A change introduced with commit 60283df7
("x86/apic: Read Error Status Register correctly") removed a read from the
APIC ESR register made before writing to same required to retrieve the
correct error status on Pentium systems affected by the 3AP erratum[1]:

	"3AP. Writes to Error Register Clears Register

	PROBLEM: The APIC Error register is intended to only be read.
	If there is a write to this register the data in the APIC Error
	register will be cleared and lost.

	IMPLICATION: There is a possibility of clearing the Error
	register status since the write to the register is not
	specifically blocked.

	WORKAROUND: Writes should not occur to the Pentium processor
	APIC Error register.

	STATUS: For the steppings affected see the Summary Table of
	Changes at the beginning of this section."

The steppings affected are actually: B1, B3 and B5.

To avoid this information loss this change avoids the write to
ESR on all Pentium systems where it is actually never needed;
in Pentium processor documentation ESR was noted read-only and
the write only required for future architectural
compatibility[2].

The approach taken is the same as in lapic_setup_esr().

References:

	[1] "Pentium Processor Family Developer's Manual", Intel Corporation,
	    1997, order number 241428-005, Appendix A "Errata and S-Specs for the
	    Pentium Processor Family", p. A-92,

	[2] "Pentium Processor Family Developer's Manual, Volume 3: Architecture
	    and Programming Manual", Intel Corporation, 1995, order number
	    241430-004, Section 19.3.3. "Error Handling In APIC", p. 19-33.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Richard Weinberger <richard@nod.at>
Link: http://lkml.kernel.org/r/alpine.LFD.2.11.1404011300010.27402@eddie.linux-mips.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull x86 LTO changes from Peter Anvin:
 "More infrastructure work in preparation for link-time optimization
  (LTO).  Most of these changes is to make sure symbols accessed from
  assembly code are properly marked as visible so the linker doesn't
  remove them.

  My understanding is that the changes to support LTO are still not
  upstream in binutils, but are on the way there.  This patchset should
  conclude the x86-specific changes, and remaining patches to actually
  enable LTO will be fed through the Kbuild tree (other than keeping up
  with changes to the x86 code base, of course), although not
  necessarily in this merge window"

* 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
  Kbuild, lto: Handle basic LTO in modpost
  Kbuild, lto: Disable LTO for asm-offsets.c
  Kbuild, lto: Add a gcc-ld script to let run gcc as ld
  Kbuild, lto: add ld-version and ld-ifversion macros
  Kbuild, lto: Drop .number postfixes in modpost
  Kbuild, lto, workaround: Don't warn for initcall_reference in modpost
  lto: Disable LTO for sys_ni
  lto: Handle LTO common symbols in module loader
  lto, workaround: Add workaround for initcall reordering
  lto: Make asmlinkage __visible
  x86, lto: Disable LTO for the x86 VDSO
  initconst, x86: Fix initconst mistake in ts5500 code
  initconst: Fix initconst mistake in dcdbas
  asmlinkage: Make trace_hardirqs_on/off_caller visible
  asmlinkage, x86: Fix 32bit memcpy for LTO
  asmlinkage Make __stack_chk_failed and memcmp visible
  asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage
  asmlinkage: Make main_extable_sort_needed visible
  asmlinkage, mutex: Mark __visible
  asmlinkage: Make trace_hardirq visible
  ...

Pull x86 kaslr update from Ingo Molnar:
 "This adds kernel module load address randomization"

* 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kaslr: fix module lock ordering problem
  x86, kaslr: randomize module base load address

Pull x86 hyperv change from Ingo Molnar:
 "Skip the timer_irq_works() check on hyperv systems"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hyperv: Bypass the timer_irq_works() check

Pull x86 hashing changes from Ingo Molnar:
 "Small fixes and cleanups to the librarized arch_fast_hash() methods,
  used by the net/openvswitch code"

* 'x86-hash-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hash: Simplify switch, add __init annotation
  x86, hash: Swap arguments passed to crc32_u32()
  x86, hash: Fix build failure with older binutils

Pull x86 EFI changes from Ingo Molnar:
 "The main changes:

  - Add debug code to the dump EFI pagetable - Borislav Petkov

  - Make 1:1 runtime mapping robust when booting on machines with lots
    of memory - Borislav Petkov

  - Move the EFI facilities bits out of 'x86_efi_facility' and into
    efi.flags which is the standard architecture independent place to
    keep EFI state, by Matt Fleming.

