Merge tag 'omap-for-v3.11/omap5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Omap5 SoC data via Paul Walmsley <paul@pwsan.com:

Add support for the OMAP5 SoC family.

As part of the transition to DT, no board files will be used
for OMAP5.  The hwmod data is gradually being transitioned
away from arch/arm/mach-omap2: IRQ, DMA, and memory map data
has been moved to DT.  Hopefully the dev_attr and clock role
data will be the next step.

Basic test logs are available here, although not for OMAP5,
since I don't have an OMAP5 board:
http://www.pwsan.com/omap/testlogs/omap5_v3.10/20130608130949/

* tag 'omap-for-v3.11/omap5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP5: Remove unused include for ocp2scp
  ARM: OMAP5: Enable build and frameowrk initialisations
  ARM: OMAP5: voltagedomain data: Add OMAP5 voltage domain data
  ARM: OMAP5: hwmod data: Create initial OMAP5 SOC hwmod data
  ARM: OMAP5: powerdomain data: Add OMAP54XX data and update the header
  ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
  ARM: OMAP5: SCRM: Add OMAP54XX header file.
  ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
  ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
  ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
  ARM: OMAP4+: CM: Move function prototypes to common header for re-use
  ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
  ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Omap SoC changes. Mostly improves am33xx support, and adds
minimal support for am43x SoCs.

* tag 'omap-for-v3.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: AM43x: SRAM base and size
  ARM: OMAP2+: AM43x: GP or HS ?
  ARM: OMAP2+: AM43x: early init
  ARM: OMAP2+: AM43x: static mapping
  ARM: OMAP2+: AM437x: SoC revision detection
  ARM: OMAP2+: AM43x: soc_is support
  ARM: OMAP2+: AM43x: kbuild
  ARM: OMAP2+: AM43x: Kconfig
  ARM: OMAP2+: separate out OMAP4 restart
  ARM: AM33XX: clk: Add clock node for EHRPWM TBCLK
  ARM: OMAP3: clock data: get rid of unused USB host clock aliases and dummies
  ARM: OMAP2+: AM33xx: Add missing reset status info to GFX hwmod
  + Linux 3.10-rc5
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v3.11/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

From Tony Lindgren:
Omap PM changes via Kevin Hilman <khilman@linaro.org>:

OMAP PM cleanups for v3.10

* tag 'omap-for-v3.11/pm-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4+: PM: Consolidate OMAP4 PM code to re-use it for OMAP5
  ARM: OMAP4+: Make secondary_startup function name more consistent
  ARM: OMAP4+: PM: Consolidate MPU subsystem PM code for re-use
  ARM: OMAP4: PM: Avoid expensive cpu_suspend() path for all CPU power states except off

Merge tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

From Kukjin Kim, DMA driver updates for s3c24xx.

* tag 's3c24xx-arch-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C24XX: remove obsolete s3c2412 specific dma settings
  ARM: S3C24XX: dma-s3c2443 - do not write into arbitary bits
  ARM: S3C24XX: split s3c2412 spi dma channels
Signed-off-by: Olof Johansson <olof@lixom.net>

This definition corresponds to the L3_OCMC0,
as in case of AM33XX.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Afzal Mohammed <afzal@ti.com>
[tony@atomide.com: updated to remove default y]
Signed-off-by: Tony Lindgren <tony@atomide.com>

Detect whether GP or HS, similar to the AM335x way.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Minimal early init - PRCM initialization not yet taken care.

Control module is similar (base address, feature register etc.) as
that of AM335x, while PRCM base address is different. Instead of
adding a new header file for AM43x, PRCM base address is added in
AM335x header file as it is similar to it to a large extent.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
[tony@atomide.com: updated to drop am33xx_check_features()]
Signed-off-by: Tony Lindgren <tony@atomide.com>

AM43x L4 WKUP/PER mappings are similar to AM335x, reuse.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Detect 437x SoC revision.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

soc_is support for AM43x family of SoC's. Only variant now is AM437x,
it is made as a subclass of AM43x.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Build pieces that could be reused for AM43x - GIC related, secure
related and common PRCM.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Kconfig for AM43x (Cortex A9) family of SoC's.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Separate out OMAP4 restart and have it similar to other platforms, in
a different file. Main motive is to reuse omap4-common on platforms
other than OMAP4, like AM43x, even if OMAP4 is deselected (otherwise
would have caused build breakage).
Signed-off-by: Afzal Mohammed <afzal@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

