- 29 Aug, 2017 30 commits
-
-
Harvey Hunt authored
Create a defconfig for the Omega2+ that reaches userspace and allows use of the USB port. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17138/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
The Onion Omega2+ is an MT7688A based board that has 128MB RAM and multiple peripherals. The MT7688A is pin compatible with the MT7628A, although the former supports a 1T1R antenna whereas the MT7628A supports a 2R2T antenna. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17137/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
Enabled supported drivers, including: - USB PHY - EHCI - UART Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17135/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
The VoCore2 board is a low cost MT7628A based board with 128MB RAM, 16MB flash and multiple external peripherals. This initial DTS provides enough support to get to userland and use the USB port. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17134/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
VoCore are a manufacturer of devices such as the VoCore2. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Acked-by: Rob Herring <robh@kernel.org> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17132/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
The MT7628A is the successor to the MT7620 and pin compatible with the MT7688A, although the latter supports only a 1T1R antenna rather than a 2T2R antenna. This commit adds support for the following features: - UART - USB PHY - EHCI - Interrupt controller - System controller - Memory controller - Reset controller Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: john@phrozen.org Cc: Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Patchwork: https://patchwork.linux-mips.org/patch/17133/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
This introduces threaded carddetect irqs for the db1200/db1300 boards. Main benefit is that the broken insertion/ejection interrupt pairs can now be better supported and debounced in software. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15287/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
No advanced MIPS features for Alchemy. This patch shaves additional 43kB off the DB1300 kernel (~0.5% size reduction). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15286/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
Prints the devboard name in cpuinfo "machine" line. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15285/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Manuel Lauss authored
GCC-7 complains about a boolean value being used with an arithmetic AND: arch/mips/math-emu/cp1emu.c: In function 'cop1Emulate': arch/mips/math-emu/cp1emu.c:838:14: warning: '~' on a boolean expression [-Wbool-operation] fpr = (x) & ~(cop1_64bit(xcp) == 0); \ ^ arch/mips/math-emu/cp1emu.c:1068:3: note: in expansion of macro 'DITOREG' DITOREG(dval, MIPSInst_RT(ir)); ^~~~~~~ arch/mips/math-emu/cp1emu.c:838:14: note: did you mean to use logical not? fpr = (x) & ~(cop1_64bit(xcp) == 0); \ Since cop1_64bit() returns and int, just flip the LSB. Suggested-by: Maciej W. Rozycki <macro@imgtec.com> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Reviewed-by: Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17058/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
Add devicetree nodes for the DM9000 and the ethernet power regulator. Additionally, add a new pinctrl node for the ethernet chip's pins. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16752/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Harvey Hunt authored
Update the Ci20's defconfig to enable the JZ4780's GPIO driver. Signed-off-by: Harvey Hunt <harvey.hunt@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16751/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Move the NI 169445 board flattened image tree source into its own file which is concatenated into the final image tree source used to build the flattened image tree. Separating boards into different files will help us to avoid conflicts as boards are added. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Nathan Sullivan <nathan.sullivan@ni.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16940/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Move the Boston board flattened image tree source into its own file which is concatenated into the final image tree source used to build the flattened image tree. Separating boards into different files will help us to avoid conflicts as boards are added. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16939/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
In preparation for splitting arch/mips/generic/vmlinux.its.S into multiple files such that it doesn't become a conflict magnet as boards are added, allow platforms to specify a list of image tree source files which will be concatenated to form the final source used to build the image tree. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16938/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Petar Jovanovic authored
Define Cavium Octeon as a CPU that has support for mips32r1, mips32r2 and mips64r1. This will affect show_cpuinfo() that will now correctly expose mips32r1, mips32r2 and mips64r1 as supported ISAs. Signed-off-by: Petar Jovanovic <petar.jovanovic@rt-rk.com> Reviewed-by: Maciej W. Rozycki <macro@imgtec.com> Acked-by: David Daney <david.daney@cavium.com> Cc: petar.jovanovic@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15749/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Based on discussion with Linus remove the impossible to reach code rather than replacing it with a BUG(). Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Link: http://lkml.kernel.org/r/20170718140651.15973-4-ebiederm@xmission.com
-
Nathan Sullivan authored
Support the National Instruments 169445 board. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16782/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Philipp Zabel authored
Commit a53e35db ("reset: Ensure drivers are explicit when requesting reset lines") started to transition the reset control request API calls to explicitly state whether the driver needs exclusive or shared reset control behavior. Convert all drivers requesting exclusive resets to the explicit API call so the temporary transition helpers can be removed. No functional changes. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16785/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
