1. 11 Feb, 2014 13 commits
    • Kevin Hao's avatar
      powerpc/ppc32: Fix the bug in the init of non-base exception stack for UP · 04a34113
      Kevin Hao authored
      We would allocate one specific exception stack for each kind of
      non-base exceptions for every CPU. For ppc32 the CPU hard ID is
      used as the subscript to get the specific exception stack for
      one CPU. But for an UP kernel, there is only one element in the
      each kind of exception stack array. We would get stuck if the
      CPU hard ID is not equal to '0'. So in this case we should use the
      subscript '0' no matter what the CPU hard ID is.
      Signed-off-by: default avatarKevin Hao <haokexin@gmail.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      04a34113
    • Michael Ellerman's avatar
      powerpc/xmon: Don't signal we've entered until we're finished printing · d2b496e5
      Michael Ellerman authored
      Currently we set our cpu's bit in cpus_in_xmon, and then we take the
      output lock and print the exception information.
      
      This can race with the master cpu entering the command loop and printing
      the backtrace. The result is that the backtrace gets garbled with
      another cpu's exception print out.
      
      Fix it by delaying the set of cpus_in_xmon until we are finished
      printing.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      d2b496e5
    • Michael Ellerman's avatar
      powerpc/xmon: Fix timeout loop in get_output_lock() · 15075897
      Michael Ellerman authored
      As far as I can tell, our 70s era timeout loop in get_output_lock() is
      generating no code.
      
      This leads to the hostile takeover happening more or less simultaneously
      on all cpus. The result is "interesting", some example output that is
      more readable than most:
      
          cpu 0x1: Vector: 100 (Scypsut e0mx bR:e setV)e catto xc0p:u[ c 00
          c0:0  000t0o0V0erc0td:o5 rfc28050000]0c00 0 0  0 6t(pSrycsV1ppuot
          uxe 1m 2 0Rx21e3:0s0ce000c00000t00)00 60602oV2SerucSayt0y 0p 1sxs
      
      Fix it by using udelay() in the timeout loop. The wait time and check
      frequency are arbitrary, but seem to work OK. We already rely on
      udelay() working so this is not a new dependency.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      15075897
    • Michael Ellerman's avatar
      powerpc/xmon: Don't loop forever in get_output_lock() · 730efb61
      Michael Ellerman authored
      If we enter with xmon_speaker != 0 we skip the first cmpxchg(), we also
      skip the while loop because xmon_speaker != last_speaker (0) - meaning we
      skip the second cmpxchg() also.
      
      Following that code path the compiler sees no memory barriers and so is
      within its rights to never reload xmon_speaker. The end result is we loop
      forever.
      
      This manifests as all cpus being in xmon ('c' command), but they refuse
      to take control when you switch to them ('c x' for cpu # x).
      
      I have seen this deadlock in practice and also checked the generated code to
      confirm this is what's happening.
      
      The simplest fix is just to always try the cmpxchg().
      Signed-off-by: default avatarMichael Ellerman <michael@ellerman.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      730efb61
    • Anshuman Khandual's avatar
      powerpc/perf: Configure BHRB filter before enabling PMU interrupts · b4d6c06c
      Anshuman Khandual authored
      Right now the config_bhrb() PMU specific call happens after
      write_mmcr0(), which actually enables the PMU for event counting and
      interrupts. So there is a small window of time where the PMU and BHRB
      runs without the required HW branch filter (if any) enabled in BHRB.
      
      This can cause some of the branch samples to be collected through BHRB
      without any filter applied and hence affects the correctness of
      the results. This patch moves the BHRB config function call before
      enabling interrupts.
      
      Here are some data points captured via trace prints which depicts how we
      could get PMU interrupts with BHRB filter NOT enabled with a standard
      perf record command line (asking for branch record information as well).
      
