- 20 Mar, 2020 40 commits
-
-
Sven Eckelmann authored
commit 6a4bc44b upstream. The neighbor compare API implementation for B.A.T.M.A.N. V checks whether the neigh_ifinfo for this neighbor on a specific interface exists. A warning is printed when it isn't found. But it is not called inside a lock which would prevent that this information is lost right before batadv_neigh_ifinfo_get. It must therefore be expected that batadv_v_neigh_(cmp|is_sob) might not be able to get the requested neigh_ifinfo. A WARN_ON for such a situation seems not to be appropriate because this will only flood the kernel logs. The warnings must therefore be removed. Signed-off-by:
Sven Eckelmann <sven.eckelmann@openmesh.com> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Linus Lüssing authored
commit 54e22f26 upstream. This patch fixes an issue in the translation table code potentially leading to a TT Request + Response storm. The issue may occur for nodes involving BLA and an inconsistent configuration of the batman-adv AP isolation feature. However, since the new multicast optimizations, a single, malformed packet may lead to a mesh-wide, persistent Denial-of-Service, too. The issue occurs because nodes are currently OR-ing the TT sync flags of all originators announcing a specific MAC address via the translation table. When an intermediate node now receives a TT Request and wants to answer this on behalf of the destination node, then this intermediate node now responds with an altered flag field and broken CRC. The next OGM of the real destination will lead to a CRC mismatch and triggering a TT Request and Response again. Furthermore, the OR-ing is currently never undone as long as at least one originator announcing the according MAC address remains, leading to the potential persistency of this issue. This patch fixes this issue by storing the flags used in the CRC calculation on a a per TT orig entry basis to be able to respond with the correct, original flags in an intermediate TT Response for one thing. And to be able to correctly unset sync flags once all nodes announcing a sync flag vanish for another. Fixes: e9c00136 ("batman-adv: fix tt_global_entries flags update") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Acked-by:
Antonio Quartulli <a@unstable.cc> [sw: typo in commit message] Signed-off-by:
-
Sven Eckelmann authored
commit d6289088 upstream. The wifi driver can decide to not provide parts of the station info. For example, the expected throughput of the station can be omitted when the used rate control doesn't provide this kind of information. The B.A.T.M.A.N. V implementation must therefore check the filled bitfield before it tries to access the expected_throughput of the returned station_info. Reported-by:
Alvaro Antelo <alvaro.antelo@gmail.com> Fixes: c833484e ("batman-adv: ELP - compute the metric based on the estimated throughput") Signed-off-by:
Sven Eckelmann <sven@narfation.org> Reviewed-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
-
Sven Eckelmann authored
commit 3f3f8732 upstream. A wifi interface should never be handled like an ethernet devices. The parser of the cfg80211 output must therefore skip the ethtool code when cfg80211_get_station returned an error. Fixes: f44a3ae9 ("batman-adv: refactor wifi interface detection") Signed-off-by:
-
Sven Eckelmann authored
commit 36d4d68c upstream. The stats are generated by batadv_interface_stats and must not be stored directly in the net_device stats member variable. The batadv_priv bat_counters information is assembled when ndo_get_stats is called. The stats previously stored in net_device::stats is then overwritten. The batman-adv counters must therefore be increased when an ARP packet is answered locally via the distributed arp table. Fixes: c384ea3e ("batman-adv: Distributed ARP Table - add snooping functions for ARP messages") Signed-off-by:
-
Sven Eckelmann authored
commit 1a9070ec upstream. The gateway selection class variable is shared between different algorithm versions. But the interpretation of the content is algorithm specific. The initialization is therefore also algorithm specific. But this was implemented incorrectly and the initialization for BATMAN_V always overwrote the value previously written for BATMAN_IV. This could only be avoided when BATMAN_V was disabled during compile time. Using a special batadv_algo hook for this initialization avoids this problem. Fixes: 50164d8f ("batman-adv: B.A.T.M.A.N. V - implement GW selection logic") Signed-off-by:
-
Linus Lüssing authored
