This adds two command line keys:

 -c|--cgroup path|@inode	Walk only pages owned by this memory cgroup
 -C|--list-cgroup		Show memory cgroup inodes

[vdavydov@virtuozzo.com: opt_cgroup should be uint64_t.  Fix conflicts with "tools/vm/page-types.c: support swap entry"]
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Similarly to direct reclaim/compaction, kswapd attempts to combine
reclaim and compaction to attempt making memory allocation of given
order available.

The details differ from direct reclaim e.g. in having high watermark as
a goal.  The code involved in kswapd's reclaim/compaction decisions has
evolved to be quite complex.

Testing reveals that it doesn't actually work in at least one scenario,
and closer inspection suggests that it could be greatly simplified
without compromising on the goal (make high-order page available) or
efficiency (don't reclaim too much).  The simplification relieas of
doing all compaction in kcompactd, which is simply woken up when high
watermarks are reached by kswapd's reclaim.

The scenario where kswapd compaction doesn't work was found with mmtests
test stress-highalloc configured to attempt order-9 allocations without
direct reclaim, just waking up kswapd.  There was no compaction attempt
from kswapd during the whole test.  Some added instrumentation shows
what happens:

 - balance_pgdat() sets end_zone to Normal, as it's not balanced
 - reclaim is attempted on DMA zone, which sets nr_attempted to 99, but
   it cannot reclaim anything, so sc.nr_reclaimed is 0
 - for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so
   it merely checks if high watermarks were reached for base pages.
   This is true, so no reclaim is attempted.  For DMA, testorder=0
   wasn't used, as compaction_suitable() returned COMPACT_SKIPPED
 - even though the pgdat_needs_compaction flag wasn't set to false, no
   compaction happens due to the condition sc.nr_reclaimed >
   nr_attempted being false (as 0 < 99)
 - priority-- due to nr_reclaimed being 0, repeat until priority reaches
   0 pgdat_balanced() is false as only the small zone DMA appears
   balanced (curiously in that check, watermark appears OK and
   compaction_suitable() returns COMPACT_PARTIAL, because a lower
   classzone_idx is used there)

Now, even if it was decided that reclaim shouldn't be attempted on the
DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 >
nr_attempted=0) is also false.  The condition really should use >= as
the comment suggests.  Then there is a mismatch in the check for setting
pgdat_needs_compaction to false using low watermark, while the rest uses
high watermark, and who knows what other subtlety.  Hopefully this
demonstrates that this is unsustainable.

Luckily we can simplify this a lot.  The reclaim/compaction decisions
make sense for direct reclaim scenario, but in kswapd, our primary goal
is to reach high watermark in order-0 pages.  Afterwards we can attempt
compaction just once.  Unlike direct reclaim, we don't reclaim extra
pages (over the high watermark), the current code already disallows it
for good reasons.

After this patch, we simply wake up kcompactd to process the pgdat,
after we have either succeeded or failed to reach the high watermarks in
kswapd, which goes to sleep.  We pass kswapd's order and classzone_idx,
so kcompactd can apply the same criteria to determine which zones are
worth compacting.  Note that we use the classzone_idx from
wakeup_kswapd(), not balanced_classzone_idx which can include higher
zones that kswapd tried to balance too, but didn't consider them in
pgdat_balanced().

Since kswapd now cannot create high-order pages itself, we need to
adjust how it determines the zones to be balanced.  The key element here
is adding a "highorder" parameter to zone_balanced, which, when set to
false, makes it consider only order-0 watermark instead of the desired
higher order (this was done previously by kswapd_shrink_zone(), but not
elsewhere).  This false is passed for example in pgdat_balanced().
Importantly, wakeup_kswapd() uses true to make sure kswapd and thus
kcompactd are woken up for a high-order allocation failure.

The last thing is to decide what to do with pageblock_skip bitmap
handling.  Compaction maintains a pageblock_skip bitmap to record
pageblocks where isolation recently failed.  This bitmap can be reset by
three ways:

1) direct compaction is restarting after going through the full deferred cycle

2) kswapd goes to sleep, and some other direct compaction has previously
   finished scanning the whole zone and set zone->compact_blockskip_flush.
   Note that a successful direct compaction clears this flag.

3) compaction was invoked manually via trigger in /proc

The case 2) is somewhat fuzzy to begin with, but after introducing
kcompactd we should update it.  The check for direct compaction in 1),
and to set the flush flag in 2) use current_is_kswapd(), which doesn't
work for kcompactd.  Thus, this patch adds bool direct_compaction to
compact_control to use in 2).  For the case 1) we remove the check
completely - unlike the former kswapd compaction, kcompactd does use the
deferred compaction functionality, so flushing tied to restarting from
deferred compaction makes sense here.

Note that when kswapd goes to sleep, kcompactd is woken up, so it will
see the flushed pageblock_skip bits.  This is different from when the
former kswapd compaction observed the bits and I believe it makes more
sense.  Kcompactd can afford to be more thorough than a direct
compaction trying to limit allocation latency, or kswapd whose primary
goal is to reclaim.

For testing, I used stress-highalloc configured to do order-9
allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just
on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in
phases 1 and 2 work as usual):

stress-highalloc
                        4.5-rc1+before          4.5-rc1+after
                             -nodirect              -nodirect
Success 1 Min          1.00 (  0.00%)         5.00 (-66.67%)
Success 1 Mean         1.40 (  0.00%)         6.20 (-55.00%)
Success 1 Max          2.00 (  0.00%)         7.00 (-16.67%)
Success 2 Min          1.00 (  0.00%)         5.00 (-66.67%)
Success 2 Mean         1.80 (  0.00%)         6.40 (-52.38%)
Success 2 Max          3.00 (  0.00%)         7.00 (-16.67%)
Success 3 Min         34.00 (  0.00%)        62.00 (  1.59%)
Success 3 Mean        41.80 (  0.00%)        63.80 (  1.24%)
Success 3 Max         53.00 (  0.00%)        65.00 (  2.99%)

User                          3166.67        3181.09
System                        1153.37        1158.25
Elapsed                       1768.53        1799.37

                            4.5-rc1+before   4.5-rc1+after
                                 -nodirect    -nodirect
Direct pages scanned                32938        32797
Kswapd pages scanned              2183166      2202613
Kswapd pages reclaimed            2152359      2143524
Direct pages reclaimed              32735        32545
Percentage direct scans                1%           1%
THP fault alloc                       579          612
THP collapse alloc                    304          316
THP splits                              0            0
THP fault fallback                    793          778
THP collapse fail                      11           16
Compaction stalls                    1013         1007
Compaction success                     92           67
Compaction failures                   920          939
Page migrate success               238457       721374
Page migrate failure                23021        23469
Compaction pages isolated          504695      1479924
Compaction migrate scanned         661390      8812554
Compaction free scanned          13476658     84327916
Compaction cost                       262          838

After this patch we see improvements in allocation success rate
(especially for phase 3) along with increased compaction activity.  The
compaction stalls (direct compaction) in the interfering kernel builds
(probably THP's) also decreased somewhat thanks to kcompactd activity,
yet THP alloc successes improved a bit.

Note that elapsed and user time isn't so useful for this benchmark,
because of the background interference being unpredictable.  It's just
to quickly spot some major unexpected differences.  System time is
somewhat more useful and that didn't increase.

Also (after adjusting mmtests' ftrace monitor):

Time kswapd awake               2547781     2269241
Time kcompactd awake                  0      119253
Time direct compacting           939937      557649
Time kswapd compacting                0           0
Time kcompactd compacting             0      119099

The decrease of overal time spent compacting appears to not match the
increased compaction stats.  I suspect the tasks get rescheduled and
since the ftrace monitor doesn't see that, the reported time is wall
time, not CPU time.  But arguably direct compactors care about overall
latency anyway, whether busy compacting or waiting for CPU doesn't
matter.  And that latency seems to almost halved.