SOCFPGA has a system manager register block can be accessed by using
the syscon driver.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: <linux@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add support to gate the clocks that directly feed peripherals. For clocks
with multiple parents, add the ability to determine the correct parent,
and also set parents. Also add support to calculate and set the clocks'
rate.
Signed-off-by: Dinh Nguyen <dinguyen@altera.com>
Reviewed-by: Pavel Machek <pavel@denx.de>
Acked-by: Mike Turquette <mturquette@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Olof Johansson <olof@lixom.net>
Cc: Pavel Machek <pavel@denx.de>
CC: <linux@arm.linux.org.uk>

v4:
- Add Acked-by: Mike Turquette

v3:
- Addressed comments from Pavel

v2:
- Fix space/indent errors
- Add streq for strcmp == 0
Signed-off-by: Olof Johansson <olof@lixom.net>

From Alexander Shiyan, this is a series of cleanups of clps711x, movig it
closer to multiplatform and cleans up a bunch of old code.

* clps711x/soc:
  ARM: clps711x: Update defconfig
  ARM: clps711x: Add support for SYSCON driver
  ARM: clps711x: edb7211: Control LCD backlight via PWM
  ARM: clps711x: edb7211: Add support for I2C
  ARM: clps711x: Optimize interrupt handling
  ARM: clps711x: Add clocksource framework
  ARM: clps711x: Replace "arch_initcall" in common code with ".init_early"
  ARM: clps711x: Move specific definitions from hardware.h to boards files
  ARM: clps711x: p720t: Define PLD registers as GPIOs
  ARM: clps711x: autcpu12: Move remaining specific definitions to board file
  ARM: clps711x: autcpu12: Special driver for handling memory is removed
  ARM: clps711x: autcpu12: Add support for NOR flash
  ARM: clps711x: autcpu12: Move LCD DPOT definitions to board file
  ARM: clps711x: Set PLL clock to zero if we work from 13 mHz source
  ARM: clps711x: Remove NEED_MACH_MEMORY_H dependency
  ARM: clps711x: Re-add GPIO support
  GPIO: clps711x: Add DT support
  GPIO: clps711x: Rewrite driver for using generic GPIO code
  + Linux 3.10-rc4
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds support for SYSCON driver for CLPS711X targets.
At this time there are no users for this driver, but it is will
be used as start point to use in CLPS711X drivers and remove
<mach/xx> dependencies.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch provide control LCD backlight via PWM. GPIO is used
only for switch backlight ON and OFF.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch modify interrupt handler for processing all penging interrupts
at once.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch provide migration to using "mtd-ram" driver instead of using
special driver for handling NVRAM memory.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

We do not have driver for Up/Down digital potentiometer (DPOT), so
just define pins as GPIOs and export these pins to user.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This clock will be used in audio subsystem. Since audio cannot work
without PLL we should indicate this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch removes dependency of NEED_MACH_MEMORY_H for CLPS711X-target.
Since some board may have memory holes, define ARCH_HAS_HOLES_MEMORYMODEL
for these boards.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>

arch_initcall was been removed from GPIO driver, so this patch
re-add support for GPIO into boards as platform_device.
Since some drivers (spi, nand, etc.) is not support deferred probe,
separate machine init calls is used in board code to make proper
loading sequence.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Add DT support to the CLPS711X GPIO driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch provides rewritten driver for CLPS711X GPIO which uses
generic GPIO code.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-soc-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas ARM-based SoC updates for v3.11

* Increased clock coverage for r8a7740, r8a73a4, r8a7778 and r8a7790
* Use fixed clock ratio for r8a7778
* Always use shmobile_setup_delay for sh73a0
* Add add CPUFreq support for sh73a0
* Check kick bit before changing rate on sh73a0
* Do not overwrite all div4 clock operations on sh73a0

* Cleanup SH_FIXED_RATIO_CLK and SH_FIXED_RATIO_CLK macros
* sh73a0: Use DEFINE_RES_MEM*() everywhere
* r8a7740: Make private clock arrays static
* r8a7778: Correct model number

The last four changes listed above are cleanups. I have included them
in this series as all bar the last one are dependencies of non-cleanup
patches.

* tag 'renesas-soc-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (27 commits)
  ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rate
  ARM: shmobile: sh73a0: do not overwrite all div4 clock operations
  ARM: shmobile: sh73a0: Always use shmobile_setup_delay()
  ARM: shmobile: sh73a0: add CPUFreq support
  ARM: shmobile: sh73a0: add support for adjusting CPU frequency
  ARM: shmobile: r8a7790: add TPU PWM support
  ARM: shmobile: r8a7790: Make private clock arrays static
  ARM: shmobile: r8a7790: add div6 clocks
  ARM: shmobile: r8a7790: add div4 clocks
  ARM: shmobile: r8a7790: add main clock
  ARM: shmobile: r8a7778: Register SDHI device
  ARM: shmobile: r8a7778: add SDHI clock support
  ARM: shmobile: r8a7778: use fixed ratio clock
  ARM: shmobile: r8a7779: Add PCIe clocks
  ARM: shmobile: r8a73a4: add div6 clocks
  ARM: shmobile: r8a73a4: add div4 clocks
  ARM: shmobile: r8a73a4: add pll clocks
  ARM: shmobile: r8a73a4: add main clock
  ARM: shmobile: r8a7740: add TPU PWM support
  ARM: shmobile: r8a7740: Add I2C DT clock names
  ...

