When CONFIG_ARCH_SUNXI is not set but CONFIG_COMPILE_TEST=y,
CONFIG_HAVE_CLK=y, CONFIG_HAVE_LEGACY_CLK=y, there exists
the following build errors with CONFIG_PHY_SUN6I_MIPI_DPHY=y:

drivers/phy/allwinner/phy-sun6i-mipi-dphy.o: In function `sun6i_dphy_init':
phy-sun6i-mipi-dphy.c:(.text+0x320): undefined reference to `clk_set_rate_exclusive'
drivers/phy/allwinner/phy-sun6i-mipi-dphy.o: In function `sun6i_dphy_exit':
phy-sun6i-mipi-dphy.c:(.text+0x2c8): undefined reference to `clk_rate_exclusive_put'

clk_set_rate_exclusive() and clk_rate_exclusive_put() are defined
in drivers/clk/clk.c, this file is built under CONFIG_COMMON_CLK,
so in order to build drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
successful used with various configs, CONFIG_PHY_SUN6I_MIPI_DPHY
should depend on CONFIG_COMMON_CLK.

Fixes: 133552bf ("phy: Remove CONFIG_ARCH_* check for related subdir in Makefile")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1594113746-25393-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Vinod Koul <vkoul@kernel.org>

It fixes RX detect wakeup using USB3 device, otherwise, the USB3
device can't wakeup USB PHY when the PHY is in 32Khz clock.

Fixes: 50d35aa8 ("phy: cadence: salvo: add salvo phy driver")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200703064600.14181-1-peter.chen@nxp.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

sun6i_dphy_ops and sun6i_dphy_regmap_config are not modified so make them
const structs to allow the compiler to put them in read-only memory.

Before:
   text    data     bss     dec     hex filename
   4407    1944      64    6415    190f drivers/phy/allwinner/phy-sun6i-mipi-dphy.o

After:
   text    data     bss     dec     hex filename
   4835    1496      64    6395    18fb drivers/phy/allwinner/phy-sun6i-mipi-dphy.o
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200629195727.9717-1-rikard.falkeborn@gmail.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

ti_pipe3_power_on() sets variable 'ret' but never uses it, so remove it.

drivers/phy/ti/phy-ti-pipe3.c:340:6: warning: variable ‘ret’ set but not
used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200629145010.122675-4-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

dm816x_usb_phy_init() sets variable 'error' but never uses it, so remove
it.

drivers/phy/ti/phy-dm816x-usb.c:85:6: warning: variable ‘error’ set but
not used [-Wunused-but-set-variable]

Link: https://lore.kernel.org/r/20200629145010.122675-3-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Some function arguments are missing from documentation prompting
validation kernel doc script to complain:

drivers/phy/phy-core.c:1078: warning: Function parameter or member
'children' not described in '__devm_of_phy_provider_register'
drivers/phy/phy-core.c:1125: warning: Function parameter or member
'phy_provider' not described in 'devm_of_phy_provider_unregister'

Add the documentation for these

Link: https://lore.kernel.org/r/20200629145010.122675-2-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Documentation/process/coding-style.rst says:
"functions: they have the opening brace at the beginning of the next
line"

devm_of_phy_provider_unregister() function has opening brace at same
line, so fix it up.

Link: https://lore.kernel.org/r/20200629145010.122675-1-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

The UFS specific QMP PHY driver started off supporting the 14nm and
20nm hardware. With the 20nm support marked broken for a long time and
the 14nm support added to the common QMP PHY, this driver has not been
used in a while. So delete it
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200629145452.123035-1-vkoul@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Mark xpsgtr_suspend and xpsgtr_resume as __maybe_unused to fix the
following compiler warning when building with !CONFIG_PM_SLEEP:

drivers/phy/xilinx/phy-zynqmp.c:830:12: warning: ‘xpsgtr_resume’ defined but not used [-Wunused-function]
  830 | static int xpsgtr_resume(struct device *dev)
      |            ^~~~~~~~~~~~~
drivers/phy/xilinx/phy-zynqmp.c:819:12: warning: ‘xpsgtr_suspend’ defined but not used [-Wunused-function]
  819 | static int xpsgtr_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~

Also drop the existing #ifdef CONFIG_PM so the functions are always
compile-checked regardless of CONFIG_PM and/or CONFIG_PM_SLEEP being
set.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20200701141017.26931-1-tklauser@distanz.chSigned-off-by: Vinod Koul <vkoul@kernel.org>

The DT examples are by default compiled in a parent that has
 #address-cells and #size-cells both set to 1. Fix the example
accordingly, even if it doesn't match the actual hardware, as this is
the recommended practice for DT bindings examples.

