Skip to content

L
linux
Switch branch/tag
  1. 19 Nov, 2014 3 commits
  3. 18 Nov, 2014 4 commits
    • Fabio K's avatar
      Bluetooth: Add support for Broadcom BCM20702A1 variant · a86c02ea
      Fabio K authored 
      This variant requires the flag BTUSB_BCM_PATCHRAM to work.

Relevant details from /sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3404 Rev= 1.12
S:  Manufacturer=Broadcom Corp
S:  Product=BCM20702A0
S:  SerialNumber=240A646F1XXX
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS=  32 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  32 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none)

The firmware was extracted from a Windows 8.1 64-bit installation
and converted from 'hex' to 'hcd' for use in Linux.

Under Windows it also identifies itself as BCM20702A0,
but the firmware is named "BCM20702A1_001.002.014.1315.1356.hex"
and is located in "%SYSTEMROOT%\system32\drivers\"
(md5 67cf6bfdae61c4bb819a66da984f7913)
(sha1 5f74cc6a9a3bf19ee0f8c3d01e4be34c609b188f)

The same firmware file is also available as a download at
http://www.asrock.com/mb/Intel/Z87E-ITX/?cat=Download&os=All
marked as "Bluetooth driver ver:12.0.0.7820"

'hcd' file should be placed at "brcm/BCM20702A0-13d3-3404.hcd"
inside the firmware directory (e.g. "/lib/firmware")
Signed-off-by: default avatarFabio K <healthkit@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      a86c02ea
    • Johan Hedberg's avatar
      Bluetooth: Call drain_workqueue() before resetting state · 76727c02
      Johan Hedberg authored 
      Doing things like hci_conn_hash_flush() while holding the hdev lock is
risky since its synchronous pending work cancellation could cause the
L2CAP layer to try to reacquire the hdev lock. Right now there doesn't
seem to be any obvious places where this would for certain happen but
it's already enough to cause lockdep to start warning against the hdev
and the work struct locks being taken in the "wrong" order:

[  +0.000373] mgmt-tester/1603 is trying to acquire lock:
[  +0.000292]  ((&conn->pending_rx_work)){+.+.+.}, at: [<c104266d>] flush_work+0x0/0x181
[  +0.000270]
but task is already holding lock:
[  +0.000000]  (&hdev->lock){+.+.+.}, at: [<c13b9a80>] hci_dev_do_close+0x166/0x359
[  +0.000000]
which lock already depends on the new lock.

[  +0.000000]
the existing dependency chain (in reverse order) is:
[  +0.000000]
-> #1 (&hdev->lock){+.+.+.}:
[  +0.000000]        [<c105ea8f>] lock_acquire+0xe3/0x156
[  +0.000000]        [<c140c663>] mutex_lock_nested+0x54/0x375
[  +0.000000]        [<c13d644b>] l2cap_recv_frame+0x293/0x1a9c
[  +0.000000]        [<c13d7ca4>] process_pending_rx+0x50/0x5e
[  +0.000000]        [<c1041a3f>] process_one_work+0x21c/0x436
[  +0.000000]        [<c1041e3d>] worker_thread+0x1be/0x251
[  +0.000000]        [<c1045a22>] kthread+0x94/0x99
[  +0.000000]        [<c140f801>] ret_from_kernel_thread+0x21/0x30
[  +0.000000]
-> #0 ((&conn->pending_rx_work)){+.+.+.}:
[  +0.000000]        [<c105e158>] __lock_acquire+0xa07/0xc89
[  +0.000000]        [<c105ea8f>] lock_acquire+0xe3/0x156
[  +0.000000]        [<c1042696>] flush_work+0x29/0x181
[  +0.000000]        [<c1042864>] __cancel_work_timer+0x76/0x8f
[  +0.000000]        [<c104288c>] cancel_work_sync+0xf/0x11
[  +0.000000]        [<c13d4c18>] l2cap_conn_del+0x72/0x183
[  +0.000000]        [<c13d8953>] l2cap_disconn_cfm+0x49/0x55
[  +0.000000]        [<c13be37a>] hci_conn_hash_flush+0x7a/0xc3
[  +0.000000]        [<c13b9af6>] hci_dev_do_close+0x1dc/0x359
[  +0.012038]        [<c13bbe38>] hci_unregister_dev+0x6e/0x1a3
[  +0.000000]        [<c12d33c1>] vhci_release+0x28/0x47
[  +0.000000]        [<c10dd6a9>] __fput+0xd6/0x154
[  +0.000000]        [<c10dd757>] ____fput+0xd/0xf
[  +0.000000]        [<c1044bb2>] task_work_run+0x6b/0x8d
[  +0.000000]        [<c1001bd2>] do_notify_resume+0x3c/0x3f
[  +0.000000]        [<c140fa70>] work_notifysig+0x29/0x31
[  +0.000000]
other info that might help us debug this:

[  +0.000000]  Possible unsafe locking scenario:

