- 24 May, 2008 31 commits
-
-
Arjan van de Ven authored
enable_irq_wake() and disable_irq_wake() need to be balanced. However, serial_core.c calls these for different conditions during the suspend and resume functions... This is causing a regular WARN_ON() as found at http://www.kerneloops.org/search.php?search=set_irq_wake This patch makes the conditions for triggering the _wake enable/disable sequence identical. Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Denis V. Lunev authored
Any file under /proc/net opened more than once leaked the refcounter on the module it belongs to. The problem is that module_get is called for each file opening while module_put is called only when /proc inode is destroyed. So, lets put module counter if we are dealing with already initialised inode. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10737Signed-off-by:
Denis V. Lunev <den@openvz.org> Cc: David Miller <davem@davemloft.net> Cc: Patrick McHardy <kaber@trash.net> Acked-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
Robert Olsson <robert.olsson@its.uu.se> Acked-by:
Eric W. Biederman <ebiederm@xmission.com> Reported-by:
Roland Kletzing <devzero@web.de> Signed-off-by:
-
Marcin Krol authored
In 2.6.25, ramdisk devices show up in /proc/partitions, which is a behaviour change from the old rd.c. Add GENHD_FL_SUPPRESS_PARTITION_INFO, which was present in rd.c. All kernels prior to 2.6.25 weren't displaying ramdisks in /proc/partitions. Since there are many userspace tools using information from /proc/partitions some of them may now behave incorrectly (I didn't tested any though). For example before 2.6.25 /proc/partitions was empty if no block devices like hard disks and such were detected by kernel. Now all 16 ramdisks are always visible there. Some software may rely on such information (I mean, on empty /proc/partitions). There was quite similar situation back in 2004, and ramdisks were excluded back from displaying. Thats why I called this a regression (maybe a bit unfortunate). See this patch for info: http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc2/2.6.3-rc2-mm1/broken-out/nbd-proc-partitions-fix.patch I also think that someone somewhere (long time ago) excluded ramdisks from /proc/partitions for good reasons. It is possible that now such new "feature" is harmless, but I think there are more chances that someone will say "hey, /proc/partitions has changed, now my software doesn't work" then "hey where did my new 2.6.25 feature go". nbd devices are also excluded, maybe for very same (unknown to me) reasons. Signed-off-by:
Marcin Krol <hawk@pld-linux.org> Signed-off-by:
Nick Piggin <npiggin@suse.de> Cc: <stable@kernel.org> Signed-off-by:
-
Alan Cox authored
This doesn't need to be two modules, and making it one cleans up the problem Signed-off-by:
Alan Cox <alan@redhat.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Trent Piepho authored
The last gpio belonging to a chip is chip->base + chip->ngpios - 1. Some places in the code, but not all, forgot the critical minus one. Signed-off-by:
Trent Piepho <xyzzy@speakeasy.org> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Roel Kluin authored
The return value of mcp23s08_read_regs() can only be evaluated when signed Signed-off-by:
Roel Kluin <12o3l@tiscali.nl> Signed-off-by:
-
David Brownell authored
Teach drivers/gpio/pca953x.c about PCA9554, another compatible chip. Signed-off-by:
-
Oleg Nesterov authored
__exit_signal() does flush_sigqueue(tsk->pending) outside of ->siglock. This can race with another thread doing sigqueue_free(), we can free the same SIGQUEUE_PREALLOC sigqueue twice or corrupt the pending->list. Note that even sys_exit_group() can trigger this race, not only sys_timer_delete(). Move the callsite of flush_sigqueue(tsk->pending) under ->siglock. This patch doesn't touch flush_sigqueue(->shared_pending) below, it is called when there are no other threads which can play with signals, and sigqueue_free() can't be used outside of our thread group. Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Roland McGrath <roland@redhat.com> Signed-off-by:
-
NeilBrown authored
When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" <ivan@kasenna.com> Signed-off-by:Neil Brown <neilb@suse.de> Signed-off-by:
-
Bernd Schubert authored
In some configurations, a raid6 resync can be limited by CPU speed (Calculating P and Q and moving data) rather than by device speed. In these cases there is nothing to be gained byt serialising resync of arrays that share a device, and doing the resync in parallel can provide benefit. So add a sysfs tunable to flag an array as being allowed to resync in parallel with other arrays that use (a different part of) the same device. Signed-off-by:
Bernd Schubert <bs@q-leap.de> Signed-off-by:
-
Dan Williams authored
This additional notification to 'array_state' is needed to allow the monitor application to learn about stop events via sysfs. The sysfs_notify("sync_action") call that comes at the end of do_md_stop() (via md_new_event) is insufficient since the 'sync_action' attribute has been removed by this point. (Seems like a sysfs-notify-on-removal patch is a better fix. Currently removal updates the event count but does not wake up waiters) Signed-off-by:Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
NeilBrown authored
When an array enters write pending, 'array_state' changes, so we must be sure to sysfs_notify. Also, when waiting for user-space to acknowledge 'write-pending' by marking the metadata as dirty, we don't want to wait for MD_CHANGE_DEVS to be cleared as that might not happen. So explicity test for the bits that we are really interested in. Signed-off-by:
-
NeilBrown authored
When performing a "recovery" or "check" pass on a RAID1 array, we read from each device and possible, if there is a difference or a read error, write back to some devices. We use the same 'bio' for both read and write, resetting various fields between the two operations. We forgot to reset bv_offset and bv_len however. These are often left unchanged, but in the case where there is an IO error one or two sectors into a page, they are changed. This results in correctable errors not being corrected properly. It does not result in any data corruption. Cc: "Fairbanks, David" <David.Fairbanks@stratus.com> Signed-off-by:
-
Bernd Schubert authored
Last night we had scsi problems and a hardware raid unit was offlined during heavy i/o. While this happened we got for about 3 minutes a huge number messages like these Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2). I guess the high error rate is responsible for not scheduling other events - during this time the system was not pingable and in the end also other devices run into scsi command timeouts causing problems on these unrelated devices as well. Signed-off-by:
Bernd Schubert <bernd-schubert@gmx.de> Signed-off-by:
-
Christoph Hellwig authored
Kill the trivial and rather pointless file_path wrapper around d_path. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Adrian Bunk authored
This patch adds a proper extern for mdp_major in include/linux/raid/md.h Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
-
NeilBrown authored
It is possible to add a write-intent bitmap to an active array, or remove the bitmap that is there. When we do with the 'quiesce' the array, which causes make_request to block in "wait_barrier()". However we are sampling the value of "mddev->bitmap" before the wait_barrier call, and using it afterwards. This can result in using a bitmap structure that has been freed. Signed-off-by:
-
Alan Cox authored
The atomic_t type is 32bit but a 64bit system can have more than 2^32 pages of virtual address space available. Without this we overflow on ludicrously large mappings Signed-off-by:
-
maximilian attems authored
<linux/types.h> can't be used together with <sys/ustat.h> because they both define struct ustat: $ cat test.c #include <sys/ustat.h> #include <linux/types.h> $ gcc -c test.c In file included from test.c:2: /usr/include/linux/types.h:165: error: redefinition of 'struct ustat' has been reported a while ago to debian, but seems to have been lost in cat fighting: http://bugs.debian.org/429064Signed-off-by:maximilian attems <max@stro.at> Cc: <stable@kernel.org> Signed-off-by:
-
Ignacio García Pérez authored
Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by:
Ignacio García Pérez <iggarpe@t2i.com> Signed-off-by:
-
Mariusz Kozlowski authored
Parenthesis fix in include/asm-mips/mach-au1x00/au1000.h Signed-off-by:
Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Mariusz Kozlowski authored
Parenthesis fix in include/asm-mips/gic.h Signed-off-by:
-
Darrick J. Wong authored
This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
Darrick J. Wong authored
Minor rework to support the Intel 5400 chipset. Signed-off-by:
-
Gabor Czigola authored
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jiri Kosina <jikos@jikos.cz> Signed-off-by:
-
Marcin Slusarz authored
replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by:
Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Johannes Weiner authored