Fixes: cea0f76a ("dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200701134853.30656-1-laurent.pinchart@ideasonboard.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Xilinx ZynqMP SoCs have a Gigabit Transceiver with four lanes. All the
high speed peripherals such as USB, SATA, PCIE, Display Port and
Ethernet SGMII can rely on any of the four GT lanes for PHY layer. This
patch adds driver for that ZynqMP GT core.
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200629120054.29338-3-laurent.pinchart@ideasonboard.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed
Processing System Gigabit Transceiver which provides PHY capabilities to
USB, SATA, PCIE, Display Port and Ehernet SGMII controllers.
Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200629120054.29338-2-laurent.pinchart@ideasonboard.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The set mode handler is used to keep track of the current role of the
device.  This is used for enabling certain resources within the PHY
depending on if the device is behaving as a host or device.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20200625195444.15130-3-wcheng@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Allow for the PHY to be put into a powered down state when possible.
Add the required suspend and resume callbacks, which will determine
what resources can be turned off depending on the cable status.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/20200625195444.15130-2-wcheng@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add both the DP and UNI PHY for primary/secondary usb controllers.

The tables are very similar to sm8150 (serdes_tbl is identical), but there
are some differences.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200524021416.17049-4-jonathan@marek.caSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add support for the USB3 PHY used by the secondary usb controller on sm8150
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200524021416.17049-3-jonathan@marek.caSigned-off-by: Vinod Koul <vkoul@kernel.org>

The primary USB PHY on sm8250 sets some values differently for the second
lane. This makes it possible to represent that.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200524021416.17049-2-jonathan@marek.caSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add ipq8074 qusb2 device compatible for high speed usb support.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Tested-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Sricharan R <sricharan@codeaurora.org>
Link: https://lore.kernel.org/r/1591625479-4483-5-git-send-email-sivaprak@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add QMP USB PHY found in IPQ8074
Co-developed-by: Balaji Prakash J <bjagadee@codeaurora.org>
Signed-off-by: Balaji Prakash J <bjagadee@codeaurora.org>
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Tested-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1591625479-4483-4-git-send-email-sivaprak@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add ipq8074 compatible in QUSB2 PHY for high speed USB support.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Tested-by: Sricharan R <sricharan@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1591625479-4483-3-git-send-email-sivaprak@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Add ipq8074 qmp phy device compatible for super speed usb support.
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Tested-by: Sricharan R <sricharan@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1591625479-4483-2-git-send-email-sivaprak@codeaurora.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.

"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.

The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

Link: https://lore.kernel.org/r/20200617152803.17941-1-krzk@kernel.orgSigned-off-by: Vinod Koul <vkoul@kernel.org>

If CONFIG_ARCH_ROCKCHIP is not set but COMPILE_TEST is set, the file in
the subdir rockchip can not be built due to CONFIG_ARCH_ROCKCHIP check
in drivers/phy/Makefile.

Since the related configs in drivers/phy/rockchip/Kconfig depend on
ARCH_ROCKCHIP, so remove CONFIG_ARCH_ROCKCHIP check for subdir rockchip
in drivers/phy/Makefile.

The other CONFIG_ARCH_* about allwinner, amlogic, mediatek, renesas and
tegra have the same situation, so remove them too.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/1590412138-13903-2-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Vinod Koul <vkoul@kernel.org>

Pull SafeSetID update from Micah Morton:
 "Add additional LSM hooks for SafeSetID

  SafeSetID is capable of making allow/deny decisions for set*uid calls
  on a system, and we want to add similar functionality for set*gid
  calls.

  The work to do that is not yet complete, so probably won't make it in
  for v5.8, but we are looking to get this simple patch in for v5.8
  since we have it ready.

  We are planning on the rest of the work for extending the SafeSetID
  LSM being merged during the v5.9 merge window"

* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
  security: Add LSM hooks to set*gid syscalls

The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <thomascedeno@google.com>
Signed-off-by: Micah Morton <mortonm@chromium.org>

Pull btrfs updates from David Sterba:
 "This reverts the direct io port to iomap infrastructure of btrfs
  merged in the first pull request. We found problems in invalidate page
  that don't seem to be fixable as regressions or without changing iomap
  code that would not affect other filesystems.

