- 02 Aug, 2010 40 commits
-
-
Guennadi Liakhovetski authored
RJ54N1CB0C is a Sharp camera sensor. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Guennadi Liakhovetski authored
SH7724 datasheet specifies 480 pixels as the VOU maximum vertical resolution. This is a bug in the datasheet, VOU also supports the full PAL resolution: 576 lines. Adjust the driver accordingly. Signed-off-by:
-
Guennadi Liakhovetski authored
Using CEU with CSI2 on SH-Mobile requires some special configuration of the former. We also have to switch from calling only one subdev .s_mbus_fmt and .try_mbus_fmt to calling all subdevices. Take care to increment CSI2 driver use count to prevent it from unloading, while in use. Signed-off-by:
-
Guennadi Liakhovetski authored
Some SH-Mobile SoCs implement a MIPI CSI-2 controller, that can interface to several video clients and send data to the CEU or to the Image Signal Processor. This patch implements a v4l2-subdevice driver for CSI-2 to be used within the soc-camera framework, implementing the second subdevice in addition to the actual video clients. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
These formats belong to the standard format set, defined by the MIPI CSI-2 specification. Signed-off-by:
-
Guennadi Liakhovetski authored
Endianness notation is meaningless for 8 bit YUYV codes. Switch pixel code names to explicitly state the order of colour components in the data stream. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Jarod Wilson authored
Make the bits under staging/lirc/ buildable, and add a TODO note. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Jarod Wilson authored
Commonly found on several Hauppauge video capture devices. Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Nb: this is a very trimmed-down lirc_imon, which only supports the oldest generation of imon devices that don't do onboard signal decoding like the most recent generation imon devices -- those are now supported by the ir-core imon driver. Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
[mchehab@redhat.com: fixed a few WARNING: please, no space before tabs] Signed-off-by:
-
Jarod Wilson authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Acked-by:
Luca Olivetti <luca@ventoso.org> Signed-off-by:
-
Jarod Wilson authored
This adds support for the KWorld PlusTV 340U and KWorld UB345-Q ATSC sticks, which are really the same device. The sticks have an eMPIA em2870 usb bridge chipset, an LG Electronics LGDT3304 ATSC/QAM demodulator and an NXP TDA18271HD tuner -- early versions of the 340U have a a TDA18271HD/C1, later models and the UB435-Q have a C2. The stick has been tested succesfully with both VSB_8 and QAM_256 signals. Its using lgdt3304 support added to the lgdt3305 driver by a prior patch, rather than the current lgdt3304 driver, as its severely lacking in functionality by comparison (see said patch for details). Signed-off-by:
-
Jiri Slaby authored
In dvb_dvr_release, there is a test dvbdev->users==-1, but users are never negative. This error results in hung tasks: task PC stack pid father bash D ffffffffa000c948 0 3264 3170 0x00000000 ffff88003aec5ce8 0000000000000086 0000000000011f80 0000000000011f80 ffff88003aec5fd8 ffff88003aec5fd8 ffff88003b848670 0000000000011f80 ffff88003aec5fd8 0000000000011f80 ffff88003e02a030 ffff88003b848670 Call Trace: [<ffffffff813dd4a5>] dvb_dmxdev_release+0xc5/0x130 [<ffffffff8107b750>] ? autoremove_wake_function+0x0/0x40 [<ffffffffa00013a2>] dvb_usb_adapter_dvb_exit+0x42/0x70 [dvb_usb] [<ffffffffa0000525>] dvb_usb_exit+0x55/0xd0 [dvb_usb] [<ffffffffa00005ee>] dvb_usb_device_exit+0x4e/0x70 [dvb_usb] [<ffffffffa000a065>] af9015_usb_device_exit+0x55/0x60 [dvb_usb_af9015] [<ffffffff813a3f05>] usb_unbind_interface+0x55/0x1a0 [<ffffffff81316000>] __device_release_driver+0x70/0xe0 ... So check against 1 there instead. BTW why's the TODO there? Adding TODOs to the code without descriptions is like adding nothing. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
-
Laurent Pinchart authored
The UVC host and gadget drivers both define constants and structures in private header files. Move all those definitions to linux/usb/video.h where they can be shared by the two drivers (and be available for userspace applications). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Antti Palosaari authored
Fix comments. It is demodulator driver not DVB USB -bridge. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Firmware version is four digit long. Print all four digits instead of three digits used earlier. Signed-off-by:
-
Antti Palosaari authored
Function af9013_read_status() refactoring. Read lock bits in different order to save count of register reads. Signed-off-by:
-
Antti Palosaari authored
Program tuner before demodulator in case of channel set. Earlier it was programmed during demodulator programming. This seems to resolve weird error where demodulator misses sometimes ability to gain lock. Signed-off-by:
-
Antti Palosaari authored
Add USB ID 07ca:815a for AverMedia AVerTV Volar M (A815Mac). Signed-off-by:
-
Antti Palosaari authored
New driver contains new firmware 5.1.0.0. Fix script to get that. Signed-off-by:
-
Antti Palosaari authored
Add support for new firmware version 5.1.0.0. Signed-off-by:
-
Jean-François Moine authored
The first VC0321 settings were done at webcam connection only. They must also be done on resume after suspend. Signed-off-by:
Jean-François Moine <moinejf@free.fr> Signed-off-by:
-
Jean-François Moine authored
The bit 0x04 of the bridge register 02 (GPIO) is used for audio connection in webcams containing the bridge SN9C105. This patch sets it correctly, according to the presence of an audio device. Tested-by:
Kyle Baker <kyleabaker@gmail.com> Signed-off-by:
-
Jean-François Moine authored
When there is an audio device, use a lower alternate setting. This patch does not fix correctly all audio and bandwidth problems. Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
Jean-François Moine authored
Signed-off-by:
-
