* New code correctly calculates SMC registers values, adjusts calculated
  to admissible ranges, enlarges cycles when required and converts values
  into SMC's format.
* Support for TDF cycles (ATA t6z) and IORDY line added.
* Eliminate need in the initial_timing structure.
* Code cleanup.
Signed-off-by: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

This is a cosmetic change to prevent libata-sff adding irq
descriptions to dummy ports, since the information, while largely
unused, is erroneous.
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

The old IDE cmd64x checks the status of the CNTRL register to see if
the ports are enabled before probing them.  pata_cmd64x doesn't do
this, which causes a HPMC on parisc when it tries to poke at the
secondary port because apparently the BAR isn't wired up (and a
non-responding piece of memory causes a HPMC).

Fix this by porting the CNTRL register port detection logic from IDE
cmd64x.  In addition, following converns from Alan Cox, add a check to
see if a mobility electronics bridge is the immediate parent and forgo
the check if it is (prevents problems on hotplug controllers).
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

ae01b249 (libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65)
added ATA_FLAG_NO_DIPM and made ata_eh_set_lpm() check the flag.
However, @ap is NULL if @link points to a PMP link and thus the
unconditional @ap->flags dereference leads to the following oops.

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
  IP: [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
  ...
  Pid: 295, comm: scsi_eh_4 Tainted: P            2.6.38.5-core2 #1 System76, Inc. Serval Professional/Serval Professional
  RIP: 0010:[<ffffffff813f98e1>]  [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
  RSP: 0018:ffff880132defbf0  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff880132f40000 RCX: 0000000000000000
  RDX: ffff88013377c000 RSI: ffff880132f40000 RDI: 0000000000000000
  RBP: ffff880132defce0 R08: ffff88013377dc58 R09: ffff880132defd98
  R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000
  R13: 0000000000000000 R14: ffff88013377c000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8800bf700000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 0000000000000018 CR3: 0000000001a03000 CR4: 00000000000406e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process scsi_eh_4 (pid: 295, threadinfo ffff880132dee000, task ffff880133b416c0)
  Stack:
   0000000000000000 ffff880132defcc0 0000000000000000 ffff880132f42738
   ffffffff813ee8f0 ffffffff813eefe0 ffff880132defd98 ffff88013377f190
   ffffffffa00b3e30 ffffffff813ef030 0000000032defc60 ffff880100000000
  Call Trace:
   [<ffffffff81400867>] sata_pmp_error_handler+0x607/0xc30
   [<ffffffffa00b273f>] ahci_error_handler+0x1f/0x70 [libahci]
   [<ffffffff813faade>] ata_scsi_error+0x5be/0x900
   [<ffffffff813cf724>] scsi_error_handler+0x124/0x650
   [<ffffffff810834b6>] kthread+0x96/0xa0
   [<ffffffff8100cd64>] kernel_thread_helper+0x4/0x10
  Code: 8b 95 70 ff ff ff b8 00 00 00 00 48 3b 9a 10 2e 00 00 48 0f 44 c2 48 89 85 70 ff ff ff 48 8b 8d 70 ff ff ff f6 83 69 02 00 00 01 <48> 8b 41 18 0f 85 48 01 00 00 48 85 c9 74 12 48 8b 51 08 48 83
  RIP  [<ffffffff813f98e1>] ata_eh_recover+0x9a1/0x1510
   RSP <ffff880132defbf0>
  CR2: 0000000000000018

Fix it by testing @link->ap->flags instead.

stable: ATA_FLAG_NO_DIPM was added during 2.6.39 cycle but was
        backported to 2.6.37 and 38.  This is a fix for that and thus
        also applicable to 2.6.37 and 38.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Nathan A. Mourey II" <nmoureyii@ne.rr.com>
LKML-Reference: <1304555277.2059.2.camel@localhost.localdomain>
Cc: Connor H <cmdkhh@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: Wire up syscalls new to 2.6.39
  alpha: convert to clocksource_register_hz

