- 05 Jun, 2013 1 commit
-
-
Anisse Astier authored
This fixes the internal and external mic on Ordissimo EVE2, also known as Malata PC-B1303. We still don't know how to detect mic jack like Realtek's windows driver. Signed-off-by:
Anisse Astier <anisse@astier.eu> Signed-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 31 May, 2013 4 commits
-
-
Adrian Knoth authored
Similarly to MADI, WordClock can also be at SingleSpeed while the card is actually working at twice or four times this rate. If so, multiply the base rate accordingly. Signed-off-by:
Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by:
-
Adrian Knoth authored
When the DoubleSpeed or QuadSpeed bit is set, the SingleSpeed frequency has to be multiplied accordingly. Since this functionality will be required at least twice, refactor it into a separate function. The second reference to the newly introduced hdspm_rate_multiplier() will be in a separate commit. Signed-off-by:
-
Adrian Knoth authored
Allow WordClock input rates of 128, 176.4 and 192kHz. Signed-off-by:
-
Ondrej Zary authored
Add support for TEA5757 tuner on MediaForte M56VAP sound+modem+radio card. The GPIO connection type is automatically detected (like snd-fm801 driver). Also add a safety subsystem vendor check to skip radio detection if vendor differs from ESS (so we don't touch GPIOs on laptops). Tested with SF64-PCE2 and M56VAP cards. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
- 29 May, 2013 4 commits
-
-
Takashi Iwai authored
A few calls are still left in parport drivers after this commit, which I'm not quite sure yet. Signed-off-by: -
Takashi Iwai authored
Similarly like the previous commit for PCI drivers, remove dev_set_drvdata(NULL) and pnp_set_drvdata(NULL) calls in ISA drivers now. Signed-off-by: -
Takashi Iwai authored
Only kahlua.c has it. Signed-off-by: -
Takashi Iwai authored
As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by:
-
- 28 May, 2013 1 commit
-
-
Takashi Iwai authored
The newer HP laptops have SSID 103c:20xx and 103c:21xx, and these usually have the mic-mute LED on Fn-F8. Let's enable it, too. Signed-off-by:
-
- 24 May, 2013 3 commits
-
-
Takashi Iwai authored
Currently ALSA supports up to 32 card instances when the dynamic minor is used. While 32 cards are usually big enough for normal use cases, there are sometimes weird requirements with more card support. Actually, this limitation, 32, comes from the index option, where you can pass the bit mask to assign the card. Other than that, we can actually give more cards up to the minor number limits (currently 256, which can be extended more, too). This patch adds a new Kconfig to specify the max card numbers, and changes a few places to accept more than 32 cards. The only incompatibility with high card numbers would be the handling of index option. The index option can be still used to pass the bitmask for card assignments, but this works only up to 32 slots. More than 32, no bitmask style option is available but only a single slot can be specified via index option. Signed-off-by: -
Takashi Iwai authored
ALSA core tries to add a suffix as "_1" automatically when the given id string conflicts. The current code assumes implicitly that the max card number is 16 so that the single hex "_X" suffix can be put. However, with the dynamic device management, the card can be at most 32, so it can put even a non-hex character there. Also, when the max card number is increased in future, this would result in worse. This patch rewrites the code to add the suffix string in a simpler (thus cleaner) way. It can support up to three digits, so it should suffice for most requirements. Signed-off-by: -
Lars-Peter Clausen authored
The ops field of the snd_pcm_substream struct is never modified inside the ALSA core. Making it const allows drivers to declare their snd_pcm_ops struct as const. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
- 23 May, 2013 11 commits
-
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Cc: Rafael Ignacio Zurita <rizurita@yahoo.com> Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
Sachin Kamat authored
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by:
-
- 17 May, 2013 2 commits
-
-
Chew, Chiau Ee authored
Add HD Audio Device PCI ID for the Intel BayTrail platform. Signed-off-by:
Chew, Chiau Ee <chiau.ee.chew@intel.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
Torstein Hegge authored
freqshift is only set for the data endpoint and syncmaxsize is only set for the sync endpoint. This results in a syncmaxsize of zero used in the proc output feedback format calculation, which gives a feedback format incorrectly shown as 8.16 for UAC2 devices. As neither the data nor the sync endpoint gives all the relevant content, output the two combined. Also remove the sync_endpoint "packet size" which is always zero and the sync_endpoint "momentary freq" which is constant. Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async. Reported-by:
B. Zhang <bb.zhang@free.fr> Signed-off-by:
Torstein Hegge <hegge@resisty.net> Signed-off-by:
-
- 16 May, 2013 4 commits
-
-
David Henningsson authored
BugLink: https://bugs.launchpad.net/bugs/1180351Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
Michael Ellerman authored
Either one or a combination of commits 81e5d864 "Register i2c devices from device-tree" and 3a3dd018 "Improve detection of devices from device-tree" broke sound on PowerBook6,5 machines. Fix it by adding an entry to the new driver to match PowerBook6,5 machines. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Acked-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Takashi Iwai authored
Merge tag 'asoc-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v3.10 A few small driver-specific fixes, none of them especially crippling.