It's also interesting how much time kswapd spent awake just going
through all the priorities and failing to even try compacting, over and
over.

We can also configure stress-highalloc to perform both direct
reclaim/compaction and wakeup kswapd/kcompactd, by using
GFP_KERNEL|__GFP_HIGH|__GFP_COMP:

stress-highalloc
                        4.5-rc1+before         4.5-rc1+after
                               -direct               -direct
Success 1 Min          4.00 (  0.00%)        9.00 (-50.00%)
Success 1 Mean         8.00 (  0.00%)       10.00 (-19.05%)
Success 1 Max         12.00 (  0.00%)       11.00 ( 15.38%)
Success 2 Min          4.00 (  0.00%)        9.00 (-50.00%)
Success 2 Mean         8.20 (  0.00%)       10.00 (-16.28%)
Success 2 Max         13.00 (  0.00%)       11.00 (  8.33%)
Success 3 Min         75.00 (  0.00%)       74.00 (  1.33%)
Success 3 Mean        75.60 (  0.00%)       75.20 (  0.53%)
Success 3 Max         77.00 (  0.00%)       76.00 (  0.00%)

User                          3344.73       3246.04
System                        1194.24       1172.29
Elapsed                       1838.04       1836.76

                            4.5-rc1+before  4.5-rc1+after
                                   -direct     -direct
Direct pages scanned               125146      120966
Kswapd pages scanned              2119757     2135012
Kswapd pages reclaimed            2073183     2108388
Direct pages reclaimed             124909      120577
Percentage direct scans                5%          5%
THP fault alloc                       599         652
THP collapse alloc                    323         354
THP splits                              0           0
THP fault fallback                    806         793
THP collapse fail                      17          16
Compaction stalls                    2457        2025
Compaction success                    906         518
Compaction failures                  1551        1507
Page migrate success              2031423     2360608
Page migrate failure                32845       40852
Compaction pages isolated         4129761     4802025
Compaction migrate scanned       11996712    21750613
Compaction free scanned         214970969   344372001
Compaction cost                      2271        2694

In this scenario, this patch doesn't change the overall success rate as
direct compaction already tries all it can.  There's however significant
reduction in direct compaction stalls (that is, the number of
allocations that went into direct compaction).  The number of successes
(i.e.  direct compaction stalls that ended up with successful
allocation) is reduced by the same number.  This means the offload to
kcompactd is working as expected, and direct compaction is reduced
either due to detecting contention, or compaction deferred by kcompactd.
In the previous version of this patchset there was some apparent
reduction of success rate, but the changes in this version (such as
using sync compaction only), new baseline kernel, and/or averaging
results from 5 executions (my bet), made this go away.

Ftrace-based stats seem to roughly agree:

Time kswapd awake               2532984     2326824
Time kcompactd awake                  0      257916
Time direct compacting           864839      735130
Time kswapd compacting                0           0
Time kcompactd compacting             0      257585
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can reuse the nid we've determined instead of repeated pfn_to_nid()
usages.  Also zone_to_nid() should be a bit cheaper in general than
pfn_to_nid().
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Memory compaction can be currently performed in several contexts:

 - kswapd balancing a zone after a high-order allocation failure
 - direct compaction to satisfy a high-order allocation, including THP
   page fault attemps
 - khugepaged trying to collapse a hugepage
 - manually from /proc

The purpose of compaction is two-fold.  The obvious purpose is to
satisfy a (pending or future) high-order allocation, and is easy to
evaluate.  The other purpose is to keep overal memory fragmentation low
and help the anti-fragmentation mechanism.  The success wrt the latter
purpose is more

The current situation wrt the purposes has a few drawbacks:

 - compaction is invoked only when a high-order page or hugepage is not
   available (or manually).  This might be too late for the purposes of
   keeping memory fragmentation low.
 - direct compaction increases latency of allocations.  Again, it would
   be better if compaction was performed asynchronously to keep
   fragmentation low, before the allocation itself comes.
 - (a special case of the previous) the cost of compaction during THP
   page faults can easily offset the benefits of THP.
 - kswapd compaction appears to be complex, fragile and not working in
   some scenarios.  It could also end up compacting for a high-order
   allocation request when it should be reclaiming memory for a later
   order-0 request.

To improve the situation, we should be able to benefit from an
equivalent of kswapd, but for compaction - i.e. a background thread
which responds to fragmentation and the need for high-order allocations
(including hugepages) somewhat proactively.

One possibility is to extend the responsibilities of kswapd, which could
however complicate its design too much.  It should be better to let
kswapd handle reclaim, as order-0 allocations are often more critical
than high-order ones.

Another possibility is to extend khugepaged, but this kthread is a
single instance and tied to THP configs.

This patch goes with the option of a new set of per-node kthreads called
kcompactd, and lays the foundations, without introducing any new
tunables.  The lifecycle mimics kswapd kthreads, including the memory
hotplug hooks.

For compaction, kcompactd uses the standard compaction_suitable() and
ompact_finished() criteria and the deferred compaction functionality.
Unlike direct compaction, it uses only sync compaction, as there's no
allocation latency to minimize.

This patch doesn't yet add a call to wakeup_kcompactd.  The kswapd
compact/reclaim loop for high-order pages will be replaced by waking up
kcompactd in the next patch with the description of what's wrong with
the old approach.

Waking up of the kcompactd threads is also tied to kswapd activity and
follows these rules:
 - we don't want to affect any fastpaths, so wake up kcompactd only from
   the slowpath, as it's done for kswapd
 - if kswapd is doing reclaim, it's more important than compaction, so
   don't invoke kcompactd until kswapd goes to sleep
 - the target order used for kswapd is passed to kcompactd

Future possible future uses for kcompactd include the ability to wake up
kcompactd on demand in special situations, such as when hugepages are
not available (currently not done due to __GFP_NO_KSWAPD) or when a
fragmentation event (i.e.  __rmqueue_fallback()) occurs.  It's also
possible to perform periodic compaction with kcompactd.

[arnd@arndb.de: fix build errors with kcompactd]
[paul.gortmaker@windriver.com: don't use modular references for non modular code]
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

During work on kcompactd integration I have spotted a confusing check of
balance_classzone_idx, which I believe is bogus.

The balanced_classzone_idx is filled by balance_pgdat() as the highest
zone it attempted to balance.  This was introduced by commit dc83edd9
("mm: kswapd: use the classzone idx that kswapd was using for
sleeping_prematurely()").

The intention is that (as expressed in today's function names), the
value used for kswapd_shrink_zone() calls in balance_pgdat() is the same
as for the decisions in kswapd_try_to_sleep().

An unwanted side-effect of that commit was breaking the checks in
kswapd() whether there was another kswapd_wakeup with a tighter (=lower)
classzone_idx.  Commits 215ddd66 ("mm: vmscan: only read
new_classzone_idx from pgdat when reclaiming successfully") and
d2ebd0f6 ("kswapd: avoid unnecessary rebalance after an unsuccessful
balancing") tried to fixed, but apparently introduced a bogus check that
this patch removes.

Consider zone indexes X < Y < Z, where:
- Z is the value used for the first kswapd wakeup.
- Y is returned as balanced_classzone_idx, which means zones with index higher
  than Y (including Z) were found to be unreclaimable.
- X is the value used for the second kswapd wakeup

The new wakeup with value X means that kswapd is now supposed to balance
harder all zones with index <= X.  But instead, due to Y < Z, it will go
sleep and won't read the new value X.  This is subtly wrong.

