Bringing up a module can be time consuming, as that may require lots of
initialization on the module side. Over that, we may also need to
download the firmware first and flash that on the module.

In order to make other hotplug events to not wait for all this to
finish, handle most of module hotplug stuff outside of the hotplug
callback, with help of a workqueue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Print (expected-payload-size actual-payload-size), when the size doesn't
match for requests received by the module. This gives more details
required for debugging the issue.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

These were not defined, and I just posted patches that use them.
Signed-off-by: Alex Elder <elder@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The error paths in gb_loopback_connection_init() are kind of screwed
up--not in proper order, and the label naming convention seems a
little inconsistent.

Fix this, ensuring each error cleans up the setup that's been done
up to that point.  Use the convention that the label indicates the
first thing that needs to be cleaned up.

Reorder the statements in gb_loopback_connection_exit() to match
the order of cleanup in gb_loopback_connection_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Stop recording and updating the average every time a sample
is recorded.  Instead, compute it from the sum and count only
when it's required.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Define a separate macro for displaying the average of the samples
collected.  This will be used so we can calculate the average only
when requested, rather than every time a new value gets recorded.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The only values passed to the gb_loopback_ro_attr() macro are
unsigned 32-bit values.  So there's no need to pass a "type"
format specifier.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The error count is unsigned, so fix the format specifier used in its
attribute definition.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The count of statistical samples recorded is currently a 64-bit
value.  32 bits is sufficient, and in fact anything more than
that won't work for the do_div() call it's pass to anyway.  So make
the count field be 32 bits.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The minimum and maximum values for stats values are always 32 bits.
Change the type for these fields to reflect this.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The only values supplied to gb_loopback_update_stats() are 32-bits,
so change the type of the second argument to reflect that.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Use the largest representable value when initializing the "min"
field when resetting loopback statistics.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

There is no need to cast a void pointer to a particular type.
Drop the casts used in this way, mainly in the attribute definition
macros.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix two misspellings.  And add spaces around a '%' operator.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add a public declaration for gb_interface_destroy(), matching
gb_interface_create().

It's not yet used outside "interface.c" but I suppose it
could be, and its scope is currently public.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

That's the style we follow for kernel code.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Handle some merge conflicts in greybus_protocols.h due to changes on the
same structure in both branches.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

For consistency reasons, use only type attributes for message packing.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add missing packed attributes to prevent implicit structure padding.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add missing packed attributes to prevent implicit structure padding.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Add missing packed attributes to prevent implicit structure padding.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix misspelled variable name in comment.
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This should be exposed to external users (like gbsim). Move it to
greybus_protocols.h.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The buffers allocated for message header is already 64 bit aligned and
we have explicit pad bytes in the header structure, to 64 bit align the
operation specific data.

And so there is no need to add the aligned attribute to the operation
message header. Drop it.
Suggested-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Get the USB driver fixes in this branch to prevent oopses from happening
when the USB host driver protocol is found in a manifest.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The USB bridged-PHY protocol driver currently depends on changes to USB
core that are not yet upstream.

Disable for now.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Implement the hub_control callback.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix hc_driver description, product_desc and flags fields.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Fix allocation, deregistration and deallocation of USB HCD, and update
the hcd_priv helper functions.

The HCD private data was not allocated correctly, something which would
lead to a crash when accessed in hcd_start. The HCD was neither
reregistered or deallocated on connection tear down.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Renumber the current operation types.

NOTE: Protocol change.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Remove unused, broken or unneeded code and constructs.
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This reverts commit 60b1d71fdfc2c5266051a1297df01ea0b1f3ba99 as we want
the port number to be correct in the svc branch.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

This is required to get things working for now, after the latest revert
of svc protocol is done.

Currently svc's cport id is set to 2 and that hd cport id will be used
for the third connection we make. And that protocol (which is i2c in one
of the cases), may not work as the (dis)connected event isn't sent for
it.

Fix this by getting rid of svc protocol check from (dis)connected
events for now. This must be reverted later, once svc protocol is
included again.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Mark Greer <mgreer@animalcreek.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Its really part of initializing the host device and is required for
every 'hd' that is created. Lets move the call to do basic
initialization of svc connection to greybus_create_hd().

Also add a comment to specify why we need to do it that early.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

The svc connection needs to be ready before creating the URBs, otherwise
the svc version request might come in before the AP was ready to parse
them.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>