  - Add 'EFI mixed mode' support: this allows 64-bit kernels to be
    booted from 32-bit firmware.  This needs a bootloader that supports
    the 'EFI handover protocol'.  By Matt Fleming"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  x86, efi: Abstract x86 efi_early calls
  x86/efi: Restore 'attr' argument to query_variable_info()
  x86/efi: Rip out phys_efi_get_time()
  x86/efi: Preserve segment registers in mixed mode
  x86/boot: Fix non-EFI build
  x86, tools: Fix up compiler warnings
  x86/efi: Re-disable interrupts after calling firmware services
  x86/boot: Don't overwrite cr4 when enabling PAE
  x86/efi: Wire up CONFIG_EFI_MIXED
  x86/efi: Add mixed runtime services support
  x86/efi: Firmware agnostic handover entry points
  x86/efi: Split the boot stub into 32/64 code paths
  x86/efi: Add early thunk code to go from 64-bit to 32-bit
  x86/efi: Build our own EFI services pointer table
  efi: Add separate 32-bit/64-bit definitions
  x86/efi: Delete dead code when checking for non-native
  x86/mm/pageattr: Always dump the right page table in an oops
  x86, tools: Consolidate #ifdef code
  x86/boot: Cleanup header.S by removing some #ifdefs
  efi: Use NULL instead of 0 for pointer
  ...

Pull x86 debug cleanup from Ingo Molnar:
 "A single trivial cleanup"

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  i386: Remove unneeded test of 'task' in dump_trace() (again)

Pull x86 cpu handling changes from Ingo Molnar:
 "Bigger changes:

   - Intel CPU hardware-enablement: new vector instructions support
     (AVX-512), by Fenghua Yu.

   - Support the clflushopt instruction and use it in appropriate
     places.  clflushopt is similar to clflush but with more relaxed
     ordering, by Ross Zwisler.

   - MSR accessor cleanups, by Borislav Petkov.

   - 'forcepae' boot flag for those who have way too much time to spend
     on way too old Pentium-M systems and want to live way too
     dangerously, by Chris Bainbridge"

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Add forcepae parameter for booting PAE kernels on PAE-disabled Pentium M
  Rename TAINT_UNSAFE_SMP to TAINT_CPU_OUT_OF_SPEC
  x86, intel: Make MSR_IA32_MISC_ENABLE bit constants systematic
  x86, Intel: Convert to the new bit access MSR accessors
  x86, AMD: Convert to the new bit access MSR accessors
  x86: Add another set of MSR accessor functions
  x86: Use clflushopt in drm_clflush_virt_range
  x86: Use clflushopt in drm_clflush_page
  x86: Use clflushopt in clflush_cache_range
  x86: Add support for the clflushopt instruction
  x86, AVX-512: Enable AVX-512 States Context Switch
  x86, AVX-512: AVX-512 Feature Detection

Pull x86 cleanups from Ingo Molnar:
 "Various smaller cleanups"

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, pageattr: Correct WBINVD spelling in comment
  x86, crash: Unify ifdef
  x86, boot: Correct max ramdisk size name

Pull x86 build change from Ingo Molnar:
 "Explicitly disable x87 FPU instructions, to catch mistaken floating
  point use at build time, instead of crashing or misbehaving during run
  time"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Disable generation of traditional x87 instructions

Pull x86 apic changes from Ingo Molnar:
 "An xAPIC CPU hotplug race fix, plus cleanups and minor fixes"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Plug racy xAPIC access of CPU hotplug code
  x86/apic: Always define nox2apic and define it as initdata
  x86/apic: Remove unused function prototypes
  x86/apic: Switch wait_for_init_deassert() to a bool flag
  x86/apic: Only use default_wait_for_init_deassert()

Pull x86 acpi numa fix from Ingo Molnar:
 "A single NUMA CPU hotplug fix"

* 'x86-acpi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, acpi: Fix bug in associating hot-added CPUs with corresponding NUMA node

Pull scheduler changes from Ingo Molnar:
 "Bigger changes:

   - sched/idle restructuring: they are WIP preparation for deeper
     integration between the scheduler and idle state selection, by
     Nicolas Pitre.