When the upstream kernel pistachio_defconfig is built & tested on the ci40 platform the current lack of these options leads to essentially false failures when the RFS fails to mount. Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: James Hartley <james.hartley@sondrel.com> Cc: Ionela Voinescu <ionela.voinescu@imgtec.com> Cc: James Hartley <james.hartley@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16763/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Dou Liyang authored
Commit a7be6e5a ("mm: drop useless local parameters of __register_one_node()") removes the last user of parent_node(). The parent_node() macros in both IP27 and Loongson64 are unnecessary. Remove it for cleanup. Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16873/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Steven J. Hill authored
Compile USB driver statically, enable EDAC driver, and remove deprecated options. Signed-off-by: Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16795/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Commit 1a3d5957 ("MIPS: Tidy up FPU context switching") removed usage of ST_OFF, leaving it behind as dead code. Commit 828d1e4e ("MIPS: Remove dead define of ST_OFF") then removed the definition of ST_OFF from r4k_switch.S as a cleanup. However the unused definition of ST_OFF has been left behind in r2300_switch.S. Remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16239/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Move _save_fp(), _restore_fp() & _init_fpu() out of r2300_switch.S & into r2300_fpu.S. This logically places all FP-related asm code into r2300_fpu.S & provides consistency with R4K after the preceding commit. Besides cleaning up this will be useful for later patches which disable FP support. [ralf@linux-mips.org: Fixed build issues reported by Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16238/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
Move _save_fp(), _restore_fp(), _save_msa(), _restore_msa(), _init_msa_upper() & _init_fpu() out of r4k_switch.S & into r4k_fpu.S. This allows us to clean up the way in which Octeon includes the default r4k implementations of these FP functions despite replacing resume(), and makes CONFIG_R4K_FPU more straightforwardly represent all configurations that have an R4K-style FPU, including Octeon. Besides cleaning up this will be useful for later patches which disable FP support. [ralf@linux-mips.org: Fixed build issues reported by Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16237/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Paul Burton authored
The kernel contains a small amount of incomplete code aimed at supporting old R6000 CPUs. This is: - Unused, as no machine selects CONFIG_SYS_HAS_CPU_R6000. - Broken, since there are glaring errors such as r6000_fpu.S moving the FCSR register to t1, then ignoring it & instead saving t0 into struct sigcontext... - A maintenance headache, since it's code that nobody can test which nevertheless imposes constraints on code which it shares with other machines. Remove this incomplete & broken R6000 CPU support in order to clean up and in preparation for changes which will no longer need to consider dragging the pretense of R6000 support along with them. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16236/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
The r2_decoder_tables are never modified. They are arrays of constant values and as such should be declared const. This change saves 256 bytes of kernel text, and 128 bytes of kernel data (384 bytes total) on a 32r6el_defconfig (with SMP disabled) Before: text data bss dec hex filename 5576221 1080804 267040 6924065 69a721 vmlinux After: text data bss dec hex filename 5575965 1080676 267040 6923681 69a5a1 vmlinux Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15289/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Matt Redfearn authored
smp_ops providers do not modify their ops structures, so they should be made const for robustness. Since currently the MIPS kernel is not mapped with memory protection, this does not in itself provide any security benefit, but it still makes sense to make this change. There are also slight code size efficincies from the structure being made read-only, saving 128 bytes of kernel text on a pistachio_defconfig. Before: text data bss dec hex filename 7187239 1772752 470224 9430215 8fe4c7 vmlinux After: text data bss dec hex filename 7187111 1772752 470224 9430087 8fe447 vmlinux Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Doug Ledford <dledford@redhat.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Joe Perches <joe@perches.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16784/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Krzysztof Kozlowski authored
Remove options which do not exist anymore: - CPU_FREQ_DEBUG is gone since commit 2d06d8c4 ("[CPUFREQ] use dynamic debug instead of custom infrastructure"). - ECONET is gone since commit 349f29d8 ("econet: remove ancient bug ridden protocol"); - IPDDP_DECAP is gone since commit 9b5645b5 ("appletalk: remove "config IPDDP_DECAP""); Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16770/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
Rob Herring authored
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/16783/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
- 28 Aug, 2017 5 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU fix from Joerg Roedel: "Another fix, this time in common IOMMU sysfs code. In the conversion from the old iommu sysfs-code to the iommu_device_register interface, I missed to update the release path for the struct device associated with an IOMMU. It freed the 'struct device', which was a pointer before, but is now embedded in another struct. Freeing from the middle of allocated memory had all kinds of nasty side effects when an IOMMU was unplugged. Unfortunatly nobody unplugged and IOMMU until now, so this was not discovered earlier. The fix is to make the 'struct device' a pointer again" * tag 'iommu-fixes-v4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Fix wrong freeing of iommu_device->dev