The effect of this patch is that kswapd will react better in some
situations, where e.g.  the first wakeup is for ZONE_DMA32, the second is
for ZONE_DMA, and due to unreclaimable ZONE_NORMAL.  Before this patch,
kswapd would go sleep instead of reclaiming ZONE_DMA harder.  I expect
these situations are very rare, and more value is in better
maintainability due to the removal of confusing and bogus check.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC.  This patch changes the code to query
whether it is enabled or not in runtime.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC.  This patch changes the code to query
whether it is enabled or not in runtime.
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC.  This patch changes the code to query
whether it is enabled or not in runtime.

[akpm@linux-foundation.org: export _debug_pagealloc_enabled to modules]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We can disable debug_pagealloc processing even if the code is compiled
with CONFIG_DEBUG_PAGEALLOC.  This patch changes the code to query
whether it is enabled or not in runtime.

[akpm@linux-foundation.org: clean up code, per Christian]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As CONFIG_DEBUG_PAGEALLOC can be enabled/disabled via kernel parameters
we can optimize some cases by checking the enablement state.

This is follow-up work for Christian's Optimize CONFIG_DEBUG_PAGEALLOC:

  https://lkml.org/lkml/2016/1/27/194

Remaining work is to make sparc to be aware of this but it looks not
easy for me so I skip that in this series.

This patch (of 5):

We can disable debug_pagealloc processing even if the code is complied
with CONFIG_DEBUG_PAGEALLOC.  This patch changes the code to query
whether it is enabled or not in runtime.

[akpm@linux-foundation.org: update comment, per David.  Adjust comment to use 80 cols]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

/proc/pid/pagemap (pte_to_pagemap_entry() internally) already reports
about swap entry, so let's make the in-kernel utility aware of it.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently /proc/kpageflags returns just KPF_COMPOUND_TAIL for slab tail
pages, which is inconvenient when grasping how slab pages are
distributed (userspace always needs to check which kind of tail pages by
itself).  This patch sets KPF_SLAB for such pages.

With this patch:

  $ grep Slab /proc/meminfo ; tools/vm/page-types -b slab
  Slab:              64880 kB
               flags      page-count       MB  symbolic-flags                     long-symbolic-flags
  0x0000000000000080           16220       63  _______S__________________________________ slab
               total           16220       63

16220 pages equals to 64880 kB, so returned result is consistent with the
global counter.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently /proc/kpageflags returns nothing for "tail" buddy pages, which
is inconvenient when grasping how free pages are distributed.  This
patch sets KPF_BUDDY for such pages.

With this patch:

  $ grep MemFree /proc/meminfo ; tools/vm/page-types -b buddy
  MemFree:         3134992 kB
               flags      page-count       MB  symbolic-flags                     long-symbolic-flags
  0x0000000000000400          779272     3044  __________B_______________________________ buddy
  0x0000000000000c00            4385       17  __________BM______________________________ buddy,mmap
               total          783657     3061

783657 pages is 3134628 kB (roughly consistent with the global counter,)
so it's OK.

[akpm@linux-foundation.org: update comment, per Naoya]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com&gt;>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Show how much memory is allocated to kernel stacks.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Show how much memory is used for storing reclaimable and unreclaimable
in-kernel data structures allocated from slab caches.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, tree_{stat,events} helpers can only get one stat index at a
time, so when there are a lot of stats to be reported one has to call it
over and over again (see memory_stat_show).  This is neither effective,
nor does it look good.  Instead, let's make these helpers take a
snapshot of all available counters.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Slab pages are charged in two steps.  First, an appropriate per memcg
cache is selected (see memcg_kmem_get_cache) basing on the current
context, then the new slab page is charged to the memory cgroup which
the selected cache was created for (see memcg_charge_slab ->
__memcg_kmem_charge_memcg).  It is OK to bypass kmemcg charge at step 1,
but if step 1 succeeded and we successfully allocated a new slab page,
step 2 must be performed, otherwise we would get a per memcg kmem cache
which contains a slab that does not hold a reference to the memory
cgroup owning the cache.  Since per memcg kmem caches are destroyed on
memcg css free, this could result in freeing a cache while there are
still active objects in it.

However, currently we will bypass slab page charge if the memory cgroup
owning the cache is offline (see __memcg_kmem_charge_memcg).  This is
very unlikely to occur in practice, because for this to happen a process
must be migrated to a different cgroup and the old cgroup must be
removed while the process is in kmalloc somewhere between steps 1 and 2
(e.g.  trying to allocate a new page).  Nevertheless, it's still better
to eliminate such a possibility.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the OOM killer scans tasks and encounters a PF_EXITING one, it
force-selects that task regardless of the score.  The problem is that if
that task got stuck waiting for some state the allocation site is
holding, the OOM reaper can not move on to the next best victim.

Frankly, I don't even know why we check for exiting tasks in the OOM
killer.  We've tried direct reclaim at least 15 times by the time we
decide the system is OOM, there was plenty of time to exit and free
memory; and a task might exit voluntarily right after we issue a kill.
This is testing pure noise.  Remove it.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Argangeli <andrea@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

While working on a script to restore all sysctl params before a series of
tests I found that writing any value into the
/proc/sys/kernel/{nmi_watchdog,soft_watchdog,watchdog,watchdog_thresh}
causes them to call proc_watchdog_update().

  NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.

There doesn't appear to be a reason for doing this work every time a write
occurs, so only do it when the values change.
Signed-off-by: Josh Hunt <johunt@akamai.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Cc: <stable@vger.kernel.org>	[4.1.x+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 1f330c32 ("drivers/firmware/broadcom/bcm47xx_nvram.c: use
__ioread32_copy() instead of open-coding") switched to use a generic
copy function, but failed to notice that the header pointer is updated
between the two copies, resulting in bogus data being copied in the
latter one.  Fix by keeping the old header pointer.

The patch fixes totally broken networking on WRT54GL router (both LAN and
WLAN interfaces fail to probe).

Fixes: 1f330c32 ("drivers/firmware/broadcom/bcm47xx_nvram.c: use __ioread32_copy() instead of open-coding")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: <stable@vger.kernel.org>	[4.4.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All architectures now need ioremap_uc(), ia64 seems defines this already
through its ioremap_nocache() and it already ensures it *only* uses UC.

This is needed since v4.3 to complete an allyesconfig compile on ia64,
there were others archs that needed this, and this one seems to have
fallen through the cracks.
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Acked-by: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>	[4.3+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fbdev updates from Tomi Valkeinen:

 - Miscallaneous small fixes to various fbdev drivers

 - Remove fb_rotate, which was never used

 - pmag fb improvements

* tag 'fbdev-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (21 commits)
  xen kconfig: don't "select INPUT_XEN_KBDDEV_FRONTEND"
  video: fbdev: sis: remove unused variable
  drivers/video: make fbdev/sunxvr2500.c explicitly non-modular
  drivers/video: make fbdev/sunxvr1000.c explicitly non-modular
  drivers/video: make fbdev/sunxvr500.c explicitly non-modular
  video: exynos: fix modular build
  fbdev: da8xx-fb: fix videomodes of lcd panels
  fbdev: kill fb_rotate
  video: fbdev: bt431: Correct cursor format control macro
  video: fbdev: pmag-ba-fb: Optimize Bt455 colormap addressing
  video: fbdev: pmag-ba-fb: Fix and rework Bt455 colormap handling
  video: fbdev: bt455: Remove unneeded colormap helpers for cursor support
  video: fbdev: pmag-aa-fb: Report video timings
  video: fbdev: pmag-aa-fb: Enable building as a module
  video: fbdev: pmag-aa-fb: Adapt to current APIs
  video: fbdev: pmag-ba-fb: Fix the lower margin size
  fbdev: sh_mobile_lcdc: Use ARCH_RENESAS
  fbdev: n411: check return value
  fbdev: exynos: fix IS_ERR_VALUE usage
  video: Use bool instead int pointer for get_opt_bool() argument
  ...

