- 16 Aug, 2016 17 commits
-
-
David Howells authored
commit 20f06ed9 upstream. MIPS64 needs to use compat_sys_keyctl for 32-bit userspace rather than calling sys_keyctl. The latter will work in a lot of cases, thereby hiding the issue. Reported-by:
Stephan Mueller <smueller@chronox.de> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: linux-security-module@vger.kernel.org Cc: keyrings@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13832/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Weinstein authored
commit 7de24996 upstream. Add access checks to sys_oabi_epoll_wait() and sys_oabi_semtimedop(). This fixes CVE-2016-3857, a local privilege escalation under CONFIG_OABI_COMPAT. Reported-by:
Chiachih Wu <wuchiachih@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Nicolas Pitre <nico@linaro.org> Signed-off-by:
Dave Weinstein <olorin@google.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Mika Westerberg authored
commit a7ae8195 upstream. Many Intel systems the BIOS declares a SystemIO OpRegion below the SMBus PCI device as can be seen in ACPI DSDT table from Lenovo Yoga 900: Device (SBUS) { OperationRegion (SMBI, SystemIO, (SBAR << 0x05), 0x10) Field (SMBI, ByteAcc, NoLock, Preserve) { HSTS, 8, Offset (0x02), HCON, 8, HCOM, 8, TXSA, 8, DAT0, 8, DAT1, 8, HBDR, 8, PECR, 8, RXSA, 8, SDAT, 16 } There are also bunch of AML methods that that the BIOS can use to access these fields. Most of the systems in question AML methods accessing the SMBI OpRegion are never used. Now, because of this SMBI OpRegion many systems fail to load the SMBus driver with an error looking like one below: ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255) ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver The reason is that this SMBI OpRegion conflicts with the PCI BAR used by the SMBus driver. It turns out that we can install a custom SystemIO address space handler for the SMBus device to intercept all accesses through that OpRegion. This allows us to share the PCI BAR with the AML code if it for some reason is using it. We do not expect that this OpRegion handler will ever be called but if it is we print a warning and prevent all access from the SMBus driver itself. Link: https://bugzilla.kernel.org/show_bug.cgi?id=110041Reported-by:
Andy Lutomirski <luto@kernel.org> Reported-by:
Pali Rohár <pali.rohar@gmail.com> Suggested-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by:
Jean Delvare <jdelvare@suse.de> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Tested-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit f626300a ] tcp_select_initial_window() intends to advertise a window scaling for the maximum possible window size. To do so, it considers the maximum of net.ipv4.tcp_rmem[2] and net.core.rmem_max as the only possible upper-bounds. However, users with CAP_NET_ADMIN can use SO_RCVBUFFORCE to set the socket's receive buffer size to values larger than net.ipv4.tcp_rmem[2] and net.core.rmem_max. Thus, SO_RCVBUFFORCE is effectively ignored by tcp_select_initial_window(). To fix this, consider the maximum of net.ipv4.tcp_rmem[2], net.core.rmem_max and socket's initial buffer space. Fixes: b0573dea ("[NET]: Introduce SO_{SND,RCV}BUFFORCE socket options") Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Suggested-by:
Neal Cardwell <ncardwell@google.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Beniamino Galvani authored
[ Upstream commit e3a3b626 ] macsec_decrypt() is not called when validation is disabled and so macsec_skb_cb(skb)->rx_sa is not set; but it is used later in macsec_post_decrypt(), ensure that it's always initialized. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Beniamino Galvani <bgalvani@redhat.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 59d3f1ce ] Slowpath completion handling is incorrectly changing SPQ_RING_SIZE bits instead of a single one. Fixes: 76a9a364 ("qed: fix handling of concurrent ramrods") Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Vegard Nossum authored
