- 09 Sep, 2020 1 commit
-
-
Vaibhav Jain authored
The newly introduced 'perf_stats' attribute uses the default access mode of 0444, allowing non-root users to access performance stats of an nvdimm and potentially force the kernel into issuing a large number of expensive hypercalls. Since the information exposed by this attribute cannot be cached it is better to ward off access to this attribute from users who don't need to access to these performance statistics. Hence update the access mode of 'perf_stats' attribute to be only readable by root users. Fixes: 2d02bf83 ("powerpc/papr_scm: Fetch nvdimm performance stats from PHYP") Reported-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
Vaibhav Jain <vaibhav@linux.ibm.com> Reviewed-by:
Ira Weiny <ira.weiny@intel.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200907110540.21349-1-vaibhav@linux.ibm.com
-
- 08 Sep, 2020 2 commits
-
-
Gautham R. Shenoy authored
Commit d947fb4c ("cpuidle: pseries: Fixup exit latency for CEDE(0)") sets the exit latency of CEDE(0) based on the latency values of the Extended CEDE states advertised by the platform. The values advertised by the platform are in timebase ticks. However the cpuidle framework requires the latency values in microseconds. If the tb-ticks value advertised by the platform correspond to a value smaller than 1us, during the conversion from tb-ticks to microseconds, in the current code, the result becomes zero. This is incorrect as it puts a CEDE state on par with the snooze state. This patch fixes this by rounding up the result obtained while converting the latency value from tb-ticks to microseconds. It also prints a warning in case we discover an extended-cede state with wakeup latency to be 0. In such a case, ensure that CEDE(0) has a non-zero wakeup latency. Fixes: d947fb4c ("cpuidle: pseries: Fixup exit latency for CEDE(0)") Signed-off-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by:
Vaidyanathan Srinivasan <svaidy@linux.ibm.com> Signed-off-by:
-
Alexey Kardashevskiy authored
There are 2 problems with it: 1. "<" vs expected "<<" 2. the shift number is an IOMMU page number mask, not an address mask as the IOMMU page shift is missing. This did not hit us before f1565c24 ("powerpc: use the generic dma_ops_bypass mode") because we had additional code to handle bypass mask so this chunk (almost?) never executed.However there were reports that aacraid does not work with "iommu=nobypass". After f1565c24, aacraid (and probably others which call dma_get_required_mask() before setting the mask) was unable to enable 64bit DMA and fall back to using IOMMU which was known not to work, one of the problems is double free of an IOMMU page. This fixes DMA for aacraid, both with and without "iommu=nobypass" in the kernel command line. Verified with "stress-ng -d 4". Fixes: 6a5c7be5 ("powerpc: Override dma_get_required_mask by platform hook and ops") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by:
-
- 03 Sep, 2020 1 commit
-
-
Michael Ellerman authored
This reverts commit f2af2010. It added a usage of cc-ldoption, but cc-ldoption was removed in commit 055efab3 ("kbuild: drop support for cc-ldoption"). Reported-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
- 02 Sep, 2020 1 commit
-
-
Aneesh Kumar K.V authored
The test is broken w.r.t page table update rules and results in kernel crash as below. Disable the support until we get the tests updated. [ 21.083519] kernel BUG at arch/powerpc/mm/pgtable.c:304! cpu 0x0: Vector: 700 (Program Check) at [c000000c6d1e76c0] pc: c00000000009a5ec: assert_pte_locked+0x14c/0x380 lr: c0000000005eeeec: pte_update+0x11c/0x190 sp: c000000c6d1e7950 msr: 8000000002029033 current = 0xc000000c6d172c80 paca = 0xc000000003ba0000 irqmask: 0x03 irq_happened: 0x01 pid = 1, comm = swapper/0 kernel BUG at arch/powerpc/mm/pgtable.c:304! [link register ] c0000000005eeeec pte_update+0x11c/0x190 [c000000c6d1e7950] 0000000000000001 (unreliable) [c000000c6d1e79b0] c0000000005eee14 pte_update+0x44/0x190 [c000000c6d1e7a10] c000000001a2ca9c pte_advanced_tests+0x160/0x3d8 [c000000c6d1e7ab0] c000000001a2d4fc debug_vm_pgtable+0x7e8/0x1338 [c000000c6d1e7ba0] c0000000000116ec do_one_initcall+0xac/0x5f0 [c000000c6d1e7c80] c0000000019e4fac kernel_init_freeable+0x4dc/0x5a4 [c000000c6d1e7db0] c000000000012474 kernel_init+0x24/0x160 [c000000c6d1e7e20] c00000000000cbd0 ret_from_kernel_thread+0x5c/0x6c With DEBUG_VM disabled [ 20.530152] BUG: Kernel NULL pointer dereference on read at 0x00000000 [ 20.530183] Faulting instruction address: 0xc0000000000df330 cpu 0x33: Vector: 380 (Data SLB Access) at [c000000c6d19f700] pc: c0000000000df330: memset+0x68/0x104 lr: c00000000009f6d8: hash__pmdp_huge_get_and_clear+0xe8/0x1b0 sp: c000000c6d19f990 msr: 8000000002009033 dar: 0 current = 0xc000000c6d177480 paca = 0xc00000001ec4f400 irqmask: 0x03 irq_happened: 0x01 pid = 1, comm = swapper/0 [link register ] c00000000009f6d8 hash__pmdp_huge_get_and_clear+0xe8/0x1b0 [c000000c6d19f990] c00000000009f748 hash__pmdp_huge_get_and_clear+0x158/0x1b0 (unreliable) [c000000c6d19fa10] c0000000019ebf30 pmd_advanced_tests+0x1f0/0x378 [c000000c6d19fab0] c0000000019ed088 debug_vm_pgtable+0x79c/0x1244 [c000000c6d19fba0] c0000000000116ec do_one_initcall+0xac/0x5f0 [c000000c6d19fc80] c0000000019a4fac kernel_init_freeable+0x4dc/0x5a4 [c000000c6d19fdb0] c000000000012474 kernel_init+0x24/0x160 [c000000c6d19fe20] c00000000000cbd0 ret_from_kernel_thread+0x5c/0x6c 33:mon> Signed-off-by:
-
- 01 Sep, 2020 1 commit
-
-
Michael Ellerman authored
In commit 9b725a90 ("powerpc/64s: Disallow PROT_SAO in LPARs by default") PROT_SAO was disabled in guests/LPARs by default. So skip the test if we are running in a guest to avoid a spurious failure. Signed-off-by:
-
- 28 Aug, 2020 2 commits
-
-
Aneesh Kumar K.V authored
If the hypervisor doesn't support hugepages, the kernel ends up allocating a large number of page table pages. The early page table allocation was wrongly setting the max memblock limit to ppc64_rma_size with radix translation which resulted in boot failure as shown below. Kernel panic - not syncing: early_alloc_pgtable: Failed to allocate 16777216 bytes align=0x1000000 nid=-1 from=0x0000000000000000 max_addr=0xffffffffffffffff CPU: 0 PID: 0 Comm: swapper Not tainted 5.8.0-24.9-default+ #2 Call Trace: [c0000000016f3d00] [c0000000007c6470] dump_stack+0xc4/0x114 (unreliable) [c0000000016f3d40] [c00000000014c78c] panic+0x164/0x418 [c0000000016f3dd0] [c000000000098890] early_alloc_pgtable+0xe0/0xec [c0000000016f3e60] [c0000000010a5440] radix__early_init_mmu+0x360/0x4b4 [c0000000016f3ef0] [c000000001099bac] early_init_mmu+0x1c/0x3c [c0000000016f3f10] [c00000000109a320] early_setup+0x134/0x170 This was because the kernel was checking for the radix feature before we enable the feature via mmu_features. This resulted in the kernel using hash restrictions on radix. Rework the early init code such that the kernel boot with memblock restrictions as imposed by hash. At that point, the kernel still hasn't finalized the translation the kernel will end up using. We have three different ways of detecting radix. 1. dt_cpu_ftrs_scan -> used only in case of PowerNV 2. ibm,pa-features -> Used when we don't use cpu_dt_ftr_scan 3. CAS -> Where we negotiate with hypervisor about the supported translation. We look at 1 or 2 early in the boot and after that, we look at the CAS vector to finalize the translation the kernel will use. We also support a kernel command line option (disable_radix) to switch to hash. Update the memblock limit after mmu_early_init_devtree() if the kernel is going to use radix translation. This forces some of the memblock allocations we do before mmu_early_init_devtree() to be within the RMA limit. Fixes: 2bfd65e4 ("powerpc/mm/radix: Add radix callbacks for early init routines") Reported-by:
Shirisha Ganta <shiganta@in.ibm.com> Signed-off-by:
Hari Bathini <hbathini@linux.ibm.com> Signed-off-by:
-
Christophe Leroy authored
low_sleep_handler() can't restore the context from virtual stack because the stack can hardly be accessed with MMU OFF. For now, disable VMAP stack when CONFIG_ADB_PMU is selected. Fixes: cd08f109 ("powerpc/32s: Enable CONFIG_VMAP_STACK") Cc: stable@vger.kernel.org # v5.6+ Reported-by:
Giuseppe Sacco <giuseppe@sguazz.it> Signed-off-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