-
Takashi Iwai authored
When an inactive path is powered down with spec->power_down_unused flag, we should check the activity of each widget in the path whether it's still referred from any active path. Signed-off-by:
-
- 14 May, 2013 3 commits
-
-
Mark Brown authored
-
Mark Brown authored
-
Mark Brown authored
-
- 13 May, 2013 1 commit
-
-
Paul Bolle authored
Commit d4702b18 ("sound: Fix make allmodconfig on MIPS") added a (negative) dependency on ISA_DMA_SUPPORT_BROKEN. Since that Kconfig symbol doesn't exist, this dependency will always evaluate to true. Apparently GENERIC_ISA_DMA_SUPPORT_BROKEN was meant to be used here. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
- 12 May, 2013 2 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing/kprobes update from Steven Rostedt: "The majority of these changes are from Masami Hiramatsu bringing kprobes up to par with the latest changes to ftrace (multi buffering and the new function probes). He also discovered and fixed some bugs in doing so. When pulling in his patches, I also found a few minor bugs as well and fixed them. This also includes a compile fix for some archs that select the ring buffer but not tracing. I based this off of the last patch you took from me that fixed the merge conflict error, as that was the commit that had all the changes I needed for this set of changes." * tag 'trace-fixes-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/kprobes: Support soft-mode disabling tracing/kprobes: Support ftrace_event_file base multibuffer tracing/kprobes: Pass trace_probe directly from dispatcher tracing/kprobes: Increment probe hit-count even if it is used by perf tracing/kprobes: Use bool for retprobe checker ftrace: Fix function probe when more than one probe is added ftrace: Fix the output of enabled_functions debug file ftrace: Fix locking in register_ftrace_function_probe() tracing: Add helper function trace_create_new_event() to remove duplicate code tracing: Modify soft-mode only if there's no other referrer tracing: Indicate enabled soft-mode in enable file tracing/kprobes: Fix to increment return event probe hit-count ftrace: Cleanup regex_lock and ftrace_lock around hash updating ftrace, kprobes: Fix a deadlock on ftrace_regex_lock ftrace: Have ftrace_regex_write() return either read or error tracing: Return error if register_ftrace_function_probe() fails for event_enable_func() tracing: Don't succeed if event_enable_func did not register anything ring-buffer: Select IRQ_WORK
-
- 11 May, 2013 4 commits
-
-
Linus Torvalds authored
Merge tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull second SCSI update from James "Jaj B" Bottomley: "This is the final round of SCSI patches for the merge window. It consists mostly of driver updates (bnx2fc, ibmfc, fnic, lpfc, be2iscsi, pm80xx, qla4x and ipr). There's also the power management updates that complete the patches in Jens' tree, an iscsi refcounting problem fix from the last pull, some dif handling in scsi_debug fixes, a few nice code cleanups and an error handling busy bug fix." * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (92 commits) [SCSI] qla2xxx: Update firmware link in Kconfig file. [SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are used [SCSI] sas: unify the pointlessly separated enums sas_dev_type and sas_device_type [SCSI] pm80xx: thermal, sas controller config and error handling update [SCSI] pm80xx: NCQ error handling changes [SCSI] pm80xx: WWN Modification for PM8081/88/89 controllers [SCSI] pm80xx: Changed module name and debug messages update [SCSI] pm80xx: Firmware flash memory free fix, with addition of new memory region for it [SCSI] pm80xx: SPC new firmware changes for device id 0x8081 alone [SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files [SCSI] pm80xx: MSI-X implementation for using 64 interrupts [SCSI] pm80xx: Updated common functions common for SPC and SPCv/ve [SCSI] pm80xx: Multiple inbound/outbound queue configuration [SCSI] pm80xx: Added SPCv/ve specific ids, variables and modify for SPC [SCSI] lpfc: fix up Kconfig dependencies [SCSI] Handle MLQUEUE busy response in scsi_send_eh_cmnd [SCSI] sd: change to auto suspend mode [SCSI] sd: use REQ_PM in sd's runtime suspend operation [SCSI] qla4xxx: Fix iocb_cnt calculation in qla4xxx_send_mbox_iocb() [SCSI] ufs: Correct the expected data transfersize ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linuxLinus Torvalds authored
Pull idle update from Len Brown: "Add support for new Haswell-ULT CPU idle power states" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: initial C8, C9, C10 support tools/power turbostat: display C8, C9, C10 residency
-
git://git.infradead.org/users/eparis/auditLinus Torvalds authored
Pull audit changes from Eric Paris: "Al used to send pull requests every couple of years but he told me to just start pushing them to you directly. Our touching outside of core audit code is pretty straight forward. A couple of interface changes which hit net/. A simple argument bug calling audit functions in namei.c and the removal of some assembly branch prediction code on ppc" * git://git.infradead.org/users/eparis/audit: (31 commits) audit: fix message spacing printing auid Revert "audit: move kaudit thread start from auditd registration to kaudit init" audit: vfs: fix audit_inode call in O_CREAT case of do_last audit: Make testing for a valid loginuid explicit. audit: fix event coverage of AUDIT_ANOM_LINK audit: use spin_lock in audit_receive_msg to process tty logging audit: do not needlessly take a lock in tty_audit_exit audit: do not needlessly take a spinlock in copy_signal audit: add an option to control logging of passwords with pam_tty_audit audit: use spin_lock_irqsave/restore in audit tty code helper for some session id stuff audit: use a consistent audit helper to log lsm information audit: push loginuid and sessionid processing down audit: stop pushing loginid, uid, sessionid as arguments audit: remove the old depricated kernel interface audit: make validity checking generic audit: allow checking the type of audit message in the user filter audit: fix build break when AUDIT_DEBUG == 2 audit: remove duplicate export of audit_enabled Audit: do not print error when LSMs disabled ...
-