[ Upstream commit d3e6952c ] I ran into this: kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 2 PID: 2012 Comm: trinity-c3 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800b745f2c0 ti: ffff880111740000 task.ti: ffff880111740000 RIP: 0010:[<ffffffff82bbf066>] [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP: 0018:ffff880111747bb8 EFLAGS: 00010286 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000069dd8358 RDX: 0000000000000009 RSI: 0000000000000027 RDI: 0000000000000048 RBP: ffff880111747c00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000069dd8358 R11: 1ffffffff0759723 R12: 0000000000000000 R13: ffff88011a7e4780 R14: 0000000000000027 R15: 0000000000000000 FS: 00007fc738404700(0000) GS:ffff88011af00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc737fdfb10 CR3: 0000000118087000 CR4: 00000000000006e0 Stack: 0000000000000200 ffff880111747bd8 ffffffff810ee611 ffff880119f1f220 ffff880119f1f4f8 ffff880119f1f4f0 ffff88011a7e4780 ffff880119f1f232 ffff880119f1f220 ffff880111747d58 ffffffff82bca542 0000000000000000 Call Trace: [<ffffffff82bca542>] irda_connect+0x562/0x1190 [<ffffffff825ae582>] SYSC_connect+0x202/0x2a0 [<ffffffff825b4489>] SyS_connect+0x9/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 41 89 ca 48 89 e5 41 57 41 56 41 55 41 54 41 89 d7 53 48 89 fb 48 83 c7 48 48 89 fa 41 89 f6 48 c1 ea 03 48 83 ec 20 4c 8b 65 10 <0f> b6 04 02 84 c0 74 08 84 c0 0f 8e 4c 04 00 00 80 7b 48 00 74 RIP [<ffffffff82bbf066>] irttp_connect_request+0x36/0x710 RSP <ffff880111747bb8> ---[ end trace 4cda2588bc055b30 ]--- The problem is that irda_open_tsap() can fail and leave self->tsap = NULL, and then irttp_connect_request() almost immediately dereferences it. Cc: stable@vger.kernel.org Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
-
Mike Manning authored
[ Upstream commit ea06f717 ] Default kernel behavior is to delete IPv6 addresses on link down, which entails deletion of the multicast and the subnet-router anycast addresses. These deletions do not happen with sysctl setting to keep global IPv6 addresses on link down, so every link down/up causes an increment of the anycast and multicast refcounts. These bogus refcounts may stop these addrs from being removed on subsequent calls to delete them. The solution is to leave the groups for the multicast and subnet anycast on link down for the callflow when global IPv6 addresses are kept. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by:
Mike Manning <mmanning@brocade.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Ido Schimmel authored
[ Upstream commit baedbe55 ] Commit 8626c56c ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") caused LLDP packets arriving through a bridge port to be re-injected to the Rx path with skb->dev set to the bridge device, but this breaks the lldpad daemon. The lldpad daemon opens a packet socket with protocol set to ETH_P_LLDP for any valid device on the system, which doesn't not include soft devices such as bridge and VLAN. Since packet sockets (ptype_base) are processed in the Rx path after the Rx handler, LLDP packets with skb->dev set to the bridge device never reach the lldpad daemon. Fix this by making the bridge's Rx handler re-inject LLDP packets with RX_HANDLER_PASS, which effectively restores the behaviour prior to the mentioned commit. This means netfilter will never receive LLDP packets coming through a bridge port, as I don't see a way in which we can have okfn() consume the packet without breaking existing behaviour. I've already carried out a similar fix for STP packets in commit 56fae404 ("bridge: Fix incorrect re-injection of STP packets"). Fixes: 8626c56c ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Cc: Florian Westphal <fw@strlen.de> Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 18d3df3e ] macsec can't cope with mtu frames which need vlan tag insertion, and vlan device set the default mtu equal to the underlying dev's one. By default vlan over macsec devices use invalid mtu, dropping all the large packets. This patch adds a netif helper to check if an upper vlan device needs mtu reduction. The helper is used during vlan devices initialization to set a valid default and during mtu updating to forbid invalid, too bit, mtu values. The helper currently only check if the lower dev is a macsec device, if we get more users, we need to update only the helper (possibly reserving an additional IFF bit). Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit e86663c4 ] Nothing is decrementing the index "i" while we are cleaning up the fragments we could not successful transmit. Fixes: 9cde9450 ("bgmac: implement scatter/gather support") Reported-by: coverity (CID 1352048) Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Beniamino Galvani authored