-
- 27 Aug, 2020 7 commits
-
-
Pratik Rajesh Sampat authored
cpuidle stop state implementation has minor optimizations for P10 where hardware preserves more SPR registers compared to P9. The current P9 driver works for P10, although does few extra save-restores. P9 driver can provide the required power management features like SMT thread folding and core level power savings on a P10 platform. Until the P10 stop driver is available, revert the commit which allows for only P9 systems to utilize cpuidle and blocks all idle stop states for P10. CPU idle states are enabled and tested on the P10 platform with this fix. This reverts commit 8747bf36. Fixes: 8747bf36 ("powerpc/powernv/idle: Replace CPU feature check with PVR check") Signed-off-by:
Pratik Rajesh Sampat <psampat@linux.ibm.com> Reviewed-by:
-
Athira Rajeev authored
IMC trace-mode uses MSR[HV/PR] bits to set the cpumode for the instruction pointer captured in each sample. The bits are fetched from the third double word of the trace record. Reading third double word from IMC trace record should use be64_to_cpu() along with READ_ONCE inorder to fetch correct MSR[HV/PR] bits. Patch addresses this change. Currently we are using PERF_RECORD_MISC_HYPERVISOR as cpumode if MSR HV is 1 and PR is 0 which means the address is from host counter. But using PERF_RECORD_MISC_HYPERVISOR for host counter data will fail to resolve the address -> symbol during "perf report" because perf tools side uses PERF_RECORD_MISC_KERNEL to represent the host counter data. Therefore, fix the trace imc sample data to use PERF_RECORD_MISC_KERNEL as cpumode for host kernel information. Fixes: 77ca3951 ("powerpc/perf: Add kernel support for new MSR[HV PR] bits in trace-imc") Signed-off-by:
Athira Rajeev <atrajeev@linux.vnet.ibm.com> Signed-off-by:
-
Alexey Kardashevskiy authored
The bhrb_filter_map ("The Branch History Rolling Buffer") callback is only defined in raw CPUs' power_pmu structs. The "architected" CPUs use generic_compat_pmu, which does not have this callback, and crashes occur if a user tries to enable branch stack for an event. This add a NULL pointer check for bhrb_filter_map() which behaves as if the callback returned an error. This does not add the same check for config_bhrb() as the only caller checks for cpuhw->bhrb_users which remains zero if bhrb_filter_map==0. Fixes: be80e758 ("powerpc/perf: Add generic compat mode pmu driver") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by:
-
Michael Ellerman authored
The recent commit 01eb0187 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") changed some of the handling of floating point/vector restore. In particular it caused current->thread.fpexc_mode to be copied into the current MSR (via msr_check_and_set()), rather than just into regs->msr (which is moved into MSR on return to userspace). This can lead to a crash in the kernel if we take a floating point exception when restoring FPSCR: Oops: Exception in kernel mode, sig: 8 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: CPU: 3 PID: 101213 Comm: ld64.so.2 Not tainted 5.9.0-rc1-00098-g18445bf4-dirty #9 NIP: c00000000000fbb4 LR: c00000000001a7ac CTR: c000000000183570 REGS: c0000016b7cfb3b0 TRAP: 0700 Not tainted (5.9.0-rc1-00098-g18445bf4-dirty) MSR: 900000000290b933 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 44002444 XER: 00000000 CFAR: c00000000001a7a8 IRQMASK: 1 GPR00: c00000000001ae40 c0000016b7cfb640 c0000000011b7f00 c000001542a0f740 GPR04: c000001542a0f720 c000001542a0eb00 0000000000000900 c000001542a0eb00 GPR08: 000000000000000a 0000000000002000 9000000000009033 0000000000000000 GPR12: 0000000000004000 c0000017ffffd900 0000000000000001 c000000000df5a58 GPR16: c000000000e19c18 c0000000010e1123 0000000000000001 c000000000e1a638 GPR20: 0000000000000000 c0000000044b1d00 0000000000000000 c000001542a0f2a0 GPR24: 00000016c7fe0000 c000001542a0f720 c000000001c93da0 c000000000fe5f28 GPR28: c000001542a0f720 0000000000800000 c0000016b7cfbe90 0000000002802900 NIP load_fp_state+0x4/0x214 LR restore_math+0x17c/0x1f0 Call Trace: 0xc0000016b7cfb680 (unreliable) __switch_to+0x330/0x460 __schedule+0x318/0x920 schedule+0x74/0x140 schedule_timeout+0x318/0x3f0 wait_for_completion+0xc8/0x210 call_usermodehelper_exec+0x234/0x280 do_coredump+0xedc/0x13c0 get_signal+0x1d4/0xbe0 do_notify_resume+0x1a0/0x490 interrupt_exit_user_prepare+0x1c4/0x230 interrupt_return+0x14/0x1c0 Instruction dump: ebe10168 e88101a0 7c8ff120 382101e0 e8010010 7c0803a6 4e800020 790605c4 782905c4 7c0008a8 7c0008a8 c8030200 <fffe058e> 48000088 c8030000 c8230010 Fix it by only loading the fpexc_mode value into regs->msr. Also add a comment to explain that although VSX is subject to the value of fpexc_mode, we don't have to handle that separately because we only allow VSX to be enabled if FP is also enabled. Fixes: 01eb0187 ("powerpc/64s: Fix restore_math unnecessarily changing MSR") Reported-by:
Milton Miller <miltonm@us.ibm.com> Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Link: https://lore.kernel.org/r/20200825093424.3967813-1-mpe@ellerman.id.au
-
Nicholas Piggin authored
Kernel entry sets PPR to HMT_MEDIUM by convention. The scv entry path missed this. Fixes: 7fa95f9a ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by:
-
Randy Dunlap authored
Fix malformed table warning in powerpc/syscall64-abi.rst by making two tables and moving the headings. Documentation/powerpc/syscall64-abi.rst:53: WARNING: Malformed table. Text in column margin in table line 2. =========== ============= ======================================== --- For the sc instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) cr0 Volatile (cr0.SO is the return error condition.) cr1, cr5-7 Nonvolatile lr Nonvolatile --- For the scv 0 instruction, differences with the ELF ABI --- r0 Volatile (System call number.) r3 Volatile (Parameter 1, and return value.) r4-r8 Volatile (Parameters 2-6.) =========== ============= ======================================== Fixes: 7fa95f9a ("powerpc/64s: system call support for scv/rfscv instructions") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Michael Ellerman authored
The build is currently broken, if COMPILE_TEST=y and PPC_PMAC=n: linux/drivers/video/fbdev/controlfb.c: In function ‘control_set_hardware’: linux/drivers/video/fbdev/controlfb.c:276:2: error: implicit declaration of function ‘btext_update_display’ 276 | btext_update_display(p->frame_buffer_phys + CTRLFB_OFF, | ^~~~~~~~~~~~~~~~~~~~ Fix it by including btext.h whenever CONFIG_BOOTX_TEXT is enabled. Fixes: a07a63b0 ("video: fbdev: controlfb: add COMPILE_TEST support") Signed-off-by:Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Link: https://lore.kernel.org/r/20200821104910.3363818-1-mpe@ellerman.id.au
-
- 24 Aug, 2020 3 commits
-
-
Shawn Anastasio authored
Since SAO support was removed from ISA 3.1, skip the prot_sao test if PPC_FEATURE2_ARCH_3_1 is set. Signed-off-by:
Shawn Anastasio <shawn@anastas.io> Signed-off-by:
-
Shawn Anastasio authored
Since migration of guests using SAO to ISA 3.1 hosts may cause issues, disable PROT_SAO in LPARs by default and introduce a new Kconfig option PPC_PROT_SAO_LPAR to allow users to enable it if desired. Signed-off-by:
-
Shawn Anastasio authored
This reverts commit 5c9fa16e. Since PROT_SAO can still be useful for certain classes of software, reintroduce it. Concerns about guest migration for LPARs using SAO will be addressed next. Signed-off-by:
-
- 21 Aug, 2020 2 commits
-
-
Kajol Jain authored
Commit 792f73f7 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") added cpumask file as part of hv-24x7 driver inside the interface folder. The cpumask file is supposed to be in the top folder of the PMU driver in order to make hotplug work. This patch fixes that issue and creates new group 'cpumask_attr_group' to add cpumask file and make sure it added in top folder. command:# cat /sys/devices/hv_24x7/cpumask 0 Fixes: 792f73f7 ("powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask") Signed-off-by:
Kajol Jain <kjain@linux.ibm.com> Signed-off-by:
-
Christophe Leroy authored
