- 19 Jun, 2017 10 commits
-
-
git://github.com/hisilicon/linux-hisiOlof Johansson authored
ARM64: DT: Hisilicon SoC DT updates for 4.13 - Add and update Hi3660-Hikey960 board, Hi3660 PCIe RC, Hi6421v530 MFD and Hi3660 MMC binding - Add and refine devices support for Hi3660-Hikey 960 including clock, reset, I2C, GPIO, UART, Bluetooth, RTC, Power Key, LED, SPI, timer, PMIC, regulator, sd/sdio and WiFi - Add k3-dma and i2s/hdmi audio support based on audio-card-graph method for Hikey board * tag 'hisi-arm64-dt-for-4.13-v2' of git://github.com/hisilicon/linux-hisi: (21 commits) arm64: dts: hi6220: Add k3-dma and i2s/hdmi audio support arm64: dts: hi3660-hikey960: add nodes for WiFi arm64: dts: hi3660: add sd/sdio device nodes dt-bindings: mmc: dw_mmc-k3: add document of hi3660 mmc arm64: dts: hikey960: add device node for pmic and regulators dt-bindings: mfd: hi6421: Add hi6421v530 compatible string arm64: dts: hisi: add kirin pcie node dt-bindings: PCI: hisi: Add document for PCIe of Kirin SoCs arm64: dts: hi3660: add sp804 timer node arm64: dts: hi3660: add spi device nodes arm64: dts: hikey960: add LED nodes arm64: dts: hi3660: add power key dts node arm64: dts: hi3660: Add pl031 rtc node arm64: dts: hikey960: add WL1837 Bluetooth device node arm64: dts: hi3660: Add uarts nodes arm64: dts: hi3660: add gpio dtsi file for Hisilicon Hi3660 SOC arm64: dts: Add I2C nodes for Hi3660 arm64: dts: hi3660: add resources for clock and reset arm64: dts: hikey960: pinctrl: add more pinmux and pinconfig arm64: dts: hisilicon: update compatible string for hikey960 ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt64 ARMv8 Vexpress/Juno DT updates for v4.13 1. Adds support for Coresight CPU debug MMIO interface on all Juno variants. 2. Enables support for few SMMUs on Juno which were previously disabled waiting for IOMMU-backed DMA API support to be stabilised. * tag 'juno-updates-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: enable some SMMUs arm64: dts: juno: add coresight CPU debug nodes Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner H5 DT changes for 4.13 Just like the H3, this is mostly about enabling the EMAC on the H5, and also has a new board, the Orange Pi Zero Plus 2 * tag 'sunxi-dt-h5-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: h5: Add initial Orangepi Zero Plus 2 support arm64: allwinner: h5: enable dwmac-sun8i for Nano Pi NEO2 arm64: allwinner: h5: enable dwmac-sun8i for Orange Pi Prime arm64: allwinner: h5: sort the device nodes in / part for some boards arm64: allwinner: h5: add support for NanoPi NEO2 board arm64: allwinner: h5: add support for Orange Pi Prime board arm64: allwinner: orangepi-pc2: Enable dwmac-sun8i arm: sun8i: sunxi-h3-h5: add dwmac-sun8i ethernet driver arm: sun8i: sunxi-h3-h5: Add dt node for the syscon control module ARM: sunxi: h3-h5: Convert R_CCU raw numbers to macros Signed-off-by:
-
Olof Johansson authored
Merge tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner arm64 DT changes for 4.13 Our usual arm64 changes. The most notable things are the EMAC support and USB support enhancements. There's also support for the SoPine SoM, and the OrangePi Win. * tag 'sunxi-dt64-for-4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: a64: Add initial Orangepi Win/WinPlus support arm64: allwinner: a64: add device tree for SoPine with baseboard arm64: allwinner: bananapi-m64: Enable dwmac-sun8i arm64: allwinner: pine64-plus: Enable dwmac-sun8i arm64: allwinner: pine64: Enable dwmac-sun8i arm64: allwinner: sun50i-a64: add dwmac-sun8i Ethernet driver arm64: allwinner: sun50i-a64: Add dt node for the syscon control module arm64: allwinner: a64: add DTSI file for SoPine SoM arm64: allwinner: a64: Convert CCU raw number references to macros arm64: dts: allwinner: pine64: Prepare optional UART nodes with pinctrl arm64: allwinner: a64: enable RSB on A64 arm64: dts: allwinner: pine64: Add remaining UART aliases arm64: dts: allwinner: a64: Add UART2 pin nodes arm64: allwinner: a64: enable EHCI0/OHCI0 for Pine64 arm64: allwinner: a64: add EHCI0/OHCI0 nodes to A64 DTSI Signed-off-by:
-
Olof Johansson authored
Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64 Amlogic 64-bit DT changes for v4.13 - cleanup/reorganize alphabetically to better avoid conflicts - add HDMI and CVBS nodes for multiple boards - new pinctrl pins: SPI, HDMI CEC - SCPI: fix thermal sensor reporting New board support - NanoPi K2 (GXBB) - R-Box Pro (GXM) * tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits) ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes ARM64: dts: meson-gx: Fix sensors reporting from SCP ARM64: dts: meson-gxl: Add SPI pinctrl nodes ARM64: dts: meson-gxbb: Add SPI pinctrl nodes ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes ARM64: dts: meson-gxl: Add CEC pins nodes ARM64: dts: meson-gxbb: Add CEC pins nodes ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base ARM64: dts: Fix GXL periphs pinctrl pull-enable register base ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges arm64: dts: amlogic: Add NanoPi K2 dt-bindings: arm: amlogic: Add NanoPi K2 arm64: dts: meson-gxm: Add R-Box Pro dt-bindings: arm: amlogic: Add R-Box Pro dt-bindings: Add Kingnovel vendor prefix arm64: dts: meson-gx-p23x-q20x: Fix node order arm64: dts: meson-gxm-nexbox-a1: Fix node order ... Signed-off-by:
-
http://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for 4.13. Please note the following from Eric: I've based this summary on the bcm2835-dt-next tag, to clarify what's in this patch series, but it does require being careful since it involves a cross-merge between branches. - Anup documents the Broadcom Stingray binding, common clocks, adds initial support for the Stingray DTSI and DTS files and adds support for the PL022, PL330 and SP805 - Sandeep adds the clock nodes to the Stingray Device Tree nodes - Pramod adds support for the NAND, pinctrl, GPIO to the Stingray Device Tree nodes - Oza adds I2C Device Tree nodes to the Stingray DTSes - Srinath adds PWM and SDHCI Device Tree nodes for the Stingray SoC - Ravijeta adds support for the USB Dual Role PHY on Northstar 2 - Gerd starts adding references to the sdhost and sdhci controllers, and then switches the sdcard to to use the SDHOST (faster than SDHCI) - Stefan defines the BCM2837 thermal coefficients in order for the Raspberry Pi thermal driver to work correctly * tag 'arm-soc/for-4.13/devicetree-arm64' of http://github.com/Broadcom/stblinux: arm64: dts: NS2: Add USB DRD PHY device tree node ARM64: dts: bcm2837: Define CPU thermal coefficients arm64: dts: Add PWM and SDHCI DT nodes for Stingray SOC arm64: dts: Add PL022, PL330 and SP805 DT nodes for Stingray arm64: dts: Add I2C DT nodes for Stingray SoC arm64: dts: Add GPIO DT nodes for Stingray SOC arm64: dts: Add pinctrl DT nodes for Stingray SOC arm64: dts: Add NAND DT nodes for Stingray SOC arm64: dts: Add clock DT nodes for Stingray SOC arm64: dts: Initial DTS files for Broadcom Stingray SOC dt-bindings: clk: Extend binding doc for Stingray SOC dt-bindings: bcm: Add Broadcom Stingray bindings document ARM: dts: bcm283x: switch from &sdhci to &sdhost arm64: dts: bcm2837: add &sdhci and &sdhost ARM: dts: bcm283x: Add CPU thermal zone with 1 trip point ARM: dts: Add devicetree for the Raspberry Pi 3, for arm32 (v6) Signed-off-by:
-
Olof Johansson authored
Merge tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt64 UniPhier ARM64 SoC DT updates for v4.13 - specify timing delay properties of eMMC - fix W=1 build warnings - increase memory reserve size - use SPDX License Identifier - add new board support (LD11/LD20 global) * tag 'uniphier-dt64-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier: arm64: dts: uniphier: add support for LD20 Global board arm64: dts: uniphier: add support for LD11 Global board arm64: dts: uniphier: use SPDX-License-Identifier arm64: dts: uniphier: reserve more memory for LD11/LD20 arm64: dts: uniphier: fix simple-bus unit address format error arm64: dts: uniphier: Use - instead of @ for DT OPP entries arm64: dts: uniphier: add cdns, phy-dll-delay-sdclk(-hsmmc) for eMMC arm64: dts: uniphier: add input-delay properties to Cadence eMMC node Signed-off-by:
-
https://github.com/mbgg/linux-mediatekOlof Johansson authored