Pull media updates from Mauro Carvalho Chehab:
 - Added support for some new video formats
 - mn88473 DVB frontend driver got promoted from staging
 - several improvements at the VSP1 driver
 - several cleanups and improvements at the Media Controller
 - added Media Controller support to snd-usb-audio.  Currently, enabled
   only for au0828-based V4L2/DVB boards
 - Several improvements at nuvoton-cir: it now supports wake up codes
 - Add media controller support to em28xx and saa7134 drivers
 - coda driver now accepts NXP distributed firmware files
 - Some legacy SoC camera drivers will be moving to staging, as they're
   outdated and nobody so far is willing to fix and convert them to use
   the current media framework
 - As usual, lots of cleanups, improvements and new board additions.

* tag 'media/v4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (381 commits)
  media: au0828 disable tuner to demod link in au0828_media_device_register()
  [media] touptek: cast char types on %x printk
  [media] touptek: don't DMA at the stack
  [media] mceusb: use %*ph for small buffer dumps
  [media] v4l: exynos4-is: Drop unneeded check when setting up fimc-lite links
  [media] v4l: vsp1: Check if an entity is a subdev with the right function
  [media] hide unused functions for !MEDIA_CONTROLLER
  [media] em28xx: fix Terratec Grabby AC97 codec detection
  [media] media: add prefixes to interface types
  [media] media: rc: nuvoton: switch attribute wakeup_data to text
  [media] v4l2-ioctl: fix YUV422P pixel format description
  [media] media: fix null pointer dereference in v4l_vb2q_enable_media_source()
  [media] v4l2-mc.h: fix yet more compiler errors
  [media] staging/media: add missing TODO files
  [media] media.h: always start with 1 for the audio entities
  [media] sound/usb: Use meaninful names for goto labels
  [media] v4l2-mc.h: fix compiler warnings
  [media] media: au0828 audio mixer isn't connected to decoder
  [media] sound/usb: Use Media Controller API to share media resources
  [media] dw2102: add support for TeVii S662
  ...

Pull libnvdimm updates from Dan Williams:

 - Asynchronous address range scrub:

     Given the capacities of next generation persistent memory devices a
     scrub operation to find all poison may take 10s of seconds.  We
     want this scrub work to be done asynchronously with the rest of
     system initialization, so we move it out of line from the NFIT
     probing, i.e. acpi_nfit_add().

 - Clear poison:

     ACPI 6.1 introduces the ability to send "clear error" commands to
     the ACPI0012:00 device representing the root of an "nvdimm bus".
     Similar to relocating a bad block on a disk, this support clears
     media errors in response to a write.

 - Persistent memory resource tracking:

     A persistent memory range may be designated as simply "reserved" by
     platform firmware in the efi/e820 memory map.  Later when the NFIT
     driver loads it discovers that the range is "Persistent Memory".

     The NFIT bus driver inserts a resource to advertise that
     "persistent" attribute in the system resource tree for /proc/iomem
     and kernel-internal usages.

 - Miscellaneous cleanups and fixes:

     Workaround section misaligned pmem ranges when allocating a struct
     page memmap, fix handling of the read-only case in the ioctl path,
     and clean up block device major number allocation.

* tag 'libnvdimm-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
  libnvdimm, pmem: clear poison on write
  libnvdimm, pmem: fix kmap_atomic() leak in error path
  nvdimm/btt: don't allocate unused major device number
  nvdimm/blk: don't allocate unused major device number
  pmem: don't allocate unused major device number
  ACPI: Change NFIT driver to insert new resource
  resource: Export insert_resource and remove_resource
  resource: Add remove_resource interface
  resource: Change __request_region to inherit from immediate parent
  libnvdimm, pmem: fix ia64 build, use PHYS_PFN
  nfit, libnvdimm: clear poison command support
  libnvdimm, pfn: 'resource'-address and 'size' attributes for pfn devices
  libnvdimm, pmem: adjust for section collisions with 'System RAM'
  libnvdimm, pmem: fix 'pfn' support for section-misaligned namespaces
  libnvdimm: Fix security issue with DSM IOCTL.
  libnvdimm: Clean-up access mode check.
  tools/testing/nvdimm: expand ars unit testing
  nfit: disable userspace initiated ars during scrub
  nfit: scrub and register regions in a workqueue
  nfit, libnvdimm: async region scrub workqueue
  ...

Pull device mapper updates from Mike Snitzer:

 - Most attention this cycle went to optimizing blk-mq request-based DM
   (dm-mq) that is used exclussively by DM multipath:

     - A stable fix for dm-mq that eliminates excessive context
       switching offers the biggest performance improvement (for both
       IOPs and throughput).

     - But more work is needed, during the next cycle, to reduce
       spinlock contention in DM multipath on large NUMA systems.

 - A stable fix for a NULL pointer seen when DM stats is enabled on a DM
   multipath device that must requeue an IO due to path failure.

 - A stable fix for DM snapshot to disallow the COW and origin devices
   from being identical.  This amounts to graceful failure in the face
   of userspace error because these devices shouldn't ever be identical.

 - Stable fixes for DM cache and DM thin provisioning to address crashes
   seen if/when their respective metadata device experiences failures
   that cause the transition to 'fail_io' mode.

 - The DM cache 'mq' policy is now an alias for the 'smq' policy.  The
   'smq' policy proved to be consistently better than 'mq'.  As such
   'mq', with all its complex user-facing tunables, has been eliminated.

 - Improve DM thin provisioning to consistently return -ENOSPC once the
   thin-pool's data volume is out of space.

 - Improve DM core to properly handle error propagation if
   bio_integrity_clone() fails in clone_bio().

 - Other small cleanups and improvements to DM core.

* tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (41 commits)
  dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request()
  dm thin: consistently return -ENOSPC if pool has run out of data space
  dm cache: bump the target version
  dm cache: make sure every metadata function checks fail_io
  dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIO
  dm cache policy smq: clarify that mq registration failure was for 'mq'
  dm: return error if bio_integrity_clone() fails in clone_bio()
  dm thin metadata: don't issue prefetches if a transaction abort has failed
  dm snapshot: disallow the COW and origin devices from being identical
  dm cache: make the 'mq' policy an alias for 'smq'
  dm: drop unnecessary assignment of md->queue
  dm: reorder 'struct mapped_device' members to fix alignment and holes
  dm: remove dummy definition of 'struct dm_table'
  dm: add 'dm_numa_node' module parameter
  dm thin metadata: remove needless newline from subtree_dec() DMERR message
  dm mpath: cleanup reinstate_path() et al based on code review
  dm mpath: remove __pgpath_busy forward declaration, rename to pgpath_busy
  dm mpath: switch from 'unsigned' to 'bool' for flags where appropriate
  dm round robin: use percpu 'repeat_count' and 'current_path'
  dm path selector: remove 'repeat_count' return from .select_path hook
  ...

Pull SCSI updates from James Bottomley:
 "This pull includes driver updates from the usual suspects (stex, hpsa,
  ncr5380, scsi_dh, qla2xxx, be2iscsi, hisi_sas, cxlflash, aacraid,
  mp3sas, megaraid_sas, ibmvscsi, ufs) plus an assortment of
  miscellaneous fixes.