In is_module_segment(), when VMALLOC_END is over 0xf0000000, ALIGN(VMALLOC_END, SZ_256M) has value 0. In that case, addr >= ALIGN(VMALLOC_END, SZ_256M) is always true then is_module_segment() always returns false. Use (ALIGN(VMALLOC_END, SZ_256M) - 1) which will have value 0xffffffff and will be suitable for the comparison. Fixes: c4964331 ("powerpc/32s: Only leave NX unset on segments used for modules") Reported-by:
Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
- 20 Aug, 2020 3 commits
-
-
Vasant Hegde authored
As per PAPR we have to look for both EPOW sensor value and event modifier to identify the type of event and take appropriate action. In LoPAPR v1.1 section 10.2.2 includes table 136 "EPOW Action Codes": SYSTEM_SHUTDOWN 3 The system must be shut down. An EPOW-aware OS logs the EPOW error log information, then schedules the system to be shut down to begin after an OS defined delay internal (default is 10 minutes.) Then in section 10.3.2.2.8 there is table 146 "Platform Event Log Format, Version 6, EPOW Section", which includes the "EPOW Event Modifier": For EPOW sensor value = 3 0x01 = Normal system shutdown with no additional delay 0x02 = Loss of utility power, system is running on UPS/Battery 0x03 = Loss of system critical functions, system should be shutdown 0x04 = Ambient temperature too high All other values = reserved We have a user space tool (rtas_errd) on LPAR to monitor for EPOW_SHUTDOWN_ON_UPS. Once it gets an event it initiates shutdown after predefined time. It also starts monitoring for any new EPOW events. If it receives "Power restored" event before predefined time it will cancel the shutdown. Otherwise after predefined time it will shutdown the system. Commit 79872e35 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") changed our handling of the "on UPS/Battery" case, to immediately shutdown the system. This breaks existing setups that rely on the userspace tool to delay shutdown and let the system run on the UPS. Fixes: 79872e35 ("powerpc/pseries: All events of EPOW_SYSTEM_SHUTDOWN must initiate shutdown") Cc: stable@vger.kernel.org # v4.0+ Signed-off-by:
Vasant Hegde <hegdevasant@linux.vnet.ibm.com> [mpe: Massage change log and add PAPR references] Signed-off-by:
-
Athira Rajeev authored
Performance monitor interrupt handler checks if any counter has overflown and calls record_and_restart() in core-book3s which invokes perf_event_overflow() to record the sample information. Apart from creating sample, perf_event_overflow() also does the interrupt and period checks via perf_event_account_interrupt(). Currently we record information only if the SIAR (Sampled Instruction Address Register) valid bit is set (using siar_valid() check) and hence the interrupt check. But it is possible that we do sampling for some events that are not generating valid SIAR, and hence there is no chance to disable the event if interrupts are more than max_samples_per_tick. This leads to soft lockup. Fix this by adding perf_event_account_interrupt() in the invalid SIAR code path for a sampling event. ie if SIAR is invalid, just do interrupt check and don't record the sample information. Reported-by:
-
Frederic Barrat authored
Fix a typo introduced during recent code cleanup, which could lead to silently not freeing resources or an oops message (on PCI hotplug or CAPI reset). Only impacts ioda2, the code path for ioda1 is correct. Fixes: 01e12629 ("powerpc/powernv/pci: Add explicit tracking of the DMA setup state") Signed-off-by:
Frederic Barrat <fbarrat@linux.ibm.com> Reviewed-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
-
- 18 Aug, 2020 3 commits
-
-
Michael Roth authored
For a power9 KVM guest with XIVE enabled, running a test loop where we hotplug 384 vcpus and then unplug them, the following traces can be seen (generally within a few loops) either from the unplugged vcpu: cpu 65 (hwid 65) Ready to die... Querying DEAD? cpu 66 (66) shows 2 list_del corruption. next->prev should be c00a000002470208, but was c00a000002470048 ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:56! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: fuse nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 ... CPU: 66 PID: 0 Comm: swapper/66 Kdump: loaded Not tainted 4.18.0-221.el8.ppc64le #1 NIP: c0000000007ab50c LR: c0000000007ab508 CTR: 00000000000003ac REGS: c0000009e5a17840 TRAP: 0700 Not tainted (4.18.0-221.el8.ppc64le) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 28000842 XER: 20040000 ... NIP __list_del_entry_valid+0xac/0x100 LR __list_del_entry_valid+0xa8/0x100 Call Trace: __list_del_entry_valid+0xa8/0x100 (unreliable) free_pcppages_bulk+0x1f8/0x940 free_unref_page+0xd0/0x100 xive_spapr_cleanup_queue+0x148/0x1b0 xive_teardown_cpu+0x1bc/0x240 pseries_mach_cpu_die+0x78/0x2f0 cpu_die+0x48/0x70 arch_cpu_idle_dead+0x20/0x40 do_idle+0x2f4/0x4c0 cpu_startup_entry+0x38/0x40 start_secondary+0x7bc/0x8f0 start_secondary_prolog+0x10/0x14 or on the worker thread handling the unplug: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 BUG: Bad page state in process kworker/u768:3 pfn:95de1 cpu 314 (hwid 314) Ready to die... page:c00a000002577840 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0 flags: 0x5ffffc00000000() raw: 005ffffc00000000 5deadbeef0000100 5deadbeef0000200 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffff7f 0000000000000000 page dumped because: nonzero mapcount Modules linked in: kvm xt_CHECKSUM ipt_MASQUERADE xt_conntrack ... CPU: 0 PID: 548 Comm: kworker/u768:3 Kdump: loaded Not tainted 4.18.0-224.el8.bz1856588.ppc64le #1 Workqueue: pseries hotplug workque pseries_hp_work_fn Call Trace: dump_stack+0xb0/0xf4 (unreliable) bad_page+0x12c/0x1b0 free_pcppages_bulk+0x5bc/0x940 page_alloc_cpu_dead+0x118/0x120 cpuhp_invoke_callback.constprop.5+0xb8/0x760 _cpu_down+0x188/0x340 cpu_down+0x5c/0xa0 cpu_subsys_offline+0x24/0x40 device_offline+0xf0/0x130 dlpar_offline_cpu+0x1c4/0x2a0 dlpar_cpu_remove+0xb8/0x190 dlpar_cpu_remove_by_index+0x12c/0x150 dlpar_cpu+0x94/0x800 pseries_hp_work_fn+0x128/0x1e0 process_one_work+0x304/0x5d0 worker_thread+0xcc/0x7a0 kthread+0x1ac/0x1c0 ret_from_kernel_thread+0x5c/0x80 The latter trace is due to the following sequence: page_alloc_cpu_dead drain_pages drain_pages_zone free_pcppages_bulk where drain_pages() in this case is called under the assumption that the unplugged cpu is no longer executing. To ensure that is the case, and early call is made to __cpu_die()->pseries_cpu_die(), which runs a loop that waits for the cpu to reach a halted state by polling its status via query-cpu-stopped-state RTAS calls. It only polls for 25 iterations before giving up, however, and in the trace above this results in the following being printed only .1 seconds after the hotplug worker thread begins processing the unplug request: pseries-hotplug-cpu: Attempting to remove CPU <NULL>, drc index: 1000013a Querying DEAD? cpu 314 (314) shows 2 At that point the worker thread assumes the unplugged CPU is in some unknown/dead state and procedes with the cleanup, causing the race with the XIVE cleanup code executed by the unplugged CPU. Fix this by waiting indefinitely, but also making an effort to avoid spurious lockup messages by allowing for rescheduling after polling the CPU status and printing a warning if we wait for longer than 120s. Fixes: eac1e731 ("powerpc/xive: guest exploitation of the XIVE interrupt controller") Suggested-by:Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by:
Greg Kurz <groug@kaod.org> Reviewed-by:
Thiago Jung Bauermann <bauerman@linux.ibm.com> Reviewed-by:
-
Christophe Leroy authored
When MODULES_VADDR is defined, is_module_segment() shall check the address against it instead of checking agains VMALLOC_START. Fixes: 6ca05532 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by:
-
Christophe Leroy authored
On BOOK3S_32, when we have modules and strict kernel RWX, modules are not in vmalloc space but in a dedicated segment that is below PAGE_OFFSET. So KASAN_SHADOW_START must take it into account. MODULES_VADDR can't be used because it is not defined yet in kasan.h Fixes: 6ca05532 ("powerpc/32s: Use dedicated segment for modules with STRICT_KERNEL_RWX") Signed-off-by:
-
- 17 Aug, 2020 7 commits
-
-
Christophe Leroy authored
Commit ("03fd42d4 powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") reworked the setup of the early debug area and mistakenly replaced 128 * 1024 by SZ_128. Change to SZ_128K to restore the original 128 kbytes size of the area. Fixes: 03fd42d4 ("powerpc/fixmap: Fix FIX_EARLY_DEBUG_BASE when page size is 256k") Signed-off-by: -
