- 12 Aug, 2012 24 commits
-
-
Ezequiel García authored
This driver has been replaced by stk1160. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Ezequiel García authored
This driver adds support for stk1160 usb bridge as used in some video/audio usb capture devices. It is a complete rewrite of staging/media/easycap driver and it's meant as a replacement. As stk1160 allows communication with an ac97 codec chip, this driver allows to register a control-only sound card to allow the user to access ac97 controls. Two devices have been used for testing: * 1-cvbs video and 1-audio ac97 input, * 4-cvbs inputs Both of these devices reports with the same id [05e1:0408], so the driver tries to support a superset of the capabilities. By using keep_buffers module parameter it's possible to prevent the driver from releasing urb buffers when streaming is stopped. The usage of this parameter can avoid memory fragmentation that may cause the driver to stop working on low memory systems. A similar mechanism is implemented in em28xx driver (see commit 86d38d). Signed-off-by:
-
Dan Carpenter authored
qt1010_init_meas2() returns zero on success and negative error codes on failure so the return type should be int instead of u8. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Trivial fix. Signed-off-by:
-
Antti Palosaari authored
Signed-off-by:
-
Antti Palosaari authored
Trivial fix. Signed-off-by:
-
Alan Cox authored
If we set mantis->fe to NULL on an error its not a good idea to then try passing NULL to the unregister paths and oopsing really. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
-
Nicolas THERY authored
The MEDIA_IOC_DEVICE_INFO ioctl was returning a positive value rather than a negative error code when failing to copy output parameter to user-space. Tested by compilation only. Signed-off-by:
Nicolas Thery <nicolas.thery@st.com> Signed-off-by:
-
Antti Palosaari authored
Cc: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Those files were at the wrong place, probably due to the usage of a previous version of dvb-usb-v2 tree. Signed-off-by: -
Malcolm Priestley authored
Conversion of lmedm04 to dvb-usb-v2 Functional changes m88rs2000 tuner now uses all callbacks. TODO migrate other tuners to the callbacks. This patch is applied on top of [BUG] Re: dvb_usb_lmedm04 crash Kernel (rs2000) http://patchwork.linuxtv.org/patch/13584/Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Acked-by:
-
Mauro Carvalho Chehab authored
This DVB_FE_IOCTL_POST isn't used, so remove it. Also, intercepting ioctl's like that only works with legacy ioctl's, due to the way it was implemented. so this design is broken. Document it. Signed-off-by: -
Devendra Naga authored
structure variables can be assigned, no memcpy needed, remove the memcpy and use assignment for the cfg and en variables. Tested by Compilation Only Suggested-by:
Devendra Naga <develkernel412222@gmail.com> Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Devendra Naga authored
[media] staging: media: cxd2099: use kzalloc to allocate ci pointer of type struct cxd in cxd2099_attach this does kmalloc and followed by memset, calling kzalloc will actually sets the allocated memory to zero, use kzalloc instead Signed-off-by:
-
Devendra Naga authored
The following sparse warnings were fixed drivers/staging/media/cxd2099/cxd2099.c:686:26: warning: Using plain integer as NULL pointer drivers/staging/media/cxd2099/cxd2099.c:691:24: warning: Using plain integer as NULL pointer drivers/staging/media/cxd2099/cxd2099.c:696:24: warning: Using plain integer as NULL pointer Signed-off-by:
-
Mauro Carvalho Chehab authored
This was introduced on commit c2a6b54a: "em28xx: fix: don't do image interlacing on webcams" The proposed patch by Ezequiel is wrong. The right fix here is to just don't bother here if either the image is progressive or not. Reported-by:
-
Tim Gardner authored
Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: linux-media@vger.kernel.org Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
-
Nicolas THERY authored
Fix "symbol 'vb2_vmalloc_memops' was not declared. Should it be static?" sparse warning. Signed-off-by:
-
Hans Petter Selasky authored
>From 59306435992d9349f10ad82a8adf14d98becbbe8 Mon Sep 17 00:00:00 2001 Signed-off-by:
Hans Petter Selasky <hselasky@c2i.net> Signed-off-by:
-
Malcolm Priestley authored
There is a missing error handling when no firmware file found. It seems that this is more of a problem with udev-182+. However, so far udev-182 is only a problem on first ever plug. Signed-off-by:
-
Patrice Chotard authored
This code is based on ngene initial check-in (dae52d00) Signed-off-by:
Patrice Chotard <patricechotard@free.fr> Signed-off-by:
-
Patrice Chotard authored
Add support for Thomson DTT7520X pll needed by ngene card Terratec Cynergy 2400i DT Signed-off-by:
-
- 11 Aug, 2012 16 commits
-
-
Sean Young authored
This remote sends a header pulse of 8150us followed by a space of 4000us. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Michael Jones authored
[mchehab@redhat.com: fix a merge conflict at Documentation/video4linux/v4l2-framework.txt] Signed-off-by:
Michael Jones <michael.jones@matrix-vision.de> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Add the missing AUDIO_* ioctls and document the V4L2 replacements for the various DVB AUDIO ioctls that were (ab)used by V4L2. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
- update 2011 to 2012 for copyrights - update V4L2 spec version to 3.6 - update the intro to also refer to part four: the Media Controller - fix an incorrect revision section - fix an incorrect 3.6 kernel changes section Signed-off-by:
-
Hans Verkuil authored
Remove documentation chunk of non-existent V4L2_CID_AUTO_FOCUS_AREA control. It fixes following build error: Error: no ID for constraint linkend: v4l2-auto-focus-area. Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
The resizer can output YUYV and UYVY in a wide range of sizes, making it the best video node for regular V4L2 applications. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Laurent Pinchart authored
Enable the bridge automatically when the input format is YUYV8 or UYVY8. Signed-off-by:
-
Laurent Pinchart authored
The structure is only used to store configuration data and pass it to CCDC configuration functions. Access the data directly from the locations that need it. Signed-off-by:
-
Laurent Pinchart authored
Those features are half-implemented and not used. Remove them. Signed-off-by:
-
Ivaylo Petrov authored
Tested with ov9740 and struct isp_csi2_platform_data { .interface = ISP_INTERFACE_CSI2A_PHY2, .bus = { .csi2 = { .crc = 1, .vpclk_div = 1, } }, } Signed-off-by:Ivaylo Petrov <ivpetrov@mm-sol.com> Signed-off-by:
-
Laurent Pinchart authored
Signed-off-by:
-