   - add NUMA scheduling pseudo-interleaving, by Rik van Riel.

   - optimize cgroup context switches, by Peter Zijlstra.

   - RT scheduling enhancements, by Thomas Gleixner.

  The rest is smaller changes, non-urgnt fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (68 commits)
  sched: Clean up the task_hot() function
  sched: Remove double calculation in fix_small_imbalance()
  sched: Fix broken setscheduler()
  sparc64, sched: Remove unused sparc64_multi_core
  sched: Remove unused mc_capable() and smt_capable()
  sched/numa: Move task_numa_free() to __put_task_struct()
  sched/fair: Fix endless loop in idle_balance()
  sched/core: Fix endless loop in pick_next_task()
  sched/fair: Push down check for high priority class task into idle_balance()
  sched/rt: Fix picking RT and DL tasks from empty queue
  trace: Replace hardcoding of 19 with MAX_NICE
  sched: Guarantee task priority in pick_next_task()
  sched/idle: Remove stale old file
  sched: Put rq's sched_avg under CONFIG_FAIR_GROUP_SCHED
  cpuidle/arm64: Remove redundant cpuidle_idle_call()
  cpuidle/powernv: Remove redundant cpuidle_idle_call()
  sched, nohz: Exclude isolated cores from load balancing
  sched: Fix select_task_rq_fair() description comments
  workqueue: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE
  sys: Replace hardcoding of -20 and 19 with MIN_NICE and MAX_NICE
  ...

Pull perf changes from Ingo Molnar:
 "Main changes:

  Kernel side changes:

   - Add SNB/IVB/HSW client uncore memory controller support (Stephane
     Eranian)

   - Fix various x86/P4 PMU driver bugs (Don Zickus)

  Tooling, user visible changes:

   - Add several futex 'perf bench' microbenchmarks (Davidlohr Bueso)

   - Speed up thread map generation (Don Zickus)

   - Introduce 'perf kvm --list-cmds' command line option for use by
     scripts (Ramkumar Ramachandra)

   - Print the evsel name in the annotate stdio output, prep to fix
     support outputting annotation for multiple events, not just for the
     first one (Arnaldo Carvalho de Melo)

   - Allow setting preferred callchain method in .perfconfig (Jiri Olsa)

   - Show in what binaries/modules 'perf probe's are set (Masami
     Hiramatsu)

   - Support distro-style debuginfo for uprobe in 'perf probe' (Masami
     Hiramatsu)

  Tooling, internal changes and fixes:

   - Use tid in mmap/mmap2 events to find maps (Don Zickus)

   - Record the reason for filtering an address_location (Namhyung Kim)

   - Apply all filters to an addr_location (Namhyung Kim)

   - Merge al->filtered with hist_entry->filtered in report/hists
     (Namhyung Kim)

   - Fix memory leak when synthesizing thread records (Namhyung Kim)

   - Use ui__has_annotation() in 'report' (Namhyung Kim)

   - hists browser refactorings to reuse code accross UIs (Namhyung Kim)

   - Add support for the new DWARF unwinder library in elfutils (Jiri
     Olsa)

   - Fix build race in the generation of bison files (Jiri Olsa)

   - Further streamline the feature detection display, trimming it a bit
     to show just the libraries detected, using VF=1 gets a more verbose
     output, showing the less interesting feature checks as well (Jiri
     Olsa).

   - Check compatible symtab type before loading dso (Namhyung Kim)

   - Check return value of filename__read_debuglink() (Stephane Eranian)

   - Move some hashing and fs related code from tools/perf/util/ to
     tools/lib/ so that it can be used by more tools/ living utilities
     (Borislav Petkov)

   - Prepare DWARF unwinding code for using an elfutils alternative
     unwinding library (Jiri Olsa)

   - Fix DWARF unwind max_stack processing (Jiri Olsa)

   - Add dwarf unwind 'perf test' entry (Jiri Olsa)

   - 'perf probe' improvements including memory leak fixes, sharing the
     intlist class with other tools, uprobes/kprobes code sharing and
     use of ref_reloc_sym (Masami Hiramatsu)

