Skip to content

L
linux
Switch branch/tag
  1. 13 Sep, 2014 18 commits
    • Guenter Roeck's avatar
      hwmon: (smsc47m192) Fix temperature limit and vrm write operations · 00cab884
      Guenter Roeck authored 
      commit 043572d5 upstream.

Temperature limit clamps are applied after converting the temperature
from milli-degrees C to degrees C, so either the clamp limit needs
to be specified in degrees C, not milli-degrees C, or clamping must
happen before converting to degrees C. Use the latter method to avoid
overflows.

vrm is an u8, so the written value needs to be limited to [0, 255].

Cc: Axel Lin <axel.lin@ingics.com>
Signed-off-by: default avatarGuenter Roeck <linux@roeck-us.net>
Reviewed-by: default avatarJean Delvare <jdelvare@suse.de>
[bwh: Backported to 3.2:
 - Driver is not using clamp_val(); keep using SENSORS_LIMIT() for consistency
 - Driver is not using kstrtoul(); make the minimum change to set_vrm() so
   we can validate the value before assigning]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      00cab884
    • Christian König's avatar
      drm/radeon: fix irq ring buffer overflow handling · c1dd1fd9
      Christian König authored 
      commit e8c214d2 upstream.

We must mask out the overflow bit as well, otherwise
the wptr will never match the rptr again and the interrupt
handler will loop forever.
Signed-off-by: default avatarChristian König <christian.koenig@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: default avatarMichel Dänzer <michel.daenzer@amd.com>
[bwh: Backported to 3.2: drop changes for unsupported GPUs]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      c1dd1fd9
    • Pratyush Anand's avatar
      USB: Fix persist resume of some SS USB devices · 7a0d07fb
      Pratyush Anand authored 
      commit a40178b2 upstream.

Problem Summary: Problem has been observed generally with PM states
where VBUS goes off during suspend. There are some SS USB devices which
take longer time for link training compared to many others.  Such
devices fail to reconnect with same old address which was associated
with it before suspend.

When system resumes, at some point of time (dpm_run_callback->
usb_dev_resume->usb_resume->usb_resume_both->usb_resume_device->
usb_port_resume) SW reads hub status. If device is present,
then it finishes port resume and re-enumerates device with same
address. If device is not present then, SW thinks that device was
removed during suspend and therefore does logical disconnection
and removes all the resource allocated for this device.

Now, if I put sufficient delay just before root hub status read in
usb_resume_device then, SW sees always that device is present. In normal
course(without any delay) SW sees that no device is present and then SW
removes all resource associated with the device at this port.  In the
latter case, after sometime, device says that hey I am here, now host
enumerates it, but with new address.

Problem had been reproduced when I connect verbatim USB3.0 hard disc
with my STiH407 XHCI host running with 3.10 kernel.

I see that similar problem has been reported here.
https://bugzilla.kernel.org/show_bug.cgi?id=53211
Reading above it seems that bug was not in 3.6.6 and was present in 3.8
and again it was not present for some in 3.12.6, while it was present
for few others. I tested with 3.13-FC19 running at i686 desktop, problem
was still there. However, I was failed to reproduce it with 3.16-RC4
running at same i686 machine. I would say it is just a random
observation. Problem for few devices is always there, as I am unable to
find a proper fix for the issue.

So, now question is what should be the amount of delay so that host is
always able to recognize suspended device after resume.

XHCI specs 4.19.4 says that when Link training is successful, port sets
CSC bit to 1. So if SW reads port status before successful link
training, then it will not find device to be present.  USB Analyzer log
with such buggy devices show that in some cases device switch on the
RX termination after long delay of host enabling the VBUS. In few other
cases it has been seen that device fails to negotiate link training in
first attempt. It has been reported till now that few devices take as
long as 2000 ms to train the link after host enabling its VBUS and
RX termination. This patch implements a 2000 ms timeout for CSC bit to set
ie for link training. If in a case link trains before timeout, loop will
exit earlier.

This patch implements above delay, but only for SS device and when
persist is enabled.

So, for the good device overhead is almost none. While for the bad
devices penalty could be the time which it take for link training.
But, If a device was connected before suspend, and was removed
while system was asleep, then the penalty would be the timeout ie
2000 ms.

