into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs

Signed-off-by: Steve French (sfrench@us.ibm.com)

filemap_populate and shmem_populate must install even a linear file_pte,
in case there was a nonlinear page or file_pte already installed there:
could only happen if already VM_NONLINEAR, but no need to check that.

Acked by Ingo and Hugh.
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This takes advantage of the simplified typeof semantics of sparse
address spaces, (should be enough for alpha, i386, ppc, ppc64, sparc,
sparc64, x86_64 - most of them didn't actually need anything to be done)
and couple of missing annotations that got caught by that.

into kernel.bkbits.net:/home/davem/net-2.6

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs

Use NET_IP_ALIGN in acenic driver. Also remove the 16 byte padding,
caches can be anywhere from 16 to 256 bytes and the skb should be
cacheline aligned already.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David S. Miller <davem@redhat.com>

This patch replaces the skb argument in ipv6_clear_mutable_options() by
an ipv6hdr.  Doing so allows us to point skb->nh elsewhere when calling
this function.

I've also thrown in some obvious clean-ups for that function.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@redhat.com>

This is a little optimisation for AH4.  When I moved the tunnel code out,
I put the daddr copying code on the main path which is unnecessary since
daddr is only mutable if IP options are present.

This patch moves the saving and restoring of daddr under the check for
the existence of IP options.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@redhat.com>

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs

into nuts.davemloft.net:/disk1/BK/net-2.6

- We were statically predicting syscalls would be 32bit which meant every
  64bit syscall was guaranteed to be mispredicted. Just let the hardware
  predict this one.

- We shouldnt use blrl for indirect function calls, it is unlikely to be
  predicted correctly and corrupts the link prediction stack. We should
  use bctrl instead.

- Statically predict a branch in the system call path, favouring calls from
  userspace.

- Remove static prediction in pagefault path, hardware prediction should do
  a better job here.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It turns out in the non NUMA case, max_low_pfn doesnt get initialised
until init_bootmem so we need to move initialisation of max_pfn below
it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into hostme.bitkeeper.com:/repos/c/cifs/linux-2.5cifs

Signed-off-by: Steve French (sfrench@us.ibm.com)

I noticed excessive time in the pid hash functions on a ppc64 box. It
turns out the pid hash is being sized way too small, eg on a 16GB box:

PID hash table entries: 16 (order 4: 256 bytes)

The reason is that the pid hash init function uses max_pfn before it was
setup on ppc64. With the following patch things are good again:

PID hash table entries: 4096 (order 12: 65536 bytes)
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

retransmitted. Also mark any chunks that could not be fit in the
PMTU sized packet as ineligible for fast retransmit.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

Minor 0 vs NULL cleanup
Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@redhat.com>

The cycle counter it provides overflows very quickly,
on the order of 10 minutes, so it is not suitable for
this purpose.
Signed-off-by: David S. Miller <davem@redhat.com>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@redhat.com>

As we discussed before, mutable headers should not be allowed after
the AH header.  In fact, this appears to be the intention of RFC 2402.
It is further clarified in section 3.1.1 of

http://www.ietf.org/internet-drafts/draft-ietf-ipsec-rfc2402bis-07.txt

This allows us to simplify the code in ah6.c.  As a result, this also
fixes the following issues:

* Dependence on skb->h in ah6_output().
* Bogus clearing of auth_data of 2nd AH header in ipv6_clear_mutable_options().
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@redhat.com>

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@redhat.com>

into nuts.davemloft.net:/disk1/BK/net-2.6

On some platforms, you'll want to support READ_IMPLIES_EXEC differently
depending on personality (e.g, native binary vs. x86 binary).

This supports that (and makes the code more readable while at it) by
replacing the old architecture-specific fixed LEGACY_BINARIES macro
define with a architecture-specific "elf_read_implies_exec_binary()"
helper function.

For now, x86 is the only user, and sets the "read implies exec" bit for
legacy apps.  ia64 and x86-64 are likely to want to do their own thing.

Acked by Ingo.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

sctp_sm_pull_sack().
Signed-off-by: Jorge Hernandez <jhh@lucent.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

an associd of 0.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

associations.
Signed-off-by: Jorge Hernandez <jhh@lucent.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

   
Also cleaned up sctp_sf_eat_data_6_2() and sctp_sf_eat_data_fast_4_4()
as they have a lot of common code.
Signed-off-by: Jorge Hernandez <jhh@lucent.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

and peer address are 0.
Signed-off-by: Anand R. Setlur <asetlur@lucent.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>

This makes it much easier on the callers, no need to
worry about races with vmtruncate() and friends, since
"install_page()" will just cleanly handle that case
and tell the caller about it.

Add is_highmem_idx() and is_normal_idx() to determine whether
a zone index is a highmem or normal zone.  Use this for
memmap_init_zone().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@redhat.com>

Don't bother zeroing the allocated memory inside alloc_buf() in the
n_tty line discipline.  alloc_buf() is static inline and is only
referenced by n_tty_open() which always clears the memory (once more).

No bug, just a minor cleanup

Asus also "hides" the LPC bridge on M2N notebooks. Add it to
the asus_hides_smbus PCI quirk.

Fixes bug #2976 @ http://bugme.osdl.org/show_bug.cgi?id=2976Signed-off-by: Dominik Brodowski <linux@brodo.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>