In a zone's present pages number, account for all pages occupied by the memory map, including a partial. Signed-off-by:
Johannes Weiner <hannes@saeurebad.de> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Karel Zak authored
(akpm: we often deal with util-linux and I (at least) can never remember where they hang out). Signed-off-by:
Karel Zak <kzak@redhat.com> Signed-off-by:
-
Cyrill Gorcunov authored
Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Miklos Szeredi authored
Fuse allocates a separate bdi for each filesystem, and registers them in sysfs with "MAJOR:MINOR" of sb->s_dev (st_dev). This works fine for anon devices normally used by fuse, but can conflict with an already registered BDI for "fuseblk" filesystems, where sb->s_dev represents a real block device. In particularl this happens if a non-partitioned device is being mounted. Fix by registering with a different name for "fuseblk" filesystems. Thanks to Ioan Ionita for the bug report. Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Reported-by:
Ioan Ionita <opslynx@gmail.com> Tested-by:
-
Nick Piggin authored
Take out an assertion to allow ->fault handlers to service PFNMAP regions. This is required to reimplement .nopfn handlers with .fault handlers and subsequently remove nopfn. Signed-off-by:
Jes Sorensen <jes@sgi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
- 23 May, 2008 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infinibandLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED IPoIB: Test for NULL broadcast object in ipiob_mcast_join_finish() MAINTAINERS: Add cxgb3 and iw_cxgb3 NIC and iWARP driver entries IB/mlx4: Fix creation of kernel QP with max number of send s/g entries IB/mthca: Fix max_sge value returned by query_device RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send() IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send() IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediate IB/ipath: Fix printk format for ipath_sdma_status
-
Dave Olson authored
If a low-level driver returns IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED, handle_outgoing_dr_smp() doesn't clean up properly. The fix is to kfree the local data and break, rather than falling through. This was observed with the ipath driver, but could happen with any driver. This fixes <https://bugs.openfabrics.org/show_bug.cgi?id=1027>. Signed-off-by:
Dave Olson <dave.olson@qlogic.com> Signed-off-by:
Roland Dreier <rolandd@cisco.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreqLinus Torvalds authored
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] clarify license of freq_table.c [CPUFREQ] Remove documentation of removed ondemand tunable. [CPUFREQ] Crusoe: longrun cpufreq module reports false min freq [CPUFREQ] powernow-k8: improve error messages
-
Jesse Barnes authored
Not sure how this snuck upstream, but it really doesn't belong there. We don't need a KERN_ERR printk in the suspend path to know what's going on (at least not anymore). Signed-off-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpcLinus Torvalds authored
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] iSeries: Remove unused mail address [POWERPC] mpic: Fix use of uninitialized variable [POWERPC] Add kernstart_addr to list of allowed symbols in prom_init [POWERPC] Fix __set_fixmap() for STRICT_MM_TYPECHECKS [POWERPC] PS3: Fix memory hotplug
-
git://oss.sgi.com:8090/xfs/xfs-2.6Linus Torvalds authored
* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: [XFS] Fix memory corruption with small buffer reads [XFS] Fix inode list allocation size in writeback. [XFS] Don't allow memory reclaim to wait on the filesystem in inode [XFS] Fix fsync() b0rkage. [XFS] Include linux/random.h in all builds, not just debug builds.
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: stop_machine: make stop_machine_run more virtualization friendly doc: add a chapter about trylock functions [Bug 9011] modules: proper cleanup of kobject without CONFIG_SYSFS module loading ELF handling: use SELFMAG instead of numeric constant
-
Harvey Harrison authored
drivers/video/aty/atyfb_base.c:3359:26: warning: Using plain integer as NULL pointer drivers/video/aty/radeon_base.c:2280:32: warning: Using plain integer as NULL pointer drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer drivers/video/sis/sis_main.c:5790:44: warning: Using plain integer as NULL pointer Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Harvey Harrison authored
drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer Signed-off-by:
-