Results:

Verbatim USB SS hard disk connected with STiH407 USB host running 3.10
Kernel resumes in 461 msecs without this patch, but hard disk is
assigned a new device address. Same system resumes in 790 msecs with
this patch, but with old device address.
Signed-off-by: default avatarPratyush Anand <pratyush.anand@st.com>
Acked-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      7a0d07fb
    • Oliver Neukum's avatar
      usbcore: don't log on consecutive debounce failures of the same port · 9b627762
      Oliver Neukum authored 
      commit 5ee0f803 upstream.

Some laptops have an internal port for a BT device which picks
up noise when the kill switch is used, but not enough to trigger
printk_rlimit(). So we shouldn't log consecutive faults of this kind.
Signed-off-by: default avatarOliver Neukum <oneukum@suse.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2:
 - Adjust context
 - Error message already includes the port number]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      9b627762
    • Romain Degez's avatar
      ahci: add support for the Promise FastTrak TX8660 SATA HBA (ahci mode) · 784e6a38
      Romain Degez authored 
      commit b32bfc06 upstream.

Add support of the Promise FastTrak TX8660 SATA HBA in ahci mode by
registering the board in the ahci_pci_tbl[].

Note: this HBA also provide a hardware RAID mode when activated in
BIOS but specific drivers from the manufacturer are required in this
case.
Signed-off-by: default avatarRomain Degez <romain.degez@gmail.com>
Tested-by: default avatarRomain Degez <romain.degez@gmail.com>
Signed-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      784e6a38
    • Alan Stern's avatar
      USB: OHCI: don't lose track of EDs when a controller dies · bb013738
      Alan Stern authored 
      commit 977dcfdc upstream.

This patch fixes a bug in ohci-hcd.  When an URB is unlinked, the
corresponding Endpoint Descriptor is added to the ed_rm_list and taken
off the hardware schedule.  Once the ED is no longer visible to the
hardware, finish_unlinks() handles the URBs that were unlinked or have
completed.  If any URBs remain attached to the ED, the ED is added
back to the hardware schedule -- but only if the controller is
running.

This fails when a controller dies.  A non-empty ED does not get added
back to the hardware schedule and does not remain on the ed_rm_list;
ohci-hcd loses track of it.  The remaining URBs cannot be unlinked,
which causes the USB stack to hang.

The patch changes finish_unlinks() so that non-empty EDs remain on
the ed_rm_list if the controller isn't running.  This requires moving
some of the existing code around, to avoid modifying the ED's hardware
fields more than once.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: keep using HC_IS_RUNNING()]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      bb013738
    • James Bottomley's avatar
      scsi: handle flush errors properly · 85cf4736
      James Bottomley authored 
      commit 89fb4cd1 upstream.

Flush commands don't transfer data and thus need to be special cased
in the I/O completion handler so that we can propagate errors to
the block layer and filesystem.
Signed-off-by: default avatarJames Bottomley <JBottomley@Parallels.com>
Reported-by: default avatarSteven Haber <steven@qumulo.com>
Tested-by: default avatarSteven Haber <steven@qumulo.com>
Reviewed-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      85cf4736
    • Vladimir Davydov's avatar
      Bluetooth: never linger on process exit · 07dd3b62
      Vladimir Davydov authored 
      commit 093facf3 upstream.

If the current process is exiting, lingering on socket close will make
it unkillable, so we should avoid it.

Reproducer:

  #include <sys/types.h>
  #include <sys/socket.h>

  #define BTPROTO_L2CAP   0
  #define BTPROTO_SCO     2
  #define BTPROTO_RFCOMM  3

  int main()
  {
          int fd;
          struct linger ling;

          fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM);
          //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP);
          //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO);

          ling.l_onoff = 1;
          ling.l_linger = 1000000000;
          setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling));

          return 0;
  }
Signed-off-by: default avatarVladimir Davydov <vdavydov@parallels.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      07dd3b62
    • Christoph Schulz's avatar
      x86: don't exclude low BIOS area when allocating address space for non-PCI cards · 209dc6f6
      Christoph Schulz authored 
      commit cbace46a upstream.

