Skip to content

L
linux
Switch branch/tag
  1. 05 Jul, 2019 4 commits
  3. 04 Jul, 2019 5 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next · c4cde580
      David S. Miller authored 
      Daniel Borkmann says:

====================
pull-request: bpf-next 2019-07-03

The following pull-request contains BPF updates for your *net-next* tree.

There is a minor merge conflict in mlx5 due to 8960b389 ("linux/dim:
Rename externally used net_dim members") which has been pulled into your
tree in the meantime, but resolution seems not that bad ... getting current
bpf-next out now before there's coming more on mlx5. ;) I'm Cc'ing Saeed
just so he's aware of the resolution below:

** First conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:

  <<<<<<< HEAD
  static int mlx5e_open_cq(struct mlx5e_channel *c,
                           struct dim_cq_moder moder,
                           struct mlx5e_cq_param *param,
                           struct mlx5e_cq *cq)
  =======
  int mlx5e_open_cq(struct mlx5e_channel *c, struct net_dim_cq_moder moder,
                    struct mlx5e_cq_param *param, struct mlx5e_cq *cq)
  >>>>>>> e5a3e259

Resolution is to take the second chunk and rename net_dim_cq_moder into
dim_cq_moder. Also the signature for mlx5e_open_cq() in ...

  drivers/net/ethernet/mellanox/mlx5/core/en.h +977

... and in mlx5e_open_xsk() ...

  drivers/net/ethernet/mellanox/mlx5/core/en/xsk/setup.c +64

... needs the same rename from net_dim_cq_moder into dim_cq_moder.

** Second conflict in drivers/net/ethernet/mellanox/mlx5/core/en_main.c:

  <<<<<<< HEAD
          int cpu = cpumask_first(mlx5_comp_irq_get_affinity_mask(priv->mdev, ix));
          struct dim_cq_moder icocq_moder = {0, 0};
          struct net_device *netdev = priv->netdev;
          struct mlx5e_channel *c;
          unsigned int irq;
  =======
          struct net_dim_cq_moder icocq_moder = {0, 0};
  >>>>>>> e5a3e259

Take the second chunk and rename net_dim_cq_moder into dim_cq_moder
as well.

Let me know if you run into any issues. Anyway, the main changes are:

1) Long-awaited AF_XDP support for mlx5e driver, from Maxim.

2) Addition of two new per-cgroup BPF hooks for getsockopt and
   setsockopt along with a new sockopt program type which allows more
   fine-grained pass/reject settings for containers. Also add a sock_ops
   callback that can be selectively enabled on a per-socket basis and is
   executed for every RTT to help tracking TCP statistics, both features
   from Stanislav.

3) Follow-up fix from loops in precision tracking which was not propagating
   precision marks and as a result verifier assumed that some branches were
   not taken and therefore wrongly removed as dead code, from Alexei.

4) Fix BPF cgroup release synchronization race which could lead to a
   double-free if a leaf's cgroup_bpf object is released and a new BPF
   program is attached to the one of ancestor cgroups in parallel, from Roman.

5) Support for bulking XDP_TX on veth devices which improves performance
   in some cases by around 9%, from Toshiaki.

6) Allow for lookups into BPF devmap and improve feedback when calling into
   bpf_redirect_map() as lookup is now performed right away in the helper
   itself, from Toke.

7) Add support for fq's Earliest Departure Time to the Host Bandwidth
   Manager (HBM) sample BPF program, from Lawrence.

8) Various cleanups and minor fixes all over the place from many others.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c4cde580
    • René van Dorst's avatar
      net: ethernet: mediatek: Fix overlapping capability bits. · e2c74694
      René van Dorst authored 
      Both MTK_TRGMII_MT7621_CLK and MTK_PATH_BIT are defined as bit 10.

This can causes issues on non-MT7621 devices which has the
MTK_PATH_BIT(MTK_ETH_PATH_GMAC1_RGMII) and MTK_TRGMII capability set.
The wrong TRGMII setup code can be executed. The current wrongly executed
code doesn’t do any harm on MT7623 and the TRGMII setup for the MT7623
SOC side is done in MT7530 driver So it wasn’t noticed in the test.

Move all capability bits in one enum so that they are all unique and easy
to expand in the future.

Because mtk_eth_path enum is merged in to mkt_eth_capabilities, the
variable path value is no longer between 0 to number of paths,
mtk_eth_path_name can’t be used anymore in this form. Convert the
mtk_eth_path_name array to a function to lookup the pathname.

The old code walked thru the mtk_eth_path enum, which is also merged
with mkt_eth_capabilities. Expand array mtk_eth_muxc so it can store the
name and capability bit of the mux. Convert the code so it can walk thru
the mtk_eth_muxc array.

Fixes: 8efaa653 ("net: ethernet: mediatek: Add MT7621 TRGMII mode support")
Signed-off-by: default avatarRené van Dorst <opensource@vdorst.com>

v1->v2:
- Move all capability bits in one enum, suggested by Willem de Bruijn
- Convert the mtk_eth_path_name array to a function to lookup the pathname
- Expand array mtk_eth_muxc so it can also store the name and capability
  bit of the mux
- Updated commit message
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      e2c74694
    • Weifeng Voon's avatar
      net: stmmac: Enable dwmac4 jumbo frame more than 8KiB · c3efed5a
      Weifeng Voon authored 
      Enable GMAC v4.xx and beyond to support 16KiB buffer.
Signed-off-by: default avatarWeifeng Voon <weifeng.voon@intel.com>
Signed-off-by: default avatarOng Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c3efed5a
    • Vincent Bernat's avatar
      bonding: add an option to specify a delay between peer notifications · 07a4ddec
      Vincent Bernat authored 
      Currently, gratuitous ARP/ND packets are sent every `miimon'
milliseconds. This commit allows a user to specify a custom delay
through a new option, `peer_notif_delay'.