  The major user visible change of this pull is that we've moved from
  monotonically increasing host number to an ida allocated one (meaning
  the numbers get re-used) because someone managed to wrap the count in
  an iscsi system.  We don't believe there will be any adverse
  consequences of this"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (230 commits)
  MAINTAINERS: use new email address for James Bottomley
  mpt3sas: Remove unnecessary synchronize_irq() before free_irq()
  sg: fix dxferp in from_to case
  cxlflash: Increase cmd_per_lun for better throughput
  cxlflash: Fix to avoid unnecessary scan with internal LUNs
  cxlflash: Reorder user context initialization
  cxlflash: Simplify attach path error cleanup
  cxlflash: Split out context initialization
  cxlflash: Unmap problem state area before detaching master context
  cxlflash: Simplify PCI registration
  scsi: storvsc: fix SRB_STATUS_ABORTED handling
  be2iscsi: set the boot_kset pointer to NULL in case of failure
  sd: Fix discard granularity when LBPRZ=1
  be2iscsi: Remove unnecessary synchronize_irq() before free_irq()
  scsi_sysfs: call 'device_add' after attaching device handler
  scsi_dh_emc: update 'access_state' field
  scsi_dh_rdac: update 'access_state' field
  scsi_dh_alua: update 'access_state' field
  scsi_dh_alua: use common definitions for ALUA state
  scsi: Add 'access_state' and 'preferred_path' attribute
  ...

Pull iscsi_ibft update from Konrad Rzeszutek Wilk:
 "A simple patch that had been rattling around in SuSE repo"

* 'stable/for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
  iscsi_ibft: Add prefix-len attr and display netmask

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for v4.6:

  Enumeration:
   - Disable IO/MEM decoding for devices with non-compliant BARs (Bjorn Helgaas)
   - Mark Broadwell-EP Home Agent & PCU as having non-compliant BARs (Bjorn Helgaas

  Resource management:
   - Mark shadow copy of VGA ROM as IORESOURCE_PCI_FIXED (Bjorn Helgaas)
   - Don't assign or reassign immutable resources (Bjorn Helgaas)
   - Don't enable/disable ROM BAR if we're using a RAM shadow copy (Bjorn Helgaas)
   - Set ROM shadow location in arch code, not in PCI core (Bjorn Helgaas)
   - Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs (Bjorn Helgaas)
   - ia64: Use ioremap() instead of open-coded equivalent (Bjorn Helgaas)
   - ia64: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - MIPS: Keep CPU physical (not virtual) addresses in shadow ROM resource (Bjorn Helgaas)
   - Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY (Bjorn Helgaas)
   - Don't leak memory if sysfs_create_bin_file() fails (Bjorn Helgaas)
   - rcar: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)
   - designware: Remove PCI_PROBE_ONLY handling (Lorenzo Pieralisi)

  Virtualization:
   - Wait for up to 1000ms after FLR reset (Alex Williamson)
   - Support SR-IOV on any function type (Kelly Zytaruk)
   - Add ACS quirk for all Cavium devices (Manish Jaggi)

  AER:
   - Rename pci_ops_aer to aer_inj_pci_ops (Bjorn Helgaas)
   - Restore pci_ops pointer while calling original pci_ops (David Daney)
   - Fix aer_inject error codes (Jean Delvare)
   - Use dev_warn() in aer_inject (Jean Delvare)
   - Log actual error causes in aer_inject (Jean Delvare)
   - Log aer_inject error injections (Jean Delvare)

  VPD:
   - Prevent VPD access for buggy devices (Babu Moger)
   - Move pci_read_vpd() and pci_write_vpd() close to other VPD code (Bjorn Helgaas)
   - Move pci_vpd_release() from header file to pci/access.c (Bjorn Helgaas)
   - Remove struct pci_vpd_ops.release function pointer (Bjorn Helgaas)
   - Rename VPD symbols to remove unnecessary "pci22" (Bjorn Helgaas)
   - Fold struct pci_vpd_pci22 into struct pci_vpd (Bjorn Helgaas)
   - Sleep rather than busy-wait for VPD access completion (Bjorn Helgaas)
   - Update VPD definitions (Hannes Reinecke)
   - Allow access to VPD attributes with size 0 (Hannes Reinecke)
   - Determine actual VPD size on first access (Hannes Reinecke)

  Generic host bridge driver:
   - Move structure definitions to separate header file (David Daney)
   - Add pci_host_common_probe(), based on gen_pci_probe() (David Daney)
   - Expose pci_host_common_probe() for use by other drivers (David Daney)

  Altera host bridge driver:
   - Fix altera_pcie_link_is_up() (Ley Foon Tan)

  Cavium ThunderX host bridge driver:
   - Add PCIe host driver for ThunderX processors (David Daney)
   - Add driver for ThunderX-pass{1,2} on-chip devices (David Daney)

  Freescale i.MX6 host bridge driver:
   - Add DT bindings to configure PHY Tx driver settings (Justin Waters)
   - Move imx6_pcie_reset_phy() near other PHY handling functions (Lucas Stach)
   - Move PHY reset into imx6_pcie_establish_link() (Lucas Stach)
   - Remove broken Gen2 workaround (Lucas Stach)
   - Move link up check into imx6_pcie_wait_for_link() (Lucas Stach)

  Freescale Layerscape host bridge driver:
   - Add "fsl,ls2085a-pcie" compatible ID (Yang Shi)

  Intel VMD host bridge driver:
   - Attach VMD resources to parent domain's resource tree (Jon Derrick)
   - Set bus resource start to 0 (Keith Busch)

  Microsoft Hyper-V host bridge driver:
   - Add fwnode_handle to x86 pci_sysdata (Jake Oshins)
   - Look up IRQ domain by fwnode_handle (Jake Oshins)
   - Add paravirtual PCI front-end for Microsoft Hyper-V VMs (Jake Oshins)

  NVIDIA Tegra host bridge driver:
   - Add pci_ops.{add,remove}_bus() callbacks (Thierry Reding)
   - Implement ->{add,remove}_bus() callbacks (Thierry Reding)
   - Remove unused struct tegra_pcie.num_ports field (Thierry Reding)
   - Track bus -> CPU mapping (Thierry Reding)
   - Remove misleading PHYS_OFFSET (Thierry Reding)

  Renesas R-Car host bridge driver:
   - Depend on ARCH_RENESAS, not ARCH_SHMOBILE (Simon Horman)

  Synopsys DesignWare host bridge driver:
   - ARC: Add PCI support (Joao Pinto)
   - Add generic dw_pcie_wait_for_link() (Joao Pinto)
   - Add default link up check if sub-driver doesn't override (Joao Pinto)
   - Add driver for prototyping kits based on ARC SDP (Joao Pinto)

  TI Keystone host bridge driver:
   - Defer probing if devm_phy_get() returns -EPROBE_DEFER (Shawn Lin)

  Xilinx AXI host bridge driver:
   - Use of_pci_get_host_bridge_resources() to parse DT (Bharat Kumar Gogada)
   - Remove dependency on ARM-specific struct hw_pci (Bharat Kumar Gogada)
   - Don't call pci_fixup_irqs() on Microblaze (Bharat Kumar Gogada)
   - Update Zynq binding with Microblaze node (Bharat Kumar Gogada)
   - microblaze: Support generic Xilinx AXI PCIe Host Bridge IP driver (Bharat Kumar Gogada)

  Xilinx NWL host bridge driver:
   - Add support for Xilinx NWL PCIe Host Controller (Bharat Kumar Gogada)

  Miscellaneous:
   - Check device_attach() return value always (Bjorn Helgaas)
   - Move pci_set_flags() from asm-generic/pci-bridge.h to linux/pci.h (Bjorn Helgaas)
   - Remove includes of empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - ARM64: Remove generated include of asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove empty asm-generic/pci-bridge.h (Bjorn Helgaas)
   - Remove includes of asm/pci-bridge.h (Bjorn Helgaas)
   - Consolidate PCI DMA constants and interfaces in linux/pci-dma-compat.h (Bjorn Helgaas)
   - unicore32: Remove unused HAVE_ARCH_PCI_SET_DMA_MASK definition (Bjorn Helgaas)
   - Cleanup pci/pcie/Kconfig whitespace (Andreas Ziegler)
   - Include pci/hotplug Kconfig directly from pci/Kconfig (Bjorn Helgaas)
   - Include pci/pcie/Kconfig directly from pci/Kconfig (Bogicevic Sasa)
   - frv: Remove stray pci_{alloc,free}_consistent() declaration (Christoph Hellwig)
   - Move pci_dma_* helpers to common code (Christoph Hellwig)
   - Add PCI_CLASS_SERIAL_USB_DEVICE definition (Heikki Krogerus)
   - Add QEMU top-level IDs for (sub)vendor & device (Robin H. Johnson)
   - Fix broken URL for Dell biosdevname (Naga Venkata Sai Indubhaskar Jupudi)"

* tag 'pci-v4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (94 commits)
  PCI: Add PCI_CLASS_SERIAL_USB_DEVICE definition
  PCI: designware: Add driver for prototyping kits based on ARC SDP
  PCI: designware: Add default link up check if sub-driver doesn't override
  PCI: designware: Add generic dw_pcie_wait_for_link()
  PCI: Cleanup pci/pcie/Kconfig whitespace
  PCI: Simplify pci_create_attr() control flow
  PCI: Don't leak memory if sysfs_create_bin_file() fails
  PCI: Simplify sysfs ROM cleanup
  PCI: Remove unused IORESOURCE_ROM_COPY and IORESOURCE_ROM_BIOS_COPY
  MIPS: Loongson 3: Keep CPU physical (not virtual) addresses in shadow ROM resource
  MIPS: Loongson 3: Use temporary struct resource * to avoid repetition
  ia64/PCI: Keep CPU physical (not virtual) addresses in shadow ROM resource
  ia64/PCI: Use ioremap() instead of open-coded equivalent
  ia64/PCI: Use temporary struct resource * to avoid repetition
  PCI: Clean up pci_map_rom() whitespace
  PCI: Remove arch-specific IORESOURCE_ROM_SHADOW size from sysfs
  PCI: thunder: Add driver for ThunderX-pass{1,2} on-chip devices
  PCI: thunder: Add PCIe host driver for ThunderX processors
  PCI: generic: Expose pci_host_common_probe() for use by other drivers
  PCI: generic: Add pci_host_common_probe(), based on gen_pci_probe()
  ...

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the majority of changes go into cpufreq and they are
  significant.

  First off, the way CPU frequency updates are triggered is different
  now.  Instead of having to set up and manage a deferrable timer for
  each CPU in the system to evaluate and possibly change its frequency
  periodically, cpufreq governors set up callbacks to be invoked by the
  scheduler on a regular basis (basically on utilization updates).  The
  "old" governors, "ondemand" and "conservative", still do all of their
  work in process context (although that is triggered by the scheduler
  now), but intel_pstate does it all in the callback invoked by the
  scheduler with no need for any additional asynchronous processing.

  Of course, this eliminates the overhead related to the management of
  all those timers, but also it allows the cpufreq governor code to be
  simplified quite a bit.  On top of that, the common code and data
  structures used by the "ondemand" and "conservative" governors are
  cleaned up and made more straightforward and some long-standing and
  quite annoying problems are addressed.  In particular, the handling of
  governor sysfs attributes is modified and the related locking becomes
  more fine grained which allows some concurrency problems to be avoided
  (particularly deadlocks with the core cpufreq code).

  In principle, the new mechanism for triggering frequency updates
  allows utilization information to be passed from the scheduler to
  cpufreq.  Although the current code doesn't make use of it, in the
  works is a new cpufreq governor that will make decisions based on the
  scheduler's utilization data.  That should allow the scheduler and
  cpufreq to work more closely together in the long run.

  In addition to the core and governor changes, cpufreq drivers are
  updated too.  Fixes and optimizations go into intel_pstate, the
  cpufreq-dt driver is updated on top of some modification in the
  Operating Performance Points (OPP) framework and there are fixes and
  other updates in the powernv cpufreq driver.

  Apart from the cpufreq updates there is some new ACPICA material,
  including a fix for a problem introduced by previous ACPICA updates,
  and some less significant changes in the ACPI code, like CPPC code
  optimizations, ACPI processor driver cleanups and support for loading
  ACPI tables from initrd.

  Also updated are the generic power domains framework, the Intel RAPL
  power capping driver and the turbostat utility and we have a bunch of
  traditional assorted fixes and cleanups.

  Specifics:

   - Redesign of cpufreq governors and the intel_pstate driver to make
     them use callbacks invoked by the scheduler to trigger CPU
     frequency evaluation instead of using per-CPU deferrable timers for
     that purpose (Rafael Wysocki).

   - Reorganization and cleanup of cpufreq governor code to make it more
     straightforward and fix some concurrency problems in it (Rafael
     Wysocki, Viresh Kumar).

   - Cleanup and improvements of locking in the cpufreq core (Viresh
     Kumar).

   - Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
     Kumar, Eric Biggers).

   - intel_pstate driver updates including fixes, optimizations and a
     modification to make it enable enable hardware-coordinated P-state
     selection (HWP) by default if supported by the processor (Philippe
     Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
     Franciosi).

   - Operating Performance Points (OPP) framework updates to improve its
     handling of voltage regulators and device clocks and updates of the
     cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).

   - Updates of the powernv cpufreq driver to fix initialization and
     cleanup problems in it and correct its worker thread handling with
     respect to CPU offline, new powernv_throttle tracepoint (Shilpasri
     Bhat).

   - ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).

   - ACPICA updates including one fix for a regression introduced by
     previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box,
     Colin Ian King).

   - Support for installing ACPI tables from initrd (Lv Zheng).

   - Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
     Chaugule).

   - Support for _HID(ACPI0010) devices (ACPI processor containers) and
     ACPI processor driver cleanups (Sudeep Holla).

   - Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
     Aleksey Makarov).

   - Modification of the ACPI PCI IRQ management code to make it treat
     255 in the Interrupt Line register as "not connected" on x86 (as
     per the specification) and avoid attempts to use that value as a
     valid interrupt vector (Chen Fan).

   - ACPI APEI fixes related to resource leaks (Josh Hunt).

   - Removal of modularity from a few ACPI drivers (BGRT, GHES,
     intel_pmic_crc) that cannot be built as modules in practice (Paul
     Gortmaker).

   - PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
     as a valid resource type (Harb Abdulhamid).

   - New device ID (future AMD I2C controller) in the ACPI driver for
     AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).

   - Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).

   - cpuidle menu governor optimization to avoid a square root
     computation in it (Rasmus Villemoes).

   - Fix for potential use-after-free in the generic device properties
     framework (Heikki Krogerus).

   - Updates of the generic power domains (genpd) framework including
     support for multiple power states of a domain, fixes and debugfs
     output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
     Geert Uytterhoeven).

   - Intel RAPL power capping driver updates to reduce IPI overhead in
     it (Jacob Pan).

   - System suspend/hibernation code cleanups (Eric Biggers, Saurabh
     Sengar).

   - Year 2038 fix for the process freezer (Abhilash Jindal).

   - turbostat utility updates including new features (decoding of more
     registers and CPUID fields, sub-second intervals support, GFX MHz
     and RC6 printout, --out command line option), fixes (syscall jitter
     detection and workaround, reductioin of the number of syscalls
     made, fixes related to Xeon x200 processors, compiler warning
     fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)"

* tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits)
  tools/power turbostat: bugfix: TDP MSRs print bits fixing
  tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
  tools/power turbostat: call __cpuid() instead of __get_cpuid()
  tools/power turbostat: indicate SMX and SGX support
  tools/power turbostat: detect and work around syscall jitter
  tools/power turbostat: show GFX%rc6
  tools/power turbostat: show GFXMHz
  tools/power turbostat: show IRQs per CPU
  tools/power turbostat: make fewer systems calls
  tools/power turbostat: fix compiler warnings
  tools/power turbostat: add --out option for saving output in a file
  tools/power turbostat: re-name "%Busy" field to "Busy%"
  tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
  tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
  tools/power turbostat: allow sub-sec intervals
  ACPI / APEI: ERST: Fixed leaked resources in erst_init
  ACPI / APEI: Fix leaked resources
  intel_pstate: Do not skip samples partially
  intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
  intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
  ...

