- 13 Dec, 2014 36 commits
-
-
Joonsoo Kim authored
Now, we have prepared to avoid using debug-pagealloc in boottime. So introduce new kernel-parameter to disable debug-pagealloc in boottime, and makes related functions to be disabled in this case. Only non-intuitive part is change of guard page functions. Because guard page is effective only if debug-pagealloc is enabled, turning off according to debug-pagealloc is reasonable thing to do. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Dave Hansen <dave@sr71.net> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Jungsoo Son <jungsoo.son@lge.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joonsoo Kim authored
Until now, debug-pagealloc needs extra flags in struct page, so we need to recompile whole source code when we decide to use it. This is really painful, because it takes some time to recompile and sometimes rebuild is not possible due to third party module depending on struct page. So, we can't use this good feature in many cases. Now, we have the page extension feature that allows us to insert extra flags to outside of struct page. This gets rid of third party module issue mentioned above. And, this allows us to determine if we need extra memory for this page extension in boottime. With these property, we can avoid using debug-pagealloc in boottime with low computational overhead in the kernel built with CONFIG_DEBUG_PAGEALLOC. This will help our development process greatly. This patch is the preparation step to achive above goal. debug-pagealloc originally uses extra field of struct page, but, after this patch, it will use field of struct page_ext. Because memory for page_ext is allocated later than initialization of page allocator in CONFIG_SPARSEMEM, we should disable debug-pagealloc feature temporarily until initialization of page_ext. This patch implements this. Signed-off-by:
-
Joonsoo Kim authored
When we debug something, we'd like to insert some information to every page. For this purpose, we sometimes modify struct page itself. But, this has drawbacks. First, it requires re-compile. This makes us hesitate to use the powerful debug feature so development process is slowed down. And, second, sometimes it is impossible to rebuild the kernel due to third party module dependency. At third, system behaviour would be largely different after re-compile, because it changes size of struct page greatly and this structure is accessed by every part of kernel. Keeping this as it is would be better to reproduce errornous situation. This feature is intended to overcome above mentioned problems. This feature allocates memory for extended data per page in certain place rather than the struct page itself. This memory can be accessed by the accessor functions provided by this code. During the boot process, it checks whether allocation of huge chunk of memory is needed or not. If not, it avoids allocating memory at all. With this advantage, we can include this feature into the kernel in default and can avoid rebuild and solve related problems. Until now, memcg uses this technique. But, now, memcg decides to embed their variable to struct page itself and it's code to extend struct page has been removed. I'd like to use this code to develop debug feature, so this patch resurrect it. To help these things to work well, this patch introduces two callbacks for clients. One is the need callback which is mandatory if user wants to avoid useless memory allocation at boot-time. The other is optional, init callback, which is used to do proper initialization after memory is allocated. Detailed explanation about purpose of these functions is in code comment. Please refer it. Others are completely same with previous extension code in memcg. Signed-off-by:
-
Jianyu Zhan authored
GFP_USER, GFP_HIGHUSER and GFP_HIGHUSER_MOVABLE are escalatedly confined defined, also implied by their names: GFP_USER = GFP_USER GFP_USER + __GFP_HIGHMEM = GFP_HIGHUSER GFP_USER + __GFP_HIGHMEM + __GFP_MOVABLE = GFP_HIGHUSER_MOVABLE So just make GFP_HIGHUSER and GFP_HIGHUSER_MOVABLE escalatedly defined to reflect this fact. It also makes the definition clear and texturally warn on any furture break-up of this escalated relastionship. Signed-off-by:
Jianyu Zhan <jianyu.zhan@emc.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Andrew Morton authored
include/linux/kmemleak.h: In function 'kmemleak_alloc_recursive': include/linux/kmemleak.h:43: error: 'SLAB_NOLEAKTRACE' undeclared (first use in this function) Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Zhang Zhen authored
The gfp was passed in but never used in this function. Signed-off-by:
Zhang Zhen <zhenzhang.zhang@huawei.com> Signed-off-by:
-
Tejun Heo authored
swp_entry_t being defined in include/linux/swap.h instead of include/linux/mm_types.h causes cyclic include dependency later when include/linux/page_cgroup.h is included from writeback path. Move the definition to include/linux/mm_types.h. While at it, reformat the comment above it. Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Zhang Zhen authored
