- 11 Jan, 2016 2 commits
-
-
Hannes Reinecke authored
commit bf4e6b4e upstream. When a cloned request is retried on other queues it always needs to be checked against the queue limits of that queue. Otherwise the calculations for nr_phys_segments might be wrong, leading to a crash in scsi_init_sgtable(). To clarify this the patch renames blk_rq_check_limits() to blk_cloned_rq_check_limits() and removes the symbol export, as the new function should only be used for cloned requests and never exported. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Ewan Milne <emilne@redhat.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Hannes Reinecke <hare@suse.de> Fixes: e2a60da7 ("block: Clean up special command handling logic") Acked-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
James Smart authored
commit 63e480fd upstream. Signed-off-by:
Dick Kennedy <dick.kennedy@emulex.com> Signed-off-by:
James Smart <james.smart@emulex.com> Reviewed-by:
James Bottomley <JBottomley@Odin.com> Acked-by:
Johannes Thumshirn <jthumshirn@suse.com> Signed-off-by:
-
- 09 Jan, 2016 10 commits
-
-
Chris Wilson authored
commit 611a7a4f upstream. One small change I forgot to make in commit c4d69da1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Sep 8 14:25:41 2014 +0100 drm/i915: Evict CS TLBs between batches was to update the copy width for the compact BLT copy instruction. Reported-by:
Thomas Richter <thor@math.tu-berlin.de> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Thomas Richter <thor@math.tu-berlin.de> Cc: Jani Nikula <jani.nikula@intel.com> Tested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Corey Minyard authored
commit 021c5b34 upstream. The code for resizing the trace ring buffers has to run the per-cpu resize on the CPU itself. The code was using preempt_off() and running the code for the current CPU directly, otherwise calling schedule_work_on(). At least on RT this could result in the following: |BUG: sleeping function called from invalid context at kernel/rtmutex.c:673 |in_atomic(): 1, irqs_disabled(): 0, pid: 607, name: bash |3 locks held by bash/607: |CPU: 0 PID: 607 Comm: bash Not tainted 3.12.15-rt25+ #124 |(rt_spin_lock+0x28/0x68) |(free_hot_cold_page+0x84/0x3b8) |(free_buffer_page+0x14/0x20) |(rb_update_pages+0x280/0x338) |(ring_buffer_resize+0x32c/0x3dc) |(free_snapshot+0x18/0x38) |(tracing_set_tracer+0x27c/0x2ac) probably via |cd /sys/kernel/debug/tracing/ |echo 1 > events/enable ; sleep 2 |echo 1024 > buffer_size_kb If we just always use schedule_work_on(), there's no need for the preempt_off(). So do that. Link: http://lkml.kernel.org/p/1405537633-31518-1-git-send-email-cminyard@mvista.comReported-by:
Stanislav Meduna <stano@meduna.org> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Ditang Chen authored
commit 2ca310fc upstream. When tracking sunrpc_task events in nfs client, the clnt pointer may be NULL. [ 139.269266] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 139.269915] IP: [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] PGD 1d293067 PUD 1d294067 PMD 0 [ 139.269915] Oops: 0000 [#1] SMP [ 139.269915] Modules linked in: nfsv4 dns_resolver nfs lockd sunrpc fscache sg ppdev e1000 serio_raw pcspkr parport_pc parport i2c_piix4 i2c_core microcode xfs libcrc32c sd_mod sr_mod cdrom ata_generic crc_t10dif crct10dif_common pata_acpi ahci libahci ata_piix libata dm_mirror dm_region_hash dm_log dm_mod [ 139.269915] CPU: 0 PID: 59 Comm: kworker/0:2 Not tainted 3.10.0-84.el7.x86_64 #1 [ 139.269915] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 139.269915] Workqueue: rpciod rpc_async_schedule [sunrpc] [ 139.269915] task: ffff88001b598000 ti: ffff88001b632000 task.ti: ffff88001b632000 [ 139.269915] RIP: 0010:[<ffffffffa026f216>] [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] RSP: 0018:ffff88001b633d70 EFLAGS: 00010206 [ 139.269915] RAX: ffff88001dfc5338 RBX: ffff88001cc37a00 RCX: ffff88001dfc5334 [ 139.269915] RDX: ffff88001dfc5338 RSI: 0000000000000000 RDI: ffff88001dfc533c [ 139.269915] RBP: ffff88001b633db0 R08: 000000000000002c R09: 000000000000000a [ 139.269915] R10: 0000000000062180 R11: 00000020759fb9dc R12: ffffffffa0292c20 [ 139.269915] R13: ffff88001dfc5334 R14: 0000000000000000 R15: 0000000000000000 [ 139.269915] FS: 0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 139.269915] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 139.269915] CR2: 0000000000000004 CR3: 000000001d290000 CR4: 00000000000006f0 [ 139.269915] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 139.269915] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 