This simplifies the irqflags support by switching over to the asm-generic
version. The necessary support functions are brought out-of-line for both
SHcompact and SHmedia instruction sets.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This code was added for some ancient SH-4 solution engines with peculiar
boot ROMs that did silly things to the UBC MSTP bits. None of these have
been in the wild for years, and these days the clock framework wraps up
the MSTP bits, meaning that the UBC code is one of the few interfaces
that is stomping MSTP bits underneath the clock framework. At this point
the risks far outweigh any benefit this code provided, so just kill it
off.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:
	arch/sh/Kconfig

This seems to have popped back in via some merge damage. Kill it off.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This enables SCHED_MC support for SH-X3 multi-cores. Presently this is
just a simple wrapper around the possible map, but this allows for
tying in support for some of the more exotic NUMA clusters where we can
actually do something with the topology.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

In the case where need_resched() is set in between the cpu_idle() and
pm_idle() calls we were missing an else case for just re-enabling local
IRQs and bailing out. This was noticed by the irqs_disabled() warning,
even though IRQs were being re-enabled elsewhere.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This follows the x86 change and moves check_pgt_cache() up under the
!need_resched() tight loop, rather than simply calling in to it when
exiting idle.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

This does a bit of chainsawing of the idle loop code to get light sleep
working on SMP. Previously this was forcing secondary CPUs in to sleep
mode with them not coming back if they didn't have their own local
timers. Given that we use clockevents broadcasting by default, the CPU
managing the clockevents can't have IRQs disabled before entering its
sleep state.

This unfortunately leaves us with the age-old need_resched() race in
between local_irq_enable() and cpu_sleep(), but at present this is
unavoidable. After some more experimentation it may be possible to layer
on SR.BL bit manipulation over top of this scheme to inhibit the race
condition, but given the current potential for missing wakeups, this is
left as a future exercise.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

All of the secondary CPUs are forced in to light sleep mode, but we were
missing the same initialization for the boot CPU. This resulted in
inconsistent sleep modes depending on which CPU we were on, confusing the
idle loop when not polling.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Conflicts:
	arch/sh/mm/cache-sh4.c

The open function got the BKL via the big push down. Replace it by
preempt_enable/disable as this is sufficient for an UP machine.

The ioctl can be unlocked because there is no functionality which
requires serialization. The usage by multiple callers is broken with
and without the BKL due to the local static variable addr.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Add code to handle the cache disabled case. Fixes breakage introduced by
37443ef3 ("sh: Migrate SH-4 cacheflush
ops to function pointers."). Without this patch configuring caches off
with CONFIG_CACHE_OFF=y makes kfr2r09 and migo-r lock up in fbdev
deferred io or early user space.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

Presently The SH-4 cache flushing code uses flush_cache_4096() for most
of the real flushing work, which breaks down to a fixed 4096 unroll and
increment. Not only is this sub-optimal for larger page sizes, it's also
uncovered a bug in sh4_flush_dcache_page() when large page sizes are used
and we have no cache aliases -- resulting in only a part of the page's
D-cache lines being written back.
Signed-off-by: Valentin Sitdikov <valentin.sitdikov@siemens.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Update flex_arrays.txt

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix socket fd translation
  dlm: fix lowcomms_connect_node for sctp

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "x86: linker script syntax nits"
  x86, perf_event: Rename 'performance counter interrupt'

The destination keyring specified to request_key() and co. is made available to
the process that instantiates the key (the slave process started by
/sbin/request-key typically).  This is passed in the request_key_auth struct as
the dest_keyring member.

keyctl_instantiate_key and keyctl_negate_key() call get_instantiation_keyring()
to get the keyring to attach the newly constructed key to at the end of
instantiation.  This may be given a specific keyring into which a link will be
made later, or it may be asked to find the keyring passed to request_key().  In
the former case, it returns a keyring with the refcount incremented by
lookup_user_key(); in the latter case, it returns the keyring from the
request_key_auth struct - and does _not_ increment the refcount.

The latter case will eventually result in an oops when the keyring prematurely
runs out of references and gets destroyed.  The effect may take some time to
show up as the key is destroyed lazily.

To fix this, the keyring returned by get_instantiation_keyring() must always
have its refcount incremented, no matter where it comes from.

This can be tested by setting /etc/request-key.conf to:

#OP	TYPE	DESCRIPTION	CALLOUT INFO	PROGRAM ARG1 ARG2 ARG3 ...
#======	=======	===============	===============	===============================
create  *	test:*		*		|/bin/false %u %g %d %{user:_display}
negate	*	*		*		/bin/keyctl negate %k 10 @u

and then doing:

	keyctl add user _display aaaaaaaa @u
        while keyctl request2 user test:x test:x @u &&
        keyctl list @u;
        do
                keyctl request2 user test:x test:x @u;
                sleep 31;
                keyctl list @u;
        done

which will oops eventually.  Changing the negate line to have @u rather than
%S at the end is important as that forces the latter case by passing a special
keyring ID rather than an actual keyring ID.
Reported-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Alexander Zangerl <az@bond.edu.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Fix MODPOST warning
  powerpc/oprofile: Add ppc750 CL as supported by oprofile
  powerpc: warning: allocated section `.data_nosave' not in segment
  powerpc/kgdb: Fix build failure caused by "kgdb.c: unused variable 'acc'"
  powerpc: Fix hypervisor TLB batching
  powerpc/mm: Fix hang accessing top of vmalloc space
  powerpc: Fix memory leak in axon_msi.c
  powerpc/pmac: Fix issues with sleep on some powerbooks
  powerpc64/ftrace: use PACA to retrieve TOC in mod_return_to_handler
  powerpc/ftrace: show real return addresses in modules