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc fix from Greg KH: "Here is a single misc driver fix for 4.13-rc7. It resolves a reported problem in the Android binder driver due to previous patches in 4.13-rc. It's been in linux-next with no reported issues" * tag 'char-misc-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: ANDROID: binder: fix proc->tsk check.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/iio fixes from Greg KH: "Here are few small staging driver fixes, and some more IIO driver fixes for 4.13-rc7. Nothing major, just resolutions for some reported problems. All of these have been in linux-next with no reported problems" * tag 'staging-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: magnetometer: st_magn: remove ihl property for LSM303AGR iio: magnetometer: st_magn: fix status register address for LSM303AGR iio: hid-sensor-trigger: Fix the race with user space powering up sensors iio: trigger: stm32-timer: fix get trigger mode iio: imu: adis16480: Fix acceleration scale factor for adis16480 PATCH] iio: Fix some documentation warnings staging: rtl8188eu: add RNX-N150NUB support Revert "staging: fsl-mc: be consistent when checking strcmp() return" iio: adc: stm32: fix common clock rate iio: adc: ina219: Avoid underflow for sleeping time iio: trigger: stm32-timer: add enable attribute iio: trigger: stm32-timer: fix get/set down count direction iio: trigger: stm32-timer: fix write_raw return value iio: trigger: stm32-timer: fix quadrature mode get routine iio: bmp280: properly initialize device for humidity reading
-
git://github.com/jonmason/ntbLinus Torvalds authored
Pull NTB fixes from Jon Mason: "NTB bug fixes to address an incorrect ntb_mw_count reference in the NTB transport, improperly bringing down the link if SPADs are corrupted, and an out-of-order issue regarding link negotiation and data passing" * tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb: ntb: ntb_test: ensure the link is up before trying to configure the mws ntb: transport shouldn't disable link due to bogus values in SPADs ntb: use correct mw_count function in ntb_tool and ntb_transport
-
- 27 Aug, 2017 3 commits
-
-
Linus Torvalds authored
The "lock_page_killable()" function waits for exclusive access to the page lock bit using the WQ_FLAG_EXCLUSIVE bit in the waitqueue entry set. That means that if it gets woken up, other waiters may have been skipped. That, in turn, means that if it sees the page being unlocked, it *must* take that lock and return success, even if a lethal signal is also pending. So instead of checking for lethal signals first, we need to check for them after we've checked the actual bit that we were waiting for. Even if that might then delay the killing of the process. This matches the order of the old "wait_on_bit_lock()" infrastructure that the page locking used to use (and is still used in a few other areas). Note that if we still return an error after having unsuccessfully tried to acquire the page lock, that is ok: that means that some other thread was able to get ahead of us and lock the page, and when that other thread then unlocks the page, the wakeup event will be repeated. So any other pending waiters will now get properly woken up. Fixes: 62906027 ("mm: add PageWaiters indicating tasks are waiting for a page bit") Cc: Nick Piggin <npiggin@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Jan Kara <jack@suse.cz> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Andi Kleen <ak@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Tim Chen and Kan Liang have been battling a customer load that shows extremely long page wakeup lists. The cause seems to be constant NUMA migration of a hot page that is shared across a lot of threads, but the actual root cause for the exact behavior has not been found. Tim has a patch that batches the wait list traversal at wakeup time, so that we at least don't get long uninterruptible cases where we traverse and wake up thousands of processes and get nasty latency spikes. That is likely 4.14 material, but we're still discussing the page waitqueue specific parts of it. In the meantime, I've tried to look at making the page wait queues less expensive, and failing miserably. If you have thousands of threads waiting for the same page, it will be painful. We'll need to try to figure out the NUMA balancing issue some day, in addition to avoiding the excessive spinlock hold times. That said, having tried to rewrite the page wait queues, I can at least fix up some of the braindamage in the current situation. In particular: (a) we don't want to continue walking the page wait list if the bit we're waiting for already got set again (which seems to be one of the patterns of the bad load). That makes no progress and just causes pointless cache pollution chasing the pointers. (b) we don't want to put the non-locking waiters always on the front of the queue, and the locking waiters always on the back. Not only is that unfair, it means that we wake up thousands of reading threads that will just end up being blocked by the writer later anyway. Also add a comment about the layout of 'struct wait_page_key' - there is an external user of it in the cachefiles code that means that it has to match the layout of 'struct wait_bit_key' in the two first members. It so happens to match, because 'struct page *' and 'unsigned long *' end up having the same values simply because the page flags are the first member in struct page. Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Christopher Lameter <cl@linux.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by: Doug Nazar <nazard@nazar.ca> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 26 Aug, 2017 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - a tweak to the IBM Trackpoint driver that helps recognizing trackpoints on never Lenovo Carbons - a fix to the ALPS driver solving scroll issues on some Dells - yet another ACPI ID has been added to Elan I2C toucpad driver - quieted diagnostic message in soc_button_array driver * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ALPS - fix two-finger scroll breakage in right side on ALPS touchpad Input: soc_button_array - silence -ENOENT error on Dell XPS13 9365 Input: trackpoint - add new trackpoint firmware ID Input: elan_i2c - add ELAN0602 ACPI ID to support Lenovo Yoga310
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull PCI fix from Bjorn Helgaas: "Remove needlessly alarming MSI affinity warning (this is not actually a bug fix, but the warning prompts unnecessary bug reports)" * tag 'pci-v4.13-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI/MSI: Don't warn when irq_create_affinity_masks() returns NULL
-