Aneesh Kumar K.V authored
IS_ENABLED() instead of #ifdef still requires variable declaration. In this specific case, default_uamor is declared in asm/pkeys.h which is only included if PPC_MEM_KEYS is enabled. arch/powerpc/mm/book3s64/hash_utils.c: In function ‘hash__early_init_mmu_secondary’: arch/powerpc/mm/book3s64/hash_utils.c:1119:21: error: ‘default_uamor’ undeclared (first use in this function) 1119 | mtspr(SPRN_UAMOR, default_uamor); | ^~~~~~~~~~~~~ Fixes: 6553fb79 ("powerpc/pkeys: Fix boot failures with Nemo board (A-EON AmigaOne X1000)") Signed-off-by: -
Madhavan Srinivasan authored
__machine_check_early_realmode_p*() are currently declared as extern in cputable.c and because of this when compiled with "C=1" (which enables semantic checker) produces these warnings. CHECK arch/powerpc/kernel/mce_power.c arch/powerpc/kernel/mce_power.c:709:6: warning: symbol '__machine_check_early_realmode_p7' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:717:6: warning: symbol '__machine_check_early_realmode_p8' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:722:6: warning: symbol '__machine_check_early_realmode_p9' was not declared. Should it be static? arch/powerpc/kernel/mce_power.c:740:6: warning: symbol '__machine_check_early_realmode_p10' was not declared. Should it be static? Patch here moves the declaration to asm/mce.h and includes the same in cputable.c Fixes: ae744f34 ("powerpc/book3s: Flush SLB/TLBs if we get SLB/TLB machine check errors on power8") Fixes: 7b9f71f9 ("powerpc/64s: POWER9 machine check handler") Signed-off-by: -
Madhavan Srinivasan authored
Add a raw mode cputable entry for POWER10. Copies most of the fields from commit a3ea40d5 ("powerpc: Add POWER10 architected mode") except for oprofile_cpu_type, machine_check_early, pvr_mask and pvr_mask fields. On bare metal systems we use DT CPU features, which doesn't need a cputable entry. But in VMs we still rely on the raw cputable entry to set the correct values for the PMU related fields. Fixes: a3ea40d5 ("powerpc: Add POWER10 architected mode") Signed-off-by:
-
Athira Rajeev authored
Include capability flag PERF_PMU_CAP_EXTENDED_REGS for power10 and expose MMCR3, SIER2, SIER3 registers as part of extended regs. Also introduce PERF_REG_PMU_MASK_31 to define extended mask value at runtime for power10. Suggested-by:
Ryan Grimm <grimm@linux.ibm.com> Signed-off-by:
Nageswara R Sastry <nasastry@in.ibm.com> Reviewed-by:
Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Anju T Sudhakar authored
Add support for perf extended register capability in powerpc. The capability flag PERF_PMU_CAP_EXTENDED_REGS, is used to indicate the PMU which support extended registers. The generic code define the mask of extended registers as 0 for non supported architectures. Patch adds extended regs support for power9 platform by exposing MMCR0, MMCR1 and MMCR2 registers. REG_RESERVED mask needs update to include extended regs. PERF_REG_EXTENDED_MASK, contains mask value of the supported registers, is defined at runtime in the kernel based on platform since the supported registers may differ from one processor version to another and hence the MASK value. With the patch: available registers: r0 r1 r2 r3 r4 r5 r6 r7 r8 r9 r10 r11 r12 r13 r14 r15 r16 r17 r18 r19 r20 r21 r22 r23 r24 r25 r26 r27 r28 r29 r30 r31 nip msr orig_r3 ctr link xer ccr softe trap dar dsisr sier mmcra mmcr0 mmcr1 mmcr2 PERF_RECORD_SAMPLE(IP, 0x1): 4784/4784: 0 period: 1 addr: 0 ... intr regs: mask 0xffffffffffff ABI 64-bit .... r0 0xc00000000012b77c .... r1 0xc000003fe5e03930 .... r2 0xc000000001b0e000 .... r3 0xc000003fdcddf800 .... r4 0xc000003fc7880000 .... r5 0x9c422724be .... r6 0xc000003fe5e03908 .... r7 0xffffff63bddc8706 .... r8 0x9e4 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0xc0000000001299c0 .... r13 0xc000003ffffc4800 .... r14 0x0 .... r15 0x7fffdd8b8b00 .... r16 0x0 .... r17 0x7fffdd8be6b8 .... r18 0x7e7076607730 .... r19 0x2f .... r20 0xc00000001fc26c68 .... r21 0xc0002041e4227e00 .... r22 0xc00000002018fb60 .... r23 0x1 .... r24 0xc000003ffec4d900 .... r25 0x80000000 .... r26 0x0 .... r27 0x1 .... r28 0x1 .... r29 0xc000000001be1260 .... r30 0x6008010 .... r31 0xc000003ffebb7218 .... nip 0xc00000000012b910 .... msr 0x9000000000009033 .... orig_r3 0xc00000000012b86c .... ctr 0xc0000000001299c0 .... link 0xc00000000012b77c .... xer 0x0 .... ccr 0x28002222 .... softe 0x1 .... trap 0xf00 .... dar 0x0 .... dsisr 0x80000000000 .... sier 0x0 .... mmcra 0x80000000000 .... mmcr0 0x82008090 .... mmcr1 0x1e000000 .... mmcr2 0x0 ... thread: perf:4784 Signed-off-by:
Anju T Sudhakar <anju@linux.vnet.ibm.com> Signed-off-by:
Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Reviewed-by:
-
Michael Neuling authored
On POWER10 bit 12 in the PVR indicates if the core is SMT4 or SMT8. Bit 12 is set for SMT4. Without this patch, /proc/cpuinfo on a SMT4 DD1 POWER10 looks like this: cpu : POWER10, altivec supported revision : 17.0 (pvr 0080 1100) Fixes: a3ea40d5 ("powerpc: Add POWER10 architected mode") Cc: stable@vger.kernel.org # v5.8 Signed-off-by:
Michael Neuling <mikey@neuling.org> Reviewed-by:
-
- 16 Aug, 2020 6 commits
-
-
Linus Torvalds authored
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "A few differerent things in here. Seems like syzbot got some more io_uring bits wired up, and we got a handful of reports and the associated fixes are in here. General fixes too, and a lot of them marked for stable. Lastly, a bit of fallout from the async buffered reads, where we now more easily trigger short reads. Some applications don't really like that, so the io_read() code now handles short reads internally, and got a cleanup along the way so that it's now easier to read (and documented). We're now passing tests that failed before" * tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block: io_uring: short circuit -EAGAIN for blocking read attempt io_uring: sanitize double poll handling io_uring: internally retry short reads io_uring: retain iov_iter state over io_read/io_write calls task_work: only grab task signal lock when needed io_uring: enable lookup of links holding inflight files io_uring: fail poll arm on queue proc failure io_uring: hold 'ctx' reference around task_work queue + execute fs: RWF_NOWAIT should imply IOCB_NOIO io_uring: defer file table grabbing request cleanup for locked requests io_uring: add missing REQ_F_COMP_LOCKED for nested requests io_uring: fix recursive completion locking on oveflow flush io_uring: use TWA_SIGNAL for task_work uncondtionally io_uring: account locked memory before potential error case io_uring: set ctx sq/cq entry count earlier io_uring: Fix NULL pointer dereference in loop_rw_iter() io_uring: add comments on how the async buffered read retry works io_uring: io_async_buf_func() need not test page bit
-
Mike Rapoport authored
Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") converted parisc to use generic version of pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for PMD. Restore the original version of pmd_alloc_one() for parisc, just use GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and memset. Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()") Reported-by:
Meelis Roos <mroos@linux.ee> Signed-off-by:
Mike Rapoport <rppt@linux.ibm.com> Tested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create -
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fix from Palmer Dabbelt: "I collected a single fix during the merge window: we managed to break the early trap setup on !MMU, this fixes it" * tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Setup exception vector for nommu platform
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
-
- 15 Aug, 2020 1 commit
-
-
Jens Axboe authored
One case was missed in the short IO retry handling, and that's hitting -EAGAIN on a blocking attempt read (eg from io-wq context). This is a problem on sockets that are marked as non-blocking when created, they don't carry any REQ_F_NOWAIT information to help us terminate them instead of perpetually retrying. Fixes: 227c0c96 ("io_uring: internally retry short reads") Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
