- 29 Jan, 2020 40 commits
-
-
Johan Hovold authored
commit 3111491f upstream. The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could lead to the driver binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 8e20cf2b ("Input: aiptek - fix crash on detecting device without endpoints") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Vladis Dronov <vdronov@redhat.com> Link: https://lore.kernel.org/r/20191210113737.4016-3-johan@kernel.orgSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit a8eeb74d upstream. The driver was checking the number of endpoints of the first alternate setting instead of the current one, something which could lead to the driver binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 162f98de ("Input: gtco - fix crash on detecting device without endpoints") Signed-off-by:
-
Johan Hovold authored
commit 6b32391e upstream. Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. This in turn could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: bdb5c57f ("Input: add sur40 driver for Samsung SUR40 (aka MS Surface 2.0/Pixelsense)") Signed-off-by:
-
Michał Mirosław authored
commit 2a187d03 upstream. For SDHCIv3+ with programmable clock mode, minimal clock frequency is still base clock / max(divider). Minimal programmable clock frequency is always greater than minimal divided clock frequency. Without this patch, SDHCI uses out-of-spec initial frequency when multiplier is big enough: mmc1: mmc_rescan_try_freq: trying to init card at 468750 Hz [for 480 MHz source clock divided by 1024] The code in sdhci_calc_clk() already chooses a correct SDCLK clock mode. Fixes: c3ed3877 ("mmc: sdhci: add support for programmable clock mode") Cc: <stable@vger.kernel.org> # 4f6aa326: mmc: tegra: Only advertise UHS modes if IO regulator is present Cc: <stable@vger.kernel.org> Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/ffb489519a446caffe7a0a05c4b9372bd52397bb.1579082031.git.mirq-linux@rere.qmqm.plSigned-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Michał Mirosław authored
commit f571389c upstream. Commit 7ad2ed1d inadvertently mixed up a quirk flag's name and broke SDR50 tuning override. Use correct NVQUIRK_ name. Fixes: 7ad2ed1d ("mmc: tegra: enable UHS-I modes") Cc: <stable@vger.kernel.org> Acked-by:
Thierry Reding <treding@nvidia.com> Tested-by:
-
Alex Sverdlin authored
commit 927d780e upstream. Scenario 1, ARMv7 ================= If code in arch/arm/kernel/ftrace.c would operate on mcount() pointer the following may be generated: 00000230 <prealloc_fixed_plts>: 230: b5f8 push {r3, r4, r5, r6, r7, lr} 232: b500 push {lr} 234: f7ff fffe bl 0 <__gnu_mcount_nc> 234: R_ARM_THM_CALL __gnu_mcount_nc 238: f240 0600 movw r6, #0 238: R_ARM_THM_MOVW_ABS_NC __gnu_mcount_nc 23c: f8d0 1180 ldr.w r1, [r0, #384] ; 0x180 FTRACE currently is not able to deal with it: WARNING: CPU: 0 PID: 0 at .../kernel/trace/ftrace.c:1979 ftrace_bug+0x1ad/0x230() ... CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.116-... #1 ... [<c0314e3d>] (unwind_backtrace) from [<c03115e9>] (show_stack+0x11/0x14) [<c03115e9>] (show_stack) from [<c051a7f1>] (dump_stack+0x81/0xa8) [<c051a7f1>] (dump_stack) from [<c0321c5d>] (warn_slowpath_common+0x69/0x90) [<c0321c5d>] (warn_slowpath_common) from [<c0321cf3>] (warn_slowpath_null+0x17/0x1c) [<c0321cf3>] (warn_slowpath_null) from [<c038ee9d>] (ftrace_bug+0x1ad/0x230) [<c038ee9d>] (ftrace_bug) from [<c038f1f9>] (ftrace_process_locs+0x27d/0x444) [<c038f1f9>] (ftrace_process_locs) from [<c08915bd>] (ftrace_init+0x91/0xe8) [<c08915bd>] (ftrace_init) from [<c0885a67>] (start_kernel+0x34b/0x358) [<c0885a67>] (start_kernel) from [<00308095>] (0x308095) ---[ end trace cb88537fdc8fa200 ]--- ftrace failed to modify [<c031266c>] prealloc_fixed_plts+0x8/0x60 actual: 44:f2:e1:36 ftrace record flags: 0 (0) expected tramp: c03143e9 Scenario 2, ARMv4T ================== ftrace: allocating 14435 entries in 43 pages ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2029 ftrace_bug+0x204/0x310 CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.5 #1 Hardware