- 05 Mar, 2019 2 commits
-
-
David Francis authored
Native 420 and 422 transfer modes are new in DSC1.2 In these modes, each two pixels of a slice are treated as one pixel, so the slice width is half as large (round down) for the purposes of calucating the groups per line and chunk size in bytes In native 422 mode, each pixel has four components, so the mux component of a group is larger by one additional mux word and one additional component Now that there is native 422 support, the configuration option previously called enable422 is renamed to simple_422 to avoid confusion Acked-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
David Francis <David.Francis@amd.com> Signed-off-by:
-
David Francis authored
The function intel_compute_rc_parameters is part of the dsc spec and is not driver-specific. Other drm drivers might like to use it. The function is not changed; just moved and renamed. Reviewed-by:
-
- 04 Mar, 2019 8 commits
-
-
Colin Ian King authored
There is a spelling mistake in a DRM_NOTE message. Fix this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190217225554.17742-1-colin.king@canonical.com
-
Noralf Trønnes authored
This protects device resources from use after device removal. There are 3 ways for driver-device unbinding to happen: - The driver module is unloaded causing the driver to be unregistered. This can't happen as long as there are open file handles because a reference is taken on the module. - The device is removed (Device Tree overlay unloading). This can happen at any time. - The driver sysfs unbind file can be used to unbind the driver from the device. This can happen any time. v2: Since drm_atomic_helper_shutdown() has to be called after drm_dev_unplug() we don't want do block ->disable after unplug. Signed-off-by:Noralf Trønnes <noralf@tronnes.org> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-8-noralf@tronnes.org
-
Noralf Trønnes authored
No more users left so it can go alongside its helpers. Update the tinydrm docs description and remove todo entry. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
-
Noralf Trønnes authored
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add driver release callbacks. Signed-off-by:
-
Noralf Trønnes authored
Use devm_drm_dev_init() and drop using tinydrm_device. v2: devm_drm_dev_register() was dropped so add a driver release callback. Signed-off-by:
-
Noralf Trønnes authored
Add driver example that shows how devm_drm_dev_init() can be used. v2: Expand docs (Sam, Daniel) Signed-off-by:
-
Noralf Trønnes authored
This adds a resource managed (devres) version of drm_dev_init(). v2: Remove devm_drm_dev_register() since we can't touch hw in devm release functions and drivers want to disable hw on driver module unload (Daniel Vetter, Greg KH) Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: -
Noralf Trønnes authored
This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by:
-
- 01 Mar, 2019 3 commits
-
-
Jernej Skrabec authored
VI planes support coarse scaling which helps to overcome VI scaler limitations. While exact working of coarse scaling isn't known, it seems that it just skips programmed amount of rows and columns. This is especially useful for downscaling very big planes (4K down to 1080p). Horizontal coarse scaling is currently used to fit one line to VI scaler buffer. Vertical coarse scaling is used to assure that VI scaler is actually capable of processing framebuffer in one frame time. Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190228200329.11128-4-jernej.skrabec@siol.net
-
Jernej Skrabec authored
While all RGB scalers have maximum line size of 2048, some YUV scalers have maximum line size of 2048 and some have line size of 4096. Since there is no rule for that, add a quirk. Signed-off-by:
-
David Santamaría Rogado authored
Lenovo Ideapad D330 Pentium CPU version has 1920x1200 LCD. Console output gets rotated at boot as Miix 310. Signed-off-by:
David Santamaría Rogado <howl.nsp@gmail.com> Signed-off-by:
-
- 28 Feb, 2019 5 commits
-
-
Maarten Lankhorst authored
The function is about cleaning up CRTC resources, not plane resources, fix this in docbook. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by:
-
Daniel Vetter authored
This is the default for atomic drivers. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190221155857.19773-2-daniel.vetter@ffwll.ch Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by:
-
Gerd Hoffmann authored