  There are four reverts in total, but three of them are followup
  cleanups needed to revert a43a67a2 cleanly. The result is the
  buffer head based implementation of direct io.

  Reverts are not great, but under current circumstances I don't see
  better options"

* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Revert "btrfs: switch to iomap_dio_rw() for dio"
  Revert "fs: remove dio_end_io()"
  Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
  Revert "btrfs: split btrfs_direct_IO to read and write part"

Pull networking fixes from David Miller:

 1) Fix cfg80211 deadlock, from Johannes Berg.

 2) RXRPC fails to send norigications, from David Howells.

 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
    Geliang Tang.

 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.

 5) The ucc_geth driver needs __netdev_watchdog_up exported, from
    Valentin Longchamp.

 6) Fix hashtable memory leak in dccp, from Wang Hai.

 7) Fix how nexthops are marked as FDB nexthops, from David Ahern.

 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.

 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.

10) Fix link speed reporting in iavf driver, from Brett Creeley.

11) When a channel is used for XSK and then reused again later for XSK,
    we forget to clear out the relevant data structures in mlx5 which
    causes all kinds of problems. Fix from Maxim Mikityanskiy.

12) Fix memory leak in genetlink, from Cong Wang.

13) Disallow sockmap attachments to UDP sockets, it simply won't work.
    From Lorenz Bauer.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
  net: ethernet: ti: ale: fix allmulti for nu type ale
  net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
  net: atm: Remove the error message according to the atomic context
  bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
  libbpf: Support pre-initializing .bss global variables
  tools/bpftool: Fix skeleton codegen
  bpf: Fix memlock accounting for sock_hash
  bpf: sockmap: Don't attach programs to UDP sockets
  bpf: tcp: Recv() should return 0 when the peer socket is closed
  ibmvnic: Flush existing work items before device removal
  genetlink: clean up family attributes allocations
  net: ipa: header pad field only valid for AP->modem endpoint
  net: ipa: program upper nibbles of sequencer type
  net: ipa: fix modem LAN RX endpoint id
  net: ipa: program metadata mask differently
  ionic: add pcie_print_link_status
  rxrpc: Fix race between incoming ACK parser and retransmitter
  net/mlx5: E-Switch, Fix some error pointer dereferences
  net/mlx5: Don't fail driver on failure to create debugfs
  net/mlx5e: CT: Fix ipv6 nat header rewrite actions
  ...

This reverts commit a43a67a2.

This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.

The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.

Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.

There have been discussions how to fix that, but revert seems to be the
least intrusive option.

Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: David Sterba <dsterba@suse.com>

On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.

This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").

Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().

Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.

Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
pull-request: bpf 2020-06-12

The following pull-request contains BPF updates for your *net* tree.

We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).

The main changes are:

1) sock_hash accounting fix, from Andrey.

2) libbpf fix and probe_mem sanitizing, from Andrii.

3) sock_hash fixes, from Jakub.

4) devmap_val fix, from Jesper.

5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull more cifs updates from Steve French:
 "12 cifs/smb3 fixes, 2 for stable.

   - add support for idsfromsid on create and chgrp/chown allowing
     ability to save owner information more naturally for some workloads

   - improve query info (getattr) when SMB3.1.1 posix extensions are
     negotiated by using new query info level"

* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Add debug message for new file creation with idsfromsid mount option
  cifs: fix chown and chgrp when idsfromsid mount option enabled
  smb3: allow uid and gid owners to be set on create with idsfromsid mount option
  smb311: Add tracepoints for new compound posix query info
  smb311: add support for using info level for posix extensions query
  smb311: Add support for lookup with posix extensions query info
  smb311: Add support for SMB311 query info (non-compounded)
  SMB311: Add support for query info using posix extensions (level 100)
  smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
  smb3: fix typo in mount options displayed in /proc/mounts
  cifs: Add get_security_type_str function to return sec type.
  smb3: extend fscache mount volume coherency check

Let's keep "git status" happy and quiet.

Fixes: 9762dc14 ("samples: add binderfs sample program
Fixes: fca5e949 ("samples: binderfs: really compile this sample and fix build issues")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.

See commit a7f7f624 ("treewide: replace '---help---' in Kconfig
files with 'help'")

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues

Pull more SCSI updates from James Bottomley:
 "This is the set of changes collected since just before the merge
  window opened. It's mostly minor fixes in drivers.

