* topic/oxygen:
  sound: oxygen: work around MCE when changing volume

* topic/oss:
  ALSA: allocation may fail in	snd_pcm_oss_change_params()
  sound: vwsnd: Fix setting of cfgval and ctlval in li_setup_dma()
  sound: fix OSS MIDI output data loss

* topic/misc:
  ALSA: Remove unneeded ifdef from sound/core.h
  ALSA: Remove struct snd_monitor_file from public sound/core.h
  ALSA: Release v1.0.21

* topic/midi:
  sound: rawmidi: disable active-sensing-on-close by default
  sound: seq_oss_midi: remove magic numbers
  sound: seq_midi: do not send MIDI reset when closing
  seq-midi: always log message on output overrun

* topic/ice1724-pm:
  ALSA: ice1724 - Fix section mismatch
  ALSA: ice1724 - Patch for suspend/resume for Audiotrak Prodigy HD2

* topic/hdsp:
  ALSA: hdsp - allow proc reporting with disconnected io box

* topic/hda: (92 commits)
  ALSA: hda - Use auto model for HP laptops with ALC268 codec
  ALSA: hda/realtek: Added support for CLEVO M540R subsystem, 6 channel + digital
  ALSA: hda - Add support of Alienware M17x laptop
  ALSA: hda - Remove dead codes from patch_sigmatel.c
  ALSA: hda - Fix input source selection of IDT92HD73xx
  ALSA: hda - Fix obsolete CONFIG_SND_DEBUG_DETECT
  ALSA: hda - Unmute docking line-out as default with AD1984A codec
  ALSA: hda - Add another entry for Nvidia HDMI device
  ALSA: hda - Add missing GPIO initialization for AD1984A laptop model
  ALSA: hda - Add support of docking auto-mute/mic for AD1984A laptop model
  ALSA: hda - Fix ALC268/ALC269 headphone pin routing
  ALSA: hda - Create "Digital Mic Capture Volume" correctly for IDT codecs
  ALSA: hda - Add more quirk for HP laptops with AD1984A
  ALSA: hda - Add / fix model entries for HD-audio driver
  ALSA: hda - Add full audio support on Acer Aspire 7730G notebook
  ALSA: hda - Improve auto-cfg mixer name for ALC662
  ALSA: hda - Improve auto-cfg mixer name for ALC861-VD
  ALSA: hda - Improve auto-cfg mixer name for ALC262
  ALSA: hda - Improve auto-cfg mixer name for ALC260
  ALSA: hda - Improve auto-cfg mixer name for ALC880
  ...

* topic/dummy:
  ALSA: dummy - Increase MAX_PCM_SUBSTREAMS to 128
  ALSA: dummy - Add debug proc file
  ALSA: Add const prefix to proc helper functions
  ALSA: Re-export snd_pcm_format_name() function
  ALSA: dummy - Fake buffer allocations
  ALSA: dummy - Fix the timer calculation in systimer mode
  ALSA: dummy - Add more description
  ALSA: dummy - Better jiffies handling
  ALSA: dummy - Support high-res timer mode

* topic/dma-sgbuf:
  ALSA: Fix SG-buffer DMA with non-coherent architectures

* topic/ctxfi:
  ALSA: ctxfi - Simple code clean up
  ALSA: ctxfi - Native timer support for emu20k2

* topic/ctl-add-remove-fixes:
  sound: snd_ctl_remove_user_ctl: prevent removal of kernel controls
  sound: snd_ctl_remove_unlocked_id: simplify user control counting
  sound: snd_ctl_remove_unlocked_id: simplify error paths
  sound: snd_ctl_elem_add: fix value count check

* topic/cs46xx:
  ALSA: cs46xx - Fix minimum period size

* topic/cmi8330:
  ALSA: cmi8330: Allow MPU-401-less operation
  ALSA: cmi8330: find OPL3 port automatically
  cmi8330: Add basic CMI8329 support
  ALSA: cmi8330: revert comments about AD1848 back

* topic/cleanup:
  ALSA: info - Use krealloc()

* topic/azt3328:
  ALSA: azt3328: fix previous breakage, improve suspend, cleanups
  ALSA: azt3328: large codec cleanup, add I2S port etc.
  ALSA: azt3328: fix Kconfig entry

* topic/asoc: (226 commits)
  ASoC: au1x: PSC-AC97 bugfixes
  ASoC: Fix WM835x Out4 capture enumeration
  ASoC: Remove unuused hw_read_t
  ASoC: fix pxa2xx-ac97.c breakage
  ASoC: Fully specify DC servo bits to update in wm_hubs
  ASoC: Debugged improper setting of PLL fields in WM8580 driver
  ASoC: new board driver to connect bfin-5xx with ad1836 codec
  ASoC: OMAP: Add functionality to set CLKR and FSR sources in McBSP DAI
  ASoC: davinci: i2c device creation moved into board files
  ASoC: Don't reconfigure WM8350 FLL if not needed
  ASoC: Fix s3c-i2s-v2 build
  ASoC: Make platform data optional for TLV320AIC3x
  ASoC: Add S3C24xx dependencies for Simtec machines
  ASoC: SDP3430: Fix TWL GPIO6 pin mux request
  ASoC: S3C platform: Fix s3c2410_dma_started() called at improper time
  ARM: OMAP: McBSP: Merge two functions into omap_mcbsp_start/_stop
  ASoC: OMAP: Fix setup of XCCR and RCCR registers in McBSP DAI
  OMAP: McBSP: Use textual values in DMA operating mode sysfs files
  ARM: OMAP: DMA: Add support for DMA channel self linking on OMAP1510
  ASoC: Select core DMA when building for S3C64xx
  ...