name: Cirrus Logic EDB9302 Evaluation Board [<c0010a24>] (unwind_backtrace) from [<c000ecb0>] (show_stack+0x20/0x2c) [<c000ecb0>] (show_stack) from [<c03c72e8>] (dump_stack+0x20/0x30) [<c03c72e8>] (dump_stack) from [<c0021c18>] (__warn+0xdc/0x104) [<c0021c18>] (__warn) from [<c0021d7c>] (warn_slowpath_null+0x4c/0x5c) [<c0021d7c>] (warn_slowpath_null) from [<c0095360>] (ftrace_bug+0x204/0x310) [<c0095360>] (ftrace_bug) from [<c04dabac>] (ftrace_init+0x3b4/0x4d4) [<c04dabac>] (ftrace_init) from [<c04cef4c>] (start_kernel+0x20c/0x410) [<c04cef4c>] (start_kernel) from [<00000000>] ( (null)) ---[ end trace 0506a2f5dae6b341 ]--- ftrace failed to modify [<c000c350>] perf_trace_sys_exit+0x5c/0xe8 actual: 1e:ff:2f:e1 Initializing ftrace call sites ftrace record flags: 0 (0) expected tramp: c000fb24 The analysis for this problem has been already performed previously, refer to the link below. Fix the above problems by allowing only selected reloc types in __mcount_loc. The list itself comes from the legacy recordmcount.pl script. Link: https://lore.kernel.org/lkml/56961010.6000806@pengutronix.de/ Cc: stable@vger.kernel.org Fixes: ed60453f ("ARM: 6511/1: ftrace: add ARM support for C version of recordmcount") Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Johan Hovold authored
commit ba9a103f upstream. The driver was issuing synchronous uninterruptible control requests without using a timeout. This could lead to the driver hanging on probe due to a malfunctioning (or malicious) device until the device is physically disconnected. While sleeping in probe the driver prevents other devices connected to the same hub from being added to (or removed from) the bus. The USB upper limit of five seconds per request should be more than enough. Fixes: 99f83c9c ("[PATCH] USB: add driver for Keyspan Digital Remote") Signed-off-by:
-
Guenter Roeck authored
commit 3bf8bdcf upstream. The hwmon core uses device managed functions, tied to the hwmon parent device, for various internal memory allocations. This is problematic since hwmon device lifetime does not necessarily match its parent's device lifetime. If there is a mismatch, memory leaks will accumulate until the parent device is released. Fix the problem by managing all memory allocations internally. The only exception is memory allocation for thermal device registration, which can be tied to the hwmon device, along with thermal device registration itself. Fixes: d560168b ("hwmon: (core) New hwmon registration API") Cc: stable@vger.kernel.org # v4.14.x: 47c332de: hwmon: Deal with errors from the thermal subsystem Cc: stable@vger.kernel.org # v4.14.x: 74e35127: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: stable@vger.kernel.org # v4.9.x: 3a412d5e: hwmon: (core) Simplify sysfs attribute name allocation Cc: stable@vger.kernel.org # v4.9.x: 47c332de: hwmon: Deal with errors from the thermal subsystem Cc: stable@vger.kernel.org # v4.9.x: 74e35127: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: stable@vger.kernel.org # v4.9+ Cc: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Dmitry Osipenko authored
commit 74e35127 upstream. Fix double-free that happens when thermal zone setup fails, see KASAN log below. ================================================================== BUG: KASAN: double-free or invalid-free in __hwmon_device_register+0x5dc/0xa7c CPU: 0 PID: 132 Comm: kworker/0:2 Tainted: G B 4.19.0-rc8-next-20181016-00042-gb52cd80401e9-dirty #41 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: events deferred_probe_work_func Backtrace: [<c0110540>] (dump_backtrace) from [<c0110944>] (show_stack+0x20/0x24) [<c0110924>] (show_stack) from [<c105cb08>] (dump_stack+0x9c/0xb0) [<c105ca6c>] (dump_stack) from [<c02fdaec>] (print_address_description+0x68/0x250) [<c02fda84>] (print_address_description) from [<c02fd4ac>] (kasan_report_invalid_free+0x68/0x88) [<c02fd444>] (kasan_report_invalid_free) from [<c02fc85c>] (__kasan_slab_free+0x1f4/0x200) [<c02fc668>] (__kasan_slab_free) from [<c02fd0c0>] (kasan_slab_free+0x14/0x18) [<c02fd0ac>] (kasan_slab_free) from [<c02f9c6c>] (kfree+0x90/0x294) [<c02f9bdc>] (kfree) from [<c0b41bbc>] (__hwmon_device_register+0x5dc/0xa7c) [<c0b415e0>] (__hwmon_device_register) from [<c0b421e8>] (hwmon_device_register_with_info+0xa0/0xa8) [<c0b42148>] (hwmon_device_register_with_info) from [<c0b42324>] (devm_hwmon_device_register_with_info+0x74/0xb4) [<c0b422b0>] (devm_hwmon_device_register_with_info) from [<c0b4481c>] (lm90_probe+0x414/0x578) [<c0b44408>] (lm90_probe) from [<c0aeeff4>] (i2c_device_probe+0x35c/0x384) [<c0aeec98>] (i2c_device_probe) from [<c08776cc>] (really_probe+0x290/0x3e4) [<c087743c>] (really_probe) from [<c0877a2c>] (driver_probe_device+0x80/0x1c4) [<c08779ac>] (driver_probe_device) from [<c0877da8>] (__device_attach_driver+0x104/0x11c) [<c0877ca4>] (__device_attach_driver) from [<c0874dd8>] (bus_for_each_drv+0xa4/0xc8) [<c0874d34>] (bus_for_each_drv) from [<c08773b0>] (__device_attach+0xf0/0x15c) [<c08772c0>] (__device_attach) from [<c0877e24>] (device_initial_probe+0x1c/0x20) [<c0877e08>] (device_initial_probe) from [<c08762f4>] (bus_probe_device+0xdc/0xec) [<c0876218>] (bus_probe_device) from [<c0876a08>] (deferred_probe_work_func+0xa8/0xd4) [<c0876960>] (deferred_probe_work_func) from [<c01527c4>] (process_one_work+0x3dc/0x96c) [<c01523e8>] (process_one_work) from [<c01541e0>] (worker_thread+0x4ec/0x8bc) [<c0153cf4>] (worker_thread) from [<c015b238>] (kthread+0x230/0x240) [<c015b008>] (kthread) from [<c01010bc>] (ret_from_fork+0x14/0x38) Exception stack(0xcf743fb0 to 0xcf743ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Allocated by task 132: kasan_kmalloc.part.1+0x58/0xf4 kasan_kmalloc+0x90/0xa4 kmem_cache_alloc_trace+0x90/0x2a0 __hwmon_device_register+0xbc/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Freed by task 132: __kasan_slab_free+0x12c/0x200 kasan_slab_free+0x14/0x18 kfree+0x90/0x294 hwmon_dev_release+0x1c/0x20 device_release+0x4c/0xe8 kobject_put+0xac/0x11c device_unregister+0x2c/0x30 __hwmon_device_register+0xa58/0xa7c hwmon_device_register_with_info+0xa0/0xa8 devm_hwmon_device_register_with_info+0x74/0xb4 lm90_probe+0x414/0x578 i2c_device_probe+0x35c/0x384 really_probe+0x290/0x3e4 driver_probe_device+0x80/0x1c4 __device_attach_driver+0x104/0x11c bus_for_each_drv+0xa4/0xc8 __device_attach+0xf0/0x15c device_initial_probe+0x1c/0x20 bus_probe_device+0xdc/0xec deferred_probe_work_func+0xa8/0xd4 process_one_work+0x3dc/0x96c worker_thread+0x4ec/0x8bc kthread+0x230/0x240 ret_from_fork+0x14/0x38 (null) Cc: <stable@vger.kernel.org> # v4.15+ Fixes: 47c332de ("hwmon: Deal with errors from the thermal subsystem") Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
-
Linus Walleij authored
commit 47c332de upstream. If the thermal subsystem returne -EPROBE_DEFER or any other error when hwmon calls devm_thermal_zone_of_sensor_register(), this is silently ignored. I ran into this with an incorrectly defined thermal zone, making it non-existing and thus this call failed with -EPROBE_DEFER assuming it would appear later. The sensor was still added which is incorrect: sensors must strictly be added after the thermal zones, so deferred probe must be respected. Fixes: d560168b ("hwmon: (core) New hwmon registration API") Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Guenter Roeck authored
commit 3a412d5e upstream. Allocating the sysfs attribute name only if needed and only with the required minimum length looks optimal, but does not take the additional overhead for both devm_ data structures and the allocation header itself into account. This also results in unnecessary memory fragmentation. Move the sysfs name string into struct hwmon_device_attribute and give it a sufficient length to reduce this overhead. Signed-off-by:
-
Luuk Paulussen authored
commit cf3ca187 upstream. reg2volt returns the voltage that matches a given register value. Converting this back the other way with volt2reg didn't return the same register value because it used truncation instead of rounding. This meant that values read from sysfs could not be written back to sysfs to set back the same register value. With this change, volt2reg will return the same value for every voltage previously returned by reg2volt (for the set of possible input values) Signed-off-by:
Luuk Paulussen <luuk.paulussen@alliedtelesis.co.nz> Link: https://lore.kernel.org/r/20191205231659.1301-1-luuk.paulussen@alliedtelesis.co.nz cc: stable@vger.kernel.org Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 940ba149 ] A malicious user could use RAW sockets and fool GTP using them as standard SOCK_DGRAM UDP sockets. BUG: KMSAN: uninit-value in udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] BUG: KMSAN: uninit-value in setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 CPU: 0 PID: 11262 Comm: syz-executor613 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 udp_tunnel_encap_enable include/net/udp_tunnel.h:174 [inline] setup_udp_tunnel_sock+0x45e/0x6f0 net/ipv4/udp_tunnel.c:85 gtp_encap_enable_socket+0x37f/0x5a0 drivers/net/gtp.c:827 gtp_encap_enable drivers/net/gtp.c:844 [inline] gtp_newlink+0xfb/0x1e50 drivers/net/gtp.c:666 __rtnl_newlink net/core/rtnetlink.c:3305 [inline] rtnl_newlink+0x2973/0x3920 net/core/rtnetlink.c:3363 rtnetlink_rcv_msg+0x1153/0x1570 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x441359 Code: e8 ac e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff1cd0ac28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000441359 RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003 RBP: 00000000006cb018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000246 R12: 00000000004020d0 R13: 0000000000402160 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags+0x3c/0x90 mm/kmsan/kmsan.c:144 kmsan_internal_alloc_meta_for_pages mm/kmsan/kmsan_shadow.c:307 [inline] kmsan_alloc_page+0x12a/0x310 mm/kmsan/kmsan_shadow.c:336 __alloc_pages_nodemask+0x57f2/0x5f60 mm/page_alloc.c:4800 alloc_pages_current+0x67d/0x990 mm/mempolicy.c:2207 alloc_pages include/linux/gfp.h:534 [inline] alloc_slab_page+0x111/0x12f0 mm/slub.c:1511 allocate_slab mm/slub.c:1656 [inline] new_slab+0x2bc/0x1130 mm/slub.c:1722 new_slab_objects mm/slub.c:2473 [inline] ___slab_alloc+0x1533/0x1f30 mm/slub.c:2624 __slab_alloc mm/slub.c:2664 [inline] slab_alloc_node mm/slub.c:2738 [inline] slab_alloc mm/slub.c:2783 [inline] kmem_cache_alloc+0xb23/0xd70 mm/slub.c:2788 sk_prot_alloc+0xf2/0x620 net/core/sock.c:1597 sk_alloc+0xf0/0xbe0 net/core/sock.c:1657 inet_create+0x7c7/0x1370 net/ipv4/af_inet.c:321 __sock_create+0x8eb/0xf00 net/socket.c:1420 sock_create net/socket.c:1471 [inline] __sys_socket+0x1a1/0x600 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket+0x8d/0xb0 net/socket.c:1520 __x64_sys_socket+0x4a/0x70 net/socket.c:1520 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Pablo Neira <pablo@netfilter.org> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
James Hughes authored
[ Upstream commit ce896476 ] As reported by Eric Dumazet, there are still some outstanding cases where the driver does not handle TSO correctly when skb's are over a certain size. Most cases have been fixed, this patch should ensure that forwarded SKB's that are greater than MAX_SINGLE_PACKET_SIZE - TX_OVERHEAD are software segmented and handled correctly. Signed-off-by:
James Hughes <james.hughes@raspberrypi.org> Reviewed-by:
-
Wen Yang authored
[ Upstream commit 5b2f1f30 ] do_div() does a 64-by-32 division. Use div64_long() instead of it if the divisor is long, to avoid truncation to 32-bit. And as a nice side effect also cleans up the function a bit. Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Cong Wang authored
[ Upstream commit 61678d28 ] syzbot reported an out-of-bound access in em_nbyte. As initially analyzed by Eric, this is because em_nbyte sets its own em->datalen in em_nbyte_change() other than the one specified by user, but this value gets overwritten later by its caller tcf_em_validate(). We should leave em->datalen untouched to respect their choices. I audit all the in-tree ematch users, all of those implement ->change() set em->datalen, so we can just avoid setting it twice in this case. Reported-and-tested-by: syzbot+5af9a90dad568aa9f611@syzkaller.appspotmail.com Reported-by: syzbot+2f07903a5b05e7f36410@syzkaller.appspotmail.com Fixes: 1da177e4 ("Linux-2.6.12-rc2") Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by:
-
William Dauchy authored
[ Upstream commit d0f41851 ] in the same manner as commit 690afc16 ("net: ip6_gre: fix moving ip6gre between namespaces"), fix namespace moving as it was broken since commit 2e15ea39 ("ip_gre: Add support to collect tunnel metadata."). Indeed, the ip6_gre commit removed the local flag for collect_md condition, so there is no reason to keep it for ip_gre/ip_tunnel. this patch will fix both ip_tunnel and ip_gre modules. Fixes: 2e15ea39 ("ip_gre: Add support to collect tunnel metadata.") Signed-off-by:
William Dauchy <w.dauchy@criteo.com> Acked-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
William Dauchy authored
[ Upstream commit 5311a69a ] in the same manner as commit d0f41851 ("net, ip_tunnel: fix namespaces move"), fix namespace moving as it was broken since commit 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnel"), but for ipv6 this time; there is no reason to keep it for ip6_tunnel. Fixes: 8d79266b ("ip6_tunnel: add collect_md mode to IPv6 tunnel") Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 3546d8f1 = The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by:
Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit fa865ba1 ] In fs_open(), 'vcc' is allocated through kmalloc() and assigned to 'atm_vcc->dev_data.' In the following execution, if an error occurs, e.g., there is no more free channel, an error code EBUSY or ENOMEM will be returned. However, 'vcc' is not deallocated, leading to memory leaks. Note that, in normal cases where fs_open() returns 0, 'vcc' will be deallocated in fs_close(). But, if fs_open() fails, there is no guarantee that fs_close() will be invoked. To fix this issue, deallocate 'vcc' before the error code is returned. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
-
Richard Palethorpe authored
[ Upstream commit 0ace17d5 ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17 ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a@syzkaller.appspotmail.com Signed-off-by:
Richard Palethorpe <rpalethorpe@suse.com> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Tyler Hall <tylerwhall@gmail.com> Cc: linux-can@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: syzkaller@googlegroups.com Signed-off-by:
-
Florian Fainelli authored
commit ceb62813 upstream. With commit 2d55173e ("phy: add generic function to support ksetting support"), we lost the ability to report the transceiver type like we used to. Now that we have added back the transceiver type to ethtool_link_settings, we can report it back like we used to and have no loss of information. Fixes: 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Fixes: 2d55173e ("phy: add generic function to support ksetting support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
commit 19cab887 upstream. Commit 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") deprecated the ethtool_cmd::transceiver field, which was fine in premise, except that the PHY library was actually using it to report the type of transceiver: internal or external. Use the first word of the reserved field to put this __u8 transceiver field back in. It is made read-only, and we don't expect the ETHTOOL_xLINKSETTINGS API to be doing anything with this anyway, so this is mostly for the legacy path where we do: ethtool_get_settings() -> dev->ethtool_ops->get_link_ksettings() -> convert_link_ksettings_to_legacy_settings() to have no information loss compared to the legacy get_settings API. Fixes: 3f1ac7a7 ("net: ethtool: add new ETHTOOL_xLINKSETTINGS API") Signed-off-by:
-
Finn Thain authored
[ Upstream commit 1efdd4bd ] Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by:
Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.deSigned-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Max Gurtovoy authored