[ Upstream commit 005db31d ] Commit e826eafa ("bonding: Call netif_carrier_off after register_netdevice") moved netif_carrier_off() from bond_init() to bond_create(), but the latter is called only for initial default devices and ones created through sysfs: $ modprobe bonding $ echo +bond1 > /sys/class/net/bonding_masters $ ip link add bond2 type bond $ grep "MII Status" /proc/net/bonding/* /proc/net/bonding/bond0:MII Status: down /proc/net/bonding/bond1:MII Status: down /proc/net/bonding/bond2:MII Status: up Ensure that carrier is initially off also for devices created through netlink. Signed-off-by:
-
Jason Baron authored
[ Upstream commit 083ae308 ] The per-socket rate limit for 'challenge acks' was introduced in the context of limiting ack loops: commit f2b2c582 ("tcp: mitigate ACK loops for connections as tcp_sock") And I think it can be extended to rate limit all 'challenge acks' on a per-socket basis. Since we have the global tcp_challenge_ack_limit, this patch allows for tcp_challenge_ack_limit to be set to a large value and effectively rely on the per-socket limit, or set tcp_challenge_ack_limit to a lower value and still prevents a single connections from consuming the entire challenge ack quota. It further moves in the direction of eliminating the global limit at some point, as Eric Dumazet has suggested. This a follow-up to: Subject: tcp: make challenge acks less predictable Cc: Eric Dumazet <edumazet@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Cc: Yue Cao <ycao009@ucr.edu> Signed-off-by:
Jason Baron <jbaron@akamai.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 75ff39cc ] Yue Cao claims that current host rate limiting of challenge ACKS (RFC 5961) could leak enough information to allow a patient attacker to hijack TCP sessions. He will soon provide details in an academic paper. This patch increases the default limit from 100 to 1000, and adds some randomization so that the attacker can no longer hijack sessions without spending a considerable amount of probes. Based on initial analysis and patch from Linus. Note that we also have per socket rate limiting, so it is tempting to remove the host limit in the future. v2: randomize the count of challenge acks per second, not the period. Fixes: 282f23c6 ("tcp: implement RFC 5961 3.2") Reported-by:
Yue Cao <ycao009@ucr.edu> Signed-off-by:
Eric Dumazet <edumazet@google.com> Suggested-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
WANG Cong authored
[ Upstream commit 205e1e25 ] Matt reported that we have a NULL pointer dereference in ppp_pernet() from ppp_connect_channel(), i.e. pch->chan_net is NULL. This is due to that a parallel ppp_unregister_channel() could happen while we are in ppp_connect_channel(), during which pch->chan_net set to NULL. Since we need a reference to net per channel, it makes sense to sync the refcnt with the life time of the channel, therefore we should release this reference when we destroy it. Fixes: 1f461dcd ("ppp: take reference on channels netns") Reported-by:
Matt Bennett <Matt.Bennett@alliedtelesis.co.nz> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-ppp@vger.kernel.org Cc: Guillaume Nault <g.nault@alphalink.fr> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Dan Williams authored
commit 1ee6667c upstream. The updated ndctl unit tests discovered that if a pfn configuration with a 4K alignment is read from the namespace, that alignment will be ignored in favor of the default 2M alignment. The result is that the configuration will fail initialization with a message like: dax6.1: bad offset: 0x22000 dax disabled align: 0x200000 Fix this by allowing the alignment read from the info block to override the default which is 2M not 0 in the autodetect path. This also fixes a similar problem with the mode and alignment settings silently being overwritten by the kernel when userspace has changed it. We now will either overwrite the info block if userspace changes the uuid or fail and warn if a live setting disagrees with the info block. Cc: Micah Parrish <micah.parrish@hpe.com> Cc: Toshi Kani <toshi.kani@hpe.com> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Dan Williams authored
