- 08 Aug, 2018 8 commits
-
-
Jiri Olsa authored
We have more current function tto get the title for annotation, which is hists__scnprintf_title. They both have same output as far as the annotation's header line goes. They differ in counting of the nr_samples, hists__scnprintf_title provides more accurate number based on the setup of the symbol_conf.filter_relative variable. Plus it also displays any uid/thread/dso/socket filters/zooms if there are set any, which annotation__scnprintf_samples_period does not. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/20180804130521.11408-4-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
There's no outside user of it. Signed-off-by:
-
Jiri Olsa authored
There's no outside user of it. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Allowing one to hook into the syscalls:sys_enter_NAME tracepoints, an example is provided that hooks into the 'openat' syscall. Using it with the probe:vfs_getname probe into getname_flags to get the filename args as it is copied from userspace: # perf probe -l probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname) # perf trace -e probe:*getname,tools/perf/examples/bpf/sys_enter_openat.c cat /etc/passwd > /dev/null 0.000 probe:vfs_getname:(ffffffffbd2a8983) pathname="/etc/ld.so.preload" 0.022 syscalls:sys_enter_openat:dfd: CWD, filename: 0xafbe8da8, flags: CLOEXEC 0.027 probe:vfs_getname:(ffffffffbd2a8983) pathname="/etc/ld.so.cache" 0.054 syscalls:sys_enter_openat:dfd: CWD, filename: 0xafdf0ce0, flags: CLOEXEC 0.057 probe:vfs_getname:(ffffffffbd2a8983) pathname="/lib64/libc.so.6" 0.316 probe:vfs_getname:(ffffffffbd2a8983) pathname="/usr/lib/locale/locale-archive" 0.375 syscalls:sys_enter_openat:dfd: CWD, filename: 0xe2b2b0b4 0.379 probe:vfs_getname:(ffffffffbd2a8983) pathname="/etc/passwd" # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2po9jcqv1qgj0koxlg8kkg30@git.kernel.orgSigned-off-by: -
Yury Norov authored
bitmap_zero() is called after bitmap_alloc() in perf code. But bitmap_alloc() internally uses calloc() which guarantees that allocated area is zeroed. So following bitmap_zero is unneeded. Drop it. This happened because of confusing name for bitmap allocator. It should has name bitmap_zalloc instead of bitmap_alloc. This series: https://lkml.org/lkml/2018/6/18/841 introduces a new API for bitmap allocations in kernel, and functions there are named correctly. Following patch propogates the API to tools, and fixes naming issue. Signed-off-by:
Yury Norov <ynorov@caviumnetworks.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: David Carrillo-Cisneros <davidcc@google.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Link: http://lkml.kernel.org/r/20180623073502.16321-1-ynorov@caviumnetworks.comSigned-off-by:
-
Sean V Kelley authored
This patch adds the Ampere Computing eMAG file. This platform follows the ARMv8 recommended IMPLEMENTATION DEFINED events, where applicable. Signed-off-by:
Sean V Kelley <seanvk.dev@oregontracks.org> Reviewed-by:
John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: William Cohen <wcohen@redhat.com> Cc: linux-arm-kernel@lists.infradead.org LPU-Reference: 20180803041811.17065-1-seanvk.dev@oregontracks.org Signed-off-by:
-
Thomas Richter authored
Add support for s390 auxiliary trace support. Use 'perf record -e rbd000 -- ls' to create the perf.data file. Use 'perf report' to display the auxiliary trace data. Output before: [root@s35lp76 perf]# ./perf report --stdio 0x128 [0x10]: failed to process type: 70 Error: failed to process sample [root@s35lp76 perf]# Output after: [root@s35lp76 perf]# ./perf report --stdio 18.21% 18.21% ls [kernel.kallsyms] [k] ftrace_likely_update 9.52% 9.52% ls [kernel.kallsyms] [k] lock_acquire 9.38% 9.38% ls [kernel.kallsyms] [k] lock_release 3.45% 3.45% ls [kernel.kallsyms] [k] lock_acquired 2.88% 2.88% ls [kernel.kallsyms] [k] link_path_walk 2.63% 2.63% ls [kernel.kallsyms] [k] __d_lookup 2.38% 2.38% ls [kernel.kallsyms] [k] __d_lookup_rcu 2.04% 2.04% ls [kernel.kallsyms] [k] ___might_sleep 1.83% 1.83% ls [kernel.kallsyms] [k] debug_lockdep_rcu_enabled 1.44% 1.44% ls [kernel.kallsyms] [k] dput .... Signed-off-by:Thomas Richter <tmricht@linux.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180802074622.13641-4-tmricht@linux.ibm.com [ Use PRI[xd]64 to fix the build on debian:experimental-x-mips (gcc 8.1.0) and others ] Signed-off-by:
-
Thomas Richter authored
Add support for s390 auxiliary trace support. Use 'perf record -e rbd000' to create the perf.data file. The event also has the symbolic name SF_CYCLES_BASIC_DIAG, using 'perf record -e SF_CYCLES_BASIC_DIAG' is equivalent. Use 'perf report -D' to display the auxiliary trace data. Output before: 0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000 offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4 Nothing else Output after: 0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000 offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4 . . ... s390 AUX data: size 262144 bytes [00000000] Basic Def:0001 Inst:0000 TW AS:3 ASN:0xffff IA:0x0000000000c2f1bc CL:1 HPP:0x8000000000000000 GPP:000000000000000000 [0x000020] Diag Def:8005 [0x0000bf] Basic Def:0001 Inst:0000 TW AS:3 ASN:0xffff IA:0x0000000000c2f1bc CL:1 HPP:0x8000000000000000 GPP:000000000000000000 [0x0000df] Diag Def:8005 [0x00017e] Basic Def:0001 Inst:0000 TW AS:3 ASN:0xffff IA:0x0000000000c2f1bc CL:1 HPP:0x8000000000000000 GPP:000000000000000000 .... [0x000fc0] Trailer F T bsdes:32 dsdes:159 Overflow:0 Time:0xd4ab59a8450fa108 C:1 TOD:0xd4ab4ec98ceb3832 1:0x8000000000000000 2:0xd4ab4ec98ceb3832 This output is shown for every sampled data block. The output contains the - basic-sampling data entry - diagnostic-sampling data entry - trailer entry The basic sampling entry and diagnostic sampling entry sizes can be extracted using the trailer entries in the SDB. On older hardware these values (bsdes and dsdes in the trailer entry) are reserved and zero. Older hardware use hard coded values based on the s390 machine type. Signed-off-by:
-
- 03 Aug, 2018 1 commit
-
-
Thomas Richter authored
Add initial support for s390 auxiliary traces using the CPU-Measurement Sampling Facility. Support and ignore PERF_REPORT_AUXTRACE_INFO records in the perf data file. Later patches will show the contents of the auxiliary traces. Setup the auxtrace queues and data structures for s390. A raw dump of the perf.data file now does not show an error when an auxtrace event is encountered. Output before: [root@s35lp76 perf]# ./perf report -D -i perf.data.auxtrace 0x128 [0x10]: failed to process type: 70 Error: failed to process sample 0x128 [0x10]: event: 70 . . ... raw event: size 16 bytes . 0000: 00 00 00 46 00 00 00 10 00 00 00 00 00 00 00 00 ...F............ 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 0 [root@s35lp76 perf]# Output after: # ./perf report -D -i perf.data.auxtrace |fgrep PERF_RECORD_AUXTRACE 0 0 0x128 [0x10]: PERF_RECORD_AUXTRACE_INFO type: 5 0 0 0x25a66 [0x30]: PERF_RECORD_AUXTRACE size: 0x40000 offset: 0 ref: 0 idx: 4 tid: -1 cpu: 4 .... Additional notes about the underlying hardware and software implementation, provided by Hendrik Brueckner (see Link: below). ============================================================================= The CPU-Measurement Facility (CPU-MF) provides a set of functions to obtain performance information on the mainframe. Basically, it was introduced with System z10 years ago for the z/Architecture, that means, 64-bit. For Linux, there are two facilities of interest, counter facility and sampling facility. The counter facility provides hardware counters for instructions, cycles, crypto-activities, and many more. The sampling facility is a hardware sampler that when started will write samples at a particular interval into a sampling buffer. At some point, for example, if a sample block is full, it generates an interrupt to collect samples (while the sampler continues to run). Few years ago, I started to provide the a perf PMU to use the counter and sampling facilities. Recently, the device driver was updated to also "export" the sampling buffer into the AUX area. Thomas now completed the related perf work to interpret and process these AUX data. If people are more interested in the sampling facility, they can have a look into: - The Load-Program-Parameter and the CPU-Measurement Facilities, SA23-2260-05 http://www-01.ibm.com/support/docview.wss?uid=isg26fcd1cc32246f4c8852574ce0044734a and to learn how-to use it for Linux on Z, have look at chapter 54, "Using the CPU-measurement facilities" in the: - Device Drivers, Features, and Commands, SC33-8411-34 http://public.dhe.ibm.com/software/dw/linux390/docu/l416dd34.pdf ============================================================================= Signed-off-by:
-
- 02 Aug, 2018 8 commits
-
-
Arnaldo Carvalho de Melo authored
Now it looks just about the same as for the trace__sys_{enter,exit}. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y59may7zx1eccnp4m3qm4u0b@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Mapping "__syscall_nr" to "id" and setting up "args" from the offset of "__syscall_nr" + sizeof(u64), as the payload for syscalls:* is the same as for raw_syscalls:*, just the fields have different names. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-ogeenrpviwcpwl3oy1l55f3m@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To avoid having to ask libtraceevent to find a field by name when handling each tracepoint event, we setup a struct syscall_tp with a tp_field struct having an extractor function + the offset for the "id", "args" and "ret" raw_syscalls:sys_{enter,exit} tracepoints. Now that we want to do the same with syscalls:sys_{entry,exit}_NAME individual syscall tracepoints, where we have "id" as "__syscall_nr" and "args" as the actual series of per syscall parameters, we need more flexibility from the routines that set up these pre-looked up syscall tracepoint arg fields. The next cset will use it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-v59q5e0jrlzkpl9a1c7t81ni@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Because raw_syscalls have the field for the syscall number as 'id' while the syscalls:sys_{enter,exit}_NAME have it as __syscall_nr... Since we want to support both for being able to enable just a syscalls:sys_{enter,exit}_name instead of asking for raw_syscalls:sys_{enter,exit} plus filters, make the method names for each kind of tracepoint more explicit. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4rixbfzco6tsry0w9ghx3ktb@git.kernel.orgSignef-off-by: -
Arnaldo Carvalho de Melo authored