[ Upstream commit c1545f1a ] The retured value from ib_dma_map_sg saved in dma_nents variable. To avoid future mismatch between types, define dma_nents as an integer instead of unsigned. Fixes: 57b26497 ("IB/iser: Pass the correct number of entries for dma mapped SGL") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Israel Rukshin <israelr@mellanox.com> Signed-off-by:
Max Gurtovoy <maxg@mellanox.com> Acked-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Andre Przywara authored
[ Upstream commit 39a1a894 ] Older versions of the Juno *SoC* TRM [1] recommended that the UART clock source should be 7.2738 MHz, whereas the *system* TRM [2] stated a more correct value of 7.3728 MHz. Somehow the wrong value managed to end up in our DT. Doing a prime factorisation, a modulo divide by 115200 and trying to buy a 7.2738 MHz crystal at your favourite electronics dealer suggest that the old value was actually a typo. The actual UART clock is driven by a PLL, configured via a parameter in some board.txt file in the firmware, which reads 7.37 MHz (sic!). Fix this to correct the baud rate divisor calculation on the Juno board. [1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0515b.b/DDI0515B_b_juno_arm_development_platform_soc_trm.pdf [2] http://infocenter.arm.com/help/topic/com.arm.doc.100113_0000_07_en/arm_versatile_express_juno_development_platform_(v2m_juno)_technical_reference_manual_100113_0000_07_en.pdf Fixes: 71f867ec ("arm64: Add Juno board device tree.") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
-
Sam Bobroff authored
[ Upstream commit 62d91dd2 ] The INTERRUPT_CNTL2 register expects a valid DMA address, but is currently set with a GPU MC address. This can cause problems on systems that detect the resulting DMA read from an invalid address (found on a Power8 guest). Instead, use the DMA address of the dummy page because it will always be safe. Fixes: d8f60cfc ("drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3)") Fixes: 25a857fb ("drm/radeon/kms: add support for interrupts on SI") Fixes: a59781bb ("drm/radeon: add support for interrupts on CIK (v5)") Signed-off-by:
Sam Bobroff <sbobroff@linux.ibm.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 340049d4 ] When devm_kcalloc fails, it forgets to call edma_free_slot. Replace direct return with failure handler to fix it. Fixes: 1be5336b ("dmaengine: edma: New device tree binding") Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073802.28424-1-hslester96@gmail.comSigned-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit b756ad92 ] KCSAN reported the following data-race [1] Adding a couple of READ_ONCE()/WRITE_ONCE() should silence it. Since the report hinted about multiple cpus using the history concurrently, I added a test avoiding writing on it if the victim slot already contains the desired value. [1] BUG: KCSAN: data-race in fanout_demux_rollover / fanout_demux_rollover read to 0xffff8880b01786cc of 4 bytes by task 18921 on cpu 1: fanout_flow_is_huge net/packet/af_packet.c:1303 [inline] fanout_demux_rollover+0x33e/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 write to 0xffff8880b01786cc of 4 bytes by task 18922 on cpu 0: fanout_flow_is_huge net/packet/af_packet.c:1306 [inline] fanout_demux_rollover+0x3a4/0x3f0 net/packet/af_packet.c:1353 packet_rcv_fanout+0x34e/0x490 net/packet/af_packet.c:1453 deliver_skb net/core/dev.c:1888 [inline] dev_queue_xmit_nit+0x15b/0x540 net/core/dev.c:1958 xmit_one net/core/dev.c:3195 [inline] dev_hard_start_xmit+0x3f5/0x430 net/core/dev.c:3215 __dev_queue_xmit+0x14ab/0x1b40 net/core/dev.c:3792 dev_queue_xmit+0x21/0x30 net/core/dev.c:3825 neigh_direct_output+0x1f/0x30 net/core/neighbour.c:1530 neigh_output include/net/neighbour.h:511 [inline] ip6_finish_output2+0x7a2/0xec0 net/ipv6/ip6_output.c:116 __ip6_finish_output net/ipv6/ip6_output.c:142 [inline] __ip6_finish_output+0x2d7/0x330 net/ipv6/ip6_output.c:127 ip6_finish_output+0x41/0x160 net/ipv6/ip6_output.c:152 NF_HOOK_COND include/linux/netfilter.h:294 [inline] ip6_output+0xf2/0x280 net/ipv6/ip6_output.c:175 dst_output include/net/dst.h:436 [inline] ip6_local_out+0x74/0x90 net/ipv6/output_core.c:179 ip6_send_skb+0x53/0x110 net/ipv6/ip6_output.c:1795 udp_v6_send_skb.isra.0+0x3ec/0xa70 net/ipv6/udp.c:1173 udpv6_sendmsg+0x1906/0x1c20 net/ipv6/udp.c:1471 inet6_sendmsg+0x6d/0x90 net/ipv6/af_inet6.c:576 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0x9f/0xc0 net/socket.c:657 ___sys_sendmsg+0x2b7/0x5d0 net/socket.c:2311 __sys_sendmmsg+0x123/0x350 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x64/0x80 net/socket.c:2439 do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 18922 Comm: syz-executor.3 Not tainted 5.4.0-rc6+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 3b3a5b0a ("packet: rollover huge flows before small flows") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9d027e3a ] A difference of two unsigned long needs long storage. Fixes: c7fb64db ("[NETLINK]: Neighbour table configuration and statistics via rtnetlink") Signed-off-by:
-
Tiezhu Yang authored
[ Upstream commit dece3c2a ] When call function hwmon_device_register failed, use the actual return value instead of always -ENOMEM. Fixes: 64f09aa9 ("MIPS: Loongson-3: Add CPU Hwmon platform driver") Signed-off-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Huacai Chen <chenhc@lemote.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit 39034bb0 ] Commit da298c6d ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") converted a former ov6650_g_fmt() video operation callback to an ov6650_get_fmt() pad operation callback. However, the converted function disregards a format->which flag that pad operations should obey and always returns active frame format settings. That can be fixed by always responding to V4L2_SUBDEV_FORMAT_TRY with -EINVAL, or providing the response from a pad config argument, likely updated by a former user call to V4L2_SUBDEV_FORMAT_TRY .set_fmt(). Since implementation of the latter is trivial, go for it. Fixes: da298c6d ("[media] v4l2: replace video op g_mbus_fmt by pad op get_fmt") Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit 1c6a2b63 ] User arguments passed to .get/set_fmt() pad operation callbacks may contain unsupported values. The driver takes control over frame size and pixel code as well as colorspace and field attributes but has never cared for remainig format attributes, i.e., ycbcr_enc, quantization and xfer_func, introduced by commit 11ff030c ("[media] v4l2-mediabus: improve colorspace support"). Fix it. Set up a static v4l2_mbus_framefmt structure with attributes initialized to reasonable defaults and use it for updating content of user provided arguments. In case of V4L2_SUBDEV_FORMAT_ACTIVE, postpone frame size update, now performed from inside ov6650_s_fmt() helper, util the user argument is first updated in ov6650_set_fmt() with default frame format content. For V4L2_SUBDEV_FORMAT_TRY, don't copy all attributes to pad config, only those handled by the driver, then fill the response with the default frame format updated with resulting pad config format code and frame size. Fixes: 11ff030c ("[media] v4l2-mediabus: improve colorspace support") Signed-off-by:
-
Janusz Krzysztofik authored
[ Upstream commit 12500731 ] Since its initial submission, the driver selects V4L2_COLORSPACE_JPEG for supported formats other than V4L2_MBUS_FMT_SBGGR8_1X8. According to v4l2-compliance test program, V4L2_COLORSPACE_JPEG applies exclusively to V4L2_PIX_FMT_JPEG. Since the sensor does not support JPEG format, fix it to always select V4L2_COLORSPACE_SRGB. Fixes: 2f6e2404 ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by:
-
Marc Dionne authored
[ Upstream commit b485275f ] By default s_maxbytes is set to MAX_NON_LFS, which limits the usable file size to 2GB, enforced by the vfs. Commit b9b1f8d5 ("AFS: write support fixes") added support for the 64-bit fetch and store server operations, but did not change this value. As a result, attempts to write past the 2G mark result in EFBIG errors: $ dd if=/dev/zero of=foo bs=1M count=1 seek=2048 dd: error writing 'foo': File too large Set s_maxbytes to MAX_LFS_FILESIZE. Fixes: b9b1f8d5 ("AFS: write support fixes") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stefan Wahren authored
