- 18 Aug, 2013 38 commits
-
-
Mauro Carvalho Chehab authored
changeset 2ccf12af did a crappy job when added multi-line comment lines, violating CodingStyle. Change the comments added there to fulfill CodingStyle, and document the platform_data using Documentation/kernel-doc-nano-HOWTO.txt. Cc: Jon Arne Jørgensen <jonarne@jonarne.no> Cc: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jon Arne Jørgensen authored
This patch implements i2c_board_info.platform_data, and some options to override the default initialization table for the GM7113C and SAA7113 chips. Signed-off-by:
Jon Arne Jørgensen <jonarne@jonarne.no> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jon Arne Jørgensen authored
Most of the registers changed in saa7115_init_misc table are out of range for the gm7113c chip. The only register that's within range, don't need to be changed here. Signed-off-by:
-
Jon Arne Jørgensen authored
saa711x_set_v4lstd would toggle several bits that should not be touched when changing std. This patch fixes this. Signed-off-by:
-
Hans Verkuil authored
Simplify the code by using the new dv_timings helpers. Signed-off-by:
-
Hans Verkuil authored
Use the new blanking and frame size defines. This also fixed a bug in these drivers: they assumed that the height for interlaced formats was the field height, however height is the frame height. So the height for a field is actually bt->height / 2. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Use the new defines to calculate the full blanking and frame sizes. Signed-off-by:
Scott Jiang <scott.jiang.linux@gmail.com> Acked-by:
-
Hans Verkuil authored
It is very common to have to calculate the total width and height of the blanking and the full frame, so add a few defines that deal with that. Signed-off-by:
-
Hans Verkuil authored
Clarify that the il_vfrontporch, il_vsync and il_vbackporch fields must always be 0 for progressive formats. Signed-off-by:
-
Hans Verkuil authored
v4l2-common.c contained a bunch of dv-timings related functions. Move that to the new v4l2-dv-timings.c which is a more appropriate place for them. There aren't many drivers that do HDTV, so it is a good idea to separate common code related to that into a module of its own. Signed-off-by:
-
Hans Verkuil authored
This module makes it easy to filter valid timings from the full list of CEA and DMT timings based on the timings capabilities. Signed-off-by:
-
Hans Verkuil authored
This particular DMT timing definition was duplicated in the header. Signed-off-by:
-
Ondrej Zary authored
Move tea575x from sound/i2c/other to drivers/media/radio Includes Kconfig changes by Hans Verkuil. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Ondrej Zary authored
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it. Signed-off-by:
-
Antti Palosaari authored
Deferred probe was added in order to avoid udev vs. Kernel firmware download problems. It is not needed anymore. https://bugzilla.redhat.com/show_bug.cgi?id=827538Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
No need to access bInterfaceNumber via dvb_usb_v2 internals as driver has it already. That patch is prepare for dvb_usb_v2 deferred probe hack removal. It was added due to udev firmware loading problems, but things are fixed after that and it is not needed anymore. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
I did some tests against modulator (television signal generator) and this seems to improve sensitivity a little bit on channel I used. Used device was able to receive transmission just as weak signal as with Windows XP. Thanks to Jacek for donating his non-working device. I cannot ask he to test anymore... Reported-by:
Jacek Konieczny <jajcus@jajcus.net> Signed-off-by:
-
Katsuya Matsubara authored
The VSP1 driver allows to define the maximum number of each module such as RPF, WPF, and UDS in a platform data definition. This suppresses operations for nonexistent or unused modules. Signed-off-by:
Katsuya Matsubara <matsu@igel.co.jp> Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Acked-by:
-
Katsuya Matsubara authored
Each source entity maintains a pointer to the counterpart sink entity while an enabled link connects them. It should be managed by the setup_link callback in the media controller framework at runtime. However, enabled links which connect RPFs and WPFs that have an equivalent index number are created during initialization. This registers the pointer to a sink entity from the source entity when an enabled link is created. Signed-off-by:
-
Laurent Pinchart authored
The VSP1 is a video processing engine that includes a blender, scalers, filters and statistics computation. Configurable data path routing logic allows ordering the internal blocks in a flexible way. Due to the configurable nature of the pipeline the driver implements the media controller API and doesn't use the V4L2 mem-to-mem framework, even though the device usually operates in memory to memory mode. Only the read pixel formatters, up/down scalers, write pixel formatters and LCDC interface are supported at this stage. Signed-off-by:
-
Laurent Pinchart authored
NV16M and NV61M are planar YCbCr 4:2:2 and YCrCb 4:2:2 formats with a luma plane followed by an interleaved chroma plane. The planes are not required to be contiguous in memory, and the formats can only be used with the multi-planar formats API. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by:
-
Laurent Pinchart authored
Signed-off-by:
-
Laurent Pinchart authored
The V4L2_MBUS_FMT_YUV10_1X30 code is documented as being equal to 0x2014, while the v4l2-mediabus.h header defines it as 0x2016. Fix the documentation. Signed-off-by:
-
Laurent Pinchart authored
The vb2_fop_mmap() and vb2_fop_get_unmapped_area() functions are plug-in implementation of the mmap() and get_unmapped_area() file operations that calls vb2_mmap() and vb2_get_unmapped_area() on the queue associated with the video device. Neither the vb2_fop_mmap/vb2_fop_get_unmapped_area nor the v4l2_mmap/vb2_get_unmapped_area functions in the V4L2 core take any lock, leading to race conditions between mmap/get_unmapped_area and other buffer-related ioctls such as VIDIOC_REQBUFS. Fix it by taking the queue or device lock around the vb2_mmap() and vb2_get_unmapped_area() calls. Signed-off-by:
-
Laurent Pinchart authored
Explain how the two operations must handle formats and validate buffer sizes when used with VIDIOC_CREATE_BUFS. Signed-off-by:
-
Laurent Pinchart authored
The VIDIOC_CREATE_BUFS ioctl takes a format argument that must contain a valid format supported by the driver. Clarify the documentation. Signed-off-by:
-
Laurent Pinchart authored
The graph traversal API (media_entity_graph_walk_*) doesn't support cyclic graphs and will fail to correctly walk a graph when circular links exist. Support circular graph traversal by checking whether an entity has already been visited before pushing it to the stack. Signed-off-by:
-
Arun Kumar K authored
MFC v7 supports VP8 encoding and this patch adds support for it in the driver. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Arun Kumar K authored
This patch adds new V4L controls for VP8 encoding. Signed-off-by:
Kiran AVND <avnd.kiran@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
The patch modifies the helper function v4l2_ctrl_new_std_menu to accept integer menu controls with standard menu items. Signed-off-by:
-
Arun Kumar K authored
Firmware version v7 is mostly similar to v6 in terms of hardware specific controls and commands. So the hardware specific opr_v6 and cmd_v6 are re-used for v7 also. This patch updates the v6 files to handle v7 version also. Signed-off-by:
-
Arun Kumar K authored
Adds variant data and core support for the MFC v7 firmware Signed-off-by:
-
Arun Kumar K authored
The patch adds the register definition file for new firmware version v7 for MFC. New firmware supports VP8 encoding along with many other features. Signed-off-by:
-
Arun Kumar K authored
The MFC v6 specific code holds good for MFC v7 also as the v7 version is a superset of v6 and the HW interface remains more or less similar. This patch renames the macro IS_MFCV6() to IS_MFCV6_PLUS() so that it can be used for v7 also. Signed-off-by:
-
Arun Kumar K authored
The patch updates few encoder buffer sizes for MFC v6.5 as per the udpdated user manual. The same buffer sizes holds good for v7 firmware also. Signed-off-by:
-
- 01 Aug, 2013 2 commits
-
-
Mauro Carvalho Chehab authored
As reported by Randy Dunlap: When CONFIG_SND=m and CONFIG_SND_AC97_CODEC=m and CONFIG_VIDEO_STK1160=y CONFIG_VIDEO_STK1160_AC97=y drivers/built-in.o: In function `stk1160_ac97_register': (.text+0x122706): undefined reference to `snd_card_create' drivers/built-in.o: In function `stk1160_ac97_register': (.text+0x1227b2): undefined reference to `snd_ac97_bus' drivers/built-in.o: In function `stk1160_ac97_register': (.text+0x1227cd): undefined reference to `snd_card_free' drivers/built-in.o: In function `stk1160_ac97_register': (.text+0x12281b): undefined reference to `snd_ac97_mixer' drivers/built-in.o: In function `stk1160_ac97_register': (.text+0x122832): undefined reference to `snd_card_register' drivers/built-in.o: In function `stk1160_ac97_unregister': (.text+0x12285e): undefined reference to `snd_card_free' Reported-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/pci/cx23885/cx23885-video.c:420:5: warning: no previous prototype for 'cx23885_flatiron_write' [-Wmissing-prototypes] int cx23885_flatiron_write(struct cx23885_dev *dev, u8 reg, u8 data) ^ drivers/media/pci/cx23885/cx23885-video.c:431:4: warning: no previous prototype for 'cx23885_flatiron_read' [-Wmissing-prototypes] u8 cx23885_flatiron_read(struct cx23885_dev *dev, u8 reg) Signed-off-by:
-