Like for `updelay' and `downdelay', this delay should be a multiple of
`miimon' to avoid managing an additional work queue. The configuration
logic is copied from `updelay' and `downdelay'. However, the default
value cannot be set using a module parameter: Netlink or sysfs should
be used to configure this feature.

When setting `miimon' to 100 and `peer_notif_delay' to 500, we can
observe the 500 ms delay is respected:

    20:30:19.354693 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
    20:30:19.874892 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
    20:30:20.394919 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28
    20:30:20.914963 ARP, Request who-has 203.0.113.10 tell 203.0.113.10, length 28

In bond_mii_monitor(), I have tried to keep the lock logic readable.
The change is due to the fact we cannot rely on a notification to
lower the value of `bond->send_peer_notif' as `NETDEV_NOTIFY_PEERS' is
only triggered once every N times, while we need to decrement the
counter each time.

iproute2 also needs to be updated to be able to specify this new
attribute through `ip link'.
Signed-off-by: default avatarVincent Bernat <vincent@bernat.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      07a4ddec
    • Colin Ian King's avatar
      net: ethernet: sun: remove redundant assignment to variable err · 2368a870
      Colin Ian King authored 
      The variable err is being assigned with a value that is never
read and it is being updated in the next statement with a new value.
The assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2368a870
  5. 03 Jul, 2019 26 commits
  7. 02 Jul, 2019 5 commits
    • Petr Machata's avatar
      mlxsw: spectrum_ptp: Fix validation in mlxsw_sp1_ptp_packet_finish() · dbcdb61a
      Petr Machata authored 
      Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates
whether the corresponding port is still valid. However the condition is
incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to
compare it to skb->dev.

The condition needs to check whether the port is present and skb->dev still
refers to that port (or else is NULL). If that does not hold, bail out.
Add a pair of parentheses to fix the condition.

Fixes: d92e4e6e ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1")
Reported-by: default avatarColin Ian King <colin.king@canonical.com>
Signed-off-by: default avatarPetr Machata <petrm@mellanox.com>
Signed-off-by: default avatarColin Ian King <colin.king@canonical.com>
Reviewed-by: default avatarIdo Schimmel <idosch@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      dbcdb61a
    • Heiner Kallweit's avatar
      r8169: add random MAC address fallback · c782e204
      Heiner Kallweit authored 
      It was reported that the GPD MicroPC is broken in a way that no valid
MAC address can be read from the network chip. The vendor driver deals
with this by assigning a random MAC address as fallback. So let's do
the same.
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c782e204
    • Heiner Kallweit's avatar
      Revert "r8169: improve handling VLAN tag" · 7424edbb
      Heiner Kallweit authored 
      This reverts commit 759d0957.

The patch was based on a misunderstanding. As Al Viro pointed out [0]
it's simply wrong on big endian. So let's revert it.

[0] https://marc.info/?t=156200975600004&r=1&w=2Reported-by: default avatarAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7424edbb
    • Martin Blumenstingl's avatar
      net: stmmac: make "snps,reset-delays-us" optional again · cc5e92c2
      Martin Blumenstingl authored 
      Commit 760f1dc2 ("net: stmmac: add sanity check to
device_property_read_u32_array call") introduced error checking of the
device_property_read_u32_array() call in stmmac_mdio_reset().
This results in the following error when the "snps,reset-delays-us"
property is not defined in devicetree:
  invalid property snps,reset-delays-us

This sanity check made sense until commit 84ce4d0f ("net: stmmac:
initialize the reset delay array") ensured that there are fallback
values for the reset delay if the "snps,reset-delays-us" property is
absent. That was at the cost of making that property mandatory though.

Drop the sanity check for device_property_read_u32_array() and thus make
the "snps,reset-delays-us" property optional again (avoiding the error
message while loading the stmmac driver with a .dtb where the property
is absent).

Fixes: 760f1dc2 ("net: stmmac: add sanity check to device_property_read_u32_array call")
Signed-off-by: default avatarMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cc5e92c2
    • Eric Dumazet's avatar
      bonding/main: fix NULL dereference in bond_select_active_slave() · b8bd72d3
      Eric Dumazet authored 
      A bonding master can be up while best_slave is NULL.

[12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1
[12105.648984] IP: bond_select_active_slave+0x125/0x250
[12105.653977] PGD 0 P4D 0
[12105.656572] Oops: 0000 [#1] SMP PTI
[12105.660487] gsmi: Log Shutdown Reason 0x03
[12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel]
[12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2
[12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1
[12105.685700] mlx4_en: eth2: Link Up (linkstate)
[12105.724452] Workqueue: bond0 bond_mii_monitor
[12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250
[12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246
[12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000
[12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000
[12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600
[12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000
[12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000
[12105.775748] FS:  0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000
[12105.783892] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0
[12105.796976] Call Trace:
[12105.799446]  [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0
[12105.805317]  [<ffffffffabd42643>] process_one_work+0x143/0x370
[12105.811225]  [<ffffffffabd42c7a>] worker_thread+0x4a/0x360
[12105.816761]  [<ffffffffabd48bc5>] kthread+0x105/0x140
[12105.821865]  [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380
[12105.827757]  [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0
[12105.834266]  [<ffffffffac600241>] ret_from_fork+0x51/0x60

Fixes: e2a7420d ("bonding/main: convert to using slave printk macros")
Signed-off-by: default avatarEric Dumazet <edumazet@google.com>
Reported-by: default avatarJohn Sperbeck <jsperbeck@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b8bd72d3
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7