commit 51c6b429 upstream. Trying to split and transmit a unicast packet in 16 parts will fail for the final fragment: After having sent the 15th one with a frag_packet.no index of 14, we will increase the the index to 15 - and return with an error code immediately, even though one more fragment is due for transmission and allowed. Fixing this issue by moving the check before incrementing the index. While at it, adding an unlikely(), because the check is actually more of an assertion. Fixes: ee75ed88 ("batman-adv: Fragment and send skbs larger than mtu") Signed-off-by:
-
Sven Eckelmann authored
commit 248e23b5 upstream. The function batadv_frag_skb_buffer was supposed not to consume the skbuff on errors. This was followed in the helper function batadv_frag_insert_packet when the skb would potentially be inserted in the fragment queue. But it could happen that the next helper function batadv_frag_merge_packets would try to merge the fragments and fail. This results in a kfree_skb of all the enqueued fragments (including the just inserted one). batadv_recv_frag_packet would detect the error in batadv_frag_skb_buffer and try to free the skb again. The behavior of batadv_frag_skb_buffer (and its helper batadv_frag_insert_packet) must therefore be changed to always consume the skbuff to have a common behavior and avoid the double kfree_skb. Fixes: 610bfc6b ("batman-adv: Receive fragmented packets and merge") Signed-off-by:
-
Vladis Dronov authored
commit d6c066fd upstream. Add a sanity check to efivar_store_raw() the same way efivar_{attr,size,data}_read() and efivar_show_raw() have it. Signed-off-by:
Vladis Dronov <vdronov@redhat.com> Signed-off-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200305084041.24053-3-vdronov@redhat.com Link: https://lore.kernel.org/r/20200308080859.21568-25-ardb@kernel.orgSigned-off-by:
-
Eric Dumazet authored
commit b6f61189 upstream. IPV6_ADDRFORM is able to transform IPv6 socket to IPv4 one. While this operation sounds illogical, we have to support it. One of the things it does for TCP socket is to switch sk->sk_prot to tcp_prot. We now have other layers playing with sk->sk_prot, so we should make sure to not interfere with them. This patch makes sure sk_prot is the default pointer for TCP IPv6 socket. syzbot reported : BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD a0113067 P4D a0113067 PUD a8771067 PMD 0 Oops: 0010 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10686 Comm: syz-executor.0 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: inet_release+0x165/0x1c0 net/ipv4/af_inet.c:427 __sock_release net/socket.c:605 [inline] sock_close+0xe1/0x260 net/socket.c:1283 __fput+0x2e4/0x740 fs/file_table.c:280 ____fput+0x15/0x20 fs/file_table.c:313 task_work_run+0x176/0x1b0 kernel/task_work.c:113 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop arch/x86/entry/common.c:164 [inline] prepare_exit_to_usermode+0x480/0x5b0 arch/x86/entry/common.c:195 syscall_return_slowpath+0x113/0x4a0 arch/x86/entry/common.c:278 do_syscall_64+0x11f/0x1c0 arch/x86/entry/common.c:304 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45c429 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2ae75dac78 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: 0000000000000000 RBX: 00007f2ae75db6d4 RCX: 000000000045c429 RDX: 0000000000000001 RSI: 000000000000011a RDI: 0000000000000004 RBP: 000000000076bf20 R08: 0000000000000038 R09: 0000000000000000 R10: 0000000020000180 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a9d R14: 00000000004ccfb4 R15: 000000000076bf2c Modules linked in: CR2: 0000000000000000 ---[ end trace 82567b5207e87bae ]--- RIP: 0010:0x0 Code: Bad RIP value. RSP: 0018:ffffc9000281fce0 EFLAGS: 00010246 RAX: 1ffffffff15f48ac RBX: ffffffff8afa4560 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8880a69a8f40 RBP: ffffc9000281fd10 R08: ffffffff86ed9b0c R09: ffffed1014d351f5 R10: ffffed1014d351f5 R11: 0000000000000000 R12: ffff8880920d3098 R13: 1ffff1101241a613 R14: ffff8880a69a8f40 R15: 0000000000000000 FS: 00007f2ae75db700(0000) GS:ffff8880aea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffffffffd6 CR3: 00000000a3b85000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by: syzbot+1938db17e275e85dc328@syzkaller.appspotmail.com Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Daniel Drake authored
commit da72a379 upstream. VMD subdevices are created with a PCI domain ID of 0x10000 or higher. These subdevices are also handled like all other PCI devices by dmar_pci_bus_notifier(). However, when dmar_alloc_pci_notify_info() take records of such devices, it will truncate the domain ID to a u16 value (in info->seg). The device at (e.g.) 10000:00:02.0 is then treated by the DMAR code as if it is 0000:00:02.0. In the unlucky event that a real device also exists at 0000:00:02.0 and also has a device-specific entry in the DMAR table, dmar_insert_dev_scope() will crash on: BUG_ON(i >= devices_cnt); That's basically a sanity check that only one PCI device matches a single DMAR entry; in this case we seem to have two matching devices. Fix this by ignoring devices that have a domain number higher than what can be looked up in the DMAR table. This problem was carefully diagnosed by Jian-Hong Pan. Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Daniel Drake <drake@endlessm.com> Fixes: 59ce0515 ("iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens") Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Zhenzhong Duan authored