          $ perf record -j any_call ls
      
      Before the patch:-
      
          ls-1962  [003] d...  2065.299590: .perf_event_interrupt: MMCRA: 40000000000
          ls-1962  [003] d...  2065.299603: .perf_event_interrupt: MMCRA: 40000000000
          ...
      
          All the PMU interrupts before this point did not have the requested
          HW branch filter enabled in the MMCRA.
      
          ls-1962  [003] d...  2065.299647: .perf_event_interrupt: MMCRA: 40040000000
          ls-1962  [003] d...  2065.299662: .perf_event_interrupt: MMCRA: 40040000000
      
      After the patch:-
      
          ls-1850  [008] d...   190.311828: .perf_event_interrupt: MMCRA: 40040000000
          ls-1850  [008] d...   190.311848: .perf_event_interrupt: MMCRA: 40040000000
      
          All the PMU interrupts have the requested HW BHRB branch filter
          enabled in MMCRA.
      Signed-off-by: default avatarAnshuman Khandual <khandual@linux.vnet.ibm.com>
      [mpe: Fixed up whitespace and cleaned up changelog]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      b4d6c06c
    • Nathan Fontenot's avatar
      crypto/nx/nx-842: Fix handling of vmalloc addresses · 0ba3e101
      Nathan Fontenot authored
      The powerpc specific nx-842 compression driver does not currently
      handle translating a vmalloc address to a physical address.
      
      The current driver uses __pa() for all addresses which does not
      properly handle vmalloc addresses and thus causes a failure since
      we do not pass a proper physical address to the hypervisor.
      
      This patch adds a routine to convert an address to a physical
      address by checking for vmalloc addresses and handling them properly.
      Signed-off-by: default avatarNathan Fontenot <nfont@linux.vnet.ibm.com>
       ---
       drivers/crypto/nx/nx-842.c |   29 +++++++++++++++++++----------
       1 file changed, 19 insertions(+), 10 deletions(-)
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      0ba3e101
    • Michael Ellerman's avatar
      powerpc/pseries: Select ARCH_RANDOM on pseries · 8d4887ee
      Michael Ellerman authored
      We have a driver for the ARCH_RANDOM hook in rng.c, so we should select
      ARCH_RANDOM on pseries.
      
      Without this the build breaks if you turn ARCH_RANDOM off.
      
      This hasn't broken the build because pseries_defconfig doesn't specify a
      value for PPC_POWERNV, which is default y, and selects ARCH_RANDOM.
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8d4887ee
    • Michael Ellerman's avatar
    • Laurent Dufour's avatar
      powerpc/relocate fix relocate processing in LE mode · 3b830c82
      Laurent Dufour authored
      Relocation's code is not working in little endian mode because the r_info
      field, which is a 64 bits value, should be read from the right offset.
      
      The current code is optimized to read the r_info field as a 32 bits value
      starting at the middle of the double word (offset 12). When running in LE
      mode, the read value is not correct since only the MSB is read.
      
      This patch removes this optimization which consist to deal with a 32 bits
      value instead of a 64 bits one. This way it works in big and little endian
      mode.
      Signed-off-by: default avatarLaurent Dufour <ldufour@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      3b830c82
    • Mahesh Salgaonkar's avatar
      powerpc: Fix kdump hang issue on p8 with relocation on exception enabled. · 429d2e83
      Mahesh Salgaonkar authored
      On p8 systems, with relocation on exception feature enabled we are seeing
      kdump kernel hang at interrupt vector 0xc*4400. The reason is, with this
      feature enabled, exception are raised with MMU (IR=DR=1) ON with the
      default offset of 0xc*4000. Since exception is raised in virtual mode it
      requires the vector region to be executable without which it fails to
      fetch and execute instruction at 0xc*4xxx. For default kernel since kernel
      is loaded at real 0, the htab mappings sets the entire kernel text region
      executable. But for relocatable kernel (e.g. kdump case) we only copy
      interrupt vectors down to real 0 and never marked that region as
      executable because in p7 and below we always get exception in real mode.
      