   - Shorten sample symbol resolving by adding cpumode to struct
     addr_location (Arnaldo Carvalho de Melo)

   - Fix synthesizing mmaps for threads (Don Zickus)

   - Fix invalid output on event group stdio report (Namhyung Kim)

   - Fixup header alignment in 'perf sched latency' output (Ramkumar
     Ramachandra)

   - Fix off-by-one error in 'perf timechart record' argv handling
     (Ramkumar Ramachandra)

  Tooling, cleanups:

   - Remove unused thread__find_map function (Jiri Olsa)

   - Remove unused simple_strtoul() function (Ramkumar Ramachandra)

  Tooling, documentation updates:

   - Update function names in debug messages (Ramkumar Ramachandra)

   - Update some code references in design.txt (Ramkumar Ramachandra)

   - Clarify load-latency information in the 'perf mem' docs (Andi
     Kleen)

   - Clarify x86 register naming in 'perf probe' docs (Andi Kleen)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (96 commits)
  perf tools: Remove unused simple_strtoul() function
  perf tools: Update some code references in design.txt
  perf evsel: Update function names in debug messages
  perf tools: Remove thread__find_map function
  perf annotate: Print the evsel name in the stdio output
  perf report: Use ui__has_annotation()
  perf tools: Fix memory leak when synthesizing thread records
  perf tools: Use tid in mmap/mmap2 events to find maps
  perf report: Merge al->filtered with hist_entry->filtered
  perf symbols: Apply all filters to an addr_location
  perf symbols: Record the reason for filtering an address_location
  perf sched: Fixup header alignment in 'latency' output
  perf timechart: Fix off-by-one error in 'record' argv handling
  perf machine: Factor machine__find_thread to take tid argument
  perf tools: Speed up thread map generation
  perf kvm: introduce --list-cmds for use by scripts
  perf ui hists: Pass evsel to hpp->header/width functions explicitly
  perf symbols: Introduce thread__find_cpumode_addr_location
  perf session: Change header.misc dump from decimal to hex
  perf ui/tui: Reuse generic __hpp__fmt() code
  ...

Pull hweight type fix from Ingo Molnar:
 "This lone commit makes sure that __const_hweight8() is unsigned, which
  addresses a build warning if code is built with -Wsign-compare.

  I hope the type cast in this cleanup is fine - another option would be
  to eliminate the double unary negation and use a construct with more
  obvious integer type characteristics, along the lines of:

        ((w) & (1ULL << 1) ? 1U : 0U)

  or so"

* 'core-types-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bitops: Fix signedness of compile-time hweight implementations

Pull RCU updates from Ingo Molnar:
 "Main changes:

   - Torture-test changes, including refactoring of rcutorture and
     introduction of a vestigial locktorture.

   - Real-time latency fixes.

   - Documentation updates.

   - Miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (77 commits)
  rcu: Provide grace-period piggybacking API
  rcu: Ensure kernel/rcu/rcu.h can be sourced/used stand-alone
  rcu: Fix sparse warning for rcu_expedited from kernel/ksysfs.c
  notifier: Substitute rcu_access_pointer() for rcu_dereference_raw()
  Documentation/memory-barriers.txt: Clarify release/acquire ordering
  rcutorture: Save kvm.sh output to log
  rcutorture: Add a lock_busted to test the test
  rcutorture: Place kvm-test-1-run.sh output into res directory
  rcutorture: Rename TREE_RCU-Kconfig.txt
  locktorture: Add kvm-recheck.sh plug-in for locktorture
  rcutorture: Gracefully handle NULL cleanup hooks
  locktorture: Add vestigial locktorture configuration
  rcutorture: Introduce "rcu" directory level underneath configs
  rcutorture: Rename kvm-test-1-rcu.sh
  rcutorture: Remove RCU dependencies from ver_functions.sh API
  rcutorture: Create CFcommon file for common Kconfig parameters
  rcutorture: Create config files for scripted test-the-test testing
  rcutorture: Add an rcu_busted to test the test
  locktorture: Add a lock-torture kernel module
  rcutorture: Abstract kvm-recheck.sh
  ...