commit b0bb0c22 upstream. When base address in RHSA structure doesn't match base address in each DRHD structure, the base address in last DRHD is printed out. This doesn't make sense when there are multiple DRHD units, fix it by printing the buggy RHSA's base address. Signed-off-by:
Zhenzhong Duan <zhenzhong.duan@gmail.com> Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Signed-off-by:
-
qize wang authored
commit 1e58252e upstream. mwifiex_process_tdls_action_frame() without checking the incoming tdls infomation element's vality before use it, this may cause multi heap buffer overflows. Fix them by putting vality check before use it. IE is TLV struct, but ht_cap and ht_oper aren’t TLV struct. the origin marvell driver code is wrong: memcpy(&sta_ptr->tdls_cap.ht_oper, pos,.... memcpy((u8 *)&sta_ptr->tdls_cap.ht_capb, pos,... Fix the bug by changing pos(the address of IE) to pos+2 ( the address of IE value ). Signed-off-by:
qize wang <wangqize888888888@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
Matthias Maennich <maennich@google.com> Signed-off-by:
-
Jakub Kicinski authored
commit c049b345 upstream. Add missing attribute validation for cthelper to the netlink policy. Fixes: 12f7a505 ("netfilter: add user-space connection tracking helper infrastructure") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jakub Kicinski authored
commit 5cde05c6 upstream. Add missing attribute validation for NL80211_ATTR_OPER_CLASS to the netlink policy. Fixes: 1057d35e ("cfg80211: introduce TDLS channel switch commands") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jakub Kicinski authored
commit 056e9375 upstream. Add missing attribute validation for beacon report scanning to the netlink policy. Fixes: 1d76250b ("nl80211: support beacon report scanning") Signed-off-by:
-
Jakub Kicinski authored
commit 0e1a1d85 upstream. Add missing attribute validation for critical protocol fields to the netlink policy. Fixes: 5de17984 ("cfg80211: introduce critical protocol indication from user-space") Signed-off-by:
-
Yonghyun Hwang authored
commit 77a1bce8 upstream. intel_iommu_iova_to_phys() has a bug when it translates an IOVA for a huge page onto its corresponding physical address. This commit fixes the bug by accomodating the level of page entry for the IOVA and adds IOVA's lower address to the physical address. Cc: <stable@vger.kernel.org> Acked-by:
Moritz Fischer <mdf@kernel.org> Signed-off-by:
Yonghyun Hwang <yonghyun@google.com> Fixes: 38717946 ("VT-d: Changes to support KVM") Signed-off-by:
-
Hans de Goede authored
commit 59833696 upstream. Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Some distros, e.g. Fedora, have tools watching for the kernel backtraces logged by the WARN macros and offer the user an option to file a bug for this when these are encountered. The WARN_TAINT in warn_invalid_dmar() + another iommu WARN_TAINT, addressed in another patch, have lead to over a 100 bugs being filed this way. This commit replaces the WARN_TAINT("...") calls, with pr_warn(FW_BUG "...") + add_taint(TAINT_FIRMWARE_WORKAROUND, ...) calls avoiding the backtrace and thus also avoiding bug-reports being filed about this against the kernel. Fixes: fd0c8894 ("intel-iommu: Set a more specific taint flag for invalid BIOS DMAR tables") Fixes: e625b4a9 ("iommu/vt-d: Parse ANDD records") Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Vladis Dronov authored
commit 286d3250 upstream. There is a race and a buffer overflow corrupting a kernel memory while reading an EFI variable with a size more than 1024 bytes via the older sysfs method. This happens because accessing struct efi_variable in efivar_{attr,size,data}_read() and friends is not protected from a concurrent access leading to a kernel memory corruption and, at best, to a crash. The race scenario is the following: CPU0: CPU1: efivar_attr_read() var->DataSize = 1024; efivar_entry_get(... &var->DataSize) down_interruptible(&efivars_lock) efivar_attr_read() // same EFI var var->DataSize = 1024; efivar_entry_get(... &var->DataSize) down_interruptible(&efivars_lock) virt_efi_get_variable() // returns EFI_BUFFER_TOO_SMALL but // var->DataSize is set to a real // var size more than 1024 bytes up(&efivars_lock) virt_efi_get_variable() // called with var->DataSize set // to a real var size, returns // successfully and overwrites // a 1024-bytes kernel buffer up(&efivars_lock) This can be reproduced by concurrent reading of an EFI variable which size is more than 1024 bytes: ts# for cpu in $(seq 0 $(nproc --ignore=1)); do ( taskset -c $cpu \ cat /sys/firmware/efi/vars/KEKDefault*/size & ) ; done Fix this by using a local variable for a var's data buffer size so it does not get overwritten. Fixes: e14ab23d ("efivars: efivar_entry API") Reported-by: Bob Sanders <bob.sanders@hpe.com> and the LTP testsuite Signed-off-by:
-
Eugeniy Paltsev authored
commit 8d92e992 upstream. The default defintions use fill pattern 0x90 for padding which for ARC generates unintended "ldh_s r12,[r0,0x20]" corresponding to opcode 0x9090 So use ".align 4" which insert a "nop_s" instruction instead. Cc: stable@vger.kernel.org Acked-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Vitaly Kuznetsov authored
commit 342993f9 upstream. After commit 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Hyper-V guests on KVM stopped booting with: kvm_nested_vmexit: rip fffff802987d6169 reason EPT_VIOLATION info1 181 info2 0 int_info 0 int_info_err 0 kvm_page_fault: address febd0000 error_code 181 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 kvm_emulate_insn: 0:fffff802987d6169: f3 a5 FAIL kvm_inj_exception: #UD (0x0) "f3 a5" is a "rep movsw" instruction, which should not be intercepted at all. Commit c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") reduced the number of fields cleared by init_decode_cache() claiming that they are being cleared elsewhere, 'intercept', however, is left uncleared if the instruction does not have any of the "slow path" flags (NotImpl, Stack, Op3264, Sse, Mmx, CheckPerm, NearBranch, No16 and of course Intercept itself). Fixes: c44b4c6a ("KVM: emulate: clean up initializations in init_decode_cache") Fixes: 07721fee ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: stable@vger.kernel.org Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Al Viro authored
commit 21039132 upstream. with the way fs/namei.c:do_last() had been done, ->atomic_open() instances needed to recognize the case when existing file got found with O_EXCL|O_CREAT, either by falling back to finish_no_open() or failing themselves. gfs2 one didn't. Fixes: 6d4ade98 (GFS2: Add atomic_open support) Cc: stable@kernel.org # v3.11 Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Al Viro authored
commit d9a9f484 upstream. several iterations of ->atomic_open() calling conventions ago, we used to need fput() if ->atomic_open() failed at some point after successful finish_open(). Now (since 2016) it's not needed - struct file carries enough state to make fput() work regardless of the point in struct file lifecycle and discarding it on failure exits in open() got unified. Unfortunately, I'd missed the fact that we had an instance of ->atomic_open() (cifs one) that used to need that fput(), as well as the stale comment in finish_open() demanding such late failure handling. Trivially fixed... Fixes: fe9ec829 "do_last(): take fput() on error after opening to out:" Cc: stable@kernel.org # v4.7+ Signed-off-by:
-
Colin Ian King authored
commit d785476c upstream. Variable grph_obj_type is being assigned twice, one of these is redundant so remove it. Addresses-Coverity: ("Evaluation order violation") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by:
-
Hillf Danton authored
commit aa202f1f upstream. wq_select_unbound_cpu() is designed for unbound workqueues only, but it's wrongly called when using a bound workqueue too. Fixing this ensures work queued to a bound workqueue with cpu=WORK_CPU_UNBOUND always runs on the local CPU. Before, that would happen only if wq_unbound_cpumask happened to include it (likely almost always the case), or was empty, or we got lucky with forced round-robin placement. So restricting /sys/devices/virtual/workqueue/cpumask to a small subset of a machine's CPUs would cause some bound work items to run unexpectedly there. Fixes: ef557180 ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Cc: stable@vger.kernel.org # v4.5+ Signed-off-by:
Hillf Danton <hdanton@sina.com> [dj: massage changelog] Signed-off-by:
Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Tejun Heo <tj@kernel.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: linux-kernel@vger.kernel.org Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Hans de Goede authored