We were using the beautifiers only when processing the raw_syscalls:sys_enter events, but we can as well use them for the syscalls:sys_enter_NAME events, as the layout is the same. Some more tweaking is needed as we're processing them straight away, i.e. there is no buffering in the sys_enter_NAME event to wait for things like vfs_getname to provide pointer contents and then flushing at sys_exit_NAME, so we need to state in the syscall_arg that this is unbuffered, just print the pointer values, beautifying just non-pointer syscall args. This just shows an alternative way of processing tracepoints, that we will end up using when creating "tracepoint" payloads that already copy pointer contents (or chunks of it, i.e. not the whole filename, but just the end of it, not all the bf for a read/write, but just the start, etc), directly in the kernel using eBPF. E.g.: # perf trace -e syscalls:*enter*sleep,*sleep sleep 1 0.303 ( ): syscalls:sys_enter_nanosleep:rqtp: 0x7ffc93d5ecc0 0.305 (1000.229 ms): sleep/8746 nanosleep(rqtp: 0x7ffc93d5ecc0) = 0 # perf trace -e syscalls:*_*sleep,*sleep sleep 1 0.288 ( ): syscalls:sys_enter_nanosleep:rqtp: 0x7ffecde87e40 0.289 ( ): sleep/8748 nanosleep(rqtp: 0x7ffecde87e40) ... 1000.479 ( ): syscalls:sys_exit_nanosleep:0x0 0.289 (1000.208 ms): sleep/8748 ... [continued]: nanosleep()) = 0 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-jehyd2zwhw00z3p7v7mg9632@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
When the vfs_getname() wannabe tracepoint is in place: # perf probe -l probe:vfs_getname (on getname_flags:73@acme/git/linux/fs/namei.c with pathname) # 'perf trace' will use it to get the pathname when it is copied from userspace to the kernel, right after syscalls:sys_enter_open, copied in the 'probe:vfs_getname', stash it somewhere and then, at syscalls:sys_exit_open time, if the 'open' return is not -1, i.e. a successfull open syscall, associate that pathname to this return, i.e. the fd. We were not doing this for the 'openat' syscall, which would cause 'perf trace' to fallback to using /proc to get the fd, change it so that we use what we got from probe:vfs_getname, reducing the 'openat' beautification process cost, ditching the syscalls performed to read procfs state and avoiding some possible races in the process. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-xnp44ao3bkb6ejeczxfnjwsh@git.kernel.orgSigned-off-by: -
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.19-20180801' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf trace: (Arnaldo Carvalho de Melo) - Do not require --no-syscalls to suppress strace like output, i.e. # perf trace -e sched:*switch will show just sched:sched_switch events, not strace-like formatted syscall events, use --syscalls to get the previous behaviour. If instead: # perf trace is used, i.e. no events specified, then --syscalls is implied and system wide strace like formatting will be applied to all syscalls. The behaviour when just a syscall subset is used with '-e' is unchanged: # perf trace -e *sleep,sched:*switch will work as before: just the 'nanosleep' syscall will be strace-like formatted plus the sched:sched_switch tracepoint event, system wide. - Allow string table generators to use a default header dir, allowing use of them without parameters to see the table it generates on stdout, e.g.: $ tools/perf/trace/beauty/kvm_ioctl.sh static const char *kvm_ioctl_cmds[] = { [0x00] = "GET_API_VERSION", [0x01] = "CREATE_VM", [0x02] = "GET_MSR_INDEX_LIST", [0x03] = "CHECK_EXTENSION", <BIG SNIP> [0xe0] = "CREATE_DEVICE", [0xe1] = "SET_DEVICE_ATTR", [0xe2] = "GET_DEVICE_ATTR", [0xe3] = "HAS_DEVICE_ATTR", }; $ See 'ls tools/perf/trace/beauty/*.sh' to see the available string table generators. - Add a generator for IPPROTO_ socket's protocol constants. perf record: (Kan Liang) - Fix error out while applying initial delay and using LBR, due to the use of a PERF_TYPE_SOFTWARE/PERF_COUNT_SW_DUMMY event to track PERF_RECORD_MMAP events while waiting for the initial delay. Such events fail when configured asking PERF_SAMPLE_BRANCH_STACK in perf_event_attr.sample_type. perf c2c: (Jiri Olsa) - Fix report crash for empty browser, when processing a perf.data file without events of interest, either because not asked for in 'perf record' or because the workload didn't triggered such events. perf list: (Michael Petlan) - Align metric group description format with PMU event description. perf tests: (Sandipan Das) - Fix indexing when invoking subtests, which caused BPF tests to get results for the next test in the list, with the last one reporting a failure. eBPF: - Fix installation directory for header files included from eBPF proggies, avoiding clashing with relative paths used to build other software projects such as glibc. (Thomas Richter) - Show better message when failing to load an object. (Arnaldo Carvalho de Melo) General: (Christophe Leroy) - Allow overriding MAX_NR_CPUS at compile time, to make the tooling usable in systems with less memory, in time this has to be changed to properly allocate based on _NPROCESSORS_ONLN. Architecture specific: - Update arm64's ThunderX2 implementation defined pmu core events (Ganapatrao Kulkarni) - Fix complex event name parsing in 'perf test' for PowerPC, where the 'umask' event modifier isn't present. (Sandipan Das) CoreSight ARM hardware tracing: (Leo Yan) - Fix start tracing packet handling. - Support dummy address value for CS_ETM_TRACE_ON packet. - Generate branch sample when receiving a CS_ETM_TRACE_ON packet. - Generate branch sample for CS_ETM_TRACE_ON packet. Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Signed-off-by:
-
- 01 Aug, 2018 3 commits
-
-
Arnaldo Carvalho de Melo authored
So far the --syscalls option was the default, requiring explicit --no-syscalls when wanting to process just some other event, invert that and assume it only when no other event was specified, allowing its explicit enablement when wanting to see all syscalls together with some other event: E.g: The existing default is maintained for a single workload: # perf trace sleep 1 <SNIP> 0.264 ( 0.003 ms): sleep/12762 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7f62cbf04000 0.271 ( 0.001 ms): sleep/12762 close(fd: 3) = 0 0.295 (1000.130 ms): sleep/12762 nanosleep(rqtp: 0x7ffd15194fd0) = 0 1000.469 ( 0.006 ms): sleep/12762 close(fd: 1) = 0 1000.480 ( 0.004 ms): sleep/12762 close(fd: 2) = 0 1000.502 ( ): sleep/12762 exit_group() # For a pid: # pidof ssh 7826 3961 3226 2628 2493 # perf trace -p 3961 ? ( ): ... [continued]: select()) = 1 0.023 ( 0.005 ms): clock_gettime(which_clock: BOOTTIME, tp: 0x7ffcc8fce870 ) = 0 0.036 ( 0.009 ms): read(fd: 5</dev/pts/7>, buf: 0x7ffcc8fca7b0, count: 16384 ) = 3 0.060 ( 0.004 ms): getpid( ) = 3961 (ssh) 0.079 ( 0.004 ms): clock_gettime(which_clock: BOOTTIME, tp: 0x7ffcc8fce8e0 ) = 0 0.088 ( 0.003 ms): clock_gettime(which_clock: BOOTTIME, tp: 0x7ffcc8fce7c0 ) = 0 <SNIP> For system wide, threads, cgroups, user, etc when no event is specified, the existing behaviour is maintained, i.e. --syscalls is selected. When some event is specified, then --no-syscalls doesn't need to be specified: # perf trace -e tcp:tcp_probe ssh localhost 0.000 tcp:tcp_probe:src=[::1]:22 dest=[::1]:39074 mark=0 length=53 snd_nxt=0xb67ce8f7 snd_una=0xb67ce8f7 snd_cwnd=10 ssthresh=2147483647 snd_wnd=43776 srtt=18 rcv_wnd=43690 0.010 tcp:tcp_probe:src=[::1]:39074 dest=[::1]:22 mark=0 length=32 snd_nxt=0xa8f9ef38 snd_una=0xa8f9ef23 snd_cwnd=10 ssthresh=2147483647 snd_wnd=43690 srtt=31 rcv_wnd=43776 4.525 tcp:tcp_probe:src=[::1]:22 dest=[::1]:39074 mark=0 length=1240 snd_nxt=0xb67ce90c snd_una=0xb67ce90c snd_cwnd=10 ssthresh=2147483647 snd_wnd=43776 srtt=18 rcv_wnd=43776 7.242 tcp:tcp_probe:src=[::1]:22 dest=[::1]:39074 mark=0 length=80 snd_nxt=0xb67ced44 snd_una=0xb67ce90c snd_cwnd=10 ssthresh=2147483647 snd_wnd=43776 srtt=18 rcv_wnd=174720 The authenticity of host 'localhost (::1)' can't be established. ECDSA key fingerprint is SHA256:TKZS58923458203490asekfjaklskljmkjfgPMBfHzY. ECDSA key fingerprint is MD5:d8:29:54:40:71:fa:b8:44:89:52:64:8a:35:42:d0:e8. Are you sure you want to continue connecting (yes/no)? ^C # To get the previous behaviour just use --syscalls and get all syscalls formatted strace like + the specified extra events: # trace -e sched:*switch --syscalls sleep 1 <SNIP> 0.160 ( 0.003 ms): sleep/12877 mprotect(start: 0x7fdfe2361000, len: 4096, prot: READ) = 0 0.164 ( 0.009 ms): sleep/12877 munmap(addr: 0x7fdfe2345000, len: 113155) = 0 0.211 ( 0.001 ms): sleep/12877 brk() = 0x55d3ce68e000 0.212 ( 0.002 ms): sleep/12877 brk(brk: 0x55d3ce6af000) = 0x55d3ce6af000 0.215 ( 0.001 ms): sleep/12877 brk() = 0x55d3ce6af000 0.219 ( 0.004 ms): sleep/12877 open(filename: 0xe1f07c00, flags: CLOEXEC) = 3 0.225 ( 0.001 ms): sleep/12877 fstat(fd: 3, statbuf: 0x7fdfe2138aa0) = 0 0.227 ( 0.003 ms): sleep/12877 mmap(len: 113045344, prot: READ, flags: PRIVATE, fd: 3) = 0x7fdfdb1b8000 0.234 ( 0.001 ms): sleep/12877 close(fd: 3) = 0 0.257 ( ): sleep/12877 nanosleep(rqtp: 0x7fffb36b6020) ... 0.260 ( ): sched:sched_switch:prev_comm=sleep prev_pid=12877 prev_prio=120 prev_state=D ==> next_comm=swapper/3 next_pid=0 next_prio=120 0.257 (1000.134 ms): sleep/12877 ... [continued]: nanosleep()) = 0 1000.428 ( 0.006 ms): sleep/12877 close(fd: 1) = 0 1000.440 ( 0.004 ms): sleep/12877 close(fd: 2) = 0 1000.461 ( ): sleep/12877 exit_group() # When specifiying just some syscalls, the behaviour doesn't change, i.e.: # trace -e nanosleep -e sched:*switch sleep 1 0.000 ( ): sleep/14974 nanosleep(rqtp: 0x7ffc344ba9c0 ) ... 0.007 ( ): sched:sched_switch:prev_comm=sleep prev_pid=14974 prev_prio=120 prev_state=D ==> next_comm=swapper/2 next_pid=0 next_prio=120 0.000 (1000.139 ms): sleep/14974 ... [continued]: nanosleep()) = 0 # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-om2fulll97ytnxv40ler8jkf@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
The next example scripts need the definition for the BPF functions, i.e. things like BPF_FUNC_probe_read, and in time will require lots of other definitions found in uapi/linux/bpf.h, so include it from the bpf.h file included from the eBPF scripts build with clang via '-e bpf_script.c' like in this example: $ tail -8 tools/perf/examples/bpf/5sec.c #include <bpf.h> int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec) { return sec == 5; } license(GPL); $ That 'bpf.h' include in the 5sec.c eBPF example will come from a set of header files crafted for building eBPF objects, that in a end-user system will come from: /usr/lib/perf/include/bpf/bpf.h And will include <uapi/linux/bpf.h> either from the place where the kernel was built, or from a kernel-devel rpm package like: -working-directory /lib/modules/4.17.9-100.fc27.x86_64/build That is set up by tools/perf/util/llvm-utils.c, and can be overriden by setting the 'kbuild-dir' variable in the "llvm" ~/.perfconfig file, like: # cat ~/.perfconfig [llvm] kbuild-dir = /home/foo/git/build/linux This usually doesn't need any change, just documenting here my findings while working with this code. In the future we may want to instead just use what is in /usr/include/linux/bpf.h, that comes from the UAPI provided from the kernel sources, for now, to avoid getting the kernel's non-UAPI "linux/bpf.h" file, that will cause clang to fail and is not what we want anyway (no BPF function definitions, etc), do it explicitely by asking for "uapi/linux/bpf.h". Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-zd8zeyhr2sappevojdem9xxt@git.kernel.orgSigned-off-by: -
