- 04 Jun, 2014 40 commits
-
-
Mel Gorman authored
shmem_getpage_gfp uses an atomic operation to set the SwapBacked field before it's even added to the LRU or visible. This is unnecessary as what could it possible race against? Use an unlocked variant. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
cold is a bool, make it one. Make the likely case the "if" part of the block instead of the else as according to the optimisation manual this is preferred. Signed-off-by:
-
Mel Gorman authored
X86 prefers the use of unsigned types for iterators and there is a tendency to mix whether a signed or unsigned type if used for page order. This converts a number of sites in mm/page_alloc.c to use unsigned int for order where possible. Signed-off-by:
-
Mel Gorman authored
get_pageblock_migratetype() is called during free with IRQs disabled. This is unnecessary and disables IRQs for longer than necessary. Signed-off-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Mel Gorman authored
In the free path we calculate page_to_pfn multiple times. Reduce that. Signed-off-by:
-
Mel Gorman authored
The test_bit operations in get/set pageblock flags are expensive. This patch reads the bitmap on a word basis and use shifts and masks to isolate the bits of interest. Similarly masks are used to set a local copy of the bitmap and then use cmpxchg to update the bitmap if there have been no other changes made in parallel. In a test running dd onto tmpfs the overhead of the pageblock-related functions went from 1.27% in profiles to 0.5%. In addition to the performance benefits, this patch closes races that are possible between: a) get_ and set_pageblock_migratetype(), where get_pageblock_migratetype() reads part of the bits before and other part of the bits after set_pageblock_migratetype() has updated them. b) set_pageblock_migratetype() and set_pageblock_skip(), where the non-atomic read-modify-update set bit operation in set_pageblock_skip() will cause lost updates to some bits changed in the set_pageblock_migratetype(). Joonsoo Kim first reported the case a) via code inspection. Vlastimil Babka's testing with a debug patch showed that either a) or b) occurs roughly once per mmtests' stress-highalloc benchmark (although not necessarily in the same pageblock). Furthermore during development of unrelated compaction patches, it was observed that frequent calls to {start,undo}_isolate_page_range() the race occurs several thousands of times and has resulted in NULL pointer dereferences in move_freepages() and free_one_page() in places where free_list[migratetype] is manipulated by e.g. list_move(). Further debugging confirmed that migratetype had invalid value of 6, causing out of bounds access to the free_list array. That confirmed that the race exist, although it may be extremely rare, and currently only fatal where page isolation is performed due to memory hot remove. Races on pageblocks being updated by set_pageblock_migratetype(), where both old and new migratetype are lower MIGRATE_RESERVE, currently cannot result in an invalid value being observed, although theoretically they may still lead to unexpected creation or destruction of MIGRATE_RESERVE pageblocks. Furthermore, things could get suddenly worse when memory isolation is used more, or when new migratetypes are added. After this patch, the race has no longer been observed in testing. Signed-off-by:Joonsoo Kim <iamjoonsoo.kim@lge.com> Reported-and-tested-by:
-
Mel Gorman authored
ALLOC_NO_WATERMARK is set in a few cases. Always by kswapd, always for __GFP_MEMALLOC, sometimes for swap-over-nfs, tasks etc. Each of these cases are relatively rare events but the ALLOC_NO_WATERMARK check is an unlikely branch in the fast path. This patch moves the check out of the fast path and after it has been determined that the watermarks have not been met. This helps the common fast path at the cost of making the slow path slower and hitting kswapd with a performance cost. It's a reasonable tradeoff. Signed-off-by:
-
Mel Gorman authored
Currently it's calculated once per zone in the zonelist. Signed-off-by:
-
Mel Gorman authored
A node/zone index is used to check if pages are compatible for merging but this happens unconditionally even if the buddy page is not free. Defer the calculation as long as possible. Ideally we would check the zone boundary but nodes can overlap. Signed-off-by:
-
Mel Gorman authored
If cpusets are not in use then we still check a global variable on every page allocation. Use jump labels to avoid the overhead. Signed-off-by:
-
Mel Gorman authored
This patch exposes the jump_label reference count in preparation for the next patch. cpusets cares about both the jump_label being enabled and how many users of the cpusets there currently are. Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Mel Gorman authored
If a zone cannot be used for a dirty page then it gets marked "full" which is cached in the zlc and later potentially skipped by allocation requests that have nothing to do with dirty zones. Signed-off-by:
-
Mel Gorman authored
The zlc is used on NUMA machines to quickly skip over zones that are full. However it is always updated, even for the first zone scanned when the zlc might not even be active. As it's a write to a bitmap that potentially bounces cache line it's deceptively expensive and most machines will not care. Only update the zlc if it was active. Signed-off-by:
-
Vladimir Davydov authored