commit 45a0dac0 upstream. We want to use the alignment as the allocation and mapping unit. Previously this information was only useful for establishing the data offset, but now it is important to remember the granularity for the later use. Signed-off-by:
-
- 10 Aug, 2016 23 commits
-
-
Greg Kroah-Hartman authored
-
Paul Burton authored
commit a60ae81e upstream. Fix mips_cm_max_vp_width for UP kernels where it previously referenced smp_num_siblings, which is not declared for UP kernels. This led to build errors such as the following: drivers/built-in.o: In function `$L446': irq-mips-gic.c:(.text+0x1994): undefined reference to `smp_num_siblings' drivers/built-in.o:irq-mips-gic.c:(.text+0x199c): more undefined references to `smp_num_siblings' follow On UP kernels simply return 1, leaving the reference to smp_num_siblings in place only for SMP kernels. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12332/Signed-off-by:
-
Miklos Szeredi authored
commit c1892c37 upstream. file_remove_privs() is called with inode lock on file_inode(), which proceeds to calling notify_change() on file->f_path.dentry. Which triggers the WARN_ON_ONCE(!inode_is_locked(inode)) in addition to deadlocking later when ovl_setattr tries to lock the underlying inode again. Fix this mess by not mixing the layers, but doing everything on underlying dentry/inode. Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Fixes: 07a2daab ("ovl: Copy up underlying inode's ->i_mode to overlay inode") Signed-off-by:
-
Scott Bauer authored
commit 10eec60c upstream. This prevents a double-fetch from user space that can lead to to an undersized allocation and heap overflow. Fixes: 54dbc151 ("vfs: hoist the btrfs deduplication ioctl to the vfs") Signed-off-by:
Scott Bauer <sbauer@plzdonthack.me> Signed-off-by:
-
Alexander Shishkin authored
commit a36aa80f upstream. Driver initialization tries to request a hub (GTH) driver module from its probe callback, resulting in a deadlock. This patch solves the problem by adding a deferred work for requesting the hub module. Signed-off-by:
Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by:
-
Alexander Shishkin authored
commit 7a1a47ce upstream. This adds Intel(R) Trace Hub PCI ID for Kaby Lake PCH-H. Signed-off-by:
-
Gregory Greenman authored
commit 16a910a6 upstream. Handle the case when dev_alloc_skb returns NULL. Fixes: 2b67f944 ("cfg80211: reuse existing page fragments in A-MSDU rx") Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Dmitri Epshtein authored
commit 06708f81 upstream. Commit aebea2ba ("net: mvneta: fix Tx interrupt delay") intended to set coalescing threshold to a value guaranteeing interrupt generation per each sent packet, so that buffers can be released with no delay. In fact setting threshold to '1' was wrong, because it causes interrupt every two packets. According to the documentation a reason behind it is following - interrupt occurs once sent buffers counter reaches a value, which is higher than one specified in MVNETA_TXQ_SIZE_REG(q). This behavior was confirmed during tests. Also when testing the SoC working as a NAS device, better performance was observed with int-per-packet, as it strongly depends on the fact that all transmitted packets are released immediately. This commit enables NETA controller work in interrupt per sent packet mode by setting coalescing threshold to 0. Signed-off-by:
Dmitri Epshtein <dima@marvell.com> Signed-off-by:
Marcin Wojtas <mw@semihalf.com> Fixes aebea2ba ("net: mvneta: fix Tx interrupt delay") Acked-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Ilya Dryomov authored
commit 930c5328 upstream. Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Josh Durgin <jdurgin@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit 1488a1e3 upstream. Since 34b48db6 ("block: remove artifical max_hw_sectors cap"), max_sectors is no longer limited to BLK_DEF_MAX_SECTORS and LITE-ON CX1-JB256-HP keeps timing out with higher max_sectors. Revert it to the previous value. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by: dgerasimov@gmail.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=121671 Fixes: 34b48db6 ("block: remove artifical max_hw_sectors cap") Signed-off-by:
-
Lukasz Gemborowski authored
commit 22ebf00e upstream. of_address_to_resource return 0 on successful call but devm_ioremap_resource is called only if it returns non-zero value Signed-off-by:
Lukasz Gemborowski <lukasz.gemborowski@nokia.com> Reviewed-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
-
Sricharan R authored
commit d4f56c77 upstream. index gets incremented during check to determine if the messages can be transferred with dma. But not reset after that, resulting in wrong start value in subsequent loop, causing failure. Fix it. Signed-off-by:
Sricharan R <sricharan@codeaurora.org> Signed-off-by:
-
Laurent Pinchart authored
commit 6519c3d7 upstream. The dv_timings_cap() and enum_dv_timings() pad operations take a pad number as an input argument and return the DV timings capabilities and list of supported DV timings for that pad. Commit bd3e275f ("[media] media: i2c: adv7604: Use v4l2-dv-timings helpers") broke this as it started ignoring the pad number, always returning the information associated with the currently selected input. Fix it. Fixes: bd3e275f ("[media] media: i2c: adv7604: Use v4l2-dv-timings helpers") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Thomas Gleixner authored
commit a7c73414 upstream. Xiaolong Ye reported lock debug warnings triggered by the following commit: 8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine") The bug is the following: the cpuhp_bp_states[] array is cut short when CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless and happily scribble outside of the array bounds... We need to store them in case that the state is unregistered so we can invoke the teardown function. That's independent of CONFIG_SMP. Make sure the array is large enough. Reported-by:
kernel test robot <xiaolong.ye@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Adam Borowski <kilobyte@angband.pl> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Stephane Eranian <eranian@google.com> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: lkp@01.org Cc: tipbuild@zytor.com Fixes: cff7d378 "cpu/hotplug: Convert to a state machine for the control processor" Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanosSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Alexey Dobriyan authored
commit 2c13ce8f upstream. Variable "now" seems to be genuinely used unintialized if branch if (CPUCLOCK_PERTHREAD(timer->it_clock)) { is not taken and branch if (unlikely(sighand == NULL)) { is taken. In this case the process has been reaped and the timer is marked as disarmed anyway. So none of the postprocessing of the sample is required. Return right away. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.bySigned-off-by:
-
James Patrick-Evans authored
commit aa93d1fe upstream. Fix a memory leak on probe error of the airspy usb device driver. The problem is triggered when more than 64 usb devices register with v4l2 of type VFL_TYPE_SDR or VFL_TYPE_SUBDEV. The memory leak is caused by the probe function of the airspy driver mishandeling errors and not freeing the corresponding control structures when an error occours registering the device to v4l2 core. A badusb device can emulate 64 of these devices, and then through continual emulated connect/disconnect of the 65th device, cause the kernel to run out of RAM and crash the kernel, thus causing a local DOS vulnerability. Fixes CVE-2016-5400 Signed-off-by:
James Patrick-Evans <james@jmp-e.com> Reviewed-by:
-
Brian King authored
commit 54e430bb upstream. If we fall back to using LSI on the Croc or Crocodile chip we need to clear the interrupt so we don't hang the system. Tested-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Alan Stern authored
commit 5e7ff2ca upstream. Commit b704f70c ("SCSI: fix bug in scsi_dev_info_list matching") changed the way vendor- and model-string matching was carried out in the routine that looks up entries in a SCSI devinfo list. The new matching code failed to take into account the case of a maximum-length string; in such cases it could end up testing for a terminating '\0' byte beyond the end of the memory allocated to the string. This out-of-bounds bug was detected by UBSAN. I don't know if anybody has actually encountered this bug. The symptom would be that a device entry in the blacklist might not be matched properly if it contained an 8-character vendor name or a 16-character model name. Such entries certainly exist in scsi_static_device_list. This patch fixes the problem by adding a check for a maximum-length string before the '\0' test. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Fixes: b704f70c ("SCSI: fix bug in scsi_dev_info_list matching") Tested-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by:
-
Bruno Prémont authored
commit 262e2bfd upstream. In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL pointer dereference when rsp->msix is NULL: [ 5.622457] NULL pointer dereference at 0000000000000050 [ 5.622457] IP: [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] PGD 0 [ 5.622457] Oops: 0000 [#1] SMP [ 5.622457] Modules linked in: [ 5.622457] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.6.3-x86_64 #1 [ 5.622457] Hardware name: HP ProLiant DL360 G5, BIOS P58 05/02/2011 [ 5.622457] task: ffff8801a88f3740 ti: ffff8801a8954000 task.ti: ffff8801a8954000 [ 5.622457] RIP: 0010:[<ffffffff8155e614>] [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP: 0000:ffff8801afb03de8 EFLAGS: 00010002 [ 5.622457] RAX: 0000000000000000 RBX: 0000000000000032 RCX: 00000000ffffffff [ 5.622457] RDX: 0000000000000002 RSI: ffff8801a79bf8c8 RDI: ffff8800c8f7e7c0 [ 5.622457] RBP: ffff8801afb03e68 R08: 0000000000000000 R09: 0000000000000000 [ 5.622457] R10: 00000000ffff8c47 R11: 0000000000000002 R12: ffff8801a79bf8c8 [ 5.622457] R13: ffff8800c8f7e7c0 R14: ffff8800c8f60000 R15: 0000000000018013 [ 5.622457] FS: 0000000000000000(0000) GS:ffff8801afb00000(0000) knlGS:0000000000000000 [ 5.622457] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.622457] CR2: 0000000000000050 CR3: 0000000001e07000 CR4: 00000000000006e0 [ 5.622457] Stack: [ 5.622457] ffff8801afb03e30 ffffffff810c0f2d 0000000000000086 0000000000000002 [ 5.622457] ffff8801afb03e28 ffffffff816570e1 ffff8800c8994628 0000000000000002 [ 5.622457] ffff8801afb03e60 ffffffff816772d4 b47c472ad6955e68 0000000000000032 [ 5.622457] Call Trace: [ 5.622457] <IRQ> [ 5.622457] [<ffffffff810c0f2d>] ? __wake_up_common+0x4d/0x80 [ 5.622457] [<ffffffff816570e1>] ? usb_hcd_resume_root_hub+0x51/0x60 [ 5.622457] [<ffffffff816772d4>] ? uhci_hub_status_data+0x64/0x240 [ 5.622457] [<ffffffff81560d00>] qla24xx_intr_handler+0xf0/0x2e0 [ 5.622457] [<ffffffff810d569e>] ? get_next_timer_interrupt+0xce/0x200 [ 5.622457] [<ffffffff810c89b4>] handle_irq_event_percpu+0x64/0x100 [ 5.622457] [<ffffffff810c8a77>] handle_irq_event+0x27/0x50 [ 5.622457] [<ffffffff810cb965>] handle_edge_irq+0x65/0x140 [ 5.622457] [<ffffffff8101a498>] handle_irq+0x18/0x30 [ 5.622457] [<ffffffff8101a276>] do_IRQ+0x46/0xd0 [ 5.622457] [<ffffffff817f8fff>] common_interrupt+0x7f/0x7f [ 5.622457] <EOI> [ 5.622457] [<ffffffff81020d38>] ? mwait_idle+0x68/0x80 [ 5.622457] [<ffffffff8102114a>] arch_cpu_idle+0xa/0x10 [ 5.622457] [<ffffffff810c1b97>] default_idle_call+0x27/0x30 [ 5.622457] [<ffffffff810c1d3b>] cpu_startup_entry+0x19b/0x230 [ 5.622457] [<ffffffff810324c6>] start_secondary+0x136/0x140 [ 5.622457] Code: 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 47 58 a8 02 0f 84 c5 00 00 00 48 8b 46 50 49 89 f4 65 8b 15 34 bb aa 7e <39> 50 50 74 11 89 50 50 48 8b 46 50 8b 40 50 41 89 86 60 8b 00 [ 5.622457] RIP [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP <ffff8801afb03de8> [ 5.622457] CR2: 0000000000000050 [ 5.622457] ---[ end trace fa2b19c25106d42b ]--- [ 5.622457] Kernel panic - not syncing: Fatal exception in interrupt The affected code was introduced by commit cdb898c5 (qla2xxx: Add irq affinity notification). Only dereference rsp->msix when it has been set so the machine can boot fine. Possibly rsp->msix is unset because: [ 3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k. [ 3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000. [ 3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3). [ 3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258. [ 3.890145] scsi host0: qla2xxx [ 3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA. [ 3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496). [ 5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps). Signed-off-by:
Bruno Prémont <bonbons@linux-vserver.org> Acked-by:
Quinn Tran <quinn.tran@qlogic.com> Fixes: cdb898c5Signed-off-by:
James Bottomley <jejb@linux.vnet.ibm.com> Signed-off-by:
-
Paul Burton authored
commit 547aefc4 upstream. Commit fbde2d7d ("MIPS: Add generic SMP IPI support") introduced code which calls irq_find_matching_host with a NULL node parameter in order to discover IPI IRQ domains which are not associated with the DT root node's interrupt parent. This suggests that implementations of IPI IRQ domains should effectively ignore the node parameter if it is NULL and search purely based upon the bus token. Commit 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when implementing the GIC IPI IRQ domain, and on MIPS Boston boards this leads to no IPI domain being discovered and a NULL pointer dereference when attempting to send an IPI: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945 task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000 $ 0 : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003 $ 4 : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000 $ 8 : 0000000000000000 0000000000000023 0000000000000001 0000000000000001 $12 : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000 $16 : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc $20 : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000 $24 : 0000000000000000 ffffffff8012de28 $28 : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c Hi : ffffffff8014c174 Lo : a800000001e1e140 epc : ffffffff8016e70c __ipi_send_mask+0x24/0x11c ra : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178 Status: 140084e2 KX SX UX KERNEL EXL Cause : 00800008 (ExcCode 02) BadVA : 0000000000000040 PrId : 0001a920 (MIPS I6400) Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc 0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c 0000000000000001 0000000000000020 0000000000000000 0000000000000000 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001 0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8 a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002 ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001 ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50 0000000000000003 a800000001e48308 0000000000000003 0000000000000008 ... Call Trace: [<ffffffff8016e70c>] __ipi_send_mask+0x24/0x11c [<ffffffff8010ff5c>] mips_smp_send_ipi_mask+0x68/0x178 [<ffffffff801865e8>] generic_exec_single+0x150/0x170 [<ffffffff801868b8>] smp_call_function_single+0x108/0x160 [<ffffffff80110c50>] cps_boot_secondary+0x328/0x394 [<ffffffff80110534>] __cpu_up+0x38/0x90 [<ffffffff8012de4c>] bringup_cpu+0x24/0xac [<ffffffff8012df40>] cpuhp_up_callbacks+0x58/0xdc [<ffffffff8012e648>] cpu_up+0x118/0x18c [<ffffffff806dc158>] smp_init+0xbc/0xe8 [<ffffffff806d4c18>] kernel_init_freeable+0xa0/0x228 [<ffffffff8056c908>] kernel_init+0x10/0xf0 [<ffffffff80105098>] ret_from_kernel_thread+0x14/0x1c Fix this by allowing the GIC IPI IRQ domain to match purely based upon the bus token if the node provided is NULL. Fixes: 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by:
-
Paul Burton authored
commit 99ec8a36 upstream. When mapping an interrupt to a VP(E) we must use the identifier for the VP that the hardware expects, and this does not always match up with the Linux CPU number. Commit d46812bb ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") corrected this for the cases that existed at the time it was written, but commit 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain") added another case before the former patch was merged. This leads to incorrectly using Linux CPU numbers when mapping interrupts to VPs, which breaks on certain systems such as those with multi-core I6400 CPUs. Fix by adding the appropriate call to mips_cm_vp_id() to retrieve the expected VP identifier. Fixes: d46812bb ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") Fixes: 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by:
-
Vegard Nossum authored
commit 3dad5424 upstream. If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa153 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Oliver Hartkopp authored
commit 25e1ed6e upstream. For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2f ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by:
ajneu <ajneu1@gmail.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