Add device tree nodes for mt8173: - split USB SuperSpeed port in HighSpeed and SuperSpeed ports. - move USB phy clocks up in hierarchy to met new bindings description - move MDP nodes up in hierarchy to met new bindings description mt6797: - add basic SoC support - add clock driver - add power domain dt-bindings: - clean-up i2c binding description - add binding for mt2701 i2c node - add fallback compatible to scpsys binding description - add bindings description for mt7622 and mt6796 * tag 'v4.12-next-dts64' of https://github.com/mbgg/linux-mediatek: dt-bindings: mediatek: add bindings for MediaTek MT7622 SoC arm64: dts: mt8173: Fix mdp device tree dt-bindings: i2c: Add Mediatek MT2701 i2c binding dt-bindings: i2c-mtk: Add mt7623 binding dt-bindings: i2c-mtk: Delete bindings dt-bindings: i2c-mt6577: Rename file to reflect bindings dt-bindings: mtk-sysirq: Correct bindings for supported SoCs arm64: dts: mediatek: add clk and scp nodes for MT6797 dt-bindings: mediatek: add MT6797 power dt-bindings arm64: dts: mediatek: add mt6797 support dt-bindings: mediatek: Add bindings for mediatek MT6797 Platform arm64: dts: mt8173: move clock from phy node into port nodes arm64: dts: mt8173: split usb SuperSpeed port into two ports Signed-off-by:
-
Olof Johansson authored
Merge tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt64 Samsung DeviceTree ARM64 update for v4.13: 1. Remove unneeded TE interrupt gpio property. * tag 'samsung-dt64-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: Remove the te-gpios property in the TM2 boards Signed-off-by:
-
Olof Johansson authored
Merge tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt64 Support for the new rk3399 firefly board; extending the pcie ranges to make usage of pci switches possible; some more qos and pinctrl nodes on rk3399; updates for the rk3399 cpu operating points including separate opps for the higher rates OP1 variant of the chip and mmc-nodes for the rk3328. * tag 'v4.13-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: update common rk3399 operating points arm64: dts: rockchip: introduce rk3399-op1 operating points arm64: dts: rockchip: enable usb3 controllers on rk3399-firefly arm64: dts: rockchip: add ethernet0 alias on rk3399 arm64: dts: rockchip: bring rk3399-firefly power-tree in line arm64: dts: rockchip: add sdmmc/sdio/emmc nodes for RK3328 SoCs arm64: dts: rockchip: extent IORESOURCE_MEM_64 of PCIe for rk3399 arm64: dts: rockchip: extent bus-ranges of PCIe for rk3399 arm64: dts: rockchip: add pinctrl settings for some rk3399 peripherals arm64: dts: rockchip: add some missing qos nodes on rk3399 arm64: dts: rockchip: add support for firefly-rk3399 board dt-bindings: add firefly-rk3399 board support Signed-off-by:
-
- 16 Jun, 2017 7 commits
-
-
John Stultz authored
Add entry for k3-dma driver and i2s/hdmi audio devices. This enables HDMI audio output. Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Andy Green <andy@warmcat.com> Cc: Dave Long <dave.long@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Antonio Borneo <borneo.antonio@gmail.com> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
John Stultz <john.stultz@linaro.org> v2: * Split core i2s entry into dtsi and hdmi specific bits into hikey dts v4: * Rework simple-card to use many-dai-links method, as there may be other links in the future v5: * Rework audio description to use the audio-card-graph method as requested by Mark. Signed-off-by:
Wei Xu <xuwei5@hisilicon.com>
-
Guodong Xu authored
Add nodes for WiFi. HiKey960 is using TI WL1837MOD module. Signed-off-by:
Guodong Xu <guodong.xu@linaro.org> Signed-off-by:
-
Li Wei authored
Add sd/sdio device nodes for hi3660 soc Signed-off-by:
Li Wei <liwei213@huawei.com> Signed-off-by:
Chen Jun <chenjun14@huawei.com> Signed-off-by:
-
Guodong Xu authored
Add bindings for hi3660 mmc support Signed-off-by:
-
Wang Xiaoyin authored
add device node for hi6421 pmic core and hi6421v530 voltage regulator,include LDO(1,3,9,11,15,16) Signed-off-by:
Wang Xiaoyin <hw.wangxiaoyin@hisilicon.com> Signed-off-by:
-
Guodong Xu authored
Add compatible string for HiSilicon Hi6421v530 PMIC. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Xiaowei Song authored
Add PCIe node for hi3660 Cc: Guodong Xu <guodong.xu@linaro.org> Signed-off-by:
Xiaowei Song <songxiaowei@hisilicon.com> Acked-by:
-
- 15 Jun, 2017 14 commits
-
-
Xiaowei Song authored
This patch adds document for PCIe of Kirin SoC series. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Leo Yan authored