      This patch fixes this issue by marking htab mapping range as executable
      that overlaps with the interrupt vector region for relocatable kernel.
      
      Thanks to Ben who helped me to debug this issue and find the root cause.
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      429d2e83
    • Mahesh Salgaonkar's avatar
      powerpc/pseries: Disable relocation on exception while going down during crash. · 3ec8b78f
      Mahesh Salgaonkar authored
      Disable relocation on exception while going down even in kdump case. This
      is because we are about clear htab mappings while kexec-ing into kdump
      kernel and we may run into issues if we still have AIL ON.
      Signed-off-by: default avatarMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      3ec8b78f
    • Thadeu Lima de Souza Cascardo's avatar
      powerpc/eeh: Drop taken reference to driver on eeh_rmv_device · 8cc6b6cd
      Thadeu Lima de Souza Cascardo authored
      Commit f5c57710 ("powerpc/eeh: Use
      partial hotplug for EEH unaware drivers") introduces eeh_rmv_device,
      which may grab a reference to a driver, but not release it.
      
      That prevents a driver from being removed after it has gone through EEH
      recovery.
      
      This patch drops the reference if it was taken.
      Signed-off-by: default avatarThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
      Acked-by: default avatarGavin Shan <shangw@linux.vnet.ibm.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      8cc6b6cd
    • Paul Gortmaker's avatar
      powerpc: Fix build failure in sysdev/mpic.c for MPIC_WEIRD=y · 0215b4aa
      Paul Gortmaker authored
      Commit 446f6d06 ("powerpc/mpic: Properly
      set default triggers") breaks the mpc7447_hpc_defconfig as follows:
      
        CC      arch/powerpc/sysdev/mpic.o
      arch/powerpc/sysdev/mpic.c: In function 'mpic_set_irq_type':
      arch/powerpc/sysdev/mpic.c:886:9: error: case label does not reduce to an integer constant
      arch/powerpc/sysdev/mpic.c:890:9: error: case label does not reduce to an integer constant
      arch/powerpc/sysdev/mpic.c:894:9: error: case label does not reduce to an integer constant
      arch/powerpc/sysdev/mpic.c:898:9: error: case label does not reduce to an integer constant
      
      Looking at the cpp output (gcc 4.7.3), I see:
      
         case mpic->hw_set[MPIC_IDX_VECPRI_SENSE_EDGE] |
              mpic->hw_set[MPIC_IDX_VECPRI_POLARITY_POSITIVE]:
      
      The pointer into an array appears because CONFIG_MPIC_WEIRD=y is set
      for this platform, thus enabling the following:
      
        -------------------
        #ifdef CONFIG_MPIC_WEIRD
        static u32 mpic_infos[][MPIC_IDX_END] = {
              [0] = { /* Original OpenPIC compatible MPIC */
      
        [...]
      
        #define MPIC_INFO(name) mpic->hw_set[MPIC_IDX_##name]
      
        #else /* CONFIG_MPIC_WEIRD */
      
        #define MPIC_INFO(name) MPIC_##name
      
        #endif /* CONFIG_MPIC_WEIRD */
        -------------------
      
      Here we convert the case section to if/else if, and also add
      the equivalent of a default case to warn about unknown types.
      Boot tested on sbc8548, build tested on all defconfigs.
      Signed-off-by: default avatarPaul Gortmaker <paul.gortmaker@windriver.com>
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      0215b4aa
  2. 10 Feb, 2014 4 commits
  3. 09 Feb, 2014 9 commits
    • Al Viro's avatar
      fix a kmap leak in virtio_console · c9efe511
      Al Viro authored
      While we are at it, don't do kmap() under kmap_atomic(), *especially*
      for a page we'd allocated with GFP_KERNEL.  It's spelled "page_address",
      and had that been more than that, we'd have a real trouble - kmap_high()
      can block, and doing that while holding kmap_atomic() is a Bad Idea(tm).
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      c9efe511
    • Al Viro's avatar
      fix O_SYNC|O_APPEND syncing the wrong range on write() · d311d79d
      Al Viro authored
      It actually goes back to 2004 ([PATCH] Concurrent O_SYNC write support)
      when sync_page_range() had been introduced; generic_file_write{,v}() correctly
      synced
      	pos_after_write - written .. pos_after_write - 1
      but generic_file_aio_write() synced
      	pos_before_write .. pos_before_write + written - 1
      instead.  Which is not the same thing with O_APPEND, obviously.
      A couple of years later correct variant had been killed off when
      everything switched to use of generic_file_aio_write().
      