  The one non-driver set is the three optical disk (sr) changes where
  two are error path fixes and one is a helper conversion.

  The big driver change is the hpsa compat_alloc_userspace rework by Al
  so he can kill the remaining user. This has been tested and acked by
  the maintainer"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
  scsi: acornscsi: Fix an error handling path in acornscsi_probe()
  scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
  scsi: cxlflash: Remove an unnecessary NULL check
  scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
  scsi: sr: Fix sr_probe() missing deallocate of device minor
  scsi: sr: Fix sr_probe() missing mutex_destroy
  scsi: st: Convert convert get_user_pages() --> pin_user_pages()
  scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
  scsi: target: Fix NULL pointer dereference
  scsi: target: Initialize LUN in transport_init_se_cmd()
  scsi: target: Factor out a new helper, target_cmd_init_cdb()
  scsi: hpsa: hpsa_ioctl(): Tidy up a bit
  scsi: hpsa: Get rid of compat_alloc_user_space()
  scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
  scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
  scsi: ufs: Remove redundant urgent_bkop_lvl initialization
  scsi: ufs: Don't update urgent bkops level when toggling auto bkops
  scsi: qedf: Remove redundant initialization of variable rc
  scsi: mpt3sas: Fix memset() in non-RDPQ mode
  scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
  ...

Pull i2c updates from Wolfram Sang:
 "I2C has quite some patches for you this time. I hope it is the move to
  per-driver-maintainers which is now showing results. We will see.

  The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
  larger refactoring of the Designware, Tegra, and PXA drivers, the
  Cadence driver supports being a slave now, and there is support to
  instanciate SPD eeproms for well-known cases (which will be
  user-visible because the i801 driver supports it), and some
  devm_platform_ioremap_resource() conversions which blow up the
  diffstat.

  Note that I applied the Nuvoton driver quite late, so some minor fixup
  patches arrived during the merge window. I chose to apply them right
  away because they were trivial"

* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
  i2c: Drop stray comma in MODULE_AUTHOR statements
  i2c: npcm7xx: npcm_i2caddr[] can be static
  MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
  i2c: npcm7xx: Fix a couple of error codes in probe
  i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
  i2c: npcm7xx: Remove unnecessary parentheses
  i2c: npcm7xx: Add support for slave mode for Nuvoton
  i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
  dt-bindings: i2c: npcm7xx: add NPCM I2C controller
  i2c: pxa: don't error out if there's no pinctrl
  i2c: add 'single-master' property to generic bindings
  i2c: designware: Add Baikal-T1 System I2C support
  i2c: designware: Move reg-space remapping into a dedicated function
  i2c: designware: Retrieve quirk flags as early as possible
  i2c: designware: Convert driver to using regmap API
  i2c: designware: Discard Cherry Trail model flag
  i2c: designware: Add Baytrail sem config DW I2C platform dependency
  i2c: designware: slave: Set DW I2C core module dependency
  i2c: designware: Use `-y` to build multi-object modules
  dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
  ...

Pull more media updates from Mauro Carvalho Chehab:

 - a set of atomisp patches. They remove several abstraction layers, and
   fixes clang and gcc warnings (that were hidden via some macros that
   were disabling 4 or 5 types of warnings there). There are also some
   important fixes and sensor auto-detection on newer BIOSes via ACPI
   _DCM tables.

 - some fixes

* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
  media: rkvdec: Fix H264 scaling list order
  media: v4l2-ctrls: Unset correct HEVC loop filter flag
  media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
  media: v4l2-subdev.rst: correct information about v4l2 events
  media: s5p-mfc: Properly handle dma_parms for the allocated devices
  media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
  media: cedrus: Implement runtime PM
  media: cedrus: Program output format during each run
  media: atomisp: improve ACPI/DMI detection logs
  media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
  media: Revert "media: atomisp: Add some ACPI detection info"
  media: atomisp: improve sensor detection code to use _DSM table
  media: atomisp: get rid of an iomem abstraction layer
  media: atomisp: get rid of a string_support.h abstraction layer
  media: atomisp: use strscpy() instead of less secure variants
  media: atomisp: set DFS to MAX if sensor doesn't report fps
  media: atomisp: use different dfs failed messages
  media: atomisp: change the detection of ISP2401 at runtime
  media: atomisp: use macros from intel-family.h
  media: atomisp: don't set hpll_freq twice with different values
  ...