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI button: don't try to use a non-existent lid device
  ACPI: video: Loosen strictness of video bus detection code
  eeepc-laptop: Prevent a panic when disabling RT2860 wireless when associated
  eeepc-laptop: Properly annote eeepc_enable_camera().
  ACPI / PCI: Fix NULL pointer dereference in acpi_get_pci_dev() (rev. 2)
  fujitsu-laptop: address missed led-class ifdef fixup
  ACPI: Kconfig, fix proc aggregator text
  ACPI: add AC/DC notifier

Merge branch 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6:
  OMAP2xxx clock: set up clockdomain pointer in struct clk
  OMAP: Fix race condition with autodeps
  omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
  omap: Initialization of SDRC params on Zoom2
  omap: RX-51: Drop I2C-1 speed to 2200
  omap: SDMA: Fixing bug in omap_dma_set_global_params()
  omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: always pin metadata in discard mode
  Btrfs: enable discard support
  Btrfs: add -o discard option
  Btrfs: properly wait log writers during log sync
  Btrfs: fix possible ENOSPC problems with truncate
  Btrfs: fix btrfs acl #ifdef checks
  Btrfs: streamline tree-log btree block writeout
  Btrfs: avoid tree log commit when there are no changes
  Btrfs: only write one super copy during fsync

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty: fix vt_compat_ioctl

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  sysfs: Allow sysfs_notify_dirent to be called from interrupt context.
  sysfs: Allow sysfs_move_dir(..., NULL) again.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: Fix EEM driver comments and VID/PID
  usb-storage: Workaround devices with bogus sense size
  USB: ehci: Fix IST boundary checking interval math.
  USB: option: Support for AIRPLUS MCD650 Datacard
  USB: whci-hcd: always do an update after processing a halted qTD
  USB: whci-hcd: handle early deletion of endpoints
  USB: wusb: don't use the stack to read security descriptor
  USB: rename Documentation/ABI/.../sysfs-class-usb_host

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: rt2860sta: prevent a panic when disabling when associated
  staging: more sched.h fixes
  Staging: et131x: Fix the add_10bit macro
  Staging: et131x: Correct WRAP bit handling
  staging: Complete sched.h removal from interrupt.h
  Staging: vme: fix sched.h build breakage
  Staging: poch: fix sched.h build breakage
  Staging: b3dfg: fix sched.h build breakage
  Staging: comedi: fix sched.h build breakage
  Staging: iio: Fix missing include <linux/sched.h>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits)
  vmxnet: fix 2 build problems
  net: add support for STMicroelectronics Ethernet controllers.
  net: ks8851_mll uses mii interfaces
  net/fec_mpc52xx: Fix kernel panic on FEC error
  net: Fix OF platform drivers coldplug/hotplug when compiled as modules
  TI DaVinci EMAC: Clear statistics register properly.
  r8169: partial support and phy init for the 8168d
  irda/sa1100_ir: check return value of startup hook
  udp: Fix udp_poll() and ioctl()
  WAN: fix Cisco HDLC handshaking.
  tcp: fix tcp_defer_accept to consider the timeout
  3c574_cs: spin_lock the set_multicast_list function
  net: Teach pegasus driver to ignore bluetoother adapters with clashing Vendor:Product IDs
  netxen: fix pci bar mapping
  ethoc: fix warning from 32bit build
  libertas: fix build
  net: VMware virtual Ethernet NIC driver: vmxnet3
  net: Fix IXP 2000 network driver building.
  libertas: fix build
  mac80211: document ieee80211_rx() context requirement
  ...

* branch 'tty-fixes'
  tty: use the new 'flush_delayed_work()' helper to do ldisc flush
  workqueue: add 'flush_delayed_work()' to run and wait for delayed work
  tty: Make flush_to_ldisc() locking more robust

The 2.6.32 merge window brought a number of changes to the flexible array
API; this patch updates the documentation to match the new state of
affairs.
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

This reverts commit e9a63a4e.

This breaks older binutils, where sink-less asserts are broken.

See this commit for further details:

  d2ba8b21: x86: Fix assert syntax in vmlinux.lds.S
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <4AD6523D.5030909@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: pull in latest, to be able to revert a patch there.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

vmxnet3 uses in_dev* interfaces so it should depend on INET.
Also fix so that the driver builds when CONFIG_PCI_MSI is disabled.

vmxnet3_drv.c:(.text+0x2a88cb): undefined reference to `in_dev_finish_destroy'

drivers/net/vmxnet3/vmxnet3_drv.c:1335: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:1384: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2137: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
drivers/net/vmxnet3/vmxnet3_drv.c:2138: error: 'struct vmxnet3_intr' has no member named 'msix_entries'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Bhavesh davda <bhavesh@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Call compat_unimap_ioctl, not do_unimap_ioctl.

This was broken by commit e9216651.

The compat_unimap_ioctl was originally called do_unimap_ioctl in
fs/compat_ioctl.h which got moved to drivers/char/vt_ioctl.c.
In that patch, the caller was not updated and consequently called
the native handler.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

clock24xx.c is missing a omap2_init_clk_clkdm() in its
omap2_clk_init() function.  Among other bad effects, this causes the
OMAP hwmod layer to oops on boot.

Thanks to Carlos Aguiar <carlos.aguiar@indt.org.br> and Stefano
Panella <Stefano.Panella@csr.com> for reporting this bug.  Thanks to Tony
Lindgren <tony@atomide.com> for N800 booting advice.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Carlos Aguiar <carlos.aguiar@indt.org.br>
Cc: Stefano Panella <Stefano.Panella@csr.com>
Cc: Tony Lindgren <tony@atomide.com>