      All users of generic_file_aio_write() are affected, and the same bug
      has been copied into other instances of ->aio_write().
      
      The fix is trivial; the only subtle point is that generic_write_sync()
      ought to be inlined to avoid calculations useless for the majority of
      calls.
      Signed-off-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
      d311d79d
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs · 9c1db779
      Linus Torvalds authored
      Pull btrfs fixes from Chris Mason:
       "This is a small collection of fixes"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
        Btrfs: fix data corruption when reading/updating compressed extents
        Btrfs: don't loop forever if we can't run because of the tree mod log
        btrfs: reserve no transaction units in btrfs_ioctl_set_features
        btrfs: commit transaction after setting label and features
        Btrfs: fix assert screwup for the pending move stuff
      9c1db779
    • Linus Torvalds's avatar
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · 6f2a1c1e
      Linus Torvalds authored
      Pull perf fixes from Ingo Molnar:
       "Tooling fixes, mostly related to the KASLR fallout, but also other
        fixes"
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        perf buildid-cache: Check relocation when checking for existing kcore
        perf tools: Adjust kallsyms for relocated kernel
        perf tests: No need to set up ref_reloc_sym
        perf symbols: Prevent the use of kcore if the kernel has moved
        perf record: Get ref_reloc_sym from kernel map
        perf machine: Set up ref_reloc_sym in machine__create_kernel_maps()
        perf machine: Add machine__get_kallsyms_filename()
        perf tools: Add kallsyms__get_function_start()
        perf symbols: Fix symbol annotation for relocated kernel
        perf tools: Fix include for non x86 architectures
        perf tools: Fix AAAAARGH64 memory barriers
        perf tools: Demangle kernel and kernel module symbols too
        perf/doc: Remove mention of non-existent set_perf_event_pending() from design.txt
      6f2a1c1e
    • Filipe David Borba Manana's avatar
      Btrfs: fix data corruption when reading/updating compressed extents · a2aa75e1
      Filipe David Borba Manana authored
      When using a mix of compressed file extents and prealloc extents, it
      is possible to fill a page of a file with random, garbage data from
      some unrelated previous use of the page, instead of a sequence of zeroes.
      
      A simple sequence of steps to get into such case, taken from the test
      case I made for xfstests, is:
      
         _scratch_mkfs
         _scratch_mount "-o compress-force=lzo"
         $XFS_IO_PROG -f -c "pwrite -S 0x06 -b 18670 266978 18670" $SCRATCH_MNT/foobar
         $XFS_IO_PROG -c "falloc 26450 665194" $SCRATCH_MNT/foobar
         $XFS_IO_PROG -c "truncate 542872" $SCRATCH_MNT/foobar
         $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foobar
      
