- 31 Dec, 2011 5 commits
-
-
Mauro Carvalho Chehab authored
This driver implements a fake get_bandwidth() callback. In reallity, the tuner driver won't adjust its low-pass filter based on a bandwidth, and were just providing a fake method for demods to read whatever was "set". This code is useless, as none of the drivers that use this tuner seems to require a get_bandwidth() callback. While here, convert set_params to use the DVBv5 way to pass parameters to tuners. Signed-off-by:Mauro Carvalho Chehab <mchehab@redhat.com>
-
Mauro Carvalho Chehab authored
This driver implements a fake get_bandwidth() callback. In reallity, the tuner driver won't adjust its low-pass filter based on a bandwidth, and were just providing a fake method for demods to read whatever was "set". This code is useless, as none of the drivers that use this tuner seems to require a get_bandwidth() callback. While here, convert set_params to use the DVBv5 way to pass parameters to tuners. Signed-off-by: -
Mauro Carvalho Chehab authored
This driver implements a fake get_bandwidth() callback. In reallity, the tuner driver won't adjust its low-pass filter based on a bandwidth, and were just providing a fake method for demods to read whatever was "set". This code is useless, as none of the drivers that use this tuner seems to require a get_bandwidth() callback. While here, convert set_params to use the DVBv5 way to pass parameters to tuners. Signed-off-by: -
Mauro Carvalho Chehab authored
Instead of just estimating the bandwidth for DVB-C annex A/C, also fill it at the core for ATSC and DVB-C annex B. This simplifies the logic inside the tuners, as all non-satellite tuners can just use c->bandwidth_hz for all supported delivery systems. It could make sense to latter use it also for satellite systems, as several DVB-S drivers have their own calculus. However, on DVB-S2 the bw estimation is a little more complex, and the existing drivers have some optimized calculus for bandwidth. So, let's not touch on it for now. Signed-off-by: -
Mauro Carvalho Chehab authored
SYS_DVBC_ANNEX_AC is an alias for SYS_DVBC_ANNEX_A. However, the first one is incorrect, as not all devices support both. So, replace its occurrences by the proper value (either SYS_DVBC_ANNEX_A or both SYS_DVBC_ANNEX_A and SYS_DVBC_ANNEX_C). Signed-off-by:
-
- 30 Dec, 2011 35 commits
-
-
David Fries authored
dvb_register calls videobuf_dvb_register_bus, but if that returns a failure the module will be unloaded without clearing the value of core->gate_ctrl which will cause an oops in macros called from video_open in cx88-video.c Signed-off-by:
David Fries <David@Fries.net> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Istvan Varga <istvan_v@mailbox.hu> Cc: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by:
-
Dan Carpenter authored
dprintk() dereferences "ir". I'm not sure why gcc doesn't complain about this. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Aivar Päkk authored
This patch adds Kworld 355U and 380U support Signed-off-by:
Aivar Päkk <aivar11@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
Stop dual frontend attach in warm state with single devices. Since this is a no reconnect device this occurs only after a warm system reboot. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
Re: [git:v4l-dvb/for_v3.3] [media] it9135: add support for IT9135 9005 devices On Sun, 2011-12-11 at 11:55 +0100, Mauro Carvalho Chehab wrote: > This is an automatic generated email to let you know that the following patch were queued at the > http://git.linuxtv.org/media_tree.git tree: > > Subject: [media] it9135: add support for IT9135 9005 devices > Author: Malcolm Priestley <tvboxspy@gmail.com> > Date: Wed Nov 30 17:16:09 2011 -0300 > > Support add for IT9135 9005 devices > > With this patch IT9135 devices now move to using > dvb-usb-it9135-01.fw firmware > IT9137 remain on previous firmware. Hi Mauro, I have made a small mistake on this patch. I forgot to increase number of num_device_descs to 4. Signed-off-by:
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Thomas Meyer authored
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107Signed-off-by:
-
Andreas Oberritter authored
There are some issues and miss-behaves at the dvb fe thread: 1) dvb_shutdown_timeout should be dvb_shutdown_timeout * HZ instead of (dvb_shutdown_timeout * HZ + 1); 2) add a memory barrier to warrant that all CPU's will consider the new value for release_jiffies; 3) wake up dvb thread also when fepriv->exit == DVB_FE_NO_EXIT. Signed-off-by:
Andreas Oberritter <obi@linuxtv.org> Signed-off-by:
-
Stas Sergeev authored
The attached patch fixes the automute logic of saa7134. It avoids the white noise on the pulseaudio startup. (pulseaudio reads the saa7134 alsa device on startup) Signed-off-by: -
Xi Wang authored
Message-Id: <1322820073-19347-4-git-send-email-xi.wang@gmail.com> The error handling with (ret < 0) didn't work where ret is a u32. Use int instead. To be consistent we also change the functions to return an int. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Xi Wang authored
Message-Id: <1322820073-19347-3-git-send-email-xi.wang@gmail.com> The error handling with (ret < 0) didn't work where ret is a u32. Use int instead. To be consistent we also change the functions to return an int. Signed-off-by:
-
Xi Wang authored
Message-Id: <1322820073-19347-2-git-send-email-xi.wang@gmail.com> The error handling with (ret < 0) didn't work where ret is a u32. Use int instead. To be consistent we also change the functions to return an int. Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
-
Hans de Goede authored
The new iso bandwidth calculation code accidentally has broken support for bulk mode cameras. This has broken the following drivers: finepix, jeilinj, ovfx2, ov534, ov534_9, se401, sq905, sq905c, sq930x, stv0680, vicam. Thix patch fixes this. Fix tested with: se401, sq905, sq905c, stv0680 & vicam cams. Signed-off-by:
-
Mauro Carvalho Chehab authored
It seems that a cut-and-past error were added by the last patch: drivers/media/video/videobuf2-core.c: In function ‘vb2_qbuf’: drivers/media/video/videobuf2-core.c:1099:14: warning: comparison between ‘enum v4l2_buf_type’ and ‘enum v4l2_memory’ [-Wenum-compare] On all places V4L2_MEMORY_USERPTR is used, it is associated with q->memory, and not b->type. So, the fix seems obvious. Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Pawel Osciak <pawel@osciak.com> Signed-off-by: -
Andrzej Pietrasiewicz authored
This patch adds support for user pointer memory buffers to vmalloc videobuf2 allocator. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
Marek Szyprowski authored
This patch is a result of review of mem_priv entry usage in videobuf2 core. It fixes all all potential places where it was not checked against NULL or zeroed after freeing as well as a few style issues. Signed-off-by:
-
Marek Szyprowski authored
This patch removes unused 'plane' argument from call_memop macro. Signed-off-by:
-
Marek Szyprowski authored
To get direct access to userspace memory pages vb2 allocator needs to gather read access on mmap semaphore in the current process. The same semaphore is taken before calling mmap operation, while both mmap and qbuf are called by the driver or v4l2 core with driver's lock held. To avoid a AB-BA deadlock (mmap_sem then driver's lock in mmap and driver's lock then mmap_sem in qbuf) the videobuf2 core release driver's lock, takes mmap_sem and then takes again driver's lock. get_userptr methods are now called with all needed locks already taken to avoid further lock magic inside memory allocator's code. Reported-by:
-
Marek Szyprowski authored
Heuristic that checks if the memory pointer has been changed lacked a check if the pointer was actually provided by the userspace, what allowed one to queue a NULL pointer which was accepted without further checking. This patch fixes this issue. Reported-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Michael Krufky authored
fix the following build warning: lgdt330x.c: In function "lgdt330x_set_parameters": lgdt330x.c:346:6: warning: variable "err" set but not used [-Wunused-but-set-variable] Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
initialize *ucblocks to zero & fix the following build warning: lgdt330x.c: In function "lgdt330x_read_ucblocks": lgdt330x.c:288:6: warning: variable "err" set but not used [-Wunused-but-set-variable] Signed-off-by:
-
Manu Abraham authored
PCTV290E: Attach a single frontend, rather than a frontend each per delivery system, whereby a multistandard frontend can advertise all associated delivery systems. Signed-off-by:
Manu Abraham <abraham.manu@gmail.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Manu Abraham authored
Override default delivery system information provided by FE_GET_INFO, so that applications can enumerate delivery systems provided by the frontend. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Hartmut <e9hack@googlemail.com>: > A break is missing before the default statement. Delivery systems for DVB-C result always > in an error. Reported-by:
Hartmut <e9hack@googlemail.com> Signed-off-by:
-
Antti Palosaari authored
Rewrite whole af9013 demod driver in order to decrease I2C I/O. We need to decrease I2C load since AF9015 (I2C adapter / USB-bridge used) seems to have some problems under heavy I2C traffic. Signed-off-by:
-
Antti Palosaari authored
AF9015 firmware does not like if it gets interrupted by I2C adapter request on some critical phases. During normal operation I2C adapter is used only 2nd demodulator and tuner on dual tuner devices. Override demodulator callbacks and use mutex for limit access to those "critical" paths to keep AF9015 happy. Signed-off-by:
-
Sylwester Nawrocki authored
Set v4l2_subdev flags for a host driver to create a sub-device node for the driver so the subdev can be directly configured by applications. Add the subdev open() handler. Signed-off-by:
-
Sylwester Nawrocki authored
Set V4L2_SUBDEV_FL_HAS_DEVNODE flag for the host driver to create the sensor device node. Acked-by:
HeungJun Kim <riverful.kim@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Enabling automatic exposure yields better image quality. With this setting the anti-flicker algorithm is also enabled in automatic frequency detection mode which effectively eliminates distortion from fluctuations of light intensity at power line frequency. Acked-by:
-
Sylwester Nawrocki authored
Initialize default pixel format in driver probe() rather than in s_power handler. This also prevents resetting the configuration applied before the device was powered on. Acked-by:
-