Wire up the syscalls:
   name_to_handle_at
   open_by_handle_at
   clock_adjtime
   syncfs
and adjust some whitespace in the neighbourhood to align commments.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Converts alpha to use clocksource_register_hz.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
CC: Richard Henderson <rth@twiddle.net>
CC: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
CC: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bridge: fix forwarding of IPv6
  bonding,llc: Fix structure sizeof incompatibility for some PDUs
  ipv6: restore correct ECN handling on TCP xmit
  ne-h8300: Fix regression caused during net_device_ops conversion
  hydra: Fix regression caused during net_device_ops conversion
  zorro8390: Fix regression caused during net_device_ops conversion
  sfc: Always map MCDI shared memory as uncacheable
  ehea: Fix memory hotplug oops
  libertas: fix cmdpendingq locking
  iwlegacy: fix IBSS mode crashes
  ath9k: Fix a warning due to a queued work during S3 state
  mac80211: don't start the dynamic ps timer if not associated

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFSv4.1: Ensure that layoutget uses the correct gfp modes
  NFSv4.1: remove pnfs_layout_hdr from pnfs_destroy_all_layouts tmp_list
  NFSv41: Resend on NFS4ERR_RETRY_UNCACHED_REP

The commit 6b1e960f
    bridge: Reset IPCB when entering IP stack on NF_FORWARD
broke forwarding of IPV6 packets in bridge because it would
call bp_parse_ip_options with an IPV6 packet.
Reported-by: Noah Meyerhans <noahm@debian.org>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

My Q67 / i7-2600 box has rev09 Sandy Bridge graphics.  It hangs
instantly when GNOME loads and it hangs so hard the reset button
doesn't work.  Setting i915.semaphore=0 fixes it.

Semaphores were disabled in a1656b90 ("drm/i915: Disable GPU
semaphores by default") in 2.6.38 but were then re-enabled (by mistake?)
by the merge 47ae63e0 ("Merge branch 'drm-intel-fixes' into
drm-intel-next").

(It's worth noting that the offending change is i915_drv.c, which was
not marked as a conflict - although a 'git show --cc' on the merge does
show that neither parent had it set to 1)
Signed-off-by: Andy Lutomirski <luto@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With some combinations of arch/compiler (e.g. arm-linux-gcc) the sizeof
operator on structure returns value greater than expected. In cases when the
structure is used for mapping PDU fields it may lead to unexpected results
(such as holes and alignment problems in skb data). __packed prevents this
undesired behavior.
Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's a hot function, and we're better off not mixing types in the mask
calculations.  The compiler just ends up mixing 16-bit and 32-bit
operations, for no good reason.

So do everything in 'unsigned int' rather than mixing 'unsigned int'
masking with a 'umode_t' (16-bit) mode variable.

This, together with the parent commit (47a150ed: "Cache user_ns in
struct cred") makes acl_permission_check() much nicer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If !CONFIG_USERNS, have current_user_ns() defined to (&init_user_ns).

Get rid of _current_user_ns.  This requires nsown_capable() to be
defined in capability.c rather than as static inline in capability.h,
so do that.

Request_key needs init_user_ns defined at current_user_ns if
!CONFIG_USERNS, so forward-declare that in cred.h if !CONFIG_USERNS
at current_user_ns() define.

Compile-tested with and without CONFIG_USERNS.
Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com>
[ This makes a huge performance difference for acl_permission_check(),
  up to 30%.  And that is one of the hottest kernel functions for loads
  that are pathname-lookup heavy.  ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: delete debugging printks from filename_trans rule processing

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  net/9p/protocol.c: Fix a memory leak

* 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c: pnx: Fix crash due to wrong init of timer->data

alg_data is already a pointer which must be passed directly.
Reported-by: Dieter Ripp <ripp@systecnet.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ben Dooks <ben-i2c@fluff.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

Since commit e9df2e8f (Use appropriate sock tclass setting for
routing lookup) we lost ability to properly add ECN codemarks to ipv6
TCP frames.

It seems like TCP_ECN_send() calls INET_ECN_xmit(), which only sets the
ECN bit in the IPv4 ToS field (inet_sk(sk)->tos), but after the patch,
what's checked is inet6_sk(sk)->tclass, which is a completely different
field.

Close bug https://bugzilla.kernel.org/show_bug.cgi?id=34322

[Eric Dumazet] : added the INET_ECN_dontxmit() fix and replace macros
by inline functions for clarity.
Signed-off-by: Steinar H. Gunderson <sgunderson@bigfoot.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

kptr_restrict has been triggering bugs in apps such as perf, and it also makes
the system less useful by default, so turn it off by default.

This is how we generally handle security features that remove functionality,
such as firewall code or SELinux - they have to be configured and activated
from user-space.