      This results in the following file items in the fs tree:
      
         item 4 key (257 INODE_ITEM 0) itemoff 15879 itemsize 160
             inode generation 6 transid 6 size 542872 block group 0 mode 100600
         item 5 key (257 INODE_REF 256) itemoff 15863 itemsize 16
             inode ref index 2 namelen 6 name: foobar
         item 6 key (257 EXTENT_DATA 0) itemoff 15810 itemsize 53
             extent data disk byte 0 nr 0 gen 6
             extent data offset 0 nr 24576 ram 266240
             extent compression 0
         item 7 key (257 EXTENT_DATA 24576) itemoff 15757 itemsize 53
             prealloc data disk byte 12849152 nr 241664 gen 6
             prealloc data offset 0 nr 241664
         item 8 key (257 EXTENT_DATA 266240) itemoff 15704 itemsize 53
             extent data disk byte 12845056 nr 4096 gen 6
             extent data offset 0 nr 20480 ram 20480
             extent compression 2
         item 9 key (257 EXTENT_DATA 286720) itemoff 15651 itemsize 53
             prealloc data disk byte 13090816 nr 405504 gen 6
             prealloc data offset 0 nr 258048
      
      The on disk extent at offset 266240 (which corresponds to 1 single disk block),
      contains 5 compressed chunks of file data. Each of the first 4 compress 4096
      bytes of file data, while the last one only compresses 3024 bytes of file data.
      Therefore a read into the file region [285648 ; 286720[ (length = 4096 - 3024 =
      1072 bytes) should always return zeroes (our next extent is a prealloc one).
      
      The solution here is the compression code path to zero the remaining (untouched)
      bytes of the last page it uncompressed data into, as the information about how
      much space the file data consumes in the last page is not known in the upper layer
      fs/btrfs/extent_io.c:__do_readpage(). In __do_readpage we were correctly zeroing
      the remainder of the page but only if it corresponds to the last page of the inode
      and if the inode's size is not a multiple of the page size.
      
      This would cause not only returning random data on reads, but also permanently
      storing random data when updating parts of the region that should be zeroed.
      For the example above, it means updating a single byte in the region [285648 ; 286720[
      would store that byte correctly but also store random data on disk.
      
      A test case for xfstests follows soon.
      Signed-off-by: default avatarFilipe David Borba Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      a2aa75e1
    • Josef Bacik's avatar
      Btrfs: don't loop forever if we can't run because of the tree mod log · 27a377db
      Josef Bacik authored
      A user reported a 100% cpu hang with my new delayed ref code.  Turns out I
      forgot to increase the count check when we can't run a delayed ref because of
      the tree mod log.  If we can't run any delayed refs during this there is no
      point in continuing to look, and we need to break out.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      27a377db
    • David Sterba's avatar
      btrfs: reserve no transaction units in btrfs_ioctl_set_features · 8051aa1a
      David Sterba authored
      Added in patch "btrfs: add ioctls to query/change feature bits online"
      modifications to superblock don't need to reserve metadata blocks when
      starting a transaction.
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      8051aa1a
    • Jeff Mahoney's avatar
      btrfs: commit transaction after setting label and features · d0270aca
      Jeff Mahoney authored
      The set_fslabel ioctl uses btrfs_end_transaction, which means it's
      possible that the change will be lost if the system crashes, same for
      the newly set features. Let's use btrfs_commit_transaction instead.
      Signed-off-by: default avatarJeff Mahoney <jeffm@suse.com>
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.cz>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      d0270aca
    • Josef Bacik's avatar
      Btrfs: fix assert screwup for the pending move stuff · 6cc98d90
      Josef Bacik authored
      Wang noticed that he was failing btrfs/030 even though me and Filipe couldn't
      reproduce.  Turns out this is because Wang didn't have CONFIG_BTRFS_ASSERT set,
      which meant that a key part of Filipe's original patch was not being built in.
      This appears to be a mess up with merging Filipe's patch as it does not exist in
      his original patch.  Fix this by changing how we make sure del_waiting_dir_move
      asserts that it did not error and take the function out of the ifdef check.
      This makes btrfs/030 pass with the assert on or off.  Thanks,
      Signed-off-by: default avatarJosef Bacik <jbacik@fb.com>
      Reviewed-by: default avatarFilipe Manana <fdmanana@gmail.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      6cc98d90
  4. 08 Feb, 2014 6 commits
  5. 07 Feb, 2014 8 commits
    • Linus Torvalds's avatar
      Merge tag 'driver-core-3.14-rc2' of... · 34a9bff4
      Linus Torvalds authored
      Merge tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
      