Currently, on kmem_cache_destroy we delete the cache from the slab_list before __kmem_cache_shutdown, inserting it back to the list on failure. Initially, this was done, because we could release the slab_mutex in __kmem_cache_shutdown to delete sysfs slub entry, but since commit 41a21285 ("slub: use sysfs'es release mechanism for kmem_cache") we remove sysfs entry later in kmem_cache_destroy after dropping the slab_mutex, so that no implementation of __kmem_cache_shutdown can ever release the lock. Therefore we can simplify the code a bit by moving list_del after __kmem_cache_shutdown. Signed-off-by:
Vladimir Davydov <vdavydov@parallels.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
Vladimir Davydov authored
Current names are rather inconsistent. Let's try to improve them. Brief change log: ** old name ** ** new name ** kmem_cache_create_memcg memcg_create_kmem_cache memcg_kmem_create_cache memcg_regsiter_cache memcg_kmem_destroy_cache memcg_unregister_cache kmem_cache_destroy_memcg_children memcg_cleanup_cache_params mem_cgroup_destroy_all_caches memcg_unregister_all_caches create_work memcg_register_cache_work memcg_create_cache_work_func memcg_register_cache_func memcg_create_cache_enqueue memcg_schedule_register_cache Signed-off-by:
Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Andy Shevchenko authored
Instead of calling an additional routine in dmam_pool_destroy() rely on what dmam_pool_release() is doing. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Marc Carino authored
Some systems require a larger maximum PAGE_SIZE order for CMA allocations. To accommodate such systems, increase the upper-bound of the CMA_ALIGNMENT range to 12 (which ends up being 16MB on systems with 4K pages). Signed-off-by:
Marc Carino <marc.ceeeee@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Dan Streetman authored
Originally get_swap_page() started iterating through the singly-linked list of swap_info_structs using swap_list.next or highest_priority_index, which both were intended to point to the highest priority active swap target that was not full. The first patch in this series changed the singly-linked list to a doubly-linked list, and removed the logic to start at the highest priority non-full entry; it starts scanning at the highest priority entry each time, even if the entry is full. Replace the manually ordered swap_list_head with a plist, swap_active_head. Add a new plist, swap_avail_head. The original swap_active_head plist contains all active swap_info_structs, as before, while the new swap_avail_head plist contains only swap_info_structs that are active and available, i.e. not full. Add a new spinlock, swap_avail_lock, to protect the swap_avail_head list. Mel Gorman suggested using plists since they internally handle ordering the list entries based on priority, which is exactly what swap was doing manually. All the ordering code is now removed, and swap_info_struct entries and simply added to their corresponding plist and automatically ordered correctly. Using a new plist for available swap_info_structs simplifies and optimizes get_swap_page(), which no longer has to iterate over full swap_info_structs. Using a new spinlock for swap_avail_head plist allows each swap_info_struct to add or remove themselves from the plist when they become full or not-full; previously they could not do so because the swap_info_struct->lock is held when they change from full<->not-full, and the swap_lock protecting the main swap_active_head must be ordered before any swap_info_struct->lock. Signed-off-by:
Dan Streetman <ddstreet@ieee.org> Acked-by:
-
Dan Streetman authored
Add plist_requeue(), which moves the specified plist_node after all other same-priority plist_nodes in the list. This is essentially an optimized plist_del() followed by plist_add(). This is needed by swap, which (with the next patch in this set) uses a plist of available swap devices. When a swap device (either a swap partition or swap file) are added to the system with swapon(), the device is added to a plist, ordered by the swap device's priority. When swap needs to allocate a page from one of the swap devices, it takes the page from the first swap device on the plist, which is the highest priority swap device. The swap device is left in the plist until all its pages are used, and then removed from the plist when it becomes full. However, as described in man 2 swapon, swap must allocate pages from swap devices with the same priority in round-robin order; to do this, on each swap page allocation, swap uses a page from the first swap device in the plist, and then calls plist_requeue() to move that swap device entry to after any other same-priority swap devices. The next swap page allocation will again use a page from the first swap device in the plist and requeue it, and so on, resulting in round-robin usage of equal-priority swap devices. Also add plist_test_requeue() test function, for use by plist_test() to test plist_requeue() function. Signed-off-by:
-
Dan Streetman authored
Add PLIST_HEAD() to plist.h, equivalent to LIST_HEAD() from list.h, to define and initialize a struct plist_head. Add plist_for_each_continue() and plist_for_each_entry_continue(), equivalent to list_for_each_continue() and list_for_each_entry_continue(), to iterate over a plist continuing after the current position. Add plist_prev() and plist_next(), equivalent to (struct list_head*)->prev and ->next, implemented by list_prev_entry() and list_next_entry(), to access the prev/next struct plist_node entry. These are needed because unlike struct list_head, direct access of the prev/next struct plist_node isn't possible; the list must be navigated via the contained struct list_head. e.g. instead of accessing the prev by list_prev_entry(node, node_list) it can be accessed by plist_prev(node). Signed-off-by:
-
Dan Streetman authored
The logic controlling the singly-linked list of swap_info_struct entries for all active, i.e. swapon'ed, swap targets is rather complex, because: - it stores the entries in priority order - there is a pointer to the highest priority entry - there is a pointer to the highest priority not-full entry - there is a highest_priority_index variable set outside the swap_lock - swap entries of equal priority should be used equally this complexity leads to bugs such as: https://lkml.org/lkml/2014/2/13/181 where different priority swap targets are incorrectly used equally. That bug probably could be solved with the existing singly-linked lists, but I think it would only add more complexity to the already difficult to understand get_swap_page() swap_list iteration logic. The first patch changes from a singly-linked list to a doubly-linked list using list_heads; the highest_priority_index and related code are removed and get_swap_page() starts each iteration at the highest priority swap_info entry, even if it's full. While this does introduce unnecessary list iteration (i.e. Schlemiel the painter's algorithm) in the case where one or more of the highest priority entries are full, the iteration and manipulation code is much simpler and behaves correctly re: the above bug; and the fourth patch removes the unnecessary iteration. The second patch adds some minor plist helper functions; nothing new really, just functions to match existing regular list functions. These are used by the next two patches. The third patch adds plist_requeue(), which is used by get_swap_page() in the next patch - it performs the requeueing of same-priority entries (which moves the entry to the end of its priority in the plist), so that all equal-priority swap_info_structs get used equally. The fourth patch converts the main list into a plist, and adds a new plist that contains only swap_info entries that are both active and not full. As Mel suggested using plists allows removing all the ordering code from swap - plists handle ordering automatically. The list naming is also clarified now that there are two lists, with the original list changed from swap_list_head to swap_active_head and the new list named swap_avail_head. A new spinlock is also added for the new list, so swap_info entries can be added or removed from the new list immediately as they become full or not full. This patch (of 4): Replace the singly-linked list tracking active, i.e. swapon'ed, swap_info_struct entries with a doubly-linked list using struct list_heads. Simplify the logic iterating and manipulating the list of entries, especially get_swap_page(), by using standard list_head functions, and removing the highest priority iteration logic. The change fixes the bug: https://lkml.org/lkml/2014/2/13/181 in which different priority swap entries after the highest priority entry are incorrectly used equally in pairs. The swap behavior is now as advertised, i.e. different priority swap entries are used in order, and equal priority swap targets are used concurrently. Signed-off-by:
-
Jianyu Zhan authored
In previous commit(mm: use the light version __mod_zone_page_state in mlocked_vma_newpage()) a irq-unsafe __mod_zone_page_state is used. And as suggested by Andrew, to reduce the risks that new call sites incorrectly using mlocked_vma_newpage() without knowing they are adding racing, this patch folds mlocked_vma_newpage() into its only call site, page_add_new_anon_rmap, to make it open-cocded for people to know what is going on. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Jianyu Zhan <nasa4836@gmail.com> Suggested-by:
Hugh Dickins <hughd@google.com> Acked-by:
-
Jianyu Zhan authored
mlocked_vma_newpage() is called with pte lock held(a spinlock), which implies preemtion disabled, and the vm stat counter is not modified from interrupt context, so we need not use an irq-safe mod_zone_page_state() here, using a light-weight version __mod_zone_page_state() would be OK. This patch also documents __mod_zone_page_state() and some of its callsites. The comment above __mod_zone_page_state() is from Hugh Dickins, and acked by Christoph. Most credits to Hugh and Christoph for the clarification on the usage of the __mod_zone_page_state(). [akpm@linux-foundation.org: coding-style fixes] Suggested-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
-
Vlastimil Babka authored
The compaction free scanner in isolate_freepages() currently remembers PFN of the highest pageblock where it successfully isolates, to be used as the starting pageblock for the next invocation. The rationale behind this is that page migration might return free pages to the allocator when migration fails and we don't want to skip them if the compaction continues. Since migration now returns free pages back to compaction code where they can be reused, this is no longer a concern. This patch changes isolate_freepages() so that the PFN for restarting is updated with each pageblock where isolation is attempted. Using stress-highalloc from mmtests, this resulted in 10% reduction of the pages scanned by the free scanner. Note that the somewhat similar functionality that records highest successful pageblock in zone->compact_cached_free_pfn, remains unchanged. This cache is used when the whole compaction is restarted, not for multiple invocations of the free scanner during single compