[ Upstream commit fd98e941 ]

Commit 79901317 ("n_tty: Don't flush buffer when closing ldisc"),
first merged in kernel release 3.10, caused the following regression
in the Gigaset M101 driver:

Before that commit, when closing the N_TTY line discipline in
preparation to switching to N_GIGASET_M101, receive_room would be
reset to a non-zero value by the call to n_tty_flush_buffer() in
n_tty's close method. With the removal of that call, receive_room
might be left at zero, blocking data reception on the serial line.

The present patch fixes that regression by setting receive_room
to an appropriate value in the ldisc open method.

Fixes: 79901317 ("n_tty: Don't flush buffer when closing ldisc")
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 5ebc7846 ]

Since the mdb add/del code was introduced there have been 2 br_mdb_notify
calls when doing br_mdb_add() resulting in 2 notifications on each add.

Example:
 Command: bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
 Before patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent

 After patch:
 root@debian:~# bridge monitor all
 [MDB]dev br0 port eth1 grp 239.0.0.1 permanent
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Fixes: cfd56754 ("bridge: add support of adding and deleting mdb entries")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit a0a2a660 ]

The commit 738ac1eb ("net: Clone
skb before setting peeked flag") introduced a use-after-free bug
in skb_recv_datagram.  This is because skb_set_peeked may create
a new skb and free the existing one.  As it stands the caller will
continue to use the old freed skb.

This patch fixes it by making skb_set_peeked return the new skb
(or the old one if unchanged).

Fixes: 738ac1eb ("net: Clone skb before setting peeked flag")
Reported-by: Brenden Blanco <bblanco@plumgrid.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Brenden Blanco <bblanco@plumgrid.com>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 89c22d8c ]

When we calculate the checksum on the recv path, we store the
result in the skb as an optimisation in case we need the checksum
again down the line.

This is in fact bogus for the MSG_PEEK case as this is done without
any locking.  So multiple threads can peek and then store the result
to the same skb, potentially resulting in bogus skb states.

This patch fixes this by only storing the result if the skb is not
shared.  This preserves the optimisations for the few cases where
it can be done safely due to locking or other reasons, e.g., SIOCINQ.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 738ac1eb ]

Shared skbs must not be modified and this is crucial for broadcast
and/or multicast paths where we use it as an optimisation to avoid
unnecessary cloning.

The function skb_recv_datagram breaks this rule by setting peeked
without cloning the skb first.  This causes funky races which leads
to double-free.

This patch fixes this by cloning the skb and replacing the skb
in the list when setting skb->peeked.

Fixes: a59322be ("[UDP]: Only increment counter on first peek/recv")
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2c17d27c ]

Incoming packet should be either in backlog queue or
in RCU read-side section. Otherwise, the final sequence of
flush_backlog() and synchronize_net() may miss packets
that can run without device reference:

CPU 1                  CPU 2
                       skb->dev: no reference
                       process_backlog:__skb_dequeue
                       process_backlog:local_irq_enable

on_each_cpu for
flush_backlog =>       IPI(hardirq): flush_backlog
                       - packet not found in backlog

                       CPU delayed ...
synchronize_net
- no ongoing RCU
read-side sections

netdev_run_todo,
rcu_barrier: no
ongoing callbacks
                       __netif_receive_skb_core:rcu_read_lock
                       - too late
free dev
                       process packet for freed dev

Fixes: 6e583ce5 ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit e9e4dd32 ]

commit 381c759d ("ipv4: Avoid crashing in ip_error")
fixes a problem where processed packet comes from device
with destroyed inetdev (dev->ip_ptr). This is not expected
because inetdev_destroy is called in NETDEV_UNREGISTER
phase and packets should not be processed after
dev_close_many() and synchronize_net(). Above fix is still
required because inetdev_destroy can be called for other
reasons. But it shows the real problem: backlog can keep
packets for long time and they do not hold reference to
device. Such packets are then delivered to upper levels
at the same time when device is unregistered.
Calling flush_backlog after NETDEV_UNREGISTER_FINAL still
accounts all packets from backlog but before that some packets
continue to be delivered to upper levels long after the
synchronize_net call which is supposed to wait the last
ones. Also, as Eric pointed out, processed packets, mostly
from other devices, can continue to add new packets to backlog.

Fix the problem by moving flush_backlog early, after the
device driver is stopped and before the synchronize_net() call.
Then use netif_running check to make sure we do not add more
packets to backlog. We have to do it in enqueue_to_backlog
context when the local IRQ is disabled. As result, after the
flush_backlog and synchronize_net sequence all packets
should be accounted.

Thanks to Eric W. Biederman for the test script and his
valuable feedback!
Reported-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Fixes: 6e583ce5 ("net: eliminate refcounting in backlog queue")
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fecdf8be ]

pktgen_thread_worker() is obviously racy, kthread_stop() can come
between the kthread_should_stop() check and set_current_state().
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Marcelo Leitner <mleitner@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f1158b74 ]

Since commit b0e9a30d ("bridge: Add vlan id to multicast groups")
there's a check in br_ip_equal() for a matching vlan id, but the mdb
functions were not modified to use (or at least zero it) so when an
entry was added it would have a garbage vlan id (from the local br_ip
variable in __br_mdb_add/del) and this would prevent it from being
matched and also deleted. So zero out the whole local ip var to protect
ourselves from future changes and also to fix the current bug, since
there's no vlan id support in the mdb uapi - use always vlan id 0.
Example before patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
RTNETLINK answers: Invalid argument

After patch:
root@debian:~# bridge mdb add dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb del dev br0 port eth1 grp 239.0.0.1 permanent
root@debian:~# bridge mdb
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Fixes: b0e9a30d ("bridge: Add vlan id to multicast groups")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fdd75ea8 ]

Calling connect() with an AF_TIPC socket would trigger a series
of error messages from SELinux along the lines of:
SELinux: Invalid class 0
type=AVC msg=audit(1434126658.487:34500): avc:  denied  { <unprintable> }
  for pid=292 comm="kworker/u16:5" scontext=system_u:system_r:kernel_t:s0
  tcontext=system_u:object_r:unlabeled_t:s0 tclass=<unprintable>
  permissive=0

This was due to a failure to initialize the security state of the new
connection sock by the tipc code, leaving it with junk in the security
class field and an unlabeled secid.  Add a call to security_sk_clone()
to inherit the security state from the parent socket.
Reported-by: Tim Shearer <tim.shearer@overturenetworks.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fc24f2b2 ]

Frag needed should be sent only if the inner header asked
to not fragment. Currently fragmentation is broken if the
tunnel has df set, but df was not asked in the original
packet. The tunnel's df needs to be still checked to update
internally the pmtu cache.

Commit 23a3647b broke it, and this commit fixes
the ipv4 df check back to the way it was.

Fixes: 23a3647b ("ip_tunnels: Use skb-len to PMTU check.")
Cc: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4f7d2cdf ]

Jason Gunthorpe reported that since commit c02db8c6 ("rtnetlink: make
SR-IOV VF interface symmetric"), we don't verify IFLA_VF_INFO attributes
anymore with respect to their policy, that is, ifla_vfinfo_policy[].

Before, they were part of ifla_policy[], but they have been nested since
placed under IFLA_VFINFO_LIST, that contains the attribute IFLA_VF_INFO,
which is another nested attribute for the actual VF attributes such as
IFLA_VF_MAC, IFLA_VF_VLAN, etc.

Despite the policy being split out from ifla_policy[] in this commit,
it's never applied anywhere. nla_for_each_nested() only does basic nla_ok()
testing for struct nlattr, but it doesn't know about the data context and
their requirements.

Fix, on top of Jason's initial work, does 1) parsing of the attributes
with the right policy, and 2) using the resulting parsed attribute table
from 1) instead of the nla_for_each_nested() loop (just like we used to
do when still part of ifla_policy[]).

Reference: http://thread.gmane.org/gmane.linux.network/368913
Fixes: c02db8c6 ("rtnetlink: make SR-IOV VF interface symmetric")
Reported-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Cc: Greg Rose <gregory.v.rose@intel.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Rony Efraim <ronye@mellanox.com>
Cc: Vlad Zolotarov <vladz@cloudius-systems.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Vlad Zolotarov <vladz@cloudius-systems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit d339727c ]

User space can crash kernel with

ip link add ifb10 numtxqueues 100000 type ifb

We must replace a BUG_ON() by proper test and return -EINVAL for
crazy values.

Fixes: 60877a32 ("net: allow large number of tx queues")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4c938d22 ]

Before commit daad1512 ("ipv6: Make ipv6_is_mld() inline and use it
from ip6_mc_input().") MLD packets were only processed locally. After the
change, a copy of MLD packet goes through ip6_mr_input, causing
MRT6MSG_NOCACHE message to be generated to user space.

Make MLD packet only processed locally.

Fixes: daad1512 ("ipv6: Make ipv6_is_mld() inline and use it from ip6_mc_input().")
Signed-off-by: Hermin Anggawijaya <hermin.anggawijaya@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 7cb74be6 upstream.

Pages looked up by __hfs_bnode_create() (called by hfs_bnode_create() and
hfs_bnode_find() for finding or creating pages corresponding to an inode)
are immediately kmap()'ed and used (both read and write) and kunmap()'ed,
and should not be page_cache_release()'ed until hfs_bnode_free().

This patch fixes a problem I first saw in July 2012: merely running "du"
on a large hfsplus-mounted directory a few times on a reasonably loaded
system would get the hfsplus driver all confused and complaining about
B-tree inconsistencies, and generates a "BUG: Bad page state".  Most
recently, I can generate this problem on up-to-date Fedora 22 with shipped
kernel 4.0.5, by running "du /" (="/" + "/home" + "/mnt" + other smaller
mounts) and "du /mnt" simultaneously on two windows, where /mnt is a
lightly-used QEMU VM image of the full Mac OS X 10.9:

$ df -i / /home /mnt
Filesystem                  Inodes   IUsed      IFree IUse% Mounted on
/dev/mapper/fedora-root    3276800  551665    2725135   17% /
/dev/mapper/fedora-home   52879360  716221   52163139    2% /home
/dev/nbd0p2             4294967295 1387818 4293579477    1% /mnt

After applying the patch, I was able to run "du /" (60+ times) and "du
/mnt" (150+ times) continuously and simultaneously for 6+ hours.

There are many reports of the hfsplus driver getting confused under load
and generating "BUG: Bad page state" or other similar issues over the
years.  [1]

The unpatched code [2] has always been wrong since it entered the kernel
tree.  The only reason why it gets away with it is that the
kmap/memcpy/kunmap follow very quickly after the page_cache_release() so
the kernel has not had a chance to reuse the memory for something else,
most of the time.

The current RW driver appears to have followed the design and development
of the earlier read-only hfsplus driver [3], where-by version 0.1 (Dec
2001) had a B-tree node-centric approach to
read_cache_page()/page_cache_release() per bnode_get()/bnode_put(),
migrating towards version 0.2 (June 2002) of caching and releasing pages
per inode extents.  When the current RW code first entered the kernel [2]
in 2005, there was an REF_PAGES conditional (and "//" commented out code)
to switch between B-node centric paging to inode-centric paging.  There
was a mistake with the direction of one of the REF_PAGES conditionals in
__hfs_bnode_create().  In a subsequent "remove debug code" commit [4], the
read_cache_page()/page_cache_release() per bnode_get()/bnode_put() were
removed, but a page_cache_release() was mistakenly left in (propagating
the "REF_PAGES <-> !REF_PAGE" mistake), and the commented-out
page_cache_release() in bnode_release() (which should be spanned by
!REF_PAGES) was never enabled.

References:
[1]:
Michael Fox, Apr 2013
http://www.spinics.net/lists/linux-fsdevel/msg63807.html
("hfsplus volume suddenly inaccessable after 'hfs: recoff %d too large'")

Sasha Levin, Feb 2015
http://lkml.org/lkml/2015/2/20/85 ("use after free")

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/740814
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1027887
https://bugzilla.kernel.org/show_bug.cgi?id=42342
https://bugzilla.kernel.org/show_bug.cgi?id=63841
https://bugzilla.kernel.org/show_bug.cgi?id=78761

[2]:
http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\
fs/hfs/bnode.c?id=d1081202
commit d1081202
Author: Andrew Morton <akpm@osdl.org>
Date:   Wed Feb 25 16:17:36 2004 -0800

    [PATCH] HFS rewrite

http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\
fs/hfsplus/bnode.c?id=91556682

commit 91556682
Author: Andrew Morton <akpm@osdl.org>
Date:   Wed Feb 25 16:17:48 2004 -0800

    [PATCH] HFS+ support

[3]:
http://sourceforge.net/projects/linux-hfsplus/

http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.1/
http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.2/

http://linux-hfsplus.cvs.sourceforge.net/viewvc/linux-hfsplus/linux/\
fs/hfsplus/bnode.c?r1=1.4&r2=1.5

Date:   Thu Jun 6 09:45:14 2002 +0000
Use buffer cache instead of page cache in bnode.c. Cache inode extents.

[4]:
http://git.kernel.org/cgit/linux/kernel/git/\
stable/linux-stable.git/commit/?id=a5e3985f

commit a5e3985f
Author: Roman Zippel <zippel@linux-m68k.org>
Date:   Tue Sep 6 15:18:47 2005 -0700

[PATCH] hfs: remove debug code
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Sougata Santra <sougata@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f1590670 upstream.

Current implementation of descriptor init procedure only takes
care about setting/clearing ownership flag in "des0"/"des1"
fields while it is perfectly possible to get unexpected bits
set because of the following factors:

 [1] On driver probe underlying memory allocated with
     dma_alloc_coherent() might not be zeroed and so
     it will be filled with garbage.

 [2] During driver operation some bits could be set by SD/MMC
     controller (for example error flags etc).

And unexpected and/or randomly set flags in "des0"/"des1"
fields may lead to unpredictable behavior of GMAC DMA block.

This change addresses both items above with:

 [1] Use of dma_zalloc_coherent() instead of simple
     dma_alloc_coherent() to make sure allocated memory is
     zeroed. That shouldn't affect performance because
     this allocation only happens once on driver probe.

 [2] Do explicit zeroing of both "des0" and "des1" fields
     of all buffer descriptors during initialization of
     DMA transfer.

And while at it fixed identation of dma_free_coherent()
counterpart as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: arc-linux-dev@synopsys.com
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: David Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 5e99b139 upstream.

The mlx4 IB driver implementation for ib_query_ah used a wrong offset
(28 instead of 29) when link type is Ethernet. Fixed to use the correct one.

Fixes: fa417f7b ('IB/mlx4: Add support for IBoE')
Signed-off-by: Shani Michaeli <shanim@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2b135db3 upstream.

The pkey mapping for RoCE must remain the default mapping:
VFs:
  virtual index 0 = mapped to real index 0 (0xFFFF)
  All others indices: mapped to a real pkey index containing an
                      invalid pkey.
PF:
  virtual index i = real index i.

Don't allow users to change these mappings using files found in
sysfs.

Fixes: c1e7e466 ('IB/mlx4: Add iov directory in sysfs under the ib device')
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 35d4a0b6 upstream.

Fixes: 2a72f212 ("IB/uverbs: Remove dev_table")

Before this commit there was a device look-up table that was protected
by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When
it was dropped and container_of was used instead, it enabled the race
with remove_one as dev might be freed just after:
dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but
before the kref_get.

In addition, this buggy patch added some dead code as
container_of(x,y,z) can never be NULL and so dev can never be NULL.
As a result the comment above ib_uverbs_open saying "the open method
will either immediately run -ENXIO" is wrong as it can never happen.

The solution follows Jason Gunthorpe suggestion from below URL:
https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html

cdev will hold a kref on the parent (the containing structure,
ib_uverbs_device) and only when that kref is released it is
guaranteed that open will never be called again.

In addition, fixes the active count scheme to use an atomic
not a kref to prevent WARN_ON as pointed by above comment
from Jason.
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Shachar Raindel <raindel@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b632ffa7 upstream.

We have many WR opcodes that are only supported in kernel space
and/or require optional information to be copied into the WR
structure.  Reject all those not explicitly handled so that we
can't pass invalid information to drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Sagi Grimberg <sagig@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d6f1c17e upstream.

The lkey table is allocated with with a get_user_pages() with an
order based on a number of index bits from a module parameter.

The underlying kernel code cannot allocate that many contiguous pages.

There is no reason the underlying memory needs to be physically
contiguous.

This patch:
- switches the allocation/deallocation to vmalloc/vfree
- caps the number of bits to 23 to insure at least 1 generation bit
  o this matches the module parameter description
Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b4cc0efe upstream.

Fix B-tree corruption when a new record is inserted at position 0 in the
node in hfs_brec_insert().

This is an identical change to the corresponding hfs b-tree code to Sergei
Antonov's "hfsplus: fix B-tree corruption after insertion at position 0",
to keep similar code paths in the hfs and hfsplus drivers in sync, where
appropriate.
Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net>
Cc: Sergei Antonov <saproj@gmail.com>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1401c00e upstream.

Unmapping may require sleeping and we unmap while holding priv->lock, so
convert it to a mutex.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 299b0685 upstream.

'reshape_position' tracks where in the reshape we have reached.
'reshape_safe' tracks where in the reshape we have safely recorded
in the metadata.

These are compared to determine when to update the metadata.
So it is important that reshape_safe is initialised properly.
Currently it isn't.  When starting a reshape from the beginning
it usually has the correct value by luck.  But when reducing the
number of devices in a RAID10, it has the wrong value and this leads
to the metadata not being updated correctly.
This can lead to corruption if the reshape is not allowed to complete.

This patch is suitable for any -stable kernel which supports RAID10
reshape, which is 3.5 and later.

Fixes: 3ea7daa5 ("md/raid10: add reshape support")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 71f8a4b8 upstream.

The following panic is captured in ker3.14, but the issue still exists
in latest kernel.
---------------------------------------------------------------------
[   20.738217] c0 3136 (Compiler) Unable to handle kernel NULL pointer dereference
at virtual address 00000578
......
[   20.738499] c0 3136 (Compiler) PC is at _raw_spin_lock_irqsave+0x24/0x60
[   20.738527] c0 3136 (Compiler) LR is at _raw_spin_lock_irqsave+0x20/0x60
[   20.740134] c0 3136 (Compiler) Call trace:
[   20.740165] c0 3136 (Compiler) [<ffffffc0008ee900>] _raw_spin_lock_irqsave+0x24/0x60
[   20.740200] c0 3136 (Compiler) [<ffffffc0000dd024>] __wake_up+0x1c/0x54
[   20.740230] c0 3136 (Compiler) [<ffffffc000639414>] mmc_wait_data_done+0x28/0x34
[   20.740262] c0 3136 (Compiler) [<ffffffc0006391a0>] mmc_request_done+0xa4/0x220
[   20.740314] c0 3136 (Compiler) [<ffffffc000656894>] sdhci_tasklet_finish+0xac/0x264
[   20.740352] c0 3136 (Compiler) [<ffffffc0000a2b58>] tasklet_action+0xa0/0x158
[   20.740382] c0 3136 (Compiler) [<ffffffc0000a2078>] __do_softirq+0x10c/0x2e4
[   20.740411] c0 3136 (Compiler) [<ffffffc0000a24bc>] irq_exit+0x8c/0xc0
[   20.740439] c0 3136 (Compiler) [<ffffffc00008489c>] handle_IRQ+0x48/0xac
[   20.740469] c0 3136 (Compiler) [<ffffffc000081428>] gic_handle_irq+0x38/0x7c
----------------------------------------------------------------------
Because in SMP, "mrq" has race condition between below two paths:
path1: CPU0: <tasklet context>
  static void mmc_wait_data_done(struct mmc_request *mrq)
  {
     mrq->host->context_info.is_done_rcv = true;
     //
     // If CPU0 has just finished "is_done_rcv = true" in path1, and at
     // this moment, IRQ or ICache line missing happens in CPU0.
     // What happens in CPU1 (path2)?
     //
     // If the mmcqd thread in CPU1(path2) hasn't entered to sleep mode:
     // path2 would have chance to break from wait_event_interruptible
     // in mmc_wait_for_data_req_done and continue to run for next
     // mmc_request (mmc_blk_rw_rq_prep).
     //
     // Within mmc_blk_rq_prep, mrq is cleared to 0.
     // If below line still gets host from "mrq" as the result of
     // compiler, the panic happens as we traced.
     wake_up_interruptible(&mrq->host->context_info.wait);
  }

path2: CPU1: <The mmcqd thread runs mmc_queue_thread>
  static int mmc_wait_for_data_req_done(...
  {
     ...
     while (1) {
           wait_event_interruptible(context_info->wait,
                   (context_info->is_done_rcv ||
                    context_info->is_new_req));
     	   static void mmc_blk_rw_rq_prep(...
           {
           ...
           memset(brq, 0, sizeof(struct mmc_blk_request));

This issue happens very coincidentally; however adding mdelay(1) in
mmc_wait_data_done as below could duplicate it easily.

   static void mmc_wait_data_done(struct mmc_request *mrq)
   {
     mrq->host->context_info.is_done_rcv = true;
+    mdelay(1);
     wake_up_interruptible(&mrq->host->context_info.wait);
    }

At runtime, IRQ or ICache line missing may just happen at the same place
of the mdelay(1).

This patch gets the mmc_context_info at the beginning of function, it can
avoid this race condition.
Signed-off-by: Jialing Fu <jlfu@marvell.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 2220eedf ("mmc: fix async request mechanism ....")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit fbb18169 upstream.

It was possible for an attacking user to trick root (or another user) into
writing his coredumps into an attacker-readable, pre-existing file using
rename() or link(), causing the disclosure of secret data from the victim
process' virtual memory.  Depending on the configuration, it was also
possible to trick root into overwriting system files with coredumps.  Fix
that issue by never writing coredumps into existing files.

Requirements for the attack:
 - The attack only applies if the victim's process has a nonzero
   RLIMIT_CORE and is dumpable.
 - The attacker can trick the victim into coredumping into an
   attacker-writable directory D, either because the core_pattern is
   relative and the victim's cwd is attacker-writable or because an
   absolute core_pattern pointing to a world-writable directory is used.
 - The attacker has one of these:
  A: on a system with protected_hardlinks=0:
     execute access to a folder containing a victim-owned,
     attacker-readable file on the same partition as D, and the
     victim-owned file will be deleted before the main part of the attack
     takes place. (In practice, there are lots of files that fulfill
     this condition, e.g. entries in Debian's /var/lib/dpkg/info/.)
     This does not apply to most Linux systems because most distros set
     protected_hardlinks=1.
  B: on a system with protected_hardlinks=1:
     execute access to a folder containing a victim-owned,
     attacker-readable and attacker-writable file on the same partition
     as D, and the victim-owned file will be deleted before the main part
     of the attack takes place.
     (This seems to be uncommon.)
  C: on any system, independent of protected_hardlinks:
     write access to a non-sticky folder containing a victim-owned,
     attacker-readable file on the same partition as D
     (This seems to be uncommon.)

The basic idea is that the attacker moves the victim-owned file to where
he expects the victim process to dump its core.  The victim process dumps
its core into the existing file, and the attacker reads the coredump from
it.

If the attacker can't move the file because he does not have write access
to the containing directory, he can instead link the file to a directory
he controls, then wait for the original link to the file to be deleted
(because the kernel checks that the link count of the corefile is 1).

A less reliable variant that requires D to be non-sticky works with link()
and does not require deletion of the original link: link() the file into
D, but then unlink() it directly before the kernel performs the link count
check.

On systems with protected_hardlinks=0, this variant allows an attacker to
not only gain information from coredumps, but also clobber existing,
victim-writable files with coredumps.  (This could theoretically lead to a
privilege escalation.)
Signed-off-by: Jann Horn <jann@thejh.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c54839a7 upstream.

reclaim_clean_pages_from_list() assumes that shrink_page_list() returns
number of pages removed from the candidate list.  But shrink_page_list()
puts back mlocked pages without passing it to caller and without
counting as nr_reclaimed.  This increases nr_isolated.

To fix this, this patch changes shrink_page_list() to pass unevictable
pages back to caller.  Caller will take care those pages.

Minchan said:

It fixes two issues.

1. With unevictable page, cma_alloc will be successful.

Exactly speaking, cma_alloc of current kernel will fail due to
unevictable pages.

2. fix leaking of NR_ISOLATED counter of vmstat

With it, too_many_isolated works.  Otherwise, it could make hang until
the process get SIGKILL.
Signed-off-by: Jaewon Kim <jaewon31.kim@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b1b4e435 upstream.

When detecting a serial port on newer PA-RISC machines (with iosapic) we have a
long way to go to find the right IRQ line, registering it, then registering the
serial port and the irq handler for the serial port. During this phase spurious
interrupts for the serial port may happen which then crashes the kernel because
the action handler might not have been set up yet.

So, basically it's a race condition between the serial port hardware and the
CPU which sets up the necessary fields in the irq sructs. The main reason for
this race is, that we unmask the serial port irqs too early without having set
up everything properly before (which isn't easily possible because we need the
IRQ number to register the serial ports).

This patch is a work-around for this problem. It adds checks to the CPU irq
handler to verify if the IRQ action field has been initialized already. If not,
we just skip this interrupt (which isn't critical for a serial port at bootup).
The real fix would probably involve rewriting all PA-RISC specific IRQ code
(for CPU, IOSAPIC, GSC and EISA) to use IRQ domains with proper parenting of
the irq chips and proper irq enabling along this line.

This bug has been in the PA-RISC port since the beginning, but the crashes
happened very rarely with currently used hardware.  But on the latest machine
which I bought (a C8000 workstation), which uses the fastest CPUs (4 x PA8900,
1GHz) and which has the largest possible L1 cache size (64MB each), the kernel
crashed at every boot because of this race. So, without this patch the machine
would currently be unuseable.

For the record, here is the flow logic:
1. serial_init_chip() in 8250_gsc.c calls iosapic_serial_irq().
2. iosapic_serial_irq() calls txn_alloc_irq() to find the irq.
3. iosapic_serial_irq() calls cpu_claim_irq() to register the CPU irq
4. cpu_claim_irq() unmasks the CPU irq (which it shouldn't!)
5. serial_init_chip() then registers the 8250 port.
Problems:
- In step 4 the CPU irq shouldn't have been registered yet, but after step 5
- If serial irq happens between 4 and 5 have finished, the kernel will crash
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1b59ddfc upstream.

The attached change fixes the condition used in the "sub" instruction.
A double word comparison is needed.  This fixes the 64-bit LWS CAS
operation on 64-bit kernels.

I can now enable 64-bit atomic support in GCC.

Signed-off-by: John David Anglin <dave.anglin>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9ae58ae upstream.

We should ensure that we always set the pgio_header's error field
if a READ or WRITE RPC call returns an error. The current code depends
on 'hdr->good_bytes' always being initialised to a large value, which
is not always done correctly by callers.
When this happens, applications may end up missing important errors.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 18e3b739 upstream.

---Steps to Reproduce--
<nfs-server>
# cat /etc/exports
/nfs/referal  *(rw,insecure,no_subtree_check,no_root_squash,crossmnt)
/nfs/old      *(ro,insecure,subtree_check,root_squash,crossmnt)

<nfs-client>
# mount -t nfs nfs-server:/nfs/ /mnt/
# ll /mnt/*/

<nfs-server>
# cat /etc/exports
/nfs/referal   *(rw,insecure,no_subtree_check,no_root_squash,crossmnt,refer=/nfs/old/@nfs-server)
/nfs/old       *(ro,insecure,subtree_check,root_squash,crossmnt)
# service nfs restart

<nfs-client>
# ll /mnt/*/    --->>>>> oops here

[ 5123.102925] BUG: unable to handle kernel NULL pointer dereference at           (null)
[ 5123.103363] IP: [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.103752] PGD 587b9067 PUD 3cbf5067 PMD 0
[ 5123.104131] Oops: 0000 [#1]
[ 5123.104529] Modules linked in: nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi coretemp crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon parport_pc parport i2c_piix4 shpchp auth_rpcgss nfs_acl vmw_vmci lockd grace sunrpc vmwgfx drm_kms_helper ttm drm mptspi serio_raw scsi_transport_spi e1000 mptscsih mptbase ata_generic pata_acpi [last unloaded: nfsd]
[ 5123.105887] CPU: 0 PID: 15853 Comm: ::1-manager Tainted: G           OE   4.2.0-rc6+ #214
[ 5123.106358] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/20/2014
[ 5123.106860] task: ffff88007620f300 ti: ffff88005877c000 task.ti: ffff88005877c000
[ 5123.107363] RIP: 0010:[<ffffffffa03ed38b>]  [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.107909] RSP: 0018:ffff88005877fdb8  EFLAGS: 00010246
[ 5123.108435] RAX: ffff880053f3bc00 RBX: ffff88006ce6c908 RCX: ffff880053a0d240
[ 5123.108968] RDX: ffffea0000e6d940 RSI: ffff8800399a0000 RDI: ffff88006ce6c908
[ 5123.109503] RBP: ffff88005877fe28 R08: ffffffff81c708a0 R09: 0000000000000000
[ 5123.110045] R10: 00000000000001a2 R11: ffff88003ba7f5c8 R12: ffff880054c55800
[ 5123.110618] R13: 0000000000000000 R14: ffff880053a0d240 R15: ffff880053a0d240
[ 5123.111169] FS:  0000000000000000(0000) GS:ffffffff81c27000(0000) knlGS:0000000000000000
[ 5123.111726] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5123.112286] CR2: 0000000000000000 CR3: 0000000054cac000 CR4: 00000000001406f0
[ 5123.112888] Stack:
[ 5123.113458]  ffffea0000e6d940 ffff8800399a0000 00000000000167d0 0000000000000000
[ 5123.114049]  0000000000000000 0000000000000000 0000000000000000 00000000a7ec82c6
[ 5123.114662]  ffff88005877fe18 ffffea0000e6d940 ffff8800399a0000 ffff880054c55800
[ 5123.115264] Call Trace:
[ 5123.115868]  [<ffffffffa03fb44b>] nfs4_try_migration+0xbb/0x220 [nfsv4]
[ 5123.116487]  [<ffffffffa03fcb3b>] nfs4_run_state_manager+0x4ab/0x7b0 [nfsv4]
[ 5123.117104]  [<ffffffffa03fc690>] ? nfs4_do_reclaim+0x510/0x510 [nfsv4]
[ 5123.117813]  [<ffffffff810a4527>] kthread+0xd7/0xf0
[ 5123.118456]  [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160
[ 5123.119108]  [<ffffffff816d9cdf>] ret_from_fork+0x3f/0x70
[ 5123.119723]  [<ffffffff810a4450>] ? kthread_worker_fn+0x160/0x160
[ 5123.120329] Code: 4c 8b 6a 58 74 17 eb 52 48 8d 55 a8 89 c6 4c 89 e7 e8 4a b5 ff ff 8b 45 b0 85 c0 74 1c 4c 89 f9 48 8b 55 90 48 8b 75 98 48 89 df <41> ff 55 00 3d e8 d8 ff ff 41 89 c6 74 cf 48 8b 4d c8 65 48 33
[ 5123.121643] RIP  [<ffffffffa03ed38b>] nfs4_proc_get_locations+0x9b/0x120 [nfsv4]
[ 5123.122308]  RSP <ffff88005877fdb8>
[ 5123.122942] CR2: 0000000000000000

Fixes: ec011fe8 ("NFS: Introduce a vector of migration recovery ops")
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit efcbc04e upstream.

It is unusual to combine the open flags O_RDONLY and O_EXCL, but
it appears that libre-office does just that.

[pid  3250] stat("/home/USER/.config", {st_mode=S_IFDIR|0700, st_size=8192, ...}) = 0
[pid  3250] open("/home/USER/.config/libreoffice/4-suse/user/extensions/buildid", O_RDONLY|O_EXCL <unfinished ...>

NFSv4 takes O_EXCL as a sign that a setattr command should be sent,
probably to reset the timestamps.

When it was an O_RDONLY open, the SETATTR command does not
identify any actual attributes to change.
If no delegation was provided to the open, the SETATTR uses the
all-zeros stateid and the request is accepted (at least by the
Linux NFS server - no harm, no foul).

If a read-delegation was provided, this is used in the SETATTR
request, and a Netapp filer will justifiably claim
NFS4ERR_BAD_STATEID, which the Linux client takes as a sign
to retry - indefinitely.

So only treat O_EXCL specially if O_CREAT was also given.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1f9b8c8f upstream.

While we are committing a transaction, it's possible the previous one is
still finishing its commit and therefore we wait for it to finish first.
However we were not checking if that previous transaction ended up getting
aborted after we waited for it to commit, so we ended up committing the
current transaction which can lead to fs corruption because the new
superblock can point to trees that have had one or more nodes/leafs that
were never durably persisted.
The following sequence diagram exemplifies how this is possible:

          CPU 0                                                        CPU 1

  transaction N starts

  (...)

  btrfs_commit_transaction(N)

    cur_trans->state = TRANS_STATE_COMMIT_START;
    (...)
    cur_trans->state = TRANS_STATE_COMMIT_DOING;
    (...)

    cur_trans->state = TRANS_STATE_UNBLOCKED;
    root->fs_info->running_transaction = NULL;

                                                              btrfs_start_transaction()
                                                                 --> starts transaction N + 1

    btrfs_write_and_wait_transaction(trans, root);
      --> starts writing all new or COWed ebs created
          at transaction N

                                                              creates some new ebs, COWs some
                                                              existing ebs but doesn't COW or
                                                              deletes eb X