commit 81ee85d0 upstream. Quoting from the comment describing the WARN functions in include/asm-generic/bug.h: * WARN(), WARN_ON(), WARN_ON_ONCE, and so on can be used to report * significant kernel issues that need prompt attention if they should ever * appear at runtime. * * Do not use these macros when checking for invalid external inputs The (buggy) firmware tables which the dmar code was calling WARN_TAINT for really are invalid external inputs. They are not under the kernel's control and the issues in them cannot be fixed by a kernel update. So logging a backtrace, which invites bug reports to be filed about this, is not helpful. Fixes: 556ab45f ("ioat2: catch and recover from broken vtd configurations v6") Signed-off-by:
-
Halil Pasic authored
commit f5f6b95c upstream. Since nobody else is going to restart our hw_queue for us, the blk_mq_start_stopped_hw_queues() is in virtblk_done() is not sufficient necessarily sufficient to ensure that the queue will get started again. In case of global resource outage (-ENOMEM because mapping failure, because of swiotlb full) our virtqueue may be empty and we can get stuck with a stopped hw_queue. Let us not stop the queue on arbitrary errors, but only on -EONSPC which indicates a full virtqueue, where the hw_queue is guaranteed to get started by virtblk_done() before when it makes sense to carry on submitting requests. Let us also remove a stale comment. Signed-off-by:
Halil Pasic <pasic@linux.ibm.com> Cc: Jens Axboe <axboe@kernel.dk> Fixes: f7728002 ("virtio_ring: fix return code on DMA mapping fails") Link: https://lore.kernel.org/r/20200213123728.61216-2-pasic@linux.ibm.comSigned-off-by:
Michael S. Tsirkin <mst@redhat.com> Reviewed-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 611d779a ] So far we have the unfortunate situation that mdio_bus_phy_may_suspend() is called in suspend AND resume path, assuming that function result is the same. After the original change this is no longer the case, resulting in broken resume as reported by Geert. To fix this call mdio_bus_phy_may_suspend() in the suspend path only, and let the phy_device store the info whether it was suspended by MDIO bus PM. Fixes: 503ba7c6 ("net: phy: Avoid multiple suspends") Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Shakeel Butt authored
[ Upstream commit e876ecc6 ] We are testing network memory accounting in our setup and noticed inconsistent network memory usage and often unrelated cgroups network usage correlates with testing workload. On further inspection, it seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in irq context specially for cgroup v1. mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context and kind of assumes that this can only happen from sk_clone_lock() and the source sock object has already associated cgroup. However in cgroup v1, where network memory accounting is opt-in, the source sock can be unassociated with any cgroup and the new cloned sock can get associated with unrelated interrupted cgroup. Cgroup v2 can also suffer if the source sock object was created by process in the root cgroup or if sk_alloc() is called in irq context. The fix is to just do nothing in interrupt. WARNING: Please note that about half of the TCP sockets are allocated from the IRQ context, so, memory used by such sockets will not be accouted by the memcg. The stack trace of mem_cgroup_sk_alloc() from IRQ-context: CPU: 70 PID: 12720 Comm: ssh Tainted: 5.6.0-smp-DEV #1 Hardware name: ... Call Trace: <IRQ> dump_stack+0x57/0x75 mem_cgroup_sk_alloc+0xe9/0xf0 sk_clone_lock+0x2a7/0x420 inet_csk_clone_lock+0x1b/0x110 tcp_create_openreq_child+0x23/0x3b0 tcp_v6_syn_recv_sock+0x88/0x730 tcp_check_req+0x429/0x560 tcp_v6_rcv+0x72d/0xa40 ip6_protocol_deliver_rcu+0xc9/0x400 ip6_input+0x44/0xd0 ? ip6_protocol_deliver_rcu+0x400/0x400 ip6_rcv_finish+0x71/0x80 ipv6_rcv+0x5b/0xe0 ? ip6_sublist_rcv+0x2e0/0x2e0 process_backlog+0x108/0x1e0 net_rx_action+0x26b/0x460 __do_softirq+0x104/0x2a6 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.19+0x40/0x50 __local_bh_enable_ip+0x51/0x60 ip6_finish_output2+0x23d/0x520 ? ip6table_mangle_hook+0x55/0x160 __ip6_finish_output+0xa1/0x100 ip6_finish_output+0x30/0xd0 ip6_output+0x73/0x120 ? __ip6_finish_output+0x100/0x100 ip6_xmit+0x2e3/0x600 ? ipv6_anycast_cleanup+0x50/0x50 ? inet6_csk_route_socket+0x136/0x1e0 ? skb_free_head+0x1e/0x30 inet6_csk_xmit+0x95/0xf0 __tcp_transmit_skb+0x5b4/0xb20 __tcp_send_ack.part.60+0xa3/0x110 tcp_send_ack+0x1d/0x20 tcp_rcv_state_process+0xe64/0xe80 ? tcp_v6_connect+0x5d1/0x5f0 tcp_v6_do_rcv+0x1b1/0x3f0 ? tcp_v6_do_rcv+0x1b1/0x3f0 __release_sock+0x7f/0xd0 release_sock+0x30/0xa0 __inet_stream_connect+0x1c3/0x3b0 ? prepare_to_wait+0xb0/0xb0 inet_stream_connect+0x3b/0x60 __sys_connect+0x101/0x120 ? __sys_getsockopt+0x11b/0x140 __x64_sys_connect+0x1a/0x20 do_syscall_64+0x51/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The stack trace of mem_cgroup_sk_alloc() from IRQ-context: Fixes: 2d758073 ("mm: memcontrol: consolidate cgroup socket tracking") Fixes: d979a39d ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by:
Shakeel Butt <shakeelb@google.com> Reviewed-by:
Roman Gushchin <guro@fb.com> Signed-off-by:
-
Eric Dumazet authored
commit b7469e83 upstream. Similar to commit 38f88c45 ("bonding/alb: properly access headers in bond_alb_xmit()"), we need to make sure arp header was pulled in skb->head before blindly accessing it in rlb_arp_xmit(). Remove arp_pkt() private helper, since it is more readable/obvious to have the following construct back to back : if (!pskb_network_may_pull(skb, sizeof(*arp))) return NULL; arp = (struct arp_pkt *)skb_network_header(skb); syzbot reported : BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline] BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 bond_slave_has_mac_rx include/net/bonding.h:704 [inline] rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline] bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282 __netdev_start_xmit include/linux/netdevice.h:4524 [inline] netdev_start_xmit include/linux/netdevice.h:4538 [inline] xmit_one net/core/dev.c:3470 [inline] dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096 packet_snd net/packet/af_packet.c:2967 [inline] packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479 RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003 RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 packet_alloc_skb net/packet/af_packet.c:2815 [inline] packet_snd net/packet/af_packet.c:2910 [inline] packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 110a40df ] Before accessing various fields in IPV4 network header and TCP header, make sure the packet : - Has IP version 4 (ip->version == 4) - Has not a silly network length (ip->ihl >= 5) - Is big enough to hold network and transport headers - Has not a silly TCP header size (th->doff >= sizeof(struct tcphdr) / 4) syzbot reported : BUG: KMSAN: uninit-value in slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 CPU: 0 PID: 11728 Comm: syz-executor231 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 slhc_compress+0x5b9/0x2e60 drivers/net/slip/slhc.c:270 ppp_send_frame drivers/net/ppp/ppp_generic.c:1637 [inline] __ppp_xmit_process+0x1902/0x2970 drivers/net/ppp/ppp_generic.c:1495 ppp_xmit_process+0x147/0x2f0 drivers/net/ppp/ppp_generic.c:1516 ppp_write+0x6bb/0x790 drivers/net/ppp/ppp_generic.c:512 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f7cd99 Code: 90 e8 0b 00 00 00 f3 90 0f ae e8 eb f9 8d 74 26 00 89 3c 24 c3 90 90 90 90 90 90 90 90 90 90 90 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 eb 0d 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 002b:00000000ffdb84ac EFLAGS: 00000217 ORIG_RAX: 000000000000014e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00000000200001c0 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000040047459 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] ppp_write+0x115/0x790 drivers/net/ppp/ppp_generic.c:500 do_loop_readv_writev fs/read_write.c:717 [inline] do_iter_write+0x812/0xdc0 fs/read_write.c:1000 compat_writev+0x2df/0x5a0 fs/read_write.c:1351 do_compat_pwritev64 fs/read_write.c:1400 [inline] __do_compat_sys_pwritev fs/read_write.c:1420 [inline] __se_compat_sys_pwritev fs/read_write.c:1414 [inline] __ia32_compat_sys_pwritev+0x349/0x3f0 fs/read_write.c:1414 do_syscall_32_irqs_on arch/x86/entry/common.c:339 [inline] do_fast_syscall_32+0x3c7/0x6e0 arch/x86/entry/common.c:410 entry_SYSENTER_compat+0x68/0x77 arch/x86/entry/entry_64_compat.S:139 Fixes: b5451d78 ("slip: Move the SLIP drivers") Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit ab14961d ] fec_enet_set_coalesce() validates the previously set params and if they are within range proceeds to apply the new ones. The new ones, however, are not validated. This seems backwards, probably a copy-paste error? Compile tested only. Fixes: d851b47b ("net: fec: add interrupt coalescence feature support") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit ce9a4186 ] The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca155 ("macvlan: Move broadcasts into a work queue") Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
Mahesh Bandewar authored
[ Upstream commit ad819276 ] IPvlan in L3 mode discards outbound multicast packets but performs the check before ensuring the ether-header is set or not. This is an error that Eric found through code browsing. Fixes: 2ad7bf36 (“ipvlan: Initial check-in of the IPVLAN driver.”) Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit afe207d8 ] Commit e18b353f ("ipvlan: add cond_resched_rcu() while processing muticast backlog") added a cond_resched_rcu() in a loop using rcu protection to iterate over slaves. This is breaking rcu rules, so lets instead use cond_resched() at a point we can reschedule Fixes: e18b353f ("ipvlan: add cond_resched_rcu() while processing muticast backlog") Signed-off-by:
-
Paolo Abeni authored
commit cccc200f upstream. Currently, if IPv6 is enabled on top of an ipvlan device in l3 mode, the following warning message: Dropped {multi|broad}cast of type= [86dd] is emitted every time that a RS is generated and dmseg is soon filled with irrelevant messages. Replace pr_warn with pr_debug, to preserve debuggability, without scaring the sysadmin. Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Jiri Wiesner authored
[ Upstream commit 63aae7b1 ] There is a problem when ipvlan slaves are created on a master device that is a vmxnet3 device (ipvlan in VMware guests). The vmxnet3 driver does not support unicast address filtering. When an ipvlan device is brought up in ipvlan_open(), the ipvlan driver calls dev_uc_add() to add the hardware address of the vmxnet3 master device to the unicast address list of the master device, phy_dev->uc. This inevitably leads to the vmxnet3 master device being forced into promiscuous mode by __dev_set_rx_mode(). Promiscuous mode is switched on the master despite the fact that there is still only one hardware address that the master device should use for filtering in order for the ipvlan device to be able to receive packets. The comment above struct net_device describes the uc_promisc member as a "counter, that indicates, that promiscuous mode has been enabled due to the need to listen to additional unicast addresses in a device that does not implement ndo_set_rx_mode()". Moreover, the design of ipvlan guarantees that only the hardware address of a master device, phy_dev->dev_addr, will be used to transmit and receive all packets from its ipvlan slaves. Thus, the unicast address list of the master device should not be modified by ipvlan_open() and ipvlan_stop() in order to make ipvlan a workable option on masters that do not support unicast address filtering. Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver") Reported-by:
Per Sundstrom <per.sundstrom@redqube.se> Signed-off-by:
Jiri Wiesner <jwiesner@suse.com> Reviewed-by:
-
Mahesh Bandewar authored
[ Upstream commit e18b353f ] If there are substantial number of slaves created as simulated by Syzbot, the backlog processing could take much longer and result into the issue found in the Syzbot report. INFO: rcu_sched detected stalls on CPUs/tasks: (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752) All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0 syz-executor.1 R running task on cpu 1 10984 11210 3866 0x30020008 179034491270 Call Trace: <IRQ> [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline] [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline] [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline] [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline] [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline] [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline] [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline] [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153 RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12 RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000 RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0 RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273 R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8 R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline] [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline] [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline] [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline] [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline] [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline] [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline] [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102 RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12 RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000 RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005 RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000 R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline] [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline] [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f23c69 RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0 RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1 rcu_sched R running task on cpu 1 13048 8 2 0x90000000 179099587640 Call Trace: [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393 Fixes: ba35f858 (“ipvlan: Defer multicast / broadcast processing to a work-queue”) Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit 6ba3da44 ] Add missing attribute validation for vendor subcommand attributes to the netlink policy. Fixes: 9e58095f ("NFC: netlink: Implement vendor command support") Signed-off-by:
-