Merge first patch-bomb from Andrew Morton:

 - some misc things

 - ofs2 updates

 - about half of MM

 - checkpatch updates

 - autofs4 update

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (120 commits)
  autofs4: fix string.h include in auto_dev-ioctl.h
  autofs4: use pr_xxx() macros directly for logging
  autofs4: change log print macros to not insert newline
  autofs4: make autofs log prints consistent
  autofs4: fix some white space errors
  autofs4: fix invalid ioctl return in autofs4_root_ioctl_unlocked()
  autofs4: fix coding style line length in autofs4_wait()
  autofs4: fix coding style problem in autofs4_get_set_timeout()
  autofs4: coding style fixes
  autofs: show pipe inode in mount options
  kallsyms: add support for relative offsets in kallsyms address table
  kallsyms: don't overload absolute symbol type for percpu symbols
  x86: kallsyms: disable absolute percpu symbols on !SMP
  checkpatch: fix another left brace warning
  checkpatch: improve UNSPECIFIED_INT test for bare signed/unsigned uses
  checkpatch: warn on bare unsigned or signed declarations without int
  checkpatch: exclude asm volatile from complex macro check
  mm: memcontrol: drop unnecessary lru locking from mem_cgroup_migrate()
  mm: migrate: consolidate mem_cgroup_migrate() calls
  mm/compaction: speed up pageblock_pfn_to_page() when zone is contiguous
  ...

Pull m68k updates from Geert Uytterhoeven.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix misspellings in comments.
  m68k: Use conventional function parameters for do_sigreturn
  zorro: Use kobj_to_dev()

Pull s390 updates from Martin Schwidefsky:

 - Add the CPU id for the new z13s machine

 - Add a s390 specific XOR template for RAID-5 checksumming based on the
   XC instruction.  Remove all other alternatives, XC is always faster

 - The merge of our four different stack tracers into a single one

 - Tidy up the code related to page tables, several large inline
   functions are now out-of-line.  Bloat-o-meter reports ~11K text size
   reduction

 - A binary interface for the priviledged CLP instruction to retrieve
   the hardware view of the installed PCI functions

 - Improvements for the dasd format code

 - Bug fixes and cleanups

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (31 commits)
  s390/pci: enforce fmb page boundary rule
  s390: fix floating pointer register corruption (again)
  s390/cpumf: add missing lpp magic initialization
  s390: Fix misspellings in comments
  s390/mm: split arch/s390/mm/pgtable.c
  s390/mm: uninline pmdp_xxx functions from pgtable.h
  s390/mm: uninline ptep_xxx functions from pgtable.h
  s390/pci: add ioctl interface for CLP
  s390: Use pr_warn instead of pr_warning
  s390/dasd: remove casts to dasd_*_private
  s390/dasd: Refactor dasd format functions
  s390/dasd: Simplify code in format logic
  s390/dasd: Improve dasd format code
  s390/percpu: remove this_cpu_cmpxchg_double_4
  s390/cpumf: Improve guest detection heuristics
  s390/fault: merge report_user_fault implementations
  s390/dis: use correct escape sequence for '%' character
  s390/kvm: simplify set_guest_storage_key
  s390/oprofile: add z13/z13s model numbers
  s390: add z13s model number to z13 elf platform
  ...

Pull AVR32 updates from Hans-Christian Egtvedt.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/linux-avr32:
  avr32: fix asm operand constraint in cmpxchg()
  avr32: wire up copy_file_range syscall

Pull KVM updates from Paolo Bonzini:
 "One of the largest releases for KVM...  Hardly any generic
  changes, but lots of architecture-specific updates.

  ARM:
   - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
   - PMU support for guests
   - 32bit world switch rewritten in C
   - various optimizations to the vgic save/restore code.

  PPC:
   - enabled KVM-VFIO integration ("VFIO device")
   - optimizations to speed up IPIs between vcpus
   - in-kernel handling of IOMMU hypercalls
   - support for dynamic DMA windows (DDW).

  s390:
   - provide the floating point registers via sync regs;
   - separated instruction vs.  data accesses
   - dirty log improvements for huge guests
   - bugfixes and documentation improvements.

  x86:
   - Hyper-V VMBus hypercall userspace exit
   - alternative implementation of lowest-priority interrupts using
     vector hashing (for better VT-d posted interrupt support)
   - fixed guest debugging with nested virtualizations
   - improved interrupt tracking in the in-kernel IOAPIC
   - generic infrastructure for tracking writes to guest
     memory - currently its only use is to speedup the legacy shadow
     paging (pre-EPT) case, but in the future it will be used for
     virtual GPUs as well
   - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits)
  KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
  KVM: x86: disable MPX if host did not enable MPX XSAVE features
  arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit
  arm64: KVM: vgic-v3: Reset LRs at boot time
  arm64: KVM: vgic-v3: Do not save an LR known to be empty
  arm64: KVM: vgic-v3: Save maintenance interrupt state only if required
  arm64: KVM: vgic-v3: Avoid accessing ICH registers
  KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
  KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
  KVM: arm/arm64: vgic-v2: Reset LRs at boot time
  KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
  KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
  KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
  KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
  KVM: s390: allocate only one DMA page per VM
  KVM: s390: enable STFLE interpretation only if enabled for the guest
  KVM: s390: wake up when the VCPU cpu timer expires
  KVM: s390: step the VCPU timer while in enabled wait
  KVM: s390: protect VCPU cpu timer with a seqcount
  KVM: s390: step VCPU cpu timer during kvm_run ioctl
  ...

Pull EDAC updates from Borislav Petkov:

 - Altera: L2 cache and On-Chip RAM support (Thor Thayer).

 - EDAC: Workqueue handling cleanups (Borislav Petkov).

 - Xgene: Register bus error handling (Loc Ho).

 - Misc small fixes.

* tag 'edac_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  ARM: socfpga: Enable OCRAM ECC on startup
  ARM: socfpga: Enable L2 cache ECC on startup
  ARM: dts: Add Altera L2 Cache and OCRAM EDAC entries
  EDAC, altera: Add Altera L2 cache and OCRAM support
  EDAC: Use edac_debugfs_remove_recursive() in edac_debugfs_exit()
  EDAC, mpc85xx: Silence unused variable warning
  EDAC: Cleanup/sync workqueue functions
  EDAC: Kill workqueue setup/teardown functions
  EDAC: Balance workqueue setup and teardown
  arm64: Update the APM X-Gene EDAC node with the RB register resource
  EDAC, xgene: Add missing SoC register bus error handling
  Documentation, EDAC: Update xgene binding for missing register bus
  EDAC, amd64_edac: Shift wrapping issue in f1x_get_norm_dct_addr()

Pull LED updates from Jacek Anaszewski:
 "LED core improvements:
   - Fix misleading comment after workqueue removal from drivers
   - Avoid error message when a USB LED device is unplugged
   - Add helpers for calling brightness_set(_blocking)

  LED triggers:
   - Simplify led_trigger_store by using sysfs_streq()

  LED class drivers improvements:
   - Improve wording and formatting in a comment: lp3944
   - Fix return value check in create_gpio_led(): leds-gpio
   - Use GPIOF_OUT_INIT_LOW instead of hardcoded zero: leds-gpio
   - Use devm_led_classdev_register(): leds-lm3533, leds-lm3533,
     leds-lp8788, leds-wm831x-status, leds-s3c24xx, leds-s3c24xx,
     leds-max8997.

  New LED class driver:
   - Add driver for the ISSI IS31FL32xx family of LED controllers.