The Hi3660 SoC comes with the sp804 timer in addition to the architecture timers. These ones are shutdown when reaching a deep idle states and a backup timer is needed. The sp804 belongs to another power domain and can fulfill the purpose of replacing temporarily an architecture timer when the CPU is idle. Describe it in the device tree, so it can be enabled at boot time. Suggested-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by:
Leo Yan <leo.yan@linaro.org> Signed-off-by:
-
Wang Xiaoyin authored
Add spi2 and spi3 device nodes for hi3660, and enable them for hikey960. On HiKey960: - SPI2 is wired out through low speed expansion connector. - SPI3 is wired out through high speed expansion connector. Signed-off-by:
-
Guodong Xu authored
HiKey960 has four user LEDs, and two special purpose LEDs: WiFi and BT respectively. All of them are implemented as GPIO. Signed-off-by:
-
Chen Jun authored
We use gpio_034 as power key on hikey960, and set gpio with pull-up state, when key press the voltage on the gpio will come to lower, and power key event will be reported. Signed-off-by:
-
Chen Feng authored
Add dts node to enable pl031 rtc. Signed-off-by:
Chen Feng <puck.chen@hisilicon.com> Acked-by:
-
Guodong Xu authored
This adds the serial slave device for the WL1837 Bluetooth interface. Signed-off-by:
-
Chen Feng authored
Add nodes uart0 to uart4 and uart6 for hi3660 SoC. Enable uart3 and uart6, disable uart5, in hikey960 board dts. On HiKey960: - UART6 is used as default console, and is wired out through low speed expansion connector. - UART3 has RTS/CTS hardware handshake, and is wired out through low speed expansion connector. - UART5 is not used in commercial launched boards. So disable it. - UART4 is connected to Bluetooth, WL1837. Signed-off-by:Zhangfei Gao <zhangfei.gao@hisilicon.com> Signed-off-by:
-
Wang Xiaoyin authored
This patch adds pl061 device nodes for Hi3660 SoC. Signed-off-by:
-
Zhangfei Gao authored
Add I2C nodes for Hi3660-hikey960. On HiKey960, I2C0, I2C7 are connected to Low Speed Expansion Connector. I2C1 is connected to ADV7535. I2C3 is connected to USB5734. Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by:
-
Zhangfei Gao authored
Add some resource nodes for clock and reset Signed-off-by:
-
Wang Xiaoyin authored
This commit adds more pinmux and pinctrl information for devices on HiKey960, including i2c, spi, cam, uart, ufs, pcie, csi, pwr_key, isp, sd/sdio, i2s, and usb. Signed-off-by:
-
Guodong Xu authored
Update compatible string for hikey960. HiKey960 is a develpment board built with SoC Hi3660. Signed-off-by:
-
Guodong Xu authored
Add bindings for HiKey960 Board. Signed-off-by:
-
- 13 Jun, 2017 3 commits
-
-
Florian Fainelli authored
This pull request brings in the switch to sdhost for MMC on RPi3 (improving storage performance and leaving sdhci for wireless), and the correct CPU thermal coefficients. The thermal changes required a merge from bcm2835-dt-next, where the nodes were added. Signed-off-by:Florian Fainelli <f.fainelli@gmail.com>
-
Jagan Teki authored
Orangepi Zero Plus 2 is an open-source single-board computer using the Allwinner h5 SOC. H5 Orangepi Zero Plus 2 has - Quad-core Cortex-A53 - 512MB DDR3 - micrSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG+power supply Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com>
-
Jagan Teki authored
Orangepi Win/WinPlus is an open-source single-board computer using the Allwinner A64 SOC. A64 Orangepi Win/WinPlus has - A64 Quad-core Cortex-A53 64bit - 1GB(Win)/2GB(Win Plus) DDR3 SDRAM - Debug TTL UART - Four USB 2.0 - HDMI - LCD - Audio and MIC - Wifi + BT - IR receiver - 5V DC power supply Signed-off-by:
-
- 12 Jun, 2017 2 commits
-
-
Kunihiko Hayashi authored
Add initial device tree support for LD20 Global board. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com>
-
Kunihiko Hayashi authored
Add initial device tree support for LD11 Global board. Signed-off-by:
-
- 09 Jun, 2017 4 commits
-
-
Neil Armstrong authored
Add HDMI and CVBS nodes for the Amlogic P212 reference board. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com>
-
Neil Armstrong authored
Add HDMI nodes for the Khadas Vim board. Signed-off-by:
-
Neil Armstrong authored
Add HDMI nodes for the Amlogic P230 board. Signed-off-by:
-
Neil Armstrong authored
Add HDMI and CVBS nodes for the Wetek Play2 board. Signed-off-by:
-