[ Upstream commit bc19c329 ] The reset counter is specific for every QCA700x chip. So move this into the private driver struct. Otherwise we get unpredictable reset behavior in setups with multiple QCA700x chips. Fixes: 291ab06e (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by:
Stefan Wahren <stefan.wahren@in-tech.com> Signed-off-by:
Stefan Wahren <wahrenst@gmx.net> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit e0ad032e ] If packet corruption failed we jump to finish_segs and return NET_XMIT_SUCCESS. Seeing success will make the parent qdisc increment its backlog, that's incorrect - we need to return NET_XMIT_DROP. Fixes: 6071bd1a ("netem: Segment GSO packets on enqueue") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Jakub Kicinski authored
[ Upstream commit a7fa12d1 ] To corrupt a GSO frame we first perform segmentation. We then proceed using the first segment instead of the full GSO skb and requeue the rest of the segments as separate packets. If there are any issues with processing the first segment we still want to process the rest, therefore we jump to the finish_segs label. Commit 177b8007 ("net: netem: fix backlog accounting for corrupted GSO frames") started using the pointer to the first segment in the "rest of segments processing", but as mentioned above the first segment may had already been freed at this point. Backlog corrections for parent qdiscs have to be adjusted. Fixes: 177b8007 ("net: netem: fix backlog accounting for corrupted GSO frames") Reported-by:
kbuild test robot <lkp@intel.com> Reported-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Robin Gong authored
[ Upstream commit bd73dfab ] Illegal memory will be touch if SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (41) exceed the size of structure sdma_script_start_addrs(40), thus cause memory corrupt such as slob block header so that kernel trap into while() loop forever in slob_free(). Please refer to below code piece in imx-sdma.c: for (i = 0; i < sdma->script_number; i++) if (addr_arr[i] > 0) saddr_arr[i] = addr_arr[i]; /* memory corrupt here */ That issue was brought by commit a572460b ("dmaengine: imx-sdma: Add support for version 3 firmware") because SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V3 (38->41 3 scripts added) not align with script number added in sdma_script_start_addrs(2 scripts). Fixes: a572460b ("dmaengine: imx-sdma: Add support for version 3 firmware") Cc: stable@vger.kernel Link: https://www.spinics.net/lists/arm-kernel/msg754895.htmlSigned-off-by:
Robin Gong <yibin.gong@nxp.com> Reported-by:
Jurgen Lambrecht <J.Lambrecht@TELEVIC.com> Link: https://lore.kernel.org/r/1569347584-3478-1-git-send-email-yibin.gong@nxp.com [vkoul: update the patch title] Signed-off-by:
-
Jeffrey Hugo authored
[ Upstream commit 78e31c42 ] On msm8998, vblank timeouts are observed because the DSI controller is not reset properly, which ends up stalling the MDP. This is because the reset logic is not correct per the hardware documentation. The documentation states that after asserting reset, software should wait some time (no indication of how long), or poll the status register until it returns 0 before deasserting reset. wmb() is insufficient for this purpose since it just ensures ordering, not timing between writes. Since asserting and deasserting reset occurs on the same register, ordering is already guaranteed by the architecture, making the wmb extraneous. Since we would define a timeout for polling the status register to avoid a possible infinite loop, lets just use a static delay of 20 ms, since 16.666 ms is the time available to process one frame at 60 fps. Fixes: a689554b ("drm/msm: Initial add DSI connector support") Cc: Hai Li <hali@codeaurora.org> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Reviewed-by:
Sean Paul <sean@poorly.run> [seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191011133939.16551-1-jeffrey.l.hugo@gmail.comSigned-off-by:
-