Conflicts:
	arch/arm/mach-shmobile/Kconfig
	arch/arm/mach-shmobile/include/mach/r8a7778.h
	arch/arm/mach-shmobile/setup-r8a7778.c

Merge tag 'renesas-pinmux-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas ARM based SoC pinmux and GPIO update for v3.11

SH-PFC:
* Entries for INTC external IRQs
* Remove dependency on GPIOLIB
* PFC support for r8a7790 SoC
* Pinmux support for r8a7778 SoC
* Increase pin group and function coverage for sh7372, r8a7740,
  r8a7778, r8a7779 and r8a7790 SoCs
* Use pinctrl mapping on mackerel, ap4evb, armadillo800eva,
  bonito, bockw, lager boards
* Use RCAR_GP_PIN macro in marzen board
* Remove unused GPIOs for sh7372, sh73a0, r8a7740 and r8a7790 SoCs
* Add bias (pull-up/down) pinconf support for r8a7740 SoC
* Add VCCQ support for sh73a0

GPIO car:
* Add RCAR_GP_PIN macro
* Add support for IRQ_TYPE_EDGE_BOTH
* Make the platform data gpio_base field signed

The GPIO changes have been included as the RCAR_GP_PIN and
IRQ_TYPE_EDGE_BOTH changes are depended on by SH-PFC changes.

* tag 'renesas-pinmux-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (132 commits)
  ARM: shmobile: marzen: Use RCAR_GP_PIN macro
  ARM: shmobile: lager: Initialize pinmux
  ARM: shmobile: bockw: add pinctrl support
  ARM: shmobile: kzm9g: tidyup FSI pinctrl
  ARM: shmobile: r8a7740 pinmux platform device cleanup
  ARM: shmobile: r8a7790: Configure R-Car GPIO for IRQ_TYPE_EDGE_BOTH
  pinctrl: sh-pfc: r8a7779: Fix missing MOD_SEL2 entry
  Revert "ARM: shmobile: Disallow PINCTRL without GPIOLIB"
  pinctrl: r8a7790: add pinmux data for MMCIF and SDHI interfaces
  sh-pfc: r8a7778: add MMCIF pin groups
  sh-pfc: r8a7778: add HSPI pin groups
  sh-pfc: r8a7778: add I2C pin groups
  pinctrl: sh-pfc: fix a typo in pfc-r8a7790
  pinctrl: sh-pfc: fix r8a7790 Function Select register tables
  sh-pfc: r8a7778: fixup IRQ1A settings
  sh-pfc: r8a7779: add Ether pin groups
  sh-pfc: r8a7778: add Ether pin groups
  sh-pfc: r8a7778: add VIN pin groups
  sh-pfc: sh73a0: Remove function GPIOs
  sh-pfc: r8a7790: Add TPU pin groups and functions
  ...

From Jason Cooper:
mvebu pcie driver (kirkwood) for v3.11 (round 2)
 - kirkwood
    - migrate Netgear ReadyNAS Duo v2 to pcie DT init

* tag 'pcie_kw-3.11-2' of git://git.infradead.org/users/jcooper/linux:
  arm: kirkwood: NETGEAR ReadyNAS Duo v2 init PCIe via DT
Signed-off-by: Olof Johansson <olof@lixom.net>

This header is not used, and is removed with the omap4 clean-up.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'omap-devel-a-for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.11/omap5

Add support for the OMAP5 SoC family.

As part of the transition to DT, no board files will be used
for OMAP5.  The hwmod data is gradually being transitioned
away from arch/arm/mach-omap2: IRQ, DMA, and memory map data
has been moved to DT.  Hopefully the dev_attr and clock role
data will be the next step.

Basic test logs are available here, although not for OMAP5,
since I don't have an OMAP5 board:
http://www.pwsan.com/omap/testlogs/omap5_v3.10/20130608130949/

Merge tag 'omap-devel-b-for-3.11' of http://git.kernel.org/cgit/linux/kernel/git/pjw/omap-pending into omap-for-v3.11/soc

A few OMAP clock & hwmod changes for v3.11.

Basic test logs are here:

http://www.pwsan.com/omap/testlogs/prcm_devel_v3.11/20130609020805/