139.269915] Stack: [ 139.269915] 000000001b633d98 0000000000000246 ffff88001df1dc00 ffff88001cc37a00 [ 139.269915] ffff88001bc35e60 0000000000000000 ffff88001ffa0a48 ffff88001bc35ee0 [ 139.269915] ffff88001b633e08 ffffffffa02704b5 0000000000010000 ffff88001cc37a70 [ 139.269915] Call Trace: [ 139.269915] [<ffffffffa02704b5>] __rpc_execute+0x1d5/0x400 [sunrpc] [ 139.269915] [<ffffffffa0270706>] rpc_async_schedule+0x26/0x30 [sunrpc] [ 139.269915] [<ffffffff8107867b>] process_one_work+0x17b/0x460 [ 139.269915] [<ffffffff8107942b>] worker_thread+0x11b/0x400 [ 139.269915] [<ffffffff81079310>] ? rescuer_thread+0x3e0/0x3e0 [ 139.269915] [<ffffffff8107fc80>] kthread+0xc0/0xd0 [ 139.269915] [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110 [ 139.269915] [<ffffffff815d122c>] ret_from_fork+0x7c/0xb0 [ 139.269915] [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110 [ 139.269915] Code: 4c 8b 45 c8 48 8d 7d d0 89 4d c4 41 89 c9 b9 28 00 00 00 e8 9d b4 e9 e0 48 85 c0 49 89 c5 74 a2 48 89 c7 e8 9d 3f e9 e0 48 89 c2 <41> 8b 46 04 48 8b 7d d0 4c 89 e9 4c 89 e6 89 42 0c 0f b7 83 d4 [ 139.269915] RIP [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] RSP <ffff88001b633d70> [ 139.269915] CR2: 0000000000000004 [ 140.946406] ---[ end trace ba486328b98d7622 ]--- Signed-off-by:
Ditang Chen <chendt.fnst@cn.fujitsu.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Herbert Xu authored
commit cb6ccf09 upstream. The commit 3cdaa5be ("ipv4: Don't increase PMTU with Datagram Too Big message") broke PMTU in cases where the rt_pmtu value has expired but is smaller than the new PMTU value. This obsolete rt_pmtu then prevents the new PMTU value from being installed. Fixes: 3cdaa5be ("ipv4: Don't increase PMTU with Datagram Too Big message") Reported-by:
Gerd v. Egidy <gerd.von.egidy@intra2net.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Li Wei authored
commit 3cdaa5be upstream. RFC 1191 said, "a host MUST not increase its estimate of the Path MTU in response to the contents of a Datagram Too Big message." Signed-off-by:
Li Wei <lw@cn.fujitsu.com> Signed-off-by:
-
Bjorn Helgaas authored
commit a006482b upstream. This message isn't useful any more, so drop it. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=60636Reported-by:
Oleksil Shevchuk <alxchk@gmail.com> Reference: http://lkml.kernel.org/r/CALCETrWkr53ZjqdN3t7rTTfr=+ZKZXJoYsuBcwPf0kN_33GfAw@mail.gmail.comReported-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Eric Ren authored
commit a6b1533e upstream. Replace wait_event_killable with wait_event_interruptible so that a program waiting for a posix lock can be interrupted by a signal. With the killable version, a program was not interruptible by a signal if it had a signal handler set for it, overriding the default action of terminating the process. Signed-off-by:
Eric Ren <zren@suse.com> Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 9a811230 upstream. Lenovo Thinkpad T440s suffers from constant background noises, and it seems to be a generic hardware issue on this model: https://forums.lenovo.com/t5/ThinkPad-T400-T500-and-newer-T/T440s-speaker-noise/td-p/1339883 As the noise comes from the analog loopback path, disabling the path is the easy workaround. Also, the machine gives significant cracking noises at PM suspend. A workaround found by trial-and-error is to disable the shutup callback currently used for ALC269-variant. This patch addresses these noise issues by introducing a new fixup chain. Although the same workaround might be applicable to other Thinkpad models, it's applied only to T440s (17aa:220c) in this patch, so far, just to be safe (you chicken!). As a compromise, a new model option string "tp440" is provided now, though, so that owners of other Thinkpad models can test it more easily. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=958504Reported-and-tested-by:
Tim Hardeck <thardeck@suse.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Kamal Mostafa authored
commit f6ba98c5 upstream. Signed-off-by:
Kamal Mostafa <kamal@canonical.com> Acked-by:
Pavel Machek <pavel@ucw.cz> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com> Link: http://lkml.kernel.org/r/1447280736-2161-2-git-send-email-kamal@canonical.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> [ kamal: backport to 3.12-stable: build all tools for this version ] Signed-off-by:
-
Ingo Molnar authored