Distributions can turn kptr_restrict on again via this line in
/etc/sysctrl.conf:

kernel.kptr_restrict = 1

( Also mark the variable __read_mostly while at it, as it's typically modified
  only once per bootup, or not at all. )
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When p9pdu_readf() is called with "s" attribute, it allocates a pointer that
will store a string. In p9dirent_read(), this pointer is not being released,
leading to out of memory errors.
This patch releases this pointer after string is copyed to dirent->d_name.
Signed-off-by: Pedro Scarapicchia Junior <pedro.scarapiccha@br.flextronics.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

Changeset dcd39c90 ("ne-h8300: convert to
net_device_ops") broke ne-h8300 by adding 8390.o to the link. That
meant that lib8390.c was included twice, once in ne-h8300.c and once in
8390.c, subject to different macros. This patch reverts that by
avoiding the wrappers in 8390.c.

Fix based on commits 217cbfa8 ("mac8390:
fix regression caused during net_device_ops conversion") and
4e0168fa ("mac8390: fix build with
NET_POLL_CONTROLLER").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Changeset 5618f0d1 ("hydra: convert to
net_device_ops") broke hydra by adding 8390.o to the link. That
meant that lib8390.c was included twice, once in hydra.c and once in
8390.c, subject to different macros. This patch reverts that by
avoiding the wrappers in 8390.c.

Fix based on commits 217cbfa8 ("mac8390:
fix regression caused during net_device_ops conversion") and
4e0168fa ("mac8390: fix build with
NET_POLL_CONTROLLER").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

Changeset b6114794 ("zorro8390: convert to
net_device_ops") broke zorro8390 by adding 8390.o to the link. That
meant that lib8390.c was included twice, once in zorro8390.c and once in
8390.c, subject to different macros. This patch reverts that by
avoiding the wrappers in 8390.c.

Fix based on commits 217cbfa8 ("mac8390:
fix regression caused during net_device_ops conversion") and
4e0168fa ("mac8390: fix build with
NET_POLL_CONTROLLER").
Reported-by: Christian T. Steigies <cts@debian.org>
Suggested-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Christian T. Steigies <cts@debian.org>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

The filename_trans rule processing has some printk(KERN_ERR ) messages
which were intended as debug aids in creating the code but weren't removed
before it was submitted.  Remove them.
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Eric Paris <eparis@redhat.com>

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: WM8903: Fix Digital Capture Volume range
  ASoC: UDA134x: Remove POWER_OFF_ON_STANDBY define.
  ASoC: SSM2602: Fix reg_cache_size
  ASoC: SSM2602: Fix 'Mic Boost2' control
  ASoC: SSM2602: Properly annotate i2c probe and remove functions
  ASoC: sst_platform: add hw_free callback to fix resource leak
  ASoC: Don't crash on PM operations
  ASoC: JZ4740: Fix i2s shutdown

* 'stable/bug-fixes-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  x86/mm: Fix section mismatch derived from native_pagetable_reserve()
  x86,xen: introduce x86_init.mapping.pagetable_reserve
  Revert "xen/mmu: Add workaround "x86-64, mm: Put early page table high""

This reverts commit 49183b28.

Quoth Franz Melchior:

  "This patch introduces a bug on my infamous "Acer Travelmate
   5735Z-452G32Mnss": when KMS takes over, the frame buffer contents get
   completely garbled up on screen, with colored stripes and unreadable
   text (photo on request).  Only when X11 is started, the screen gets
   restored again.  Closing and re-opening the lid partly cures the
   mess, too: it makes the font readable, though horizontally stretched."
Acked-by: Keith Packard <keithp@keithp.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* fbmem:
  fbmem: make read/write/ioctl use the frame buffer at open time
  fbcon: add lifetime refcount to opened frame buffers

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ads7846 - remove unused variable from struct ads7845_ser_req
  Input: ads7846 - make transfer buffers DMA safe

With CONFIG_DEBUG_SECTION_MISMATCH=y I see these warnings in next-20110415:

  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0x1ba48): Section mismatch in reference from the function native_pagetable_reserve() to the function .init.text:memblock_x86_reserve_range()
The function native_pagetable_reserve() references
the function __init memblock_x86_reserve_range().
This is often because native_pagetable_reserve lacks a __init
annotation or the annotation of memblock_x86_reserve_range is wrong.

