- 05 Oct, 2013 31 commits
-
-
Alan Stern authored
commit bef073b0 upstream. Commit 24f53137 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. This patch implements the same policy in uhci-hcd. It should be applied to all kernels containing commit c44b2250 (UHCI: implement new semantics for URB_ISO_ASAP). Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit a8693424 upstream. Commit 24f53137 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. This patch implements the same policy in ohci-hcd. The change is more complicated than it was in ehci-hcd, because ohci-hcd doesn't scan for isochronous completions in the same way as ehci-hcd does. Rather, it depends on the hardware adding completed TDs to a "done queue". Some OHCI controller don't handle this properly when a TD's time slot has already expired, so we have to avoid adding such TDs to the schedule in the first place. As a result, if the URB was submitted too late then none of its TDs will get put on the schedule, so none of them will end up on the done queue, so the driver will never realize that the URB should be completed. To solve this problem, the patch adds one to urb_priv->td_cnt for such URBs, making it larger than urb_priv->length (td_cnt already gets set to the number of TD's that had to be skipped because their slots have expired). Each time an URB is given back, the finish_urb() routine looks to see if urb_priv->td_cnt for the next URB on the same endpoint is marked in this way. If so, it gives back the next URB right away. This should be applied to all kernels containing commit 815fa7b9 (USB: OHCI: fix logic for scheduling isochronous URBs). Signed-off-by:
-
Florian Wolter authored
commit 526867c3 upstream. The halted state of a endpoint cannot be cleared over CLEAR_HALT from a user process, because the stopped_td variable was overwritten in the handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will refuse the reset and communication with device can not run over this endpoint. https://bugzilla.kernel.org/show_bug.cgi?id=60699Signed-off-by:
Florian Wolter <wolly84@web.de> Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by:
-
Alan Stern authored
commit f875fdbf upstream. Since uhci-hcd, ehci-hcd, and xhci-hcd support runtime PM, the .pm field in their pci_driver structures should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. The corresponding change has already been made for ohci-hcd. Without this change, controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by:
-
Mathias Nyman authored
commit 284d2055 upstream. When a command times out, the command ring is first aborted, and then stopped. If the command ring is empty when it is stopped the stop event will point to next command which is not yet set. xHCI tries to handle this next event often causing an oops. Don't handle command completion events on stopped cmd ring if ring is empty. This patch should be backported to kernels as old as 3.7, that contain the commit b92cc66c "xHCI: add aborting command ring function" Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Reported-by:
Giovanni <giovanni.nervi@yahoo.com> Signed-off-by:
-
Mathias Nyman authored
commit ec7e43e2 upstream. If a command on the command ring needs to be cancelled before it is handled it can be turned to a no-op operation when the ring is stopped. We want to store the command ring enqueue pointer in the command structure when the command in enqueued for the cancellation case. Some commands used to store the command ring dequeue pointers instead of enqueue (these often worked because enqueue happends to equal dequeue quite often) Other commands correctly used the enqueue pointer but did not check if it pointed to a valid trb or a link trb, this caused for example stop endpoint command to timeout in xhci_stop_device() in about 2% of suspend/resume cases. This should also solve some weird behavior happening in command cancellation cases. This patch is based on a patch submitted by Sarah Sharp to linux-usb, but then forgotten: http://marc.info/?l=linux-usb&m=136269803207465&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit b92cc66c "xHCI: add aborting command ring function" Signed-off-by:
-
Daniel Vetter authored