Pull core locking updates from Ingo Molnar:
 "The biggest change is the MCS spinlock generalization changes from Tim
  Chen, Peter Zijlstra, Jason Low et al.  There's also lockdep
  fixes/enhancements from Oleg Nesterov, in particular a false negative
  fix related to lockdep_set_novalidate_class() usage"

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  locking/mutex: Fix debug checks
  locking/mutexes: Add extra reschedule point
  locking/mutexes: Introduce cancelable MCS lock for adaptive spinning
  locking/mutexes: Unlock the mutex without the wait_lock
  locking/mutexes: Modify the way optimistic spinners are queued
  locking/mutexes: Return false if task need_resched() in mutex_can_spin_on_owner()
  locking: Move mcs_spinlock.h into kernel/locking/
  m68k: Skip futex_atomic_cmpxchg_inatomic() test
  futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test
  Revert "sched/wait: Suppress Sparse 'variable shadowing' warning"
  lockdep: Change lockdep_set_novalidate_class() to use _and_name
  lockdep: Change mark_held_locks() to check hlock->check instead of lockdep_no_validate
  lockdep: Don't create the wrong dependency on hlock->check == 0
  lockdep: Make held_lock->check and "int check" argument bool
  locking/mcs: Allow architecture specific asm files to be used for contended case
  locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order
  sched/wait: Suppress Sparse 'variable shadowing' warning
  hung_task/Documentation: Fix hung_task_warnings description
  locking/mcs: Allow architectures to hook in to contended paths
  locking/mcs: Micro-optimize the MCS code, add extra comments
  ...

Pull vfs fixes from Al Viro:
 "Switch mnt_hash to hlist, turning the races between __lookup_mnt() and
  hash modifications into false negatives from __lookup_mnt() (instead
  of hangs)"

On the false negatives from __lookup_mnt():
 "The *only* thing we care about is not getting stuck in __lookup_mnt().
  If it misses an entry because something in front of it just got moved
  around, etc, we are fine.  We'll notice that mount_lock mismatch and
  that'll be it"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  switch mnt_hash to hlist
  don't bother with propagate_mnt() unless the target is shared
  keep shadowed vfsmounts together
  resizable namespace.c hashes

I am the new kernel tree Documentation maintainer (except for parts that
are handled by other people, of course).
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull input updates from Dmitry Torokhov:
 "Some more updates for the input subsystem.

  You will get a fix for race in mousedev that has been causing quite a
  few oopses lately and a small fixup for force feedback support in
  evdev"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: mousedev - fix race when creating mixed device
  Input: don't modify the id of ioctl-provided ff effect on upload failure

It its possible to configure your PAM stack to refuse login if audit
messages (about the login) were unable to be sent.  This is common in
many distros and thus normal configuration of many containers.  The PAM
modules determine if audit is enabled/disabled in the kernel based on
the return value from sending an audit message on the netlink socket.
If userspace gets back ECONNREFUSED it believes audit is disabled in the
kernel.  If it gets any other error else it refuses to let the login
proceed.

Just about ever since the introduction of namespaces the kernel audit
subsystem has returned EPERM if the task sending a message was not in
the init user or pid namespace.  So many forms of containers have never
worked if audit was enabled in the kernel.

BUT if the container was not in net_init then the kernel network code
would send ECONNREFUSED (instead of the audit code sending EPERM).  Thus
by pure accident/dumb luck/bug if an admin configured the PAM stack to
reject all logins that didn't talk to audit, but then ran the login
untility in the non-init_net namespace, it would work!! Clearly this was
a bug, but it is a bug some people expected.

With the introduction of network namespace support in 3.14-rc1 the two
bugs stopped cancelling each other out.  Now, containers in the
non-init_net namespace refused to let users log in (just like PAM was
configfured!) Obviously some people were not happy that what used to let
users log in, now didn't!

This fix is kinda hacky.  We return ECONNREFUSED for all non-init
relevant namespaces.  That means that not only will the old broken
non-init_net setups continue to work, now the broken non-init_pid or
non-init_user setups will 'work'.  They don't really work, since audit
isn't logging things.  But it's what most users want.