Christophe Leroy authored
After update of kernel, the perf tool doesn't run anymore on my 32MB RAM powerpc board, but still runs on a 128MB RAM board: ~# strace perf execve("/usr/sbin/perf", ["perf"], [/* 12 vars */]) = -1 ENOMEM (Cannot allocate memory) --- SIGSEGV {si_signo=SIGSEGV, si_code=SI_KERNEL, si_addr=0} --- +++ killed by SIGSEGV +++ Segmentation fault objdump -x shows that .bss section has a huge size of 24Mbytes: 27 .bss 016baca8 101cebb8 101cebb8 001cd988 2**3 With especially the following objects having quite big size: 10205f80 l O .bss 00140000 runtime_cycles_stats 10345f80 l O .bss 00140000 runtime_stalled_cycles_front_stats 10485f80 l O .bss 00140000 runtime_stalled_cycles_back_stats 105c5f80 l O .bss 00140000 runtime_branches_stats 10705f80 l O .bss 00140000 runtime_cacherefs_stats 10845f80 l O .bss 00140000 runtime_l1_dcache_stats 10985f80 l O .bss 00140000 runtime_l1_icache_stats 10ac5f80 l O .bss 00140000 runtime_ll_cache_stats 10c05f80 l O .bss 00140000 runtime_itlb_cache_stats 10d45f80 l O .bss 00140000 runtime_dtlb_cache_stats 10e85f80 l O .bss 00140000 runtime_cycles_in_tx_stats 10fc5f80 l O .bss 00140000 runtime_transaction_stats 11105f80 l O .bss 00140000 runtime_elision_stats 11245f80 l O .bss 00140000 runtime_topdown_total_slots 11385f80 l O .bss 00140000 runtime_topdown_slots_retired 114c5f80 l O .bss 00140000 runtime_topdown_slots_issued 11605f80 l O .bss 00140000 runtime_topdown_fetch_bubbles 11745f80 l O .bss 00140000 runtime_topdown_recovery_bubbles This is due to commit 4d255766 ("perf: Bump max number of cpus to 1024"), because many tables are sized with MAX_NR_CPUS This patch gives the opportunity to redefine MAX_NR_CPUS via $ make EXTRA_CFLAGS=-DMAX_NR_CPUS=1 Signed-off-by:Christophe Leroy <christophe.leroy@c-s.fr> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20170922112043.8349468C57@po15668-vm-win7.idsi0.si.c-s.frSigned-off-by:
-
- 31 Jul, 2018 20 commits
-
-
Arnaldo Carvalho de Melo authored
Before: libbpf: license of tools/perf/examples/bpf/etcsnoop.c is GPL libbpf: section(6) version, size 4, link 0, flags 3, type=1 libbpf: kernel version of tools/perf/examples/bpf/etcsnoop.c is 41200 libbpf: section(7) .symtab, size 120, link 1, flags 0, type=2 bpf: config program 'syscalls:sys_enter_openat' libbpf: load bpf program failed: Operation not permitted libbpf: failed to load program 'syscalls:sys_enter_openat' libbpf: failed to load object 'tools/perf/examples/bpf/etcsnoop.c' bpf: load objects failed After: (just the last line changes) bpf: load objects failed: err=-4009: (Incorrect kernel version) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wi44iid0yjfht3lcvplc75fm@git.kernel.orgSigned-off-by:
-
Michael Petlan authored
PMU event descriptions use 7 spaces + '[' or 8 spaces as indentation. Metric groups used a tab + '['. This patch unifies it to the way PMU event descriptions are indented. BEFORE: $ perf list [...] Metric Groups: DSB: DSB_Coverage [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)] [...] AFTER: $ perf list [...] Metric Groups: DSB: DSB_Coverage [Fraction of Uops delivered by the DSB (aka Decoded Icache; or Uop Cache)] [...] Signed-off-by:Michael Petlan <mpetlan@redhat.com> Acked-by:
-
Ganapatrao Kulkarni authored
Signed-off-by:
Ganapatrao Kulkarni <ganapatrao.kulkarni@cavium.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ganapatrao Kulkarni <gklkml16@gmail.com> Cc: Jan Glauber <jan.glauber@cavium.com> Cc: Jayachandran C <jnair@caviumnetworks.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@cavium.com> Cc: Vadim Lomovtsev <vadim.lomovtsev@cavium.com> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20180731100251.23575-1-ganapatrao.kulkarni@cavium.comSigned-off-by:
-
Leo Yan authored
CS_ETM_TRACE_ON packet itself can give the info that there have a discontinuity in the trace, this patch is to add branch sample for CS_ETM_TRACE_ON packet if it is inserted in the middle of CS_ETM_RANGE packets; as result we can have hint for the trace discontinuity. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Walker <robert.walker@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1531295145-596-7-git-send-email-leo.yan@linaro.orgSigned-off-by:
-
Leo Yan authored
If one CS_ETM_TRACE_ON packet is inserted, we miss to generate branch sample for the previous CS_ETM_RANGE packet. This patch is to generate branch sample when receiving a CS_ETM_TRACE_ON packet, so this can save complete info for the previous CS_ETM_RANGE packet just before CS_ETM_TRACE_ON packet. Signed-off-by:
-
Leo Yan authored
