- 25 Oct, 2015 40 commits
-
-
Punit Vara authored
This patch is to the host_interface.c file that fixes up following warning reported by coccicheck: WARNING: Comparison to bool Boolean tests do not need explicit comparison to true or false Signed-off-by:
Punit Vara <punitvara@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Amitoj Kaur Chawla authored
Deletes the jump to a label on the next line when the label isn't used anywhere else. The semantic patch used to find this is: // <smpl> @r@ identifier l; @@ -if (...) goto l; -l: // </smpl> Signed-off-by:
Amitoj Kaur Chawla <amitoj1606@gmail.com> Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. <smpl> @timer@ expression e1,e2,e3,fn_ptr; @@ -init_timer(&e1); +setup_timer(&e1, fn_ptr, e2); ... when != fn_ptr = e3 -e1.function = fn_ptr; -e1.data = e2; </smpl> Signed-off-by:
Muhammad Falak R Wani <falakreyaz@gmail.com> Signed-off-by:
-
Eva Rachel Retuya authored
Replace all instances of bit shifting on 1 with the BIT(x) macro. In addition, convert other non-1 shift operations with the equivalent BIT(x) macro for uniformity. Issue pointed out by checkpatch. CHECK: Prefer using the BIT macro Signed-off-by:
Eva Rachel Retuya <eraretuya@gmail.com> Signed-off-by:
-
Eva Rachel Retuya authored
Use 'usleep_range' instead of 'udelay' to elapse time. For spinand_reset, define the upper limit by a factor of 2 to keep the wait short while still allowing a "good enough" range for wakeup. Define the range 250us - 1ms for spinand_cmdfunc to provide enough leeway before issuing spinand_reset. Checkpatch found this issue. CHECK: usleep_range is preferred over udelay; see Documentation/timers/timers-howto.txt Signed-off-by:
-
Muhammad Falak R Wani authored
Use of the timer API function setup_timer instead of init_timer, removing the structure field assignments, and make the codeflow more readable. The simplified sematic patch used is :- <smpl> @timer@ expression e1,e2,e3,fn_ptr; @@ -init_timer(&e1); +setup_timer(&e1, fn_ptr, e2); ... when != fn_ptr = e3 -e1.function = fn_ptr; -e1.data = e2; </smpl> Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. Signed-off-by:
-
Muhammad Falak R Wani authored
Use the timer API function setup_timer instead of init_timer, removing the structure field assignments. The simplified semantic patch used is :- <smpl> @timer@ expression e1,e2,e3,fn_ptr; @@ -init_timer(&e1); +setup_timer(&e1, fn_ptr, e2); ... when != fn_ptr = e3 -e1.function = fn_ptr; -e1.data = e2; </smpl> Signed-off-by:
-
Alison Schofield authored
Remove extern declaration and add include of header file to get same. Addresses checkpatch.pl: WARNING: externs should be avoided in .c files Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Signed-off-by:
-
Alison Schofield authored
Replace explicit NULL comparison with ! operator to simplify code. Addresses checkpatch.pl: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by:
-
Alison Schofield authored
Reworked comments per kernel coding style to improve readability. Corrects checkpatch.pl: WARNING: Block comments use * on subsequent lines WARNING: line over 80 characters Signed-off-by:
-
Burcin Akalin authored
Remove multiple blank lines. Problem found using checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
Burcin Akalin <brcnakalin@gmail.com> Signed-off-by:
-
Burcin Akalin authored
Remove multiple assignments by factorizing them.Problem found using checkpatch.pl CHECK: multiple assignments should be avoided Signed-off-by:
-
Amitoj Kaur Chawla authored
This patch removes unnecessary braces around if-else single statement blocks and unnecessary tab space aligning Tool used is uncrustify. Signed-off-by:
-
Shraddha Barke authored
Introduce the use of function put_unaligned_le32. A simplified version of Coccinelle semantic patch used - @@ identifier tmp; expression ptr; expression y,e; type T; @@ - tmp = cpu_to_le32(y); <+... when != tmp - memcpy(ptr, (T)&tmp, ...); + put_unaligned_le32(y,ptr); ...+> ? tmp = e @@ type T; identifier tmp; @@ - T tmp; ...when != tmp Signed-off-by:
Shraddha Barke <shraddha.6596@gmail.com> Signed-off-by:
-
Dennis Menschel authored