In 3.15 we should have patches to support not only the non-init_net
(3.14) namespace but also the non-init_pid and non-init_user namespace.
So all will be right in the world.  This just opens the doors wide open
on 3.14 and hopefully makes users happy, if not the audit system...
Reported-by: Andre Tomt <andre@tomt.net>
Reported-by: Adam Richter <adam_richter2004@yahoo.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use cmpxchg() to atomically set i_flags instead of clearing out the
S_IMMUTABLE, S_APPEND, etc. flags and then setting them from the
EXT4_IMMUTABLE_FL, EXT4_APPEND_FL flags, since this opens up a race
where an immutable file has the immutable flag cleared for a brief
window of time.
Reported-by: John Sullivan <jsrhbz@kanargh.force9.co.uk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fixes RCU bug - walking through hlist is safe in face of element moves,
since it's self-terminating.  Cyclic lists are not - if we end up jumping
to another hash chain, we'll loop infinitely without ever hitting the
original list head.

[fix for dumb braino folded]

Spotted by: Max Kellermann <mk@cm4all.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

If the dest_mnt is not shared, propagate_mnt() does nothing -
there's no mounts to propagate to and thus no copies to create.
Might as well don't bother calling it in that case.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

preparation to switching mnt_hash to hlist

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* switch allocation to alloc_large_system_hash()
* make sizes overridable by boot parameters (mhash_entries=, mphash_entries=)
* switch mountpoint_hashtable from list_head to hlist_head

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull timer fix from Ingo Molnar:
 "A late breaking fix from John.  (The bug fixed has a hard lockup
  potential, but that was not observed, warnings were)"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  time: Revert to calling clock_was_set_delayed() while in irq context

Pull Ceph fix from Sage Weil:
 "This drops a bad assert that a few users have been hitting but we've
  only recently been able to track down"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: drop an unsafe assertion

We should not be using static variable mousedev_mix in methods that can be
called before that singleton gets assigned. While at it let's add open and
close methods to mousedev structure so that we do not need to test if we
are dealing with multiplexor or normal device and simply call appropriate
method directly.

This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=71551Reported-by: GiulioDP <depasquale.giulio@gmail.com>
Tested-by: GiulioDP <depasquale.giulio@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

If a new (id == -1) ff effect was uploaded from userspace,
ff-core.c::input_ff_upload() will have assigned a positive number to the
new effect id.  Currently, evdev.c::evdev_do_ioctl() will save this new id
to userspace, regardless of whether the upload succeeded or not.

On upload failure, this can be confusing because the dev->ff->effects[]
array will not contain an element at the index of that new effect id.

This patch fixes this by leaving the id unchanged after upload fails.

Note: Unfortunately applications should still expect changed effect id for
quite some time.

This has been discussed on:
http://www.mail-archive.com/linux-input@vger.kernel.org/msg08513.html
("ff-core effect id handling in case of a failed effect upload")
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Elias Vanderstuyft <elias.vds@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Olivier Bonvalet reported having repeated crashes due to a failed
assertion he was hitting in rbd_img_obj_callback():

    Assertion failure in rbd_img_obj_callback() at line 2165:
	rbd_assert(which >= img_request->next_completion);

With a lot of help from Olivier with reproducing the problem
we were able to determine the object and image requests had
already been completed (and often freed) at the point the
assertion failed.

There was a great deal of discussion on the ceph-devel mailing list
about this.  The problem only arose when there were two (or more)
object requests in an image request, and the problem was always
seen when the second request was being completed.

The problem is due to a race in the window between setting the
"done" flag on an object request and checking the image request's
next completion value.  When the first object request completes, it
checks to see if its successor request is marked "done", and if
so, that request is also completed.  In the process, the image
request's next_completion value is updated to reflect that both
the first and second requests are completed.  By the time the
second request is able to check the next_completion value, it
has been set to a value *greater* than its own "which" value,
which caused an assertion to fail.

Fix this problem by skipping over any completion processing
unless the completing object request is the next one expected.
Test only for inequality (not >=), and eliminate the bad
assertion.
Tested-by: Olivier Bonvalet <ob@daevel.fr>
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sage Weil <sage@inktank.com>
Reviewed-by: Ilya Dryomov <ilya.dryomov@inktank.com>

Pull networking fixes from David Miller:

 1) We've discovered a common error in several networking drivers, they
    put VLAN offload features into ->vlan_features, which would suggest
    that they support offloading 2 or more levels of VLAN encapsulation.
    Not only do these devices not do that, but we don't have the
    infrastructure yet to handle that at all.