Commit 30919b0b ("x86: avoid low BIOS area when allocating address
space") moved the test for resource allocations that fall within the first
1MB of address space from the PCI-specific path to a generic path, such
that all resource allocations will avoid this area.  However, this breaks
ISA cards which need to allocate a memory region within the first 1MB.  An
example is the i82365 PCMCIA controller and derivatives like the Ricoh
RF5C296/396 which map part of the PCMCIA socket memory address space into
the first 1MB of system memory address space.  They do not work anymore as
no usable memory region exists due to this change:

  Intel ISA PCIC probe: Ricoh RF5C296/396 ISA-to-PCMCIA at port 0x3e0 ofs 0x00, 2 sockets
  host opts [0]: none
  host opts [1]: none
  ISA irqs (scanned) = 3,4,5,9,10 status change on irq 10
  pcmcia_socket pcmcia_socket1: pccard: PCMCIA card inserted into slot 1
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: excluding 0xcf8-0xcff
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
  pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3ff: excluding 0x170-0x177 0x1f0-0x1f7 0x2f8-0x2ff 0x370-0x37f 0x3c0-0x3e7 0x3f0-0x3ff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0a0000-0x0affff: excluding 0xa0000-0xaffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0b0000-0x0bffff: excluding 0xb0000-0xbffff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0c0000-0x0cffff: excluding 0xc0000-0xcbfff
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0d0000-0x0dffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0e0000-0x0effff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x60000000-0x60ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0xa0000000-0xa0ffffff: clean.
  pcmcia_socket pcmcia_socket1: cs: memory probe 0x0cc000-0x0effff: excluding 0xe0000-0xeffff
  pcmcia_socket pcmcia_socket1: cs: unable to map card memory!

If filtering out the first 1MB is reverted, everything works as expected.
Tested-by: default avatarRobert Resch <fli4l@robert.reschpara.de>
Signed-off-by: default avatarChristoph Schulz <develop@kristov.de>
Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      209dc6f6
    • Kevin Hao's avatar
      mtd/ftl: fix the double free of the buffers allocated in build_maps() · 6b59836f
      Kevin Hao authored 
      commit a152056c upstream.

I got the following panic on my fsl p5020ds board.