This patch fixes some internal voltage settings for the C-Berry28 display. The original example source files for the C-Berry28 as provided by its vendor admatec contained six issues where a command parameter's value didn't match its corresponding comment. I've informed admatec about these discrepancies on 2015-08-25. In the meantime, I've assumed the comments to be more reliable than the code, and thus have used these values to write the initial C-Berry28 driver. After having received a reply from admatec on 2015-10-16 that the issues have been fixed in their example code, it has turned out that for the voltages VCOM and AVDD, the code was indeed correct, but the comments were wrong. This patch is meant to fix these two pending mistakes. Signed-off-by:
Dennis Menschel <menschel-d@posteo.de> Signed-off-by:
-
Dennis Menschel authored
This patch converts the default init sequence of the ST7789V display controller into an init function, as init sequences are considered deprecated by the maintainers of fbtft. Signed-off-by:
-
Dennis Menschel authored
This patch removes the function set_addr_win() from fb_st7789v.c, as its definition is redundant to the default implementation fbtft_set_addr_win() which can be found in fbtft-core.c. Signed-off-by:
-
Dennis Menschel authored
This patch makes use of the standard MIPI Display Command Set to remove redundant entries from the command enum of the ST7789V display controller and also some of the magic constants found in the init sequence of the C-Berry28 display. Signed-off-by:
-
Alison Schofield authored
Add local variable scanned_queue to rtw_createbss_cmd23a_callback() and use it (5x) to simplify references. Addresses checkpatch.pl WARNING: line over 80 characters Signed-off-by:
-
Alison Schofield authored
Move constant to right of comparison test to improve readability. Addresses checkpatch.pl: WARNING: Comparisons should place the constant on the right side of the test Signed-off-by:
-
Alison Schofield authored
Replace printk() with netdev_err() for uniform error reporting. Issue found by checkpatch. Signed-off-by:
-
Burcin Akalin authored
Add space around operator '*'. Problem found using checkpatch.pl CHECK: spaces preferred around that '*' (ctx:VxV) Signed-off-by:
-
Burcin Akalin authored
Add space around operator '*'. Problem found using checkpatch.pl CHECK: spaces preferred around that '*' (ctx:VxV) Signed-off-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Luis de Bethencourt authored
For loop is outside of the else branch of the above conditional statement. Fixing misleading indentation. Fix a smatch warning: drivers/staging/rtl8723au/core/rtw_wlan_util.c:528 WMMOnAssocRsp23a() warn: curly braces intended? Signed-off-by:
Luis de Bethencourt <luisbg@osg.samsung.com> Acked-by:
Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by:
-
Cristina Moraru authored
Replace kmalloc with specialized function kmalloc_array when the size is a multiplication of: number_of_elements * size_of_element Signed-off-by:
Cristina Moraru <cristina.moraru09@gmail.com> Signed-off-by:
-
Burcin Akalin authored
Remove multiple blank lines. Problem found using checkpatch.pl "CHECK: Please don't use multiple blank lines" Signed-off-by:
-
Ioana Ciornei authored
This patch adds spaces around binary operator '|'. Done with coccinelle semantic patch: @@ identifier x, y, z; @@ ( - x|y|z + x | y | z | - x|y + x | y ) Signed-off-by:
Ioana Ciornei <ciorneiioana@gmail.com> Signed-off-by:
-
Ioana Ciornei authored
This patch removes unnecessary brackets when dealing with unary operators like '&'. Done with coccinelle semantic patch: @@ expression e; @@ ( - &(e) + &e ) Signed-off-by:
-
Ioana Ciornei authored
This patch removes unnecessary spaces after the cast. Patch done with coccinelle semantic patch: @rule0@ type t; identifier e; constant c; expression expr; @@ ( - (t) e + (t)e | - (t) c + (t)c | - (t) expr + (t)expr ) Signed-off-by:
-
Ioana Ciornei authored
Indent parameters and arguments passed to function calls to match open paranthesis Signed-off-by:
-
Ioana Ciornei authored
This patch removes the unnecessary blank lines before a closed bracket and after an open bracket. Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
Cristina Moraru authored
Remove comparisons to 0 or NULL Signed-off-by:
-