commit 1062b815 upstream. The native TV encoder has it's own flags to adjust sync modes and enabled interlaced modes which are totally irrelevant for the adjusted mode. This worked out nicely since the input modes used by both the load detect code and reported in the ->get_modes callbacks all have no flags set, and we also don't fill out any of them in the ->get_config callback. This changed with the additional sanitation done with commit 2960bc9c Author: Imre Deak <imre.deak@intel.com> Date: Tue Jul 30 13:36:32 2013 +0300 drm/i915: make user mode sync polarity setting explicit sinc now the "no flags at all" state wouldn't fit through core code any more. So fix this up again by explicitly clearing the flags in the ->compute_config callback. Aside: We have zero checking in place to make sure that the requested mode is indeed the right input mode we want for the selected TV mode. So we'll happily fall over if userspace tries to pull us. But that's definitely work for a different patch series. So just add a FIXME comment for now. Reported-by:
Knut Petersen <Knut_Petersen@t-online.de> Cc: Knut Petersen <Knut_Petersen@t-online.de> Cc: Imre Deak <imre.deak@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Tested-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Malcolm Priestley authored
commit 5e8c3d3e upstream. Don't allow entry to iwctl_siwencodeext if device not open. This fixes a race condition where wpa supplicant/network manager enters the function when the device is already closed. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit e3eb270f upstream. The vt6656 is prone to resetting on the usb bus. It seems there is a race condition and wpa supplicant is trying to open the device via iw_handlers before its actually closed at a stage that the buffers are being removed. The device is longer considered open when the buffers are being removed. So move ~DEVICE_FLAGS_OPENED flag to before freeing the device buffers. Signed-off-by:
-
Ard Biesheuvel authored
commit 40190c85 upstream. Patch 638591cd enabled building the AES assembler code in Thumb2 mode. However, this code used arithmetic involving PC rather than adr{l} instructions to generate PC-relative references to the lookup tables, and this needs to take into account the different PC offset when running in Thumb mode. Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Johan Hovold authored
commit 19b85cfb upstream. Fix tty_kref leak when tty_buffer_request room fails in dma-rx path. Note that the tty ref isn't really needed anymore, but as the leak has always been there, fixing it before removing should makes it easier to backport the fix. Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit fc0919c6 upstream. Fix tty-kref leak introduced by commit 384e301e ("pch_uart: fix a deadlock when pch_uart as console") which never put its tty reference. Signed-off-by:
-
Johan Hovold authored
commit cfd29aa0 upstream. Fix potential tty-kref leak in stop_rx path. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Peter Hurley authored
commit 5cec7bf6 upstream. Commit 'e7f3880c' tty: Fix recursive deadlock in tty_perform_flush() introduced a regression where tcflush() does not generate SIGTTOU for background process groups. Make sure ioctl(TCFLSH) calls tty_check_change() when invoked from the line discipline. Reported-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
-
Alexander Usyskin authored
commit 4a704575 upstream. Unset init_clients_timer and amthif_stall_timers in mei_reset in order to cancel timer ticking and hence avoid recursive reset calls. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
commit e2b31644 upstream. Bus layer omitted check for client state transition while waiting for read completion The client state transition may occur for example as result of firmware initiated reset Add mei_cl_is_transitioning wrapper to reduce the code repetition.: Signed-off-by:
-
Tomas Winkler authored
commit 1aee351a upstream. 1. u8 counters are prone to hard to detect overflow: make them unsigned long to match bit_ functions argument type 2. don't check me_clients_num for negativity, it is unsigned. 3. init all the me client counters from one place Signed-off-by:
-
Josh Boyer authored
commit 70087011 upstream. Add patch to fix 32bit EFI service mapping (rhbz 726701) Multiple people are reporting hitting the following WARNING on i386, WARNING: at arch/x86/mm/ioremap.c:102 __ioremap_caller+0x3d3/0x440() Modules linked in: Pid: 0, comm: swapper Not tainted 3.9.0-rc7+ #95 Call Trace: [<c102b6af>] warn_slowpath_common+0x5f/0x80 [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440 [<c1023fb3>] ? __ioremap_caller+0x3d3/0x440 [<c102b6ed>] warn_slowpath_null+0x1d/0x20 [<c1023fb3>] __ioremap_caller+0x3d3/0x440 [<c106007b>] ? get_usage_chars+0xfb/0x110 [<c102d937>] ? vprintk_emit+0x147/0x480 [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de [<c102406a>] ioremap_cache+0x1a/0x20 [<c1418593>] ? efi_enter_virtual_mode+0x1e4/0x3de [<c1418593>] efi_enter_virtual_mode+0x1e4/0x3de [<c1407984>] start_kernel+0x286/0x2f4 [<c1407535>] ? repair_env_string+0x51/0x51 [<c1407362>] i386_start_kernel+0x12c/0x12f Due to the workaround described in commit 916f676f ("x86, efi: Retain boot service