  Unable to handle kernel paging request for data at address 0x7375627379737465
  Faulting instruction address: 0xc000000000100778
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=24 CoreNet Generic
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-next-20140613 #145
  task: c0000000fe080000 ti: c0000000fe088000 task.ti: c0000000fe088000
  NIP: c000000000100778 LR: c00000000010073c CTR: 0000000000000000
  REGS: c0000000fe08aa00 TRAP: 0300   Not tainted  (3.15.0-next-20140613)
  MSR: 0000000080029000 <CE,EE,ME>  CR: 24ad2e24  XER: 00000000
  DEAR: 7375627379737465 ESR: 0000000000000000 SOFTE: 1
  GPR00: c0000000000c99b0 c0000000fe08ac80 c0000000009598e0 c0000000fe001d80
  GPR04: 00000000000000d0 0000000000000913 c000000007902b20 0000000000000000
  GPR08: c0000000feaae888 0000000000000000 0000000007091000 0000000000200200
  GPR12: 0000000028ad2e28 c00000000fff4000 c0000000007abe08 0000000000000000
  GPR16: c0000000007ab160 c0000000007aaf98 c00000000060ba68 c0000000007abda8
  GPR20: c0000000007abde8 c0000000feaea6f8 c0000000feaea708 c0000000007abd10
  GPR24: c000000000989370 c0000000008c6228 00000000000041ed c0000000fe00a400
  GPR28: c00000000017c1cc 00000000000000d0 7375627379737465 c0000000fe001d80
  NIP [c000000000100778] .__kmalloc_track_caller+0x70/0x168
  LR [c00000000010073c] .__kmalloc_track_caller+0x34/0x168
  Call Trace:
  [c0000000fe08ac80] [c00000000087e6b8] uevent_sock_list+0x0/0x10 (unreliable)
  [c0000000fe08ad20] [c0000000000c99b0] .kstrdup+0x44/0x90
  [c0000000fe08adc0] [c00000000017c1cc] .__kernfs_new_node+0x4c/0x130
  [c0000000fe08ae70] [c00000000017d7e4] .kernfs_new_node+0x2c/0x64
  [c0000000fe08aef0] [c00000000017db00] .kernfs_create_dir_ns+0x34/0xc8
  [c0000000fe08af80] [c00000000018067c] .sysfs_create_dir_ns+0x58/0xcc
  [c0000000fe08b010] [c0000000002c711c] .kobject_add_internal+0xc8/0x384
  [c0000000fe08b0b0] [c0000000002c7644] .kobject_add+0x64/0xc8
  [c0000000fe08b140] [c000000000355ebc] .device_add+0x11c/0x654
  [c0000000fe08b200] [c0000000002b5988] .add_disk+0x20c/0x4b4
  [c0000000fe08b2c0] [c0000000003a21d4] .add_mtd_blktrans_dev+0x340/0x514
  [c0000000fe08b350] [c0000000003a3410] .mtdblock_add_mtd+0x74/0xb4
  [c0000000fe08b3e0] [c0000000003a32cc] .blktrans_notify_add+0x64/0x94
  [c0000000fe08b470] [c00000000039b5b4] .add_mtd_device+0x1d4/0x368
  [c0000000fe08b520] [c00000000039b830] .mtd_device_parse_register+0xe8/0x104
  [c0000000fe08b5c0] [c0000000003b8408] .of_flash_probe+0x72c/0x734
  [c0000000fe08b750] [c00000000035ba40] .platform_drv_probe+0x38/0x84
  [c0000000fe08b7d0] [c0000000003599a4] .really_probe+0xa4/0x29c
  [c0000000fe08b870] [c000000000359d3c] .__driver_attach+0x100/0x104
  [c0000000fe08b900] [c00000000035746c] .bus_for_each_dev+0x84/0xe4
  [c0000000fe08b9a0] [c0000000003593c0] .driver_attach+0x24/0x38
  [c0000000fe08ba10] [c000000000358f24] .bus_add_driver+0x1c8/0x2ac
  [c0000000fe08bab0] [c00000000035a3a4] .driver_register+0x8c/0x158
  [c0000000fe08bb30] [c00000000035b9f4] .__platform_driver_register+0x6c/0x80
  [c0000000fe08bba0] [c00000000084e080] .of_flash_driver_init+0x1c/0x30
  [c0000000fe08bc10] [c000000000001864] .do_one_initcall+0xbc/0x238
  [c0000000fe08bd00] [c00000000082cdc0] .kernel_init_freeable+0x188/0x268
  [c0000000fe08bdb0] [c0000000000020a0] .kernel_init+0x1c/0xf7c
  [c0000000fe08be30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4
  Instruction dump:
  41bd0010 480000c8 4bf04eb5 60000000 e94d0028 e93f0000 7cc95214 e8a60008
  7fc9502a 2fbe0000 419e00c8 e93f0022 <7f7e482a> 39200000 88ed06b2 992d06b2
  ---[ end trace b4c9a94804a42d40 ]---

It seems that the corrupted partition header on my mtd device triggers
a bug in the ftl. In function build_maps() it will allocate the buffers
needed by the mtd partition, but if something goes wrong such as kmalloc
failure, mtd read error or invalid partition header parameter, it will
free all allocated buffers and then return non-zero. In my case, it
seems that partition header parameter 'NumTransferUnits' is invalid.

And the ftl_freepart() is a function which free all the partition
buffers allocated by build_maps(). Given the build_maps() is a self
cleaning function, so there is no need to invoke this function even
if build_maps() return with error. Otherwise it will causes the
buffers to be freed twice and then weird things would happen.
Signed-off-by: default avatarKevin Hao <haokexin@gmail.com>
Signed-off-by: default avatarBrian Norris <computersforpeace@gmail.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      6b59836f
    • Hans de Goede's avatar
      gspca_pac7302: Add new usb-id for Genius i-Look 317 · 2121cbd8
      Hans de Goede authored 
      commit 242841d3 upstream.
Tested-and-reported-by: default avataryullaw <yullaw@mageia.cz>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      2121cbd8
    • Antti Palosaari's avatar
      tda10071: force modulation to QPSK on DVB-S · 5248ee65
      Antti Palosaari authored 
      commit db4175ae upstream.

Only supported modulation for DVB-S is QPSK. Modulation parameter
contains invalid value for DVB-S on some cases, which leads driver
refusing tuning attempt. Due to that, hard code modulation to QPSK
in case of DVB-S.
Signed-off-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <m.chehab@samsung.com>
[bwh: Backported to 3.2: adjust filename]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      5248ee65
    • Peter Hurley's avatar
      serial: core: Preserve termios c_cflag for console resume · e6fad979
      Peter Hurley authored 
      commit ae84db96 upstream.

When a tty is opened for the serial console, the termios c_cflag
settings are inherited from the console line settings.
However, if the tty is subsequently closed, the termios settings
are lost. This results in a garbled console if the console is later
suspended and resumed.

Preserve the termios c_cflag for the serial console when the tty
is shutdown; this reflects the most recent line settings.

Fixes: Bugzilla #69751, 'serial console does not wake from S3'
Reported-by: default avatarValerio Vanni <valerio.vanni@inwind.it>
Acked-by: default avatarAlan Cox <alan@linux.intel.com>
Signed-off-by: default avatarPeter Hurley <peter@hurleysoftware.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: tty_struct::termios is a pointer]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      e6fad979
    • Steven Rostedt's avatar
      debugfs: Fix corrupted loop in debugfs_remove_recursive · e45a1a0b
      Steven Rostedt authored 
      commit 485d4402 upstream.

[ I'm currently running my tests on it now, and so far, after a few
 hours it has yet to blow up. I'll run it for 24 hours which it never
 succeeded in the past. ]

The tracing code has a way to make directories within the debugfs file
system as well as deleting them using mkdir/rmdir in the instance
directory. This is very limited in functionality, such as there is
no renames, and the parent directory "instance" can not be modified.
The tracing code creates the instance directory from the debugfs code
and then replaces the dentry->d_inode->i_op with its own to allow
for mkdir/rmdir to work.

When these are called, the d_entry and inode locks need to be released
to call the instance creation and deletion code. That code has its own
accounting and locking to serialize everything to prevent multiple
users from causing harm. As the parent "instance" directory can not
be modified this simplifies things.

I created a stress test that creates several threads that randomly
creates and deletes directories thousands of times a second. The code
stood up to this test and I submitted it a while ago.

Recently I added a new test that adds readers to the mix. While the
instance directories were being added and deleted, readers would read
from these directories and even enable tracing within them. This test
was able to trigger a bug:

 general protection fault: 0000 [#1] PREEMPT SMP
 Modules linked in: ...
 CPU: 3 PID: 17789 Comm: rmdir Tainted: G        W     3.15.0-rc2-test+ #41
 Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS SDBLI944.86P 05/08/2007
 task: ffff88003786ca60 ti: ffff880077018000 task.ti: ffff880077018000
 RIP: 0010:[<ffffffff811ed5eb>]  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
 RSP: 0018:ffff880077019df8  EFLAGS: 00010246
 RAX: 0000000000000002 RBX: ffff88006f0fe490 RCX: 0000000000000000
 RDX: dead000000100058 RSI: 0000000000000246 RDI: ffff88003786d454
 RBP: ffff88006f0fe640 R08: 0000000000000628 R09: 0000000000000000
 R10: 0000000000000628 R11: ffff8800795110a0 R12: ffff88006f0fe640
 R13: ffff88006f0fe640 R14: ffffffff81817d0b R15: ffffffff818188b7
 FS:  00007ff13ae24700(0000) GS:ffff88007d580000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: 0000003054ec7be0 CR3: 0000000076d51000 CR4: 00000000000007e0
 Stack:
  ffff88007a41ebe0 dead000000100058 00000000fffffffe ffff88006f0fe640
  0000000000000000 ffff88006f0fe678 ffff88007a41ebe0 ffff88003793a000
  00000000fffffffe ffffffff810bde82 ffff88006f0fe640 ffff88007a41eb28
 Call Trace:
  [<ffffffff810bde82>] ? instance_rmdir+0x15b/0x1de
  [<ffffffff81132e2d>] ? vfs_rmdir+0x80/0xd3
  [<ffffffff81132f51>] ? do_rmdir+0xd1/0x139
  [<ffffffff8124ad9e>] ? trace_hardirqs_on_thunk+0x3a/0x3c
  [<ffffffff814fea62>] ? system_call_fastpath+0x16/0x1b
 Code: fe ff ff 48 8d 75 30 48 89 df e8 c9 fd ff ff 85 c0 75 13 48 c7 c6 b8 cc d2 81 48 c7 c7 b0 cc d2 81 e8 8c 7a f5 ff 48 8b 54 24 08 <48> 8b 82 a8 00 00 00 48 89 d3 48 2d a8 00 00 00 48 89 44 24 08
 RIP  [<ffffffff811ed5eb>] debugfs_remove_recursive+0x1bd/0x367
  RSP <ffff880077019df8>