Just run drm_prime_pages_to_sg() on the ttm pages list to get an sg_table for export. The pages list is created at object initialization time, so there should be no need to handle an unpopulated page list. Add a sanity check nevertheless. Signed-off-by:
-
Gerd Hoffmann authored
virtio-gpu objects never move around, so effectively they are pinned all the time. Therefore we don't need the (optional) pin/unpin callbacks. Remove them. Signed-off-by:
-
Gerd Hoffmann authored
Sync gem vm_node.start with ttm vm_node.start, then we can just call drm_gem_prime_mmap(). Signed-off-by:
-
- 27 Feb, 2019 3 commits
-
-
Lucas Stach authored
The documentation was misleading, as for a lot of use-cases holding the RCU read side lock is sufficient. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180111165302.25556-2-l.stach@pengutronix.de
-
Lucas Stach authored
This adds lockdep asserts to the reservation functions which state in their documentation that obj->lock must be held. Allows builds with PROVE_LOCKING enabled to check that the locking requirements are met. Signed-off-by:
-
Chris Wilson authored
After an event is sent, we try to copy it into the user buffer of the first waiter in drm_read() and if the user buffer doesn't have enough room we put it back onto the list. However, we didn't wake up any subsequent waiter, so that event may sit on the list until either a new vblank event is sent or a new waiter appears. Rare, but in the worst case may lead to a stuck process. Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk
-
- 26 Feb, 2019 3 commits
-
-
Konstantin Sudakov authored
The Ronbo RB070D30 panel is a MIPI-DSI panel based on a Fitipower EK79007 controller and a 1024x600 panel. Reviewed-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by:
Konstantin Sudakov <k.sudakov@integrasources.com> Signed-off-by:
-
Maxime Ripard authored
The Ronbo RB070D30 panel is a 1024x600 MIPI-DSI panel. Reviewed-by:
-
Konstantin Sudakov authored
Ronbo Electronics manufactures display panels. Reviewed-by:
-
- 21 Feb, 2019 9 commits
-
-
YueHaibing authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/qxl/qxl_display.c: In function 'qxl_primary_atomic_update': drivers/gpu/drm/qxl/qxl_display.c:538:17: warning: variable 'bo_old' set but not used [-Wunused-but-set-variable] It's not used any more after 4979904c ("drm/qxl: use shadow bo directly") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: http://patchwork.freedesktop.org/patch/msgid/20190218085459.196470-1-yuehaibing@huawei.comSigned-off-by:
-
Noralf Trønnes authored
It's now safe to let fbcon unbind automatically on fbdev unregister. The crash problem was fixed in commit 2122b405 ("fbdev: fbcon: Fix unregister crash when more than one framebuffer") Signed-off-by:
-
Andy Shevchenko authored
Fix adddress -> address typo. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Noralf Trønnes authored
Add a function to derive mipi_dbi from drm_device now that tinydrm_device is going away. Signed-off-by:
-
Noralf Trønnes authored
It's just a wrapper around drm_atomic_helper_shutdown() now. Also store drm_device in the drvdata field, since that's what's used. Signed-off-by:
-
Noralf Trønnes authored
Rework function signature so tinydrm_device can be avoided. Move definition to tinydrm-helpers.h so tinydrm.h can be deleted in a later patch. Signed-off-by:
-
Noralf Trønnes authored
This adds a helper macro to specify modes that only contain info about resolution. v2: Actually set the width and height (Ilia Mirkin) Cc: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Noralf Trønnes authored
This makes it possible to use drm_dev_unplug() with the upcoming devm_drm_dev_init() which will do drm_dev_put() in its release callback. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: David (ChunMing) Zhou <David1.Zhou@amd.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Sean Paul <sean@poorly.run> Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by:
-
Noralf Trønnes authored
If userspace has open fd(s) when drm_dev_unplug() is run, it will result in drm_dev_unregister() being called twice. First in drm_dev_unplug() and then later in drm_release() through the call to drm_put_dev(). Since userspace already holds a ref on drm_device through the drm_minor, it's not necessary to add extra ref counting based on no open file handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug(). We now have this: - Userpace holds a ref on drm_device as long as there's open fd(s) - The driver holds a ref on drm_device as long as it's bound to the struct device When both sides are done with drm_device, it is released. Signed-off-by:
Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org
-
- 20 Feb, 2019 2 commits
-
-
Christian König authored
This got messed up by "drm: change func to better detect wether swiotlb is needed". Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Michael D Labriola <michael.d.labriola@gmail.com> Link: https://patchwork.freedesktop.org/patch/287070/
-
Michael D Labriola authored
This commit fixes DRM failures on Xen PV systems that were introduced in v4.17 by the following commits: 82626363 drm: add func to get max iomem address v2 fd5fd480 drm/amdgpu: only enable swiotlb alloc when need v2 1bc3d3cc drm/radeon: only enable swiotlb path when need v2 The introduction of ->need_swiotlb to the ttm_dma_populate() conditionals in the radeon and amdgpu device drivers causes Gnome to immediately crash on Xen PV systems, returning the user to the login screen. The following kernel errors get logged: [ 28.554259] radeon_dp_aux_transfer_native: 200 callbacks suppressed [ 31.219821] radeon 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes) [ 31.220030] [drm:radeon_gem_object_create [radeon]] *ERROR* Failed to allocate GEM object (16384000, 2, 4096, -14) [ 31.226109] radeon 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes) [ 31.226300] [drm:radeon_gem_object_create [radeon]] *ERROR* Failed to allocate GEM object (16384000, 2, 4096, -14) [ 31.300734] gnome-shell[1935]: segfault at 88 ip 00007f39151cd904 sp 00007ffc97611ad8 error 4 in libmutter-cogl.so[7f3915178000+aa000] [ 31.300745] Code: 5f c3 0f 1f 40 00 48 8b 47 78 48 8b 40 40 ff e0 66 0f 1f 44 00 00 48 8b 47 78 48 8b 40 48 ff e0 66 0f 1f 44 00 00 48 8b 47 78 <48> 8b 80 88 00 00 00 ff e0 0f 1f 00 48 8b 47 78 48 8b 40 68 ff e0 [ 38.193302] radeon_dp_aux_transfer_native: 116 callbacks suppressed [ 40.009317] radeon 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes) [ 40.009488] [drm:radeon_gem_object_create [radeon]] *ERROR* Failed to allocate GEM object (16384000, 2, 4096, -14) [ 40.015114] radeon 0000:01:00.0: swiotlb buffer is full (sz: 2097152 bytes) [ 40.015297] [drm:radeon_gem_object_create [radeon]] *ERROR* Failed to allocate GEM object (16384000, 2, 4096, -14) [ 40.028302] gnome-shell[2431]: segfault at 2dadf40 ip 0000000002dadf40 sp 00007ffcd24ea5f8 error 15 [ 40.028306] Code: 20 6e 31 00 00 00 00 00 00 00 00 37 e3 3d 2d 7f 00 00 80 f4 e6 3d 2d 7f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 <00> 00 00 00 00 00 00 00 c1 00 00 00 00 00 00 00 80 e1 d2 03 00 00 This commit renames drm_get_max_iomem() to drm_need_swiotlb(), adds a xen_pv_domain() check to it, and moves the bit shifting comparison that always follows its usage into the function (simplifying the drm driver code). Signed-off-by:
-
- 19 Feb, 2019 5 commits
-
-
Uma Shankar authored
This patch attaches the colorspace connector property to the hdmi connector. Based on colorspace change, modeset will be triggered to switch to new colorspace. Based on colorspace property value create an infoframe with appropriate colorspace. This can be used to send an infoframe packet with proper colorspace value set which will help to enable wider color gamut like BT2020 on sink. This patch attaches and enables HDMI colorspace, DP will be taken care separately. v2: Merged the changes of creating infoframe as well to this patch as per Maarten's suggestion. v3: Addressed review comments from Shashank. Separated HDMI and DP colorspaces as suggested by Ville and Maarten. v4: Addressed Chris and Ville's review comments, and created a common colorspace property for DP and HDMI, filtered the list based on the colorspaces supported by the respective protocol standard. Handle the default case properly. v5: Merged the DP handling along with platform colorspace handling as per Shashank's comments. v6: Reverted to old design of exposing all colorspaces to userspace as per Ville's review comment v7: Fixed a checkpatch complaint, Addressed Maarten' review comment, updated the RB from Maarten and Jani's ack. v8: Moved colorspace AVI Infoframe programming to drm core and removed from driver as per Ville's suggestion. v9: Added a check to only allow RGB colorpsaces to be set in infoframe though the colorspace property. Since there is no output csc property to control planar formats and it will be added later. Changes for RGB->YUV conversion inside driver without userspace knowledge is still supported. This is as per Ville's suggestion. v10: Fixed an error in if check. v11: Dropped the check for planar vs RGB and allow all the colorspaces. Onus will be on userspace to pick whatever pipe output it is able to drive. v12: Added Ville's RB. Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Acked-by:
-
Uma Shankar authored
This adds colorspace information to HDMI AVI infoframe. A helper function is added to program the same. v2: Moved this to drm core instead of i915 driver. v3: Exported the helper function. v4: Added separate HDMI specific macro as per CTA spec. This is separate from user exposed enum values. This is as per Ville's suggestion. v5: Appended BT709 and SMPTE 170M with YCC information as per Ville's review comment to be clear and not to be confused with RGB. v6: Added bit wise macro for various fields of colorimetry for easier understanding and review as per Ville's comments. Moved the same out of header file to avoid any namespace issues. v7: Undef some macros to avoid any namespace collision as suggested by Ville. Added Ville's RB. Signed-off-by:
-
Uma Shankar authored
Create a new connector property to program colorspace to sink devices. Modern sink devices support more than 1 type of colorspace like 601, 709, BT2020 etc. This helps to switch based on content type which is to be displayed. The decision lies with compositors as to in which scenarios, a particular colorspace will be picked. This will be helpful mostly to switch to higher gamut colorspaces like BT2020 when the media content is encoded as BT2020. Thereby giving a good visual experience to users. The expectation from userspace is that it should parse the EDID and get supported colorspaces. Use this property and switch to the one supported. Sink supported colorspaces should be retrieved by userspace from EDID and driver will not explicitly expose them. Basically the expectation from userspace is: - Set up CRTC DEGAMMA/CTM/GAMMA to convert to some sink colorspace - Set this new property to let the sink know what it converted the CRTC output to. v2: Addressed Maarten and Ville's review comments. Enhanced the colorspace enum to incorporate both HDMI and DP supported colorspaces. Also, added a default option for colorspace. v3: Removed Adobe references from enum definitions as per Ville, Hans Verkuil and Jonas Karlman suggestions. Changed Default to an unset state where driver will assign the colorspace is not chosen by user, suggested by Ville and Maarten. Addressed other misc review comments from Maarten. Split the changes to have separate colorspace property for DP and HDMI. v4: Addressed Chris and Ville's review comments, and created a common colorspace property for DP and HDMI, filtered the list based on the colorspaces supported by the respective protocol standard. v5: Made the property creation helper accept enum list based on platform capabilties as suggested by Shashank. Consolidated HDMI and DP property creation in the common helper. v6: Addressed Shashank's review comments. v7: Added defines instead of enum in uapi as per Brian Starkey's suggestion in order to go with string matching at userspace. Updated the commit message to add more details as well kernel docs. v8: Addressed Maarten's review comments. v9: Removed macro defines from uapi as per Brian Starkey and Daniel Stone's comments and moved to drm include file. Moved back to older design with exposing all HDMI colorspaces to userspace since infoframe capability is there even on legacy platforms, as per Ville's review comments. v10: Fixed sparse warnings, updated the RB from Maarten and Jani's ack. v11: Addressed Ville's review comments. Updated the Macro naming and added DCI-P3 colorspace as well, defined in CTA 861.G spec. v12: Appended BT709 and SMPTE 170M with YCC information as per Ville's review comment to be clear and not to be confused with RGB. v13: Reorder the colorspace macros. v14: Removed DP as of now, will be added later once full support is enabled, as per Ville's suggestion. Added Ville's RB. Signed-off-by:
Shashank Sharma <shashank.sharma@intel.com> Reviewed-by:
-
Daniel Vetter authored
Now that component has docs it's worth spending a few words and hyperlinks on recommended best practices in drm. v2: Add another item that component shouldn't be preferred over drm_bridge/panel and similar subsystems already providing specialized support for specific components (Laurent). Also convert to bullet list. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk> Reviewed-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 3 was used: -Wimplicit-fallthrough=3 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