commit 23a0d4e8 upstream. Tapasweni Pathak reported that we do a kmalloc() in efi_call_phys_prolog() on x86-64 while having interrupts disabled, which is a big no-no, as kmalloc() can sleep. Solve this by removing the irq disabling from the prolog/epilog calls around EFI calls: it's unnecessary, as in this stage we are single threaded in the boot thread, and we don't ever execute this from interrupt contexts. Reported-by:
Tapasweni Pathak <tapaswenipathak@gmail.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> [ luis: backported to 3.10: adjusted context ] Signed-off-by:
Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
- 05 Jan, 2016 28 commits
-
-
Jiri Slaby authored
-
Maciej Zuk authored
commit 18339f59 upstream. Fixed HID descriptor for DragonRise Joystick. Replaced default descriptor which doubles Z axis and causes mixing values of X and Z axes. Signed-off-by:
Maciej Zuk <gzmlke@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Victor Kamensky authored
commit 661553b9 upstream. All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by:
Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by:
Taras Kondratiuk <taras.kondratiuk@linaro.org> Acked-by:
Tony Lindgren <tony@atomide.com> Acked-by:
Kevin Hilman <khilman@linaro.org> Acked-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by:
Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Xiaolong Ye authored
commit 5f25f066 upstream. time_in_state in struct devfreq is defined as unsigned long, so devm_kzalloc should use sizeof(unsigned long) as argument instead of sizeof(unsigned int), otherwise it will cause unexpected result in 64bit system. Signed-off-by:
Xiaolong Ye <yexl@marvell.com> Signed-off-by:
Kevin Liu <kliu5@marvell.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Tobias Jakobi authored
commit 14a21e7b upstream. Writing the currently set governor into sysfs currently seems to fail. Fix this by setting the return code to zero before leaving governor_store(). Signed-off-by:
Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by:
-
Georgios Toptsidis authored
commit f7e7868b upstream. Recently, i bought a blu-ray writer and noticed that while cdrecord worked perfectly, random writing didn't work on rewritable bd-re media. For example, dd if=/dev/zero of=/dev/sr0 bs=32768 count=2 gave the usual "read-only file system" message. After checking if the problem lies with my burner or firmware, i grep-ed the kernel source for EROFS. One of the results was in the cdrom driver. I tried to follow the function chain and ended in the cdrom_is_dvd_rw function where writing is permitted only for DVD-RAM and DVD+RW media. I added a new case label for 0x43 which is the profile name of BD-RE and now it works correctly for BD-RE too. Maybe there is a better way of implementing this, like a new function checking for blu-ray support and called from cdrom_open_write like it happens for mrw and dvdram media, but adding the case label worked. Thank you for your time. Signed-off-by:
-
Alexandra Yates authored
commit cdc5a311 upstream. Adding Intel codename Lewisburg platform device IDs for SMBus. Signed-off-by:
Alexandra Yates <alexandra.yates@linux.intel.com> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: Oliver Neukum <ONeukum@suse.com> Signed-off-by:
-
Jarkko Nikula authored
commit dd77f423 upstream. This patch adds the SMBUS PCI ID of Intel Broxton. Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
commit cadd16ea upstream. We've had many reports that some Creative sound cards with CA0132 don't work well. Some reported that it starts working after reloading the module, while some reported it starts working when a 32bit kernel is used. All these facts seem implying that the chip fails to communicate when the buffer is located in 64bit address. This patch addresses these issues by just adding AZX_DCAPS_NO_64BIT flag to the corresponding PCI entries. I casually had a chance to test an SB Recon3D board, and indeed this seems helping. Although this hasn't been tested on all Creative devices, it's safer to assume that this restriction applies to the rest of them, too. So the flag is applied to all Creative entries. Signed-off-by:
-
Quentin Casasnovas authored
commit 8c7188b2 upstream. Sasha's found a NULL pointer dereference in the RDS connection code when sending a message to an apparently unbound socket. The problem is caused by the code checking if the socket is bound in rds_sendmsg(), which checks the rs_bound_addr field without taking a lock on the socket. This opens a race where rs_bound_addr is temporarily set but where the transport is not in rds_bind(), leading to a NULL pointer dereference when trying to dereference 'trans' in __rds_conn_create(). Vegard wrote a reproducer for this issue, so kindly ask him to share if you're interested. I cannot reproduce the NULL pointer dereference using Vegard's reproducer with this patch, whereas I could without. Complete earlier incomplete fix to CVE-2015-6937: 74e98eb0 ("RDS: verify the underlying transport exists before creating a connection") Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by:
-
David Disseldorp authored
commit 8f903539 upstream. Cut 'n paste error saw it only process sizeof(t10_wwn.vendor) characters. Signed-off-by:
David Disseldorp <ddiss@suse.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Alexandra Yates authored
commit 56e74338 upstream. Adding Intel codename Lewisburg platform device IDs for SATA. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Johannes Thumshirn authored
commit a40cf3f3 upstream. Add device id for Marvell 88se91a2 Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Baoquan He authored
commit eb6db83d upstream. People reported that when allocating crashkernel memory using the ",high" and ",low" syntax, there were cases where the reservation of the high portion succeeds but the reservation of the low portion fails. Then kexec can load the kdump kernel successfully, but booting the kdump kernel fails as there's no low memory. The low memory allocation for the kdump kernel can fail on large systems for a couple of reasons. For example, the manually specified crashkernel low memory can be too large and thus no adequate memblock region would be found. Therefore, we try to reserve low memory for the crash kernel *after* the high memory portion has been allocated. If that fails, we free crashkernel high memory too and return. The user can then take measures accordingly. Tested-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Baoquan He <bhe@redhat.com> [ Massage text. ] Signed-off-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
-
Rainer Weikusat authored
[ Upstream commit 3822b5c2 ] With b3ca9b02, the AF_UNIX SOCK_STREAM receive code was changed from using mutex_lock(&u->readlock) to mutex_lock_interruptible(&u->readlock) to prevent signals from being delayed for an indefinite time if a thread sleeping on the mutex happened to be selected for handling the signal. But this was never a problem with the stream receive code (as opposed to its datagram counterpart) as that never went to sleep waiting for new messages with the mutex held and thus, wouldn't cause secondary readers to block on the mutex waiting for the sleeping primary reader. As the interruptible locking makes the code more complicated in exchange for no benefit, change it back to using mutex_lock. Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
[ Upstream commit 5233252f ] Signed-off-by:
-
WANG Cong authored
[ Upstream commit 09ccfd23 ] Reported-by:
Dmitry Vyukov <dvyukov@gmail.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit f6548615 ] skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit a6e18ff1 ] When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 5037e9ef ] David Wilder reported crashes caused by dst reuse. <quote David> I am seeing a crash on a distro V4.2.3 kernel caused by a double release of a dst_entry. In ipv4_dst_destroy() the call to list_empty() finds a poisoned next pointer, indicating the dst_entry has already been removed from the list and freed. The crash occurs 18 to 24 hours into a run of a network stress exerciser. </quote> Thanks to his detailed report and analysis, we were able to understand the core issue. IP early demux can associate a dst to skb, after a lookup in TCP/UDP sockets. When socket cache is not properly set, we want to store into sk->sk_dst_cache the dst for future IP early demux lookups, by acquiring a stable refcount on the dst. Problem is this acquisition is simply using an atomic_inc(), which works well, unless the dst was queued for destruction from dst_release() noticing dst refcount went to zero, if DST_NOCACHE was set on dst. We need to make sure current refcount is not zero before incrementing it, or risk double free as David reported. This patch, being a stable candidate, adds two new helpers, and use them only from IP early demux problematic paths. It might be possible to merge in net-next skb_dst_force() and skb_dst_force_safe(), but I prefer having the smallest patch for stable kernels : Maybe some skb_dst_force() callers do not expect skb->dst can suddenly be cleared. Can probably be backported back to linux-3.6 kernels Reported-by:
David J. Wilder <dwilder@us.ibm.com> Tested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Sergei Shtylyov authored
[ Upstream commit 248be83d ] In a low memory situation the following kernel oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = 8490c000 [00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.4-at16 #9) PC is at skb_put+0x10/0x98 LR is at sh_eth_poll+0x2c8/0xa10 pc : [<8035f780>] lr : [<8028bf50>] psr: 60000113 sp : 84eb1a90 ip : 84eb1ac8 fp : 84eb1ac4 r10: 0000003f r9 : 000005ea r8 : 00000000 r7 : 00000000 r6 : 940453b0 r5 : 00030000 r4 : 9381b180 r3 : 00000000 r2 : 00000000 r1 : 000005ea r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4248c059 DAC: 00000015 Process klogd (pid: 2046, stack limit = 0x84eb02e8) [...] This is because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left NULL but sh_eth_rx() later uses it without checking. Add such check... Reported-by:
Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 79462ad0 ] 郭永刚 reported that one could simply crash the kernel as root by using a simple program: int socket_fd; struct sockaddr_in addr; addr.sin_port = 0; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_family = 10; socket_fd = socket(10,3,0x40000000); connect(socket_fd , &addr,16); AF_INET, AF_INET6 sockets actually only support 8-bit protocol identifiers. inet_sock's skc_protocol field thus is sized accordingly, thus larger protocol identifiers simply cut off the higher bits and store a zero in the protocol fields. This could lead to e.g. NULL function pointer because as a result of the cut off inet_num is zero and we call down to inet_autobind, which is NULL for raw sockets. kernel: Call Trace: kernel: [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70 kernel: [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80 kernel: [<ffffffff81645069>] SYSC_connect+0xd9/0x110 kernel: [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80 kernel: [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200 kernel: [<ffffffff81645e0e>] SyS_connect+0xe/0x10 kernel: [<ffffffff81779515>] tracesys_phase2+0x84/0x89 I found no particular commit which introduced this problem. CVE: CVE-2015-8543 Cc: Cong Wang <cwang@twopensource.com> Reported-by:
郭永刚 <guoyonggang@360.cn> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 9470e24f ] SCTP is lacking proper np->opt cloning at accept() time. TCP and DCCP use ipv6_dup_options() helper, do the same in SCTP. We might later factorize this code in a common helper to avoid future mistakes. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit 01ce63c9 ] Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy related to disabling sock timestamp. When SCTP accepts an association or peel one off, it copies sock flags but forgot to call net_enable_timestamp() if a packet timestamping flag was copied, leading to extra calls to net_disable_timestamp() whenever such clones were closed. The fix is to call net_enable_timestamp() whenever we copy a sock with that flag on, like tcp does. Reported-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
-
Marcelo Ricardo Leitner authored
[ Upstream commit cb5e173e ] SCTP echoes a cookie o INIT ACK chunks that contains a timestamp, for detecting stale cookies. This cookie is echoed back to the server by the client and then that timestamp is checked. Thing is, if the listening socket is using packet timestamping, the cookie is encoded with ktime_get() value and checked against ktime_get_real(), as done by __net_timestamp(). The fix is to sctp also use ktime_get_real(), so we can compare bananas with bananas later no matter if packet timestamping was enabled or not. Fixes: 52db882f ("net: sctp: migrate cookie life from timeval to ktime") Signed-off-by:
-
Pavel Machek authored
[ Upstream commit f2a3771a ] atl1c driver is doing order-4 allocation with GFP_ATOMIC priority. That often breaks networking after resume. Switch to GFP_KERNEL. Still not ideal, but should be significantly better. atl1c_setup_ring_resources() is called from .open() function, and already uses GFP_KERNEL, so this change is safe. Signed-off-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Nicolas Dichtel authored
[ Upstream commit 6a61d4db ] Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Ben Hutchings authored
commit 5377adb0 upstream. usb_parse_ss_endpoint_companion() now decodes the burst multiplier correctly in order to check that it's <= 3, but still uses the wrong expression if warning that it's > 3. Fixes: ff30cbc8 ("usb: Use the USB_SS_MULT() macro to get the ...") Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