It took a while, but every time it triggered, it was always in the
same place:

	list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {

Where the child->d_u.d_child seemed to be corrupted.  I added lots of
trace_printk()s to see what was wrong, and sure enough, it was always
the child's d_u.d_child field. I looked around to see what touches
it and noticed that in __dentry_kill() which calls dentry_free():

static void dentry_free(struct dentry *dentry)
{
	/* if dentry was never visible to RCU, immediate free is OK */
	if (!(dentry->d_flags & DCACHE_RCUACCESS))
		__d_free(&dentry->d_u.d_rcu);
	else
		call_rcu(&dentry->d_u.d_rcu, __d_free);
}

I also noticed that __dentry_kill() unlinks the child->d_u.child
under the parent->d_lock spin_lock.

Looking back at the loop in debugfs_remove_recursive() it never takes the
parent->d_lock to do the list walk. Adding more tracing, I was able to
prove this was the issue:

 ftrace-t-15385   1.... 246662024us : dentry_kill <ffffffff81138b91>: free ffff88006d573600
    rmdir-15409   2.... 246662024us : debugfs_remove_recursive <ffffffff811ec7e5>: child=ffff88006d573600 next=dead000000100058

The dentry_kill freed ffff88006d573600 just as the remove recursive was walking
it.

In order to fix this, the list walk needs to be modified a bit to take
the parent->d_lock. The safe version is no longer necessary, as every
time we remove a child, the parent->d_lock must be released and the
list walk must start over. Each time a child is removed, even though it
may still be on the list, it should be skipped by the first check
in the loop:

		if (!debugfs_positive(child))
			continue;
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
[bwh: Backported to 3.2: deleted code is slightly different; we don't
 have list_next_entry()]
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      e45a1a0b
    • Dave Chiluk's avatar
      stable_kernel_rules: Add pointer to netdev-FAQ for network patches · 56dee47a
      Dave Chiluk authored 
      commit b76fc285 upstream.

Stable_kernel_rules should point submitters of network stable patches to the
netdev_FAQ.txt as requests for stable network patches should go to netdev
first.
Signed-off-by: default avatarDave Chiluk <chiluk@canonical.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      56dee47a
    • Christoph Hellwig's avatar
      block: don't assume last put of shared tags is for the host · 60d940c6
      Christoph Hellwig authored 
      commit d45b3279 upstream.

There is no inherent reason why the last put of a tag structure must be
the one for the Scsi_Host, as device model objects can be held for
arbitrary periods.  Merge blk_free_tags and __blk_free_tags into a single
funtion that just release a references and get rid of the BUG() when the
host reference wasn't the last.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarJens Axboe <axboe@fb.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      60d940c6
    • Sylwester Nawrocki's avatar
      ASoC: samsung: Correct I2S DAI suspend/resume ops · 5d42f37b
      Sylwester Nawrocki authored 
      commit d3d4e524 upstream.

We should save/restore relevant I2S registers regardless of
the dai->active flag, otherwise some settings are being lost
after system suspend/resume cycle. E.g. I2S slave mode set only
during dai initialization is not preserved and the device ends
up in master mode after system resume.
Signed-off-by: default avatarSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      5d42f37b
    • Nadav Amit's avatar
      KVM: x86: Inter-privilege level ret emulation is not implemeneted · 1217c0c7
      Nadav Amit authored 
      commit 9e8919ae upstream.

Return unhandlable error on inter-privilege level ret instruction.  This is
since the current emulation does not check the privilege level correctly when
loading the CS, and does not pop RSP/SS as needed.
Signed-off-by: default avatarNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      1217c0c7
  3. 06 Aug, 2014 22 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7