For CS_ETM_TRACE_ON packet, its fields 'packet->start_addr' and 'packet->end_addr' equal to 0xdeadbeefdeadbeefUL which are emitted in the decoder layer as dummy value, but the dummy value is pointless for branch sample when we use 'perf script' command to check program flow. This patch is a preparation to support CS_ETM_TRACE_ON packet for branch sample, it converts the dummy address value to zero for more readable; this is accomplished by cs_etm__last_executed_instr() and cs_etm__first_executed_instr(). The later one is a new function introduced by this patch. Signed-off-by:
-
Leo Yan authored
Usually the start tracing packet is a CS_ETM_TRACE_ON packet, this packet is passed to cs_etm__flush(); cs_etm__flush() will check the condition 'prev_packet->sample_type == CS_ETM_RANGE' but 'prev_packet' is allocated by zalloc() so 'prev_packet->sample_type' is zero in initialization and this condition is false. So cs_etm__flush() will directly bail out without handling the start tracing packet. This patch is to introduce a new sample type CS_ETM_EMPTY, which is used to indicate the packet is an empty packet. cs_etm__flush() will swap packets when it finds the previous packet is empty, so this can record the start tracing packet into 'etmq->prev_packet'. Signed-off-by:
-
Thomas Richter authored
The perf tool build and install is controlled via a Makefile. The 'install' rule creates directories and copies files. Among them are header files installed in /usr/lib/include/perf/bpf/. However all listed examples are installing its header files in /usr/lib/<tool-name>/...[/include]/header.h and not in /usr/lib/include/<tool-name>/.../header.h. Background information: Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc -m31) as gcc is not able to find header-files like stdbool.h. In the glibc.spec file, you can see that glibc is configured with "--with-headers". In this case, first -nostdinc is added to the CFLAGS and then further include paths are added via -isystem. One of those paths should contain header files like stdbool.h. In order to get this path, gcc is invoked with: - on Fedora 28 (with 4.18 kernel): $ gcc -print-file-name=include /usr/lib/gcc/s390x-redhat-linux/8/include $ gcc -m31 -print-file-name=include /usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include => If perf is installed, this is: /usr/lib/include On my machine this directory is only containing the directory "perf". If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include - on Ubuntu 18.04 (with 4.15 kernel): $ gcc -print-file-name=include /usr/lib/gcc/s390x-linux-gnu/7/include $ gcc -m31 -print-file-name=include /usr/lib/gcc/s390x-linux-gnu/7/include => gcc returns the correct path even if perf is installed. In each case, the introduction of the subdirectory /usr/lib/include leads to the regression that one can not build the glibc RPM for s390 anymore as gcc can not find headers like stdbool.h. To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h Output before using the command 'perf test -Fv 40': echo '...[bpf-program-source]...' | /usr/bin/clang ... \ -I/root/lib/include/perf/bpf ... ^^^^^^^^^^^^ ... [root@p23lp27 perf]# perf test -F 40 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok [root@p23lp27 perf]# Output after using command 'perf test -Fv 40': echo '...[bpf-program-source]...' | /usr/bin/clang ... \ -I/root/lib/perf/include/bpf ... ^^^^^^^^^^^^ ... [root@p23lp27 perf]# perf test -F 40 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok [root@p23lp27 perf]# Committer testing: While the above 'perf test -F 40' (or 'perf test bpf') will allow us to see that the correct path is now added via -I, to actually test this we better try to use a bpf script that includes files in the changed directory. We have the files that now reside in /root/lib/perf/examples/bpf/ to do just that: # tail -8 /root/lib/perf/examples/bpf/5sec.c #include <bpf.h> int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec) { return sec == 5; } license(GPL); # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4 0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5 0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ... 0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5 0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6 0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987 0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ... 0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5 0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0 # Suggested-by:Stefan Liebler <stli@linux.ibm.com> Suggested-by:
Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by:
-
Jiri Olsa authored
'perf c2c' scans read/write accesses and tries to find false sharing cases, so when the events it wants were not asked for or ended up not taking place, we get no histograms. So do not try to display entry details if there's not any. Currently this ends up in crash: $ perf c2c report # then press 'd' perf: Segmentation fault $ Committer testing: Before: Record a perf.data file without events of interest to 'perf c2c report', then call it and press 'd': # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (6 samples) ] # perf c2c report perf: Segmentation fault -------- backtrace -------- perf[0x5b1d2a] /lib64/libc.so.6(+0x346df)[0x7fcb566e36df] perf[0x46fcae] perf[0x4a9f1e] perf[0x4aa220] perf(main+0x301)[0x42c561] /lib64/libc.so.6(__libc_start_main+0xe9)[0x7fcb566cff29] perf(_start+0x29)[0x42c999] # After the patch the segfault doesn't take place, a follow up patch to tell the user why nothing changes when 'd' is pressed would be good. Reported-by: rodia@autistici.org Signed-off-by:
-
Sandipan Das authored
Recently, the subtest numbering was changed to start from 1. While it is fine for displaying results, this should not be the case when the subtests are actually invoked. Typically, the subtests are stored in zero-indexed arrays and invoked based on the index passed to the main test function. Since the index now starts from 1, the second subtest in the array (index 1) gets invoked instead of the first (index 0). This applies to all of the following subtests but for the last one, the subtest always fails because it does not meet the boundary condition of the subtest index being lesser than the number of subtests. This can be observed on powerpc64 and x86_64 systems running Fedora 28 as shown below. Before: # perf test "builtin clang support" 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : FAILED! # perf test "LLVM search and compile" 38: LLVM search and compile : 38.1: Basic BPF llvm compile : Ok 38.2: kbuild searching : Ok 38.3: Compile source for BPF prologue generation : Ok 38.4: Compile source for BPF relocation : FAILED! # perf test "BPF filter" 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : FAILED! After: # perf test "builtin clang support" 55: builtin clang support : 55.1: builtin clang compile C source to IR : Ok 55.2: builtin clang compile C source to ELF object : Ok # perf test "LLVM search and compile" 38: LLVM search and compile : 38.1: Basic BPF llvm compile : Ok 38.2: kbuild searching : Ok 38.3: Compile source for BPF prologue generation : Ok 38.4: Compile source for BPF relocation : Ok # perf test "BPF filter" 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok Signed-off-by:
Sandipan Das <sandipan@linux.ibm.com> Reported-by:
-
Arnaldo Carvalho de Melo authored
For instance: $ trace -e socket* ssh sandy 0.000 ( 0.031 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3 0.052 ( 0.015 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3 1.568 ( 0.020 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3 1.603 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3 1.699 ( 0.014 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3 1.724 ( 0.012 ms): ssh/19919 socket(family: LOCAL, type: STREAM|CLOEXEC|NONBLOCK ) = 3 1.804 ( 0.020 ms): ssh/19919 socket(family: INET, type: STREAM, protocol: TCP ) = 3 17.549 ( 0.098 ms): ssh/19919 socket(family: LOCAL, type: STREAM ) = 4 acme@sandy's password: Just like with other syscall args, the common bits are supressed so that the output is more compact, i.e. we use "TCP" instead of "IPPROTO_TCP", but we can make this show the original constant names if we like it by using some command line knob or ~/.perfconfig "[trace]" section variable. Also needed is to make perf's event parser accept things like: $ perf trace -e socket*/protocol=TCP/ By using both the tracefs event 'format' files and these tables built from the kernel sources. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-l39jz1vnyda0b6jsufuc8bz7@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
It'll be wired to 'perf trace' in the next cset. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2i9vkvm1ik8yu4hgjmxhsyjv@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
We may have string tables where not all slots have values, in those cases its better to print the numeric value, for instance: In the table below we would show "protocol: (null)" for socket_ipproto[3] Where it would be better to show "protocol: 3". $ tools/perf/trace/beauty/socket_ipproto.sh static const char *socket_ipproto[] = { [0] = "IP", [103] = "PIM", [108] = "COMP", [12] = "PUP", [132] = "SCTP", [136] = "UDPLITE", [137] = "MPLS", [17] = "UDP", [1] = "ICMP", [22] = "IDP", [255] = "RAW", [29] = "TP", [2] = "IGMP", [33] = "DCCP", [41] = "IPV6", [46] = "RSVP", [47] = "GRE", [4] = "IPIP", [50] = "ESP", [51] = "AH", [6] = "TCP", [8] = "EGP", [92] = "MTP", [94] = "BEETPH", [98] = "ENCAP", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-7djfak94eb3b9ltr79cpn3ti@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
It'll use tools/include copy of linux/in.h to generate a table to be used by tools, initially by the 'socket' and 'socketpair' beautifiers in 'perf trace', but that could also be used to translate from a string constant to the integer value to be used in a eBPF or tracefs tracepoint filter. When used without any args it produces: $ tools/perf/trace/beauty/socket_ipproto.sh static const char *socket_ipproto[] = { [0] = "IP", [103] = "PIM", [108] = "COMP", [12] = "PUP", [132] = "SCTP", [136] = "UDPLITE", [137] = "MPLS", [17] = "UDP", [1] = "ICMP", [22] = "IDP", [255] = "RAW", [29] = "TP", [2] = "IGMP", [33] = "DCCP", [41] = "IPV6", [46] = "RSVP", [47] = "GRE", [4] = "IPIP", [50] = "ESP", [51] = "AH", [6] = "TCP", [8] = "EGP", [92] = "MTP", [94] = "BEETPH", [98] = "ENCAP", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-v9rafqh3qn6b9kp9vfvj9f8s@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
We'll use it to create tables for the 'protocol' argument to the socket syscall when the 'family' arg is one of AF_INET or AF_INET6. Add it to check_headers.sh so that when a new protocol gets added we get a notification during the build process. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2amnveu1ns4emjn70xuavpje@git.kernel.orgSigned-off-by:
-
Sandipan Das authored