      Pull driver core fix from Greg KH:
       "Here is a single kernfs fix to resolve a much-reported lockdep issue
        with the removal of entries in sysfs"
      
      * tag 'driver-core-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
        kernfs: make kernfs_deactivate() honor KERNFS_LOCKDEP flag
      34a9bff4
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client · 41f76d8b
      Linus Torvalds authored
      Pull ceph fixes from Sage Weil:
       "There is an RBD fix for a crash due to the immutable bio changes, an
        error path fix, and a locking fix in the recent redirect support"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
        libceph: do not dereference a NULL bio pointer
        libceph: take map_sem for read in handle_reply()
        libceph: factor out logic from ceph_osdc_start_request()
        libceph: fix error handling in ceph_osdc_init()
      41f76d8b
    • Linus Torvalds's avatar
      Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux · 42be3f35
      Linus Torvalds authored
      Pull arm64 fixes from Catalin Marinas:
       - Relax VDSO alignment requirements so that the kernel-picked one (4K)
         does not conflict with the dynamic linker's one (64K)
       - VDSO gettimeofday fix
       - Barrier fixes for atomic operations and cache flushing
       - TLB invalidation when overriding early page mappings during boot
       - Wired up new 32-bit arm (compat) syscalls
       - LSM_MMAP_MIN_ADDR when COMPAT is enabled
       - defconfig update
       - Clean-up (comments, pgd_alloc).
      
      * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
        arm64: defconfig: Expand default enabled features
        arm64: asm: remove redundant "cc" clobbers
        arm64: atomics: fix use of acquire + release for full barrier semantics
        arm64: barriers: allow dsb macro to take option parameter
        security: select correct default LSM_MMAP_MIN_ADDR on arm on arm64
        arm64: compat: Wire up new AArch32 syscalls
        arm64: vdso: update wtm fields for CLOCK_MONOTONIC_COARSE
        arm64: vdso: fix coarse clock handling
        arm64: simplify pgd_alloc
        arm64: fix typo: s/SERRROR/SERROR/
        arm64: Invalidate the TLB when replacing pmd entries during boot
        arm64: Align CMA sizes to PAGE_SIZE
        arm64: add DSB after icache flush in __flush_icache_all()
        arm64: vdso: prevent ld from aligning PT_LOAD segments to 64k
      42be3f35
    • Linus Torvalds's avatar
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · d94d0e27
      Linus Torvalds authored
      Pull MIPS updates from Ralf Baechle:
       "hree minor patches.  All have sat in -next for a few days"
      
      * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
        MIPS: fpu.h: Fix build when CONFIG_BUG is not set
        MIPS: Wire up sched_setattr/sched_getattr syscalls
        MIPS: Alchemy: Fix DB1100 GPIO registration
      d94d0e27
    • Linus Torvalds's avatar
      Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · 3e382dd9
      Linus Torvalds authored
      Pull media fixes from Mauro Carvalho Chehab:
       "A series of small fixes.  Mostly driver ones.  There is one core
        regression fix on a patch that was meant to fix some race issues on
        vb2, but that actually caused more harm than good.  So, we're just
        reverting it for now"
      
      * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
        [media] adv7842: Composite free-run platfrom-data fix
        [media] v4l2-dv-timings: fix GTF calculation
        [media] hdpvr: Fix memory leak in debug
        [media] af9035: add ID [2040:f900] Hauppauge WinTV-MiniStick 2
        [media] mxl111sf: Fix compile when CONFIG_DVB_USB_MXL111SF is unset
        [media] mxl111sf: Fix unintentional garbage stack read
        [media] cx24117: use a valid dev pointer for dev_err printout
        [media] cx24117: remove dead code in always 'false' if statement
        [media] update Michael Krufky's email address
        [media] vb2: Check if there are buffers before streamon
        [media] Revert "[media] videobuf_vm_{open,close} race fixes"
        [media] go7007-loader: fix usb_dev leak
        [media] media: bt8xx: add missing put_device call
        [media] exynos4-is: Compile in fimc-lite runtime PM callbacks conditionally
        [media] exynos4-is: Compile in fimc runtime PM callbacks conditionally
        [media] exynos4-is: Fix error paths in probe() for !pm_runtime_enabled()
        [media] s5p-jpeg: Fix wrong NV12 format parameters
        [media] s5k5baf: allow to handle arbitrary long i2c sequences
      3e382dd9
    • Linus Torvalds's avatar
      Merge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging · 2091f435
      Linus Torvalds authored
      Pull hwmon fixes from Guenter Roeck:
       "Fix PMBus driver problem with some multi-page voltage sensors and fix
        da9055 interrupt initialization"
      
      * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
        hwmon: (da9055) Remove use of regmap_irq_get_virq()
        hwmon: (pmbus) Support per-page exponent in linear mode
      2091f435
    • Linus Torvalds's avatar
      Merge tag 'pm+acpi-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 22446d3f
      Linus Torvalds authored
      Pull ACPI and power management fixes from Rafael Wysocki:
       "These include a fix for a recent ACPI hotplug regression, four
        concurrency related fixes and one PCI device removal fix for
        ACPI-based PCI hotplug (ACPIPHP), intel_pstate fix that should go into
        stable, three simple ACPI cleanups and a new entry for the ACPI video
        blacklist.
      
        Specifics:
      
         - Fix for a recent ACPI hotplug regression causing a NULL pointer
           dereference to occur while handling ACPI eject notifications for
           already ejected devices.  From Toshi Kani.
      
         - Four concurrency-related fixes for ACPIPHP.  Two of them add
           missing locking and the other two fix race conditions related to
           reference counting.
      
         - ACPIPHP fix to avoid NULL pointer dereferences during device
           removal involving Virtual Funcions.
      
         - intel_pstate fix to make it compute the percentage of time the CPU
           is busy properly.  From Dirk Brandewie.
      
         - Removal of two unnecessary NULL pointer checks in ACPI code and a
           fix for sscanf() format string from Dan Carpenter and Luis G.F.
      
         - New ACPI video blacklist entry for HP EliteBook Revolve 810 from
           Mika Westerberg"
      
      * tag 'pm+acpi-3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPI / hotplug: Fix panic on eject to ejected device
        ACPI / battery: Fix incorrect sscanf() string in acpi_battery_init_alarm()
        ACPI / proc: remove unneeded NULL check
        ACPI / utils: remove a pointless NULL check
        ACPI / video: Add HP EliteBook Revolve 810 to the blacklist
        intel_pstate: Take core C0 time into account for core busy calculation
        ACPI / hotplug / PCI: Fix bridge removal race vs dock events
        ACPI / hotplug / PCI: Fix bridge removal race in handle_hotplug_event()
        ACPI / hotplug / PCI: Scan root bus under the PCI rescan-remove lock
        ACPI / hotplug / PCI: Move PCI rescan-remove locking to hotplug_event()
        ACPI / hotplug / PCI: Remove entries from bus->devices in reverse order
      22446d3f
    • Ilya Dryomov's avatar
      libceph: do not dereference a NULL bio pointer · 0ec1d15e
      Ilya Dryomov authored
      Commit f38a5181 ("ceph: Convert to immutable biovecs") introduced
      a NULL pointer dereference, which broke rbd in -rc1.  Fix it.
      
      Cc: Kent Overstreet <kmo@daterainc.com>
      Signed-off-by: default avatarIlya Dryomov <ilya.dryomov@inktank.com>
      Reviewed-by: default avatarSage Weil <sage@inktank.com>
      0ec1d15e