    Fixes from Vlad Yasevich.

 2) Fix tcpdump crash with bridging and vlans, also from Vlad.

 3) Some MAINTAINERS updates for random32 and bonding.

 4) Fix late reseeds of prandom generator, from Sasha Levin.

 5) Bridge doesn't handle stacked vlans properly, fix from Toshiaki
    Makita.

 6) Fix deadlock in openvswitch, from Flavio Leitner.

 7) get_timewait4_sock() doesn't report delay times correctly, fix from
    Eric Dumazet.

 8) Duplicate address detection and addrconf verification need to run in
    contexts where RTNL can be obtained.  Move them to run from a
    workqueue.  From Hannes Frederic Sowa.

 9) Fix route refcount leaking in ip tunnels, from Pravin B Shelar.

10) Don't return -EINTR from non-blocking recvmsg() on AF_UNIX sockets,
    from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits)
  vlan: Warn the user if lowerdev has bad vlan features.
  veth: Turn off vlan rx acceleration in vlan_features
  ifb: Remove vlan acceleration from vlan_features
  qlge: Do not propaged vlan tag offloads to vlans
  bridge: Fix crash with vlan filtering and tcpdump
  net: Account for all vlan headers in skb_mac_gso_segment
  MAINTAINERS: bonding: change email address
  MAINTAINERS: bonding: change email address
  ipv6: move DAD and addrconf_verify processing to workqueue
  tcp: fix get_timewait4_sock() delay computation on 64bit
  openvswitch: fix a possible deadlock and lockdep warning
  bridge: Fix handling stacked vlan tags
  bridge: Fix inabillity to retrieve vlan tags when tx offload is disabled
  vhost: validate vhost_get_vq_desc return value
  vhost: fix total length when packets are too short
  random32: avoid attempt to late reseed if in the middle of seeding
  random32: assign to network folks in MAINTAINERS
  net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset
  core, nfqueue, openvswitch: Orphan frags in skb_zerocopy and handle errors
  vlan: Set hard_header_len according to available acceleration
  ...

Vlad Yasevich says:

====================
Audit all drivers for correct vlan_features.

Some drivers set vlan acceleration features in vlan_features.  This causes
issues with Q-in-Q/802.1ad configurations.

Audit all the drivers for correct vlan_features.  Fix broken ones.
Add a warning to vlan code to help catch future offenders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Some drivers incorrectly assign vlan acceleration features to
vlan_features thus causing issues for Q-in-Q vlan configurations.
Warn the user of such cases.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For completeness, turn off vlan rx acceleration in vlan_features so
that it doesn't show up on q-in-q setups.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not include vlan acceleration features in vlan_features as that
precludes correct Q-in-Q operation.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

qlge driver turns off NETIF_F_HW_CTAG_FILTER, but forgets to
turn off HW_CTAG_TX and HW_CTAG_RX on vlan devices.  With the
current settings, q-in-q will only generate a single vlan header.
Remember to mask off CTAG_TX and CTAG_RX features in vlan_features.

CC: Shahed Shaikh <shahed.shaikh@qlogic.com>
CC: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
CC: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the vlan filtering is enabled on the bridge, but
the filter is not configured on the bridge device itself,
running tcpdump on the bridge device will result in a
an Oops with NULL pointer dereference.  The reason
is that br_pass_frame_up() will bypass the vlan
check because promisc flag is set.  It will then try
to get the table pointer and process the packet based
on the table.  Since the table pointer is NULL, we oops.
Catch this special condition in br_handle_vlan().
Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
CC: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>

skb_network_protocol() already accounts for multiple vlan
headers that may be present in the skb.  However, skb_mac_gso_segment()
doesn't know anything about it and assumes that skb->mac_len
is set correctly to skip all mac headers.  That may not
always be the case.  If we are simply forwarding the packet (via
bridge or macvtap), all vlan headers may not be accounted for.

A simple solution is to allow skb_network_protocol to return
the vlan depth it has calculated.  This way skb_mac_gso_segment
will correctly skip all mac headers.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>