This is just a small optimization. The start_pfn can be obtained directly by phys_index << PFN_SECTION_SHIFT. So the call of page_to_pfn() is redundant and remove it. Signed-off-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Acked-by:
-
Jesse Barnes authored
This could be useful for debug in the future if we want to track major/minor faults more closely, and also avoids the put_page trick we used with gup. In order to do this, we also track the task struct in the PASID state structure. This lets us update the appropriate task stats after the fault has been handled, and may aid with debug in the future as well. Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Tested-by:
Oded Gabbay <oded.gabbay@amd.com> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Jesse Barnes authored
This lets drivers like the AMD IOMMUv2 driver handle faults a bit more simply, rather than doing tricks with page refs and get_user_pages(). Signed-off-by:
-
Luiz Capitulino authored
This function is only called during initialization. Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Luiz Capitulino authored
No reason to duplicate the code of an existing macro. Signed-off-by:
-
Luiz Capitulino authored
The hugepages= entry in kernel-parameters.txt states that 1GB pages can only be allocated at boot time and not freed afterwards. This is not true since commit 944d9fec ("hugetlb: add support for gigantic page allocation at runtime"), at least for x86_64. Instead of adding arch-specifc observations to the hugepages= entry, this commit just drops the out of date information. Further information about arch-specific support and available features can be obtained in the hugetlb documentation. Signed-off-by:
-
Vladimir Davydov authored
It isn't supposed to stack, so turn it into a bit-field to save 4 bytes on the task_struct. Also, remove the memcg_stop/resume_kmem_account helpers - it is clearer to set/clear the flag inline. Regarding the overwhelming comment to the helpers, which is removed by this patch too, we already have a compact yet accurate explanation in memcg_schedule_cache_create, no need in yet another one. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by:
-
Vladimir Davydov authored
__memcg_kmem_get_cache can recurse if it calls kmalloc (which it does if the cgroup's kmem cache doesn't exist), because kmalloc may call __memcg_kmem_get_cache internally again. To avoid the recursion, we use the task_struct->memcg_kmem_skip_account flag. However, there's no need checking the flag in memcg_kmem_newpage_charge, because there's no way how this function could result in recursion, if called from memcg_kmem_get_cache. So let's remove the redundant code. Signed-off-by:
-
Vladimir Davydov authored
The only such flag is KMEM_ACCOUNTED_ACTIVE, but it's set iff mem_cgroup->kmemcg_id is initialized, so we can check kmemcg_id instead of having a separate flags field. Signed-off-by:
-
Weijie Yang authored
When the encountered pte is a swap entry, the current code handles two cases: migration and normal swapentry, but we have a third case: hwpoison page. This patch adds hwpoison page handle, consider hwpoison page incore as same as migration. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Weijie Yang <weijie.yang@samsung.com> Acked-by:
-
Davidlohr Bueso authored
Call page_to_pgoff() to get the page offset once we are sure we actually need it, and any very obvious initial function checks have passed. Trivial micro-optimization, and potentially save some cycles. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Joonsoo Kim authored
Page guard is used by debug-pagealloc feature. Currently, it is open-coded, but, I think that more abstraction of it makes core page allocator code more readable. There is no functional difference. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Gioh Kim <gioh.kim@lge.com> Signed-off-by:
-
Tony Luck authored
There is a lot of duplication in the rubric around actually setting or clearing a mem region flag. Create a new helper function to do this and reduce each of memblock_mark_hotplug() and memblock_clear_hotplug() to a single line. This will be useful if someone were to add a new mem region flag - which I hope to be doing some day soon. But it looks like a plausible cleanup even without that - so I'd like to get it out of the way now. Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Philipp Hachtmann <phacht@linux.vnet.ibm.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Emil Medve <Emilian.Medve@freescale.com> Signed-off-by:
-
Vladimir Davydov authored
task_struct->memcg_kmem_skip_account was initially introduced to avoid recursion during kmem cache creation: memcg_kmem_get_cache, which is called by kmem_cache_alloc to determine the per-memcg cache to account allocation to, may issue lazy cache creation if the needed cache doesn't exist, which means issuing yet another kmem_cache_alloc. We can't just pass a flag to the nested kmem_cache_alloc disabling kmem accounting, because there are hidden allocations, e.g. in INIT_WORK. So we introduced a flag on the task_struct, memcg_kmem_skip_account, making memcg_kmem_get_cache return immediately. By its nature, the flag may also be used to disable accounting for allocations shared among different cgroups, and currently it is used this way in memcg_activate_kmem. Using it like this looks like abusing it to me. If we want to disable accounting for some allocations (which we will definitely want one day), we should either add GFP_NO_MEMCG or GFP_MEMCG flag in order to blacklist/whitelist some allocations. For now, let's simply remove memcg_stop/resume_kmem_account from memcg_activate_kmem. Signed-off-by:
-
Vladimir Davydov authored
We already assured the current task has mm in memcg_kmem_should_charge, no need to double check. Signed-off-by:
-
Vladimir Davydov authored
cpuset code stopped using cgroup_lock in favor of cpuset_mutex long ago. Signed-off-by:
-
Gregory Fong authored
The alignment in cma_alloc() was done w.r.t. the bitmap. This is a problem when, for example: - a device requires 16M (order 12) alignment - the CMA region is not 16 M aligned In such a case, can result with the CMA region starting at, say, 0x2f800000 but any allocation you make from there will be aligned from there. Requesting an allocation of 32 M with 16 M alignment will result in an allocation from 0x2f800000 to 0x31800000, which doesn't work very well if your strange device requires 16M alignment. Change to use bitmap_find_next_zero_area_off() to account for the difference in alignment at reserve-time and alloc-time. Signed-off-by:
Gregory Fong <gregory.0xf0@gmail.com> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Laura Abbott <lauraa@codeaurora.org> Signed-off-by:
-
Michal Nazarewicz authored
Add a bitmap_find_next_zero_area_off() function which works like bitmap_find_next_zero_area() function except it allows an offset to be specified when alignment is checked. This lets caller request a bit such that its number plus the offset is aligned according to the mask. [gregory.0xf0@gmail.com: Retrieved from https://patchwork.linuxtv.org/patch/6254/ and updated documentation] Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Davidlohr Bueso authored
The unmap_mapping_range family of functions do the unmapping of user pages (ultimately via zap_page_range_single) without touching the actual interval tree, thus share the lock. Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Davidlohr Bueso authored
Shrinking/truncate logic can call nommu_shrink_inode_mappings() to verify that any shared mappings of the inode in question aren't broken (dead zone). afaict the only user being ramfs to handle the size change attribute. Pretty much a no-brainer to share the lock. Signed-off-by:
"Kirill A. Shutemov" <kirill@shutemov.name> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
-
Davidlohr Bueso authored
No brainer conversion: collect_procs_file() only schedules a process for later kill, share the lock, similarly to the anon vma variant. Signed-off-by:
-
Davidlohr Bueso authored
__xip_unmap() will remove the xip sparse page from the cache and take down pte mapping, without altering the interval tree, thus share the i_mmap_rwsem when searching for the ptes to unmap. Additionally, tidy up the function a bit and make variables only local to the interval tree walk loop. Signed-off-by:
-
Davidlohr Bueso authored
Both register and unregister call build_map_info() in order to create the list of mappings before installing or removing breakpoints for every mm which maps file backed memory. As such, there is no reason to hold the i_mmap_rwsem exclusively, so share it and allow concurrent readers to build the mapping data. Signed-off-by:
Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by:
-
Davidlohr Bueso authored
Similarly to the anon memory counterpart, we can share the mapping's lock ownership as the interval tree is not modified when doing doing the walk, only the file page. Signed-off-by:
Rik van Riel <riel@redhat.com> Acked-by:
-
Davidlohr Bueso authored
The i_mmap_mutex is a close cousin of the anon vma lock, both protecting similar data, one for file backed pages and the other for anon memory. To this end, this lock can also be a rwsem. In addition, there are some important opportunities to share the lock when there are no tree modifications. This conversion is straightforward. For now, all users take the write lock. [sfr@canb.auug.org.au: update fremap.c] Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Davidlohr Bueso authored
Convert all open coded mutex_lock/unlock calls to the i_mmap_[lock/unlock]_write() helpers. Signed-off-by:
-
Davidlohr Bueso authored
This series is a continuation of the conversion of the i_mmap_mutex to rwsem, following what we have for the anon memory counterpart. With Hugh's feedback from the first iteration. Ultimately, the most obvious paths that require exclusive ownership of the lock is when we modify the VMA interval tree, via vma_interval_tree_insert() and vma_interval_tree_remove() families. Cases such as unmapping, where the ptes content is changed but the tree remains untouched should make it safe to share the i_mmap_rwsem. As such, the code of course is straightforward, however the devil is very much in the details. While its been tested on a number of workloads without anything exploding, I would not be surprised if there are some less documented/known assumptions about the lock that could suffer from these changes. Or maybe I'm just missing something, but either way I believe its at the point where it could use more eyes and hopefully some time in linux-next. Because the lock type conversion is the heart of this patchset, its worth noting a few comparisons between mutex vs rwsem (xadd): (i) Same size, no extra footprint. (ii) Both have CONFIG_XXX_SPIN_ON_OWNER capabilities for exclusive lock ownership. (iii) Both can be slightly unfair wrt exclusive ownership, with writer lock stealing properties, not necessarily respecting FIFO order for granting the lock when contended. (iv) Mutexes can be slightly faster than rwsems when the lock is non-contended. (v) Both suck at performance for debug (slowpaths), which shouldn't matter anyway. Sharing the lock is obviously beneficial, and sem writer ownership is close enough to mutexes. The biggest winner of these changes is migration. As for concrete numbers, the following performance results are for a 4-socket 60-core IvyBridge-EX with 130Gb of RAM. Both alltests and disk (xfs+ramdisk) workloads of aim7 suite do quite well with this set, with a steady ~60% throughput (jpm) increase for alltests and up to ~30% for disk for high amounts of concurrency. Lower counts of workload users (< 100) does not show much difference at all, so at least no regressions. 3.18-rc1 3.18-rc1-i_mmap_rwsem alltests-100 17918.72 ( 0.00%) 28417.97 ( 58.59%) alltests-200 16529.39 ( 0.00%) 26807.92 ( 62.18%) alltests-300 16591.17 ( 0.00%) 26878.08 ( 62.00%) alltests-400 16490.37 ( 0.00%) 26664.63 ( 61.70%) alltests-500 16593.17 ( 0.00%) 26433.72 ( 59.30%) alltests-600 16508.56 ( 0.00%) 26409.20 ( 59.97%) alltests-700 16508.19 ( 0.00%) 26298.58 ( 59.31%) alltests-800 16437.58 ( 0.00%) 26433.02 ( 60.81%) alltests-900 16418.35 ( 0.00%) 26241.61 ( 59.83%) alltests-1000 16369.00 ( 0.00%) 26195.76 ( 60.03%) alltests-1100 16330.11 ( 0.00%) 26133.46 ( 60.03%) alltests-1200 16341.30 ( 0.00%) 26084.03 ( 59.62%) alltests-1300 16304.75 ( 0.00%) 26024.74 ( 59.61%) alltests-1400 16231.08 ( 0.00%) 25952.35 ( 59.89%) alltests-1500 16168.06 ( 0.00%) 25850.58 ( 59.89%) alltests-1600 16142.56 ( 0.00%) 25767.42 ( 59.62%) alltests-1700 16118.91 ( 0.00%) 25689.58 ( 59.38%) alltests-1800 16068.06 ( 0.00%) 25599.71 ( 59.32%) alltests-1900 16046.94 ( 0.00%) 25525.92 ( 59.07%) alltests-2000 16007.26 ( 0.00%) 25513.07 ( 59.38%) disk-100 7582.14 ( 0.00%) 7257.48 ( -4.28%) disk-200 6962.44 ( 0.00%) 7109.15 ( 2.11%) disk-300 6435.93 ( 0.00%) 6904.75 ( 7.28%) disk-400 6370.84 ( 0.00%) 6861.26 ( 7.70%) disk-500 6353.42 ( 0.00%) 6846.71 ( 7.76%) disk-600 6368.82 ( 0.00%) 6806.75 ( 6.88%) disk-700 6331.37 ( 0.00%) 6796.01 ( 7.34%) disk-800 6324.22 ( 0.00%) 6788.00 ( 7.33%) disk-900 6253.52 ( 0.00%) 6750.43 ( 7.95%) disk-1000 6242.53 ( 0.00%) 6855.11 ( 9.81%) disk-1100 6234.75 ( 0.00%) 6858.47 ( 10.00%) disk-1200 6312.76 ( 0.00%) 6845.13 ( 8.43%) disk-1300 6309.95 ( 0.00%) 6834.51 ( 8.31%) disk-1400 6171.76 ( 0.00%) 6787.09 ( 9.97%) disk-1500 6139.81 ( 0.00%) 6761.09 ( 10.12%) disk-1600 4807.12 ( 0.00%) 6725.33 ( 39.90%) disk-1700 4669.50 ( 0.00%) 5985.38 ( 28.18%) disk-1800 4663.51 ( 0.00%) 5972.99 ( 28.08%) disk-1900 4674.31 ( 0.00%) 5949.94 ( 27.29%) disk-2000 4668.36 ( 0.00%) 5834.93 ( 24.99%) In addition, a 67.5% increase in successfully migrated NUMA pages, thus improving node locality. The patch layout is simple but designed for bisection (in case reversion is needed if the changes break upstream) and easier review: o Patches 1-4 convert the i_mmap lock from mutex to rwsem. o Patches 5-10 share the lock in specific paths, each patch details the rationale behind why it should be safe. This patchset has been tested with: postgres 9.4 (with brand new hugetlb support), hugetlbfs test suite (all tests pass, in fact more tests pass with these changes than with an upstream kernel), ltp, aim7 benchmarks, memcached and iozone with the -B option for mmap'ing. *Untested* paths are nommu, memory-failure, uprobes and xip. This patch (of 8): Various parts of the kernel acquire and release this mutex, so add i_mmap_lock_write() and immap_unlock_write() helper functions that will encapsulate this logic. The next patch will make use of these. Signed-off-by: -
Xiubo Li authored
My current email address will be gone shortly, update my email to be a gmail one. Signed-off-by:
Xiubo Li <Li.Xiubo@freescale.com> Cc: Timur Tabi <timur@tabi.org> Cc: Takashi Iwai <tiwai@suse.de> Acked-by:
Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by:
-
Guenter Roeck authored
Commit 7654e9d4 ("drivers/rtc/rtc-snvs: fix suspend/resume") replaces SIMPLE_DEV_PM_OPS with direct declaration of snvs_rtc_pm_ops, but does so outside #ifdef CONFIG_PM_SLEEP. This causes the driver build to fail if CONFIG_PM_SLEEP is not configured. Fixes: 7654e9d4 ("drivers/rtc/rtc-snvs: fix suspend/resume") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Cc: Sanchayan Maity <maitysanchayan@gmail.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by:
-
- 12 Dec, 2014 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linuxLinus Torvalds authored
Pull pstore update #2 from Tony Luck: "Couple of pstore-ram enhancements to allow use of different memory attributes" * tag 'please-pull-morepstore' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore-ram: Allow optional mapping with pgprot_noncached pstore-ram: Fix hangs by using write-combine mappings
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs update from Chris Mason: "From a feature point of view, most of the code here comes from Miao Xie and others at Fujitsu to implement scrubbing and replacing devices on raid56. This has been in development for a while, and it's a big improvement. Filipe and Josef have a great assortment of fixes, many of which solve problems corruptions either after a crash or in error conditions. I still have a round two from Filipe for next week that solves corruptions with discard and block group removal" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits) Btrfs: make get_caching_control unconditionally return the ctl Btrfs: fix unprotected deletion from pending_chunks list Btrfs: fix fs mapping extent map leak Btrfs: fix memory leak after block remove + trimming Btrfs: make btrfs_abort_transaction consider existence of new block groups Btrfs: fix race between writing free space cache and trimming Btrfs: fix race between fs trimming and block group remove/allocation Btrfs, replace: enable dev-replace for raid56 Btrfs: fix freeing used extents after removing empty block group Btrfs: fix crash caused by block group removal Btrfs: fix invalid block group rbtree access after bg is removed Btrfs, raid56: fix use-after-free problem in the final device replace procedure on raid56 Btrfs, replace: write raid56 parity into the replace target device Btrfs, replace: write dirty pages into the replace target device Btrfs, raid56: support parity scrub on raid56 Btrfs, raid56: use a variant to record the operation type Btrfs, scrub: repair the common data on RAID5/6 if it is corrupted Btrfs, raid56: don't change bbio and raid_map Btrfs: remove unnecessary code of stripe_index assignment in __btrfs_map_block Btrfs: remove noused bbio_ret in __btrfs_map_block in condition ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - i2c-hid race condition fix from Jean-Baptiste Maneyrol - Logitech driver now supports vendor-specific HID++ protocol, allowing us to deliver a full multitouch support on wider range of Logitech touchpads. Written by Benjamin Tissoires - MS Surface Pro 3 Type Cover support added by Alan Wu - RMI touchpad support improvements from Andrew Duggan - a lot of updates to Wacom driver from Jason Gerecke and Ping Cheng - various small fixes all over the place * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (56 commits) HID: rmi: The address of query8 must be calculated based on which query registers are present HID: rmi: Check for additional ACM registers appended to F11 data report HID: i2c-hid: prevent buffer overflow in early IRQ HID: logitech-hidpp: disable io in probe error path HID: logitech-hidpp: add boundary check for name retrieval HID: logitech-hidpp: check name retrieval return code HID: logitech-hidpp: do not return the name length HID: wacom: Report input events for each finger on generic devices HID: wacom: Initialize MT slots for generic devices at post_parse_hid HID: wacom: Update maximum X/Y accounding to outbound offset HID: wacom: Add support for DTU-1031X HID: wacom: add defines for new Cintiq and DTU outbound tracking HID: wacom: fix freeze on open when autosuspend is on HID: wacom: re-add accidentally dropped Lenovo PID HID: make hid_report_len as a static inline function in hid.h HID: wacom: Consult the application usage when determining field type HID: wacom: PAD is independent with pen/touch HID: multitouch: Add quirk for VTL touch panels HID: i2c-hid: fix race condition reading reports HID: wacom: Add angular resolution data to some ABS axes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
-