  Device Tree documentation:
   - of: Add vendor prefixes for Integrated Silicon Solutions Inc.
     (issi) and Si-En Technology (si-en).
   - DT: Add common bindings for Si-En Technology SN3216/18 and
     IS31FL32xx family of LED controllers, since they seem to be the
     same hardware, just rebranded"

* tag 'leds_for_4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: triggers: simplify led_trigger_store
  leds: max8997: Use devm_led_classdev_register
  leds: da903x: Use devm_led_classdev_register
  leds: s3c24xx: Use devm_led_classdev_register
  leds: wm831x-status: Use devm_led_classdev_register
  leds: lp8788: Use devm_led_classdev_register
  leds: 88pm860x: Use devm_led_classdev_register
  leds: Add SN3218 and SN3216 support to the IS31FL32XX driver
  of: Add vendor prefix for Si-En Technology
  leds: Add driver for the ISSI IS31FL32xx family of LED controllers
  DT: leds: Add binding for the ISSI IS31FL32xx family of LED controllers
  DT: Add vendor prefix for Integrated Silicon Solutions Inc.
  leds: lm3533: Use devm_led_classdev_register
  leds: gpio: Use GPIOF_OUT_INIT_LOW instead of hardcoded zero
  leds: core: add helpers for calling brightness_set(_blocking)
  leds: leds-gpio: Fix return value check in create_gpio_led()
  leds: lp3944: improve wording and formatting in a comment
  leds: core: avoid error message when a USB LED device is unplugged
  leds: core: fix misleading comment after workqueue removal from drivers

Pull RTC updates from Alexandre Belloni:
 "Core:
   - New sysfs interface to set and read clock offset
   - Drivers can now be both I2C and SPI (see pcf2127 and ds3232)

  New drivers:
   - Alphascale ASM9260
   - Epson RX6110SA
   - Maxim max20024 and max77620 (in max77686)
   - Microchip PIC32
   - NXP pcf2129 (in pcf2127)

  Subsystem wide cleanups:
   - remove IRQF_EARLY_RESUME when unecessary

  Drivers:
   - ds1307: clock output, temperature sensor and wakeup-source support
   - ds1685: actually spin forever in poweroff error path
   - ds3232: many cleanups
   - ds3234: merged in ds3232
   - hym8563: fix invalid year calculation
   - max77686: many cleanups
   - max77802 merged in max77686
   - pcf2123: cleanups and offset support
   - pcf85063: cleanups
   - pcf8523: propely handle oscillator stop bit
   - rv3029: many cleanups, trickle charger and temperature sensor support
   - rv8803: convert spin_lock to mutex_lock
   - rx8025: many fixes
   - vr41xx: restore alarm_irq_enable"

* tag 'rtc-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (86 commits)
  rtc: pcf2127: add pcf2129 device id
  rtc: pcf2127: add support for spi interface
  rtc: pcf2127: convert to use regmap
  rtc: rv3029: Add thermometer hwmon support
  rtc: rv3029: Add update_bits helper for eeprom access
  rtc: ds1685: actually spin forever in poweroff error path
  rtc: hym8563: fix invalid year calculation
  rtc: ds3232: use rtc->ops_lock to protect alarm operations
  rtc: ds3232: fix issue when irq is shared several devices
  rtc: ds3232: remove unused UIE code
  rtc: ds3232: add register access error checks
  rtc: ds3232: fix read on /dev/rtc after RTC_AIE_ON
  rtc: merge ds3232 and ds3234
  rtc: ds3232: convert to use regmap
  rtc: pxa: fix Kconfig indentation
  rtc: rv3029: Add device tree property for trickle charger
  rtc: rv3029: Add functions for EEPROM access
  rtc: rv3029: Add i2c register update-bits helper
  rtc: rv3029: Add missing register definitions
  rtc: rv3029: Add "rv3029" I2C device id
  ...

Merge tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 - New drivers for NSA320 and LTC2990
 - Added support for ADM1278 to adm1275 driver
 - Added support for ncpXXxh103 to ntc_thermistor driver
 - Renamed vexpress hwmon implementation
 - Minor cleanups and improvements

* tag 'hwmon-for-linus-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: Create an NSA320 hardware monitoring driver
  hwmon: Define binding for the nsa320-hwmon driver
  hwmon: (adm1275) Add support for ADM1278
  hwmon: (ntc_thermistor) Add support for ncpXXxh103
  Doc: hwmon: Fix typo "montoring" in hwmon
  ARM: dts: vfxxx: Add iio_hwmon node for ADC temperature channel
  ARM: dts: Change iio_hwmon nodes to use hypen in node names
  hwmon: (iio_hwmon) Allow the driver to accept hypen in device tree node names
  hwmon: Add LTC2990 sensor driver
  hwmon: (vexpress) rename vexpress hwmon implementation

Pull regulator updates from Mark Brown:
 "This has been an extremely quiet release for the regulator API, aside
  from bugfixes and small enhancements the only thing that really stands
  out are the new drivers for Action Semiconductors ACT8945A, HiSilicon
  HI665x, and the Maxim MAX20024 and MAX77620"

* tag 'regulator-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (46 commits)
  regulator: pwm: Add support to have multiple instance of pwm regulator
  regulator: pwm: Fix calculation of voltage-to-duty cycle
  regulator: of: Use of_property_read_u32() for reading min/max
  regulator: pv88060: fix incorrect clear of event register
  regulator: pv88090: fix incorrect clear of event register
  regulator: max77620: Add support to configure active-discharge
  regulator: core: Add support for active-discharge configuration
  regulator: helper: Add helper to configure active-discharge using regmap
  regulator: core: Add support for active-discharge configuration
  regulator: DT: Add DT property for active-discharge configuration
  regulator: act8865: Specify fixed voltage of 3.3V for ACT8600's REG9
  regulator: act8865: Rename platform_data field to init_data
  regulator: act8865: Remove "static" from local variable
  ASoC: cs4271: add regulator consumer support
  regulator: max77620: Remove duplicate module alias
  regulator: max77620: Eliminate duplicate code
  regulator: max77620: Remove unused fields
  regulator: core: fix crash in error path of regulator_register
  regulator: core: Request GPIO before creating sysfs entries
  regulator: gpio: don't print error on EPROBE_DEFER
  ...

Pull regmap updates from Mark Brown:
 "This has been a very busy release for regmap, not just in cleaning up
  the mess we got ourselves into with the endianness handling but also
  in other areas too:

   - Fixes for the endianness handling so that we now explicitly default
     to little endian (the code used to do this by accident).  This
     fixes handling of explictly specified endianness on big endian
     systems.

   - Optimisation of the implementation of register striding.

   - A refectoring of the _update_bits() code to reduce duplication.

   - Fixes and enhancements for the interrupt implementation which make
     it easier to use in a wider range of systems"

* tag 'regmap-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (28 commits)
  regmap: irq: add devm apis for regmap_{add,del}_irq_chip
  regmap: replace regmap_write_bits()
  regmap: irq: Enable irq retriggering for nested irqs
  regmap: add regmap_fields_force_xxx() macros
  regmap: add regmap_field_force_xxx() macros
  regmap: merge regmap_fields_update_bits() into macro
  regmap: merge regmap_fields_write() into macro
  regmap: add regmap_fields_update_bits_base()
  regmap: merge regmap_field_update_bits() into macro
  regmap: merge regmap_field_write() into macro
  regmap: add regmap_field_update_bits_base()
  regmap: merge regmap_update_bits_check_async() into macro
  regmap: merge regmap_update_bits_check() into macro
  regmap: merge regmap_update_bits_async() into macro
  regmap: merge regmap_update_bits() into macro
  regmap: add regmap_update_bits_base()
  regcache: flat: Introduce register strider order
  regcache: Introduce the index parsing API by stride order
  regmap: core: Introduce register stride order
  regmap: irq: add devm apis for regmap_{add,del}_irq_chip
  ...