* topic/ali5451-cleanup:
  ALSA: ali5451: remove dead code

Andy Whitcroft reported an oops in aoe triggered by use of an
incorrectly initialised request_queue object:

  [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add
		an uninitialized object, something is seriously wrong.
  [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu
  [ 2645.959107] Call Trace:
  [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70
  [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0
  [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160
  [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe]

The request queue of an aoe device is not used but can be allocated in
code that does not sleep.

Bruno bisected this regression down to

  cd43e26f

  block: Expose stacked device queues in sysfs

"This seems to generate /sys/block/$device/queue and its contents for
 everyone who is using queues, not just for those queues that have a
 non-NULL queue->request_fn."

Addresses http://bugs.launchpad.net/bugs/410198
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942

Note that embedding a queue inside another object has always been
an illegal construct, since the queues are reference counted and
must persist until the last reference is dropped. So aoe was
always buggy in this respect (Jens).
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

Reinette Chatre reports a frozen system (with blinking keyboard LEDs)
when switching from graphics mode to the text console, or when
suspending (which does the same thing). With netconsole, the oops
turned out to be

	BUG: unable to handle kernel NULL pointer dereference at 0000000000000084
	IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915]

and it's due to the i915_gem.c code doing drm_irq_uninstall() after
having done i915_gem_idle(). And the i915_gem_idle() path will do

  i915_gem_idle() ->
    i915_gem_cleanup_ringbuffer() ->
      i915_gem_cleanup_hws() ->
        dev_priv->hw_status_page = NULL;

but if an i915 interrupt comes in after this stage, it may want to
access that hw_status_page, and gets the above NULL pointer dereference.

And since the NULL pointer dereference happens from within an interrupt,
and with the screen still in graphics mode, the common end result is
simply a silently hung machine.

Fix it by simply uninstalling the irq handler before idling rather than
after. Fixes

    http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes the following bugs:

- only reprogram bitdepth if it has changed since last call to hw_params.
- add locking inside ac97_read/write functions:
  When reprogramming sample depth, the ac97 unit has to be disabled,
  which should not be done in the middle of codec register accesses.

- retry timed-out codec register accesses.

- wait for status bits to set/clear when starting/stopping various
  functional blocks; very important after reenabling AC97 unit else
  sound may be distorted (e.g. high-pitch noise in 1kHz sine wave).

- clear fifos before/after starting/stopping RX/TX.

- longer timeouts waiting for PSC/AC97 ready after cold reset
  with certain codecs this can take ridiculous amounts of time.

Run-tested on various Au1200 platforms with various codecs.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

eDP is exclusive connector too, and add missing crtc_mask
setting for TV.

This fixes

	http://bugzilla.kernel.org/show_bug.cgi?id=14139Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Increase the limit of PCM substreams to 128.  The default value is
unchanged; only the max accept value is increased.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Added the debug proc file to see or change the snd_pcm_hardware fields
to emulate.  The parameters can be changed by writing to a proc file like:

    # echo periods_min 4 > /proc/asound/card1/dummy_pcm
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Add appropriate const prefix to char * arguments in proc helper functions.
Also fixed the caller side to be proper const pointers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Re-export snd_pcm_format_name() function to be used outside the PCM core.
As a first example, usbaudio is changed to use it now again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The HP laptops with ALC268 codec seem working better with model=auto
than model=toshiba; e.g. the auto model fixes missing digital outputs.
Let's fix quirk entry to choose auto model explicitly.
Tested-by: Jens Jorgensen <jbj1@ultraemail.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix minimum period size for cs46xx cards. This fixes a problem in the
case where neither a period size nor a buffer size is passed to ALSA;
this is the case in Audacious, OpenAL, and others.
Signed-off-by: Sophie Hamilton <kernel@theblob.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  IMA: update ima_counts_put

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  gianfar: Fix build.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  pcmcia: add CNF-CDROM-ID for ide

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  agp/intel: support for new chip variant of IGDNG mobile
  drm/i915: Unref old_obj on get_fence_reg() error path
  drm/i915: increase default latency constant (v2 w/comment)

It's the 8th enum of a zero indexed array. This is why I don't let
new drivers use these arrays of enums...
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

Remove the old hack that was needed for building alsa-driver modules
externally for old kernels.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The struct snd_monitor_file is used locally only in sound/core/init.c,
thus it should be moved there from the public sound/core.h.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

When the volume is changed continuously (e.g., when the user drags a
volume slider with the mouse), the driver does lots of I2C writes.
Apparently, the sound chip can get confused when we poll the I2C status
register too much, and fails to complete a read from it.  On the PCI-E
models, the PCI-E/PCI bridge gets upset by this and generates a machine
check exception.

To avoid this, this patch replaces the polling with an unconditional
wait that is guaranteed to be long enough.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Tested-by: Johann Messner <johann.messner at jku.at>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Instead of allocating the real buffers, use a fake buffer and ignore
read/write in the dummy driver so that we can save the resources.
For mmap, a single page (unique to the direction, though) is reused
to all buffers.

When the app requires to read/write the real buffers, pass fake_buffer=0
module option at loading time.  This will get back to the old behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>

The model clevo-m540r was created with 6-channel and digital support. All
functions verified except spdif. Tested with a VIT D2000 laptop which has:

[lspci extract]
 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 03)
        Subsystem: CLEVO/KAPOK Computer Device [1558:5409]

[/proc/asound/card0/codec\#0 header]
Codec: Realtek ALC883
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0883
Subsystem Id: 0x15585409
Revision Id: 0x100002

[Added a comment about HP mute and the model description by tiwai]
Signed-off-by: Dhionel Diaz <ddiaz@cenditel.gob.ve>
Signed-off-by: Takashi Iwai <tiwai@suse.de>