                                                              btrfs_commit_transaction(N + 1)
                                                                (...)
                                                                cur_trans->state = TRANS_STATE_COMMIT_START;
                                                                (...)
                                                                wait_for_commit(root, prev_trans);
                                                                  --> prev_trans == transaction N

    btrfs_write_and_wait_transaction() continues
    writing ebs
       --> fails writing eb X, we abort transaction N
           and set bit BTRFS_FS_STATE_ERROR on
           fs_info->fs_state, so no new transactions
           can start after setting that bit

       cleanup_transaction()
         btrfs_cleanup_one_transaction()
           wakes up task at CPU 1

                                                                continues, doesn't abort because
                                                                cur_trans->aborted (transaction N + 1)
                                                                is zero, and no checks for bit
                                                                BTRFS_FS_STATE_ERROR in fs_info->fs_state
                                                                are made

                                                                btrfs_write_and_wait_transaction(trans, root);
                                                                  --> succeeds, no errors during writeback

                                                                write_ctree_super(trans, root, 0);
                                                                  --> succeeds
                                                                  --> we have now a superblock that points us
                                                                      to some root that uses eb X, which was
                                                                      never written to disk

In this scenario future attempts to read eb X from disk results in an
error message like "parent transid verify failed on X wanted Y found Z".

So fix this by aborting the current transaction if after waiting for the
previous transaction we verify that it was aborted.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9d39f054 upstream.

Commit 813f5c0a ("media: Change media device link_notify behaviour")
modified the media controller link setup notification API and updated the
OMAP3 ISP driver accordingly. As a side effect it introduced a bug by
turning power on after setting the link instead of before. This results in
sub-devices not being powered down in some cases when they should be. Fix
it.

Fixes: 813f5c0a [media] media: Change media device link_notify behaviour
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a66b0c41 upstream.

The input_dev is already gone when the rc device is being unregistered
so checking for its presence only means that no remove uevent will be
generated.
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 9962eea9 upstream.

The variable pmd_idx is not initialized for the first iteration of the
for loop.

Assign the proper value which indexes the start address.

Fixes: 719272c4 'x86, mm: only call early_ioremap_page_table_range_init() once'
Signed-off-by: Minfei Huang <mnfhuang@gmail.com>
Cc: tony.luck@intel.com
Cc: wangnan0@huawei.com
Cc: david.vrabel@citrix.com
Reviewed-by: yinghai@kernel.org
Link: http://lkml.kernel.org/r/1436703522-29552-1-git-send-email-mhuang@redhat.comSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 04697858 upstream.

Tony Luck found on his setup, if memory block size 512M will cause crash
during booting.

  BUG: unable to handle kernel paging request at ffffea0074000020
  IP: get_nid_for_pfn+0x17/0x40
  PGD 128ffcb067 PUD 128ffc9067 PMD 0
  Oops: 0000 [#1] SMP
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1
  ...
  Call Trace:
     ? register_mem_sect_under_node+0x66/0xe0
     register_one_node+0x17b/0x240
     ? pci_iommu_alloc+0x6e/0x6e
     topology_init+0x3c/0x95
     do_one_initcall+0xcd/0x1f0

The system has non continuous RAM address:
 BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable
 BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable
 BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable
 BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable
 BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable

So there are start sections in memory block not present.  For example:

    memory block : [0x2c18000000, 0x2c20000000) 512M

first three sections are not present.

The current register_mem_sect_under_node() assume first section is
present, but memory block section number range [start_section_nr,
end_section_nr] would include not present section.

For arch that support vmemmap, we don't setup memmap for struct page
area within not present sections area.

So skip the pfn range that belong to absent section.

[akpm@linux-foundation.org: simplification]
[rientjes@google.com: more simplification]
Fixes: bdee237c ("x86: mm: Use 2GB memory block size on large memory x86-64 systems")
Fixes: 982792c7 ("x86, mm: probe memory block size for generic x86 64bit")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Tony Luck <tony.luck@intel.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 09bfda10 upstream.

With the radeon driver loaded the HP Compaq dc5750
Small Form Factor machine fails to resume from suspend.
Adding a quirk similar to other devices avoids
the problem and the system resumes properly.
Signed-off-by: Jeffery Miller <jmiller@neverware.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 4c17a6d5 upstream.

This might lead to local privilege escalation (code execution as
kernel) for systems where the following conditions are met:

 - CONFIG_CIFS_SMB2 and CONFIG_CIFS_POSIX are enabled
 - a cifs filesystem is mounted where:
  - the mount option "vers" was used and set to a value >=2.0
  - the attacker has write access to at least one file on the filesystem

To attack this, an attacker would have to guess the target_tcon
pointer (but guessing wrong doesn't cause a crash, it just returns an
error code) and win a narrow race.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 36b35d5d upstream.

If we had secondary hash flag set, we ended up modifying hash value in
the updatepp code path. Hence with a failed updatepp we will be using
a wrong hash value for the following hash insert. Fix this by
recomputing hash before insert.

Without this patch we can end up with using wrong slot number in linux
pte. That can result in us missing an hash pte update or invalidate
which can cause memory corruption or even machine check.

Fixes: 6d492ecc ("powerpc/THP: Add code to handle HPTE faults for hugepages")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>