This patch fixes the issue.
Thanks to pipacs from PaX project for help on IRC.
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Introduce a new x86_init hook called pagetable_reserve that at the end
of init_memory_mapping is used to reserve a range of memory addresses for
the kernel pagetable pages we used and free the other ones.

On native it just calls memblock_x86_reserve_range while on xen it also
takes care of setting the spare memory previously allocated
for kernel pagetable pages from RO to RW, so that it can be used for
other purposes.

A detailed explanation of the reason why this hook is needed follows.

As a consequence of the commit:

commit 4b239f45
Author: Yinghai Lu <yinghai@kernel.org>
Date:   Fri Dec 17 16:58:28 2010 -0800

    x86-64, mm: Put early page table high

at some point init_memory_mapping is going to reach the pagetable pages
area and map those pages too (mapping them as normal memory that falls
in the range of addresses passed to init_memory_mapping as argument).
Some of those pages are already pagetable pages (they are in the range
pgt_buf_start-pgt_buf_end) therefore they are going to be mapped RO and
everything is fine.
Some of these pages are not pagetable pages yet (they fall in the range
pgt_buf_end-pgt_buf_top; for example the page at pgt_buf_end) so they
are going to be mapped RW.  When these pages become pagetable pages and
are hooked into the pagetable, xen will find that the guest has already
a RW mapping of them somewhere and fail the operation.
The reason Xen requires pagetables to be RO is that the hypervisor needs
to verify that the pagetables are valid before using them. The validation
operations are called "pinning" (more details in arch/x86/xen/mmu.c).

In order to fix the issue we mark all the pages in the entire range
pgt_buf_start-pgt_buf_top as RO, however when the pagetable allocation
is completed only the range pgt_buf_start-pgt_buf_end is reserved by
init_memory_mapping. Hence the kernel is going to crash as soon as one
of the pages in the range pgt_buf_end-pgt_buf_top is reused (b/c those
ranges are RO).

For this reason we need a hook to reserve the kernel pagetable pages we
used and free the other ones so that they can be reused for other
purposes.
On native it just means calling memblock_x86_reserve_range, on Xen it
also means marking RW the pagetable pages that we allocated before but
that haven't been used before.

Another way to fix this is without using the hook is by adding a 'if
(xen_pv_domain)' in the 'init_memory_mapping' code and calling the Xen
counterpart, but that is just nasty.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

This reverts commit a3864783.

It does not work with certain AMD machines.

last_pfn = 0x100000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 02c3a000
Base memory trampoline at [ffff88000009b000] 9b000 size 20480
init_memory_mapping: 0000000000000000-0000000100000000
 0000000000 - 0100000000 page 4k
kernel direct mapping tables up to 100000000 @ ff7fb000-100000000
init_memory_mapping: 0000000100000000-00000001e0800000
 0100000000 - 01e0800000 page 4k
kernel direct mapping tables up to 1e0800000 @ 1df0f3000-1e0000000
xen: setting RW the range fffdc000 - 100000000
RAMDISK: 0203b000 - 02c3a000
No NUMA configuration found
Faking a node at 0000000000000000-00000001e0800000
NUMA: Using 63 for the hash shift.
Initmem setup node 0 0000000000000000-00000001e0800000
  NODE_DATA [00000001dfffb000 - 00000001dfffffff]
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81cf6a75>] setup_node_bootmem+0x18a/0x1ea
PGD 0
Oops: 0003 [#1] SMP
last sysfs file:
CPU 0
Modules linked in:

Pid: 0, comm: swapper Not tainted 2.6.39-0-virtual #6~smb1
RIP: e030:[<ffffffff81cf6a75>]  [<ffffffff81cf6a75>] setup_node_bootmem+0x18a/0x1ea
RSP: e02b:ffffffff81c01e38  EFLAGS: 00010046
RAX: 0000000000000000 RBX: 00000001e0800000 RCX: 0000000000001040
RDX: 0000000000004100 RSI: 0000000000000000 RDI: ffff8801dfffb000
RBP: ffffffff81c01e58 R08: 0000000000000020 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000bfe400
FS:  0000000000000000(0000) GS:ffffffff81cca000(0000) knlGS:0000000000000000
CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000001c03000 CR4: 0000000000000660
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffffffff81c00000, task ffffffff81c0b020)
Stack:
 0000000000000040 0000000000000001 0000000000000000 ffffffffffffffff
 ffffffff81c01e88 ffffffff81cf6c25 0000000000000000 0000000000000000
 ffffffff81cf687f 0000000000000000 ffffffff81c01ea8 ffffffff81cf6e45
Call Trace:
 [<ffffffff81cf6c25>] numa_register_memblks.constprop.3+0x150/0x181
 [<ffffffff81cf687f>] ? numa_add_memblk+0x7c/0x7c
 [<ffffffff81cf6e45>] numa_init.part.2+0x1c/0x7c
 [<ffffffff81cf687f>] ? numa_add_memblk+0x7c/0x7c
 [<ffffffff81cf6f67>] numa_init+0x6c/0x70
 [<ffffffff81cf7057>] initmem_init+0x39/0x3b
 [<ffffffff81ce5865>] setup_arch+0x64e/0x769
 [<ffffffff815e43c1>] ? printk+0x51/0x53
 [<ffffffff81cdf92b>] start_kernel+0xd4/0x3f3
 [<ffffffff81cdf388>] x86_64_start_reservations+0x132/0x136
 [<ffffffff81ce2ed4>] xen_start_kernel+0x588/0x58f
Code: 41 00 00 48 8b 3c c5 a0 24 cc 81 31 c0 40 f6 c7 01 74 05 aa 66 ba ff 40 40 f6 c7 02 74 05 66 ab 83 ea 02 89 d1 c1 e9 02 f6 c2 02 <f3> ab 74 02 66 ab 80 e2 01 74 01 aa 49 63 c4 48 c1 eb 0c 44 89
RIP  [<ffffffff81cf6a75>] setup_node_bootmem+0x18a/0x1ea
 RSP <ffffffff81c01e38>
CR2: 0000000000000000
---[ end trace a7919e7f17c0a725 ]---
Kernel panic - not syncing: Attempted to kill the idle task!
Pid: 0, comm: swapper Tainted: G      D     2.6.39-0-virtual #6~smb1
Reported-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix oops in revalidate when called with NULL nameidata

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc32: Fixed unaligned memory copying in function __csum_partial_copy_sparc_generic
  sparc32: fix sparcstation 5 boot
  sparc32: fix section mismatch warnings in apc, pmc and time_32

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6870/1: The mandatory barrier rmb() must be a dsb() in for device accesses
  ARM: 6892/1: handle ptrace requests to change PC during interrupted system calls
  ARM: 6890/1: memmap: only free allocated memmap entries when using SPARSEMEM
  ARM: zImage: the page table memory must be considered before relocation
  ARM: zImage: make sure not to relocate on top of the relocation code
  ARM: zImage: Fix bad SP address after relocating kernel
  ARM: zImage: make sure the stack is 64-bit aligned
  ARM: RiscPC: acornfb: fix section mismatches
  ARM: RiscPC: etherh: fix section mismatches

read/write/ioctl on a fbcon file descriptor has traditionally used the
fbcon not when it was opened, but as it was at the time of the call.
That makes no sense, but the lack of sense is much more obvious now that
we properly ref-count the usage - it means that the ref-counting doesn't
actually protect operations we do on the frame buffer.

This changes it to look at the fb_info that we got at open time, but in
order to avoid using a frame buffer long after it has been unregistered,
we do verify that it is still current, and return -ENODEV if not.
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andy Whitcroft <andy.whitcroft@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This just adds the refcount and the new registration lock logic.  It
does not (for example) actually change the read/write/ioctl routines to
actually use the frame buffer that was opened: those function still end
up alway susing whatever the current frame buffer is at the time of the
call.

Without this, if something holds the frame buffer open over a
framebuffer switch, the close() operation after the switch will access a
fb_info that has been free'd by the unregistering of the old frame
buffer.

(The read/write/ioctl operations will normally not cause problems,
because they will - illogically - pick up the new fbcon instead.  But a
switch that happens just as one of those is going on might see problems
too, the window is just much smaller: one individual op rather than the
whole open-close sequence.)

This use-after-free is apparently fairly easily triggered by the Ubuntu
11.04 boot sequence.
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Tested-by: Anca Emanuel <anca.emanuel@gmail.com>
Cc: Bruno Prémont <bonbons@linux-vserver.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Andy Whitcroft <andy.whitcroft@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>