code until after switching to virtual mode") EFI Boot Service regions are mapped for a period during boot. Unfortunately, with the limited size of the i386 direct kernel map it's possible that some of the Boot Service regions will not be directly accessible, which causes them to be ioremap()'d, triggering the above warning as the regions are marked as E820_RAM in the e820 memmap. There are currently only two situations where we need to map EFI Boot Service regions, 1. To workaround the firmware bug described in 916f676f 2. To access the ACPI BGRT image but since we haven't seen an i386 implementation that requires either, this simple fix should suffice for now. [ Added to changelog - Matt ] Reported-by:
Bryan O'Donoghue <bryan.odonoghue.lkml@nexus-software.ie> Acked-by:
Tom Zanussi <tom.zanussi@intel.com> Acked-by:
Darren Hart <dvhart@linux.intel.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Vinson Lee authored
commit ce7eebe5 upstream. The compilation only looks for linux/magic.h from the default include paths, which does not include the source tree. This results in a build error if linux/magic.h is not available or not installed. For example, this build error occurs on CentOS 5. $ make -C tools/lib/lk V=1 [...] gcc -o debugfs.o -c -ggdb3 -Wall -Wextra -std=gnu99 -Werror -O6 -D_FORTIFY_SOURCE=2 -Wbad-function-cast -Wdeclaration-after-statement -Wformat-security -Wformat-y2k -Winit-self -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wno-system-headers -Wold-style-definition -Wpacked -Wredundant-decls -Wshadow -Wstrict-aliasing=3 -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef -Wwrite-strings -Wformat -fPIC -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 debugfs.c debugfs.c:8:25: error: linux/magic.h: No such file or directory The only symbol from linux/magic.h needed by debugfs.c is DEBUGFS_MAGIC, and that is already defined in debugfs.h. linux/magic.h isn't providing any extra symbols and can unincluded. This is similar to the approach by perf, which has its own magic.h wrapper at tools/perf/util/include/linux/magic.h Signed-off-by:
Vinson Lee <vlee@twitter.com> Acked-by:
Borislav Petkov <bp@suse.de> Cc: Borislav Petkov <bp@suse.de> Cc: Vinson Lee <vlee@freedesktop.org> Link: http://lkml.kernel.org/r/1379546200-17028-1-git-send-email-vlee@freedesktop.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Masoud Sharbiani authored
commit 4f0acd31 upstream. Dell PowerEdge C6100 machines fail to completely reboot about 20% of the time. Signed-off-by:
Masoud Sharbiani <msharbiani@twitter.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kent Overstreet authored
commit c0f04d88 upstream. In writeback mode, when we get a cache flush we need to make sure we issue a flush to the backing device. The code for sending down an extra flush was wrong - by cloning the bio we were probably getting flags that didn't make sense for a bare flush, and also the old code was firing for FUA bios, for which we don't need to send a flush to the backing device. This was causing data corruption somehow - the mechanism was never determined, but this patch fixes it for the users that were seeing it. Signed-off-by:
Kent Overstreet <kmo@daterainc.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Kent Overstreet authored
commit 84786438 upstream. btree_sort_fixup() was overly clever, because it was trying to avoid pulling a key off the btree iterator in more than one place. This led to a really obscure bug where we'd break early from the loop in btree_sort_fixup() if the current key overlapped with keys in more than one older set, and the next key it overlapped with was zero size. Signed-off-by:
-
Kent Overstreet authored
commit a698e08c upstream. GFP_NOIO means we could be getting called recursively - mca_alloc() -> mca_data_alloc() - definitely can't use mutex_lock(bucket_lock) then. Whoops. Signed-off-by:
-
Kent Overstreet authored
commit 79e3dab9 upstream. schedule_timeout() != schedule_timeout_uninterruptible() Signed-off-by:
-
Kent Overstreet authored
commit 1394d676 upstream. bch_journal_meta() was missing the flush to make the journal write actually go down (instead of waiting up to journal_delay_ms)... Whoops Signed-off-by:
-
Kent Overstreet authored
commit c2a4f318 upstream. Background writeback works by scanning the btree for dirty data and adding those keys into a fixed size buffer, then for each dirty key in the keybuf writing it to the backing device. When read_dirty() finishes and it's time to scan for more dirty data, we need to wait for the outstanding writeback IO to finish - they still take up slots in the keybuf (so that foreground writes can check for them to avoid races) - without that wait, we'll continually rescan when we'll be able to add at most a key or two to the keybuf, and that takes locks that starves foreground IO. Doh. Signed-off-by:
-
Kent Overstreet authored
commit c426c4fd upstream. The journal replay code didn't handle this case, causing it to go into an infinite loop... Signed-off-by:
-
Gabriel de Perthuis authored
commit aee6f1cf upstream. sysfs attributes with unusual characters have crappy failure modes in Squeeze (udev 164); later versions of udev are unaffected. This should make these characters more unusual. Signed-off-by:
Gabriel de Perthuis <g2p.code@gmail.com> Signed-off-by:
-
Kent Overstreet authored
commit 6d9d21e3 upstream. That switch statement was obviously wrong, leading to some sort of weird spinning on rare occasion with discards enabled... Signed-off-by:
-
Lubomir Rintel authored
commit 49475555 upstream. Superblock lock was replaced with (un)lock_super() removal, but left uninitialized for Seventh Edition UNIX filesystem in the following commit (3.7): c07cb01c sysv: drop lock/unlock super Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Kent Overstreet authored
commit 2f6cf0de upstream. The memcpy() in bio_copy_data() was using the wrong offset vars, leading to data corruption in weird unusual setups. Signed-off-by:
-
- 01 Oct, 2013 9 commits
-
-
Greg Kroah-Hartman authored
-
Oliver Smith authored
commit 2cf55125 upstream. This fixes a serious bug affecting all hash types with a net element - specifically, if a CIDR value is deleted such that none of the same size exist any more, all larger (less-specific) values will then fail to match. Adding back any prefix with a CIDR equal to or more specific than the one deleted will fix it. Steps to reproduce: ipset -N test hash:net ipset -A test 1.1.0.0/16 ipset -A test 2.2.2.0/24 ipset -T test 1.1.1.1 #1.1.1.1 IS in set ipset -D test 2.2.2.0/24 ipset -T test 1.1.1.1 #1.1.1.1 IS NOT in set This is due to the fact that the nets counter was unconditionally decremented prior to the iteration that shifts up the entries. Now, we first check if there is a proceeding entry and if not, decrement it and return. Otherwise, we proceed to iterate and then zero the last element, which, in most cases, will already be zero. Signed-off-by:
Oliver Smith <oliver@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa> Signed-off-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
J. Bruce Fields authored
commit d4a51656 upstream. In theory the linux cred in a gssproxy reply can include up to NGROUPS_MAX data, 256K of data. In the common case we expect it to be shorter. So do as the nfsv3 ACL code does and let the xdr code allocate the pages as they come in, instead of allocating a lot of pages that won't typically be used. Tested-by:
Simo Sorce <simo@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit 9dfd87da upstream. The reply to a gssproxy can include up to NGROUPS_MAX gid's, which will take up more than a page. We therefore need to allocate an array of pages to hold the reply instead of trying to allocate a single huge buffer. Tested-by:
-
J. Bruce Fields authored
commit 6a36978e upstream. The encoding of linux creds is a bit confusing. Also: I think in practice it doesn't really matter whether we treat any of these things as signed or unsigned, but unsigned seems more straightforward: uid_t/gid_t are unsigned and it simplifies the ngroups overflow check. Tested-by:
-
J. Bruce Fields authored
commit 778e512b upstream. We can use the normal coding infrastructure here. Two minor behavior changes: - we're assuming no wasted space at the end of the linux cred. That seems to match gss-proxy's behavior, and I can't see why it would need to do differently in the future. - NGROUPS_MAX check added: note groups_alloc doesn't do this, this is the caller's responsibility. Tested-by:
-
Anatol Pomozov authored
commit f3cff25f upstream. 'samples' is 64bit operant, but do_div() second parameter is 32. do_div silently truncates high 32 bits and calculated result is invalid. In case if low 32bit of 'samples' are zeros then do_div() produces kernel crash. Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Cc: Jonghwan Choi <jhbird.choi@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit adbe6991 upstream. This fixes a copy and paste error introduced by 9f060e22 ("block: Convert integrity to bvec_alloc_bs()"). Found by Coverity (CID 1020654). Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Kent Overstreet <koverstreet@google.com> Signed-off-by:
-
Andi Kleen authored
commit 89365e6c upstream. Need to check for /dev/zero. Most likely more strings are missing too. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1366848182-30449-1-git-send-email-andi@firstfloor.orgSigned-off-by:
-