The 'umask' event parameter is unsupported on some architectures like powerpc64. This can be observed on a powerpc64le system running Fedora 27 as shown below. # perf test "Parse event definition strings" -v 6: Parse event definition strings : --- start --- test child forked, pid 45915 ... running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp'Invalid event/parameter 'umask' Invalid event/parameter 'umask' failed to parse event 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2,umask=0x3/ukp', err 1, str 'unknown term' event syntax error: '..,event=0x2,umask=0x3/ukp' \___ unknown term valid terms: event,mark,pmc,cache_sel,pmcxsel,unit,thresh_stop,thresh_start,combine,thresh_sel,thresh_cmp,sample_mode,config,config1,config2,name,period,freq,branch_type,time,call-graph,stack-size,no-inherit,inherit,max-stack,no-overwrite,overwrite,driver-config mem_access -> cpu/event=0x10401e0/ running test 0 'config=10,config1,config2=3,umask=1' test child finished with 1 ---- end ---- Parse event definition strings: FAILED! Committer testing: After applying the patch these test passes and in verbose mode we get: # perf test -v "event definition" 6: Parse event definition strings: --- start --- test child forked, pid 11061 running test 0 'syscalls:sys_enter_openat'Using CPUID GenuineIntel-6-9E <SNIP> running test 53 'cycles/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks'/Duk' running test 0 'cpu/config=10,config1,config2=3,period=1000/u' running test 1 'cpu/config=1,name=krava/u,cpu/config=2/u' running test 2 'cpu/config=1,call-graph=fp,time,period=100000/,cpu/config=2,call-graph=no,time=0,period=2000/' running test 3 'cpu/name='COMPLEX_CYCLES_NAME:orig=cycles,desc=chip-clock-ticks',period=0x1,event=0x2/ukp' <SNIP> test child finished with 0 ---- end ---- Parse event definition strings: Ok # Suggested-by:Ravi Bangoria <ravi.bangoria@linux.ibm.com> Signed-off-by:
-
Kan Liang authored
'perf record' will error out if both --delay and LBR are applied. For example: # perf record -D 1000 -a -e cycles -j any -- sleep 2 Error: dummy:HG: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' # A dummy event is added implicitly for initial delay, which has the same configurations as real sampling events. The dummy event is a software event. If LBR is configured, perf must error out. The dummy event will only be used to track PERF_RECORD_MMAP while perf waits for the initial delay to enable the real events. The BRANCH_STACK bit can be safely cleared for the dummy event. After applying the patch: # perf record -D 1000 -a -e cycles -j any -- sleep 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.054 MB perf.data (828 samples) ] # Reported-by:
Sunil K Pandey <sunil.k.pandey@intel.com> Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
Useful when checking the effects of header synchs for the files it uses as a input to generate string tables, in retrospect this is how it should've been done from day 1, not requiring the header_dir to be set on the Makefile, will change everything later, so that the only parm, common to all generators will be $(srctree) and $(beauty_outdir). So, to see what it generates, just call it without any parameters: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh static const char *vhost_virtio_ioctl_cmds[] = { [0x00] = "SET_FEATURES", [0x01] = "SET_OWNER", [0x02] = "RESET_OWNER", [0x03] = "SET_MEM_TABLE", [0x04] = "SET_LOG_BASE", [0x07] = "SET_LOG_FD", [0x10] = "SET_VRING_NUM", [0x11] = "SET_VRING_ADDR", [0x12] = "SET_VRING_BASE", [0x13] = "SET_VRING_ENDIAN", [0x14] = "GET_VRING_ENDIAN", [0x20] = "SET_VRING_KICK", [0x21] = "SET_VRING_CALL", [0x22] = "SET_VRING_ERR", [0x23] = "SET_VRING_BUSYLOOP_TIMEOUT", [0x24] = "GET_VRING_BUSYLOOP_TIMEOUT", [0x30] = "NET_SET_BACKEND", [0x40] = "SCSI_SET_ENDPOINT", [0x41] = "SCSI_CLEAR_ENDPOINT", [0x42] = "SCSI_GET_ABI_VERSION", [0x43] = "SCSI_SET_EVENTS_MISSED", [0x44] = "SCSI_GET_EVENTS_MISSED", [0x60] = "VSOCK_SET_GUEST_CID", [0x61] = "VSOCK_SET_RUNNING", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", [0x12] = "GET_VRING_BASE", }; $ Or: $ tools/perf/trace/beauty/sndrv_pcm_ioctl.sh static const char *sndrv_pcm_ioctl_cmds[] = { [0x00] = "PVERSION", [0x01] = "INFO", [0x02] = "TSTAMP", [0x03] = "TTSTAMP", [0x04] = "USER_PVERSION", [0x10] = "HW_REFINE", [0x11] = "HW_PARAMS", [0x12] = "HW_FREE", [0x13] = "SW_PARAMS", [0x20] = "STATUS", [0x21] = "DELAY", [0x22] = "HWSYNC", [0x23] = "SYNC_PTR", [0x24] = "STATUS_EXT", [0x32] = "CHANNEL_INFO", [0x40] = "PREPARE", [0x41] = "RESET", [0x42] = "START", [0x43] = "DROP", [0x44] = "DRAIN", [0x45] = "PAUSE", [0x46] = "REWIND", [0x47] = "RESUME", [0x48] = "XRUN", [0x49] = "FORWARD", [0x50] = "WRITEI_FRAMES", [0x51] = "READI_FRAMES", [0x52] = "WRITEN_FRAMES", [0x53] = "READN_FRAMES", [0x60] = "LINK", [0x61] = "UNLINK", }; $ Etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-90am4vm8hh1osms894dp2otr@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
To pick up fixes. Signed-off-by: -
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo-4.18-20180730' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Update the tools copy of several files, including perf_event.h, powerpc's asm/unistd.h (new io_pgetevents syscall), bpf.h and x86's memcpy_64.s (used in 'perf bench mem'), silencing the respective warnings during the perf tools build. - Fix the build on the alpine:edge distro. Signed-off-by:
-
