clean rx fbd when ae stopped. · 31f6b61d
      Yonglong Liu authored 
      If there are packets in hardware when changing the speed or duplex,
it may cause hardware hang up.

This patch adds the code to wait rx fbd clean up when ae stopped.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      31f6b61d
    • Yonglong Liu's avatar
      net: hns: Fixed bug that netdev was opened twice · 5778b13b
      Yonglong Liu authored 
      After resetting dsaf to try to repair chip error such as ecc error,
the net device will be open if net interface is up. But at this time
if there is the users set the net device up with the command ifconfig,
the net device will be opened twice consecutively.

Function napi_enable was called when open device. And Kernel panic will
be occurred if it was called twice consecutively. Such as follow:
static inline void napi_enable(struct napi_struct *n)
{
         BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state));
         smp_mb__before_clear_bit();
         clear_bit(NAPI_STATE_SCHED, &n->state);
}

[37255.571996] Kernel panic - not syncing: BUG!
[37255.595234] Call trace:
[37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0
[37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28
[37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8
[37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c
[37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0
[37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c
[37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168
[37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c
[37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68
[37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704
[37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4
[37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84
[37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c
[37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618
[37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4
[37255.801139] SMP: stopping secondary CPUs
[37255.805079] kbox: catch panic event.
[37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072
[37255.816103] flush cache 0xffff80003f000000  size 0x800000
[37255.822192] flush cache 0xffff80003f000000  size 0x800000
[37255.828289] flush cache 0xffff80003f000000  size 0x800000
[37255.834378] kbox: no notify die func register. no need to notify
[37255.840413] ---[ end Kernel panic - not syncing: BUG!

This patchset fix this bug according to the flag NIC_STATE_DOWN.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5778b13b
    • Yonglong Liu's avatar
      net: hns: Some registers use wrong address according to the datasheet. · 4ad26f11
      Yonglong Liu authored 
      According to the hip06 datasheet:
1.Six registers use wrong address:
  RCB_COM_SF_CFG_INTMASK_RING
  RCB_COM_SF_CFG_RING_STS
  RCB_COM_SF_CFG_RING
  RCB_COM_SF_CFG_INTMASK_BD
  RCB_COM_SF_CFG_BD_RINT_STS
  DSAF_INODE_VC1_IN_PKT_NUM_0_REG
2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be
  0x103C + 0x80 * all_chn_num
3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG
  is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be
  overwrite

These registers are only used in "ethtool -d", so that did not cause ndev
to misfunction.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ad26f11
    • Yonglong Liu's avatar
      net: hns: All ports can not work when insmod hns ko after rmmod. · 308c6caf
      Yonglong Liu authored 
      There are two test cases:
1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio,
   and install them again, must use "ifconfig down/ifconfig up"
   command pair to bring port to work.

   This patch calls phy_stop function when init phy to fix this bug.

2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again,
   all ports can not use anymore, because of the phy devices register
   failed(phy devices already exists).

   Phy devices are registered when hns_dsaf installed, this patch
   removes them when hns_dsaf removed.

The two cases are sometimes related, fixing the second case also requires
fixing the first case, so fix them together.
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      308c6caf
    • Yonglong Liu's avatar
      net: hns: Incorrect offset address used for some registers. · 4e1d4be6
      Yonglong Liu authored 
      According to the hip06 Datasheet:
1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num
2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num
Signed-off-by: default avatarYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: default avatarPeng Li <lipeng321@huawei.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4e1d4be6
  7. 15 Dec, 2018 6 commits
  9. 14 Dec, 2018 10 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7