[  +0.000000]        CPU0                    CPU1
[  +0.000000]        ----                    ----
[  +0.000000]   lock(&hdev->lock);
[  +0.000000]                                lock((&conn->pending_rx_work));
[  +0.000000]                                lock(&hdev->lock);
[  +0.000000]   lock((&conn->pending_rx_work));
[  +0.000000]
 *** DEADLOCK ***

Fully fixing this would require some quite heavy refactoring to change
how the hdev lock and hci_conn instances are handled together. A simpler
solution for now which this patch takes is to try ensure that the hdev
workqueue is empty before proceeding with the various cleanup calls,
including hci_conn_hash_flush().
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      76727c02
    • Johan Hedberg's avatar
      Bluetooth: Use shorter "rand" name for "randomizer" · 38da1703
      Johan Hedberg authored 
      The common short form of "randomizer" is "rand" in many places
(including the Bluetooth specification). The shorter version also makes
for easier to read code with less forced line breaks. This patch renames
all occurences of "randomizer" to "rand" in the Bluetooth subsystem
code.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      38da1703
    • Johan Hedberg's avatar
      Bluetooth: Fix BR/EDR-only address checks for remote OOB data · c19a495c
      Johan Hedberg authored 
      For now the mgmt commands dealing with remote OOB data are strictly
BR/EDR-only. This patch fixes missing checks for the passed address type
so that any non-BR/EDR value triggers the appropriate error response.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      c19a495c
  5. 17 Nov, 2014 13 commits
  7. 15 Nov, 2014 9 commits
  9. 13 Nov, 2014 6 commits
    • Johan Hedberg's avatar
      Bluetooth: Fix correct nesting for 6lowpan server channel · 2773b024
      Johan Hedberg authored 
      Server channels in BT_LISTEN state should use L2CAP_NESTING_PARENT. This
patch fixes the nesting value for the 6lowpan channel.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      2773b024
    • Johan Hedberg's avatar
      Bluetooth: Fix L2CAP nesting level initialization location · ff714119
      Johan Hedberg authored 
      There's no reason why all users of L2CAP would need to worry about
initializing chan->nesting to L2CAP_NESTING_NORMAL (which is important
since 0 is the same as NESTING_SMP). This patch moves the initialization
to the common place that's used to create all new channels, i.e. the
l2cap_chan_create() function.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      ff714119
    • Johan Hedberg's avatar
      Bluetooth: Fix L2CAP socket lock nesting level · 3b2ab39e
      Johan Hedberg authored 
      The teardown callback for L2CAP channels is problematic in that it is
explicitly called for all types of channels from l2cap_chan_del(),
meaning it's not possible to hard-code a nesting level when taking the
socket lock. The simplest way to have a correct nesting level for the
socket locking is to use the same value as for the chan. This also means
that the other places trying to lock parent sockets need to be update to
use the chan value (since L2CAP_NESTING_PARENT is defined as 2 whereas
SINGLE_DEPTH_NESTING has the value 1).
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      3b2ab39e
    • Johan Hedberg's avatar
      Bluetooth: Use proper nesting annotation for l2cap_chan lock · abe84903
      Johan Hedberg authored 
      By default lockdep considers all L2CAP channels equal. This would mean
that we get warnings if a channel is locked when another one's lock is
tried to be acquired in the same thread. This kind of inter-channel
locking dependencies exist in the form of parent-child channels as well
as any channel wishing to elevate the security by requesting procedures
on the SMP channel.

To eliminate the chance for these lockdep warnings we introduce a
nesting level for each channel and use that when acquiring the channel
lock. For now there exists the earlier mentioned three identified
categories: SMP, "normal" channels and parent channels (i.e. those in
BT_LISTEN state). The nesting level is defined as atomic_t since we need
access to it before the lock is actually acquired.
Signed-off-by: default avatarJohan Hedberg <johan.hedberg@intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      abe84903
    • Alexander Aring's avatar
      at86rf230: remove interframe spacing time workaround · 24ccb9f4
      Alexander Aring authored 
      This patch removes the interframe spacing time workaround from at86rf230
driver and use the mac802154 one. The interframe spacing time differs at
at86rf212 and channel setting. This patch fix this handling which is also
a new workaround and should be moved into mac802154 while channel
setting.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      24ccb9f4
    • Alexander Aring's avatar
      mac802154: add interframe spacing time handling · 61f2dcba
      Alexander Aring authored 
      This patch adds a new interframe spacing time handling into mac802154
layer. Interframe spacing time is a time period between each transmit.
This patch adds a high resolution timer into mac802154 and starts on
xmit complete with corresponding interframe spacing expire time if
ifs_handling is true. We make it variable because it depends if
interframe spacing time is handled by transceiver or mac802154. At the
timer complete function we wake the netdev queue again. This avoids
new frame transmit in range of interframe spacing time.

For synced driver we add no handling of interframe spacing time. This
is currently a lack of support in all synced xmit drivers. I suppose
it's working because the latency of workqueue which is needed to call
spi_sync.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
      61f2dcba
  11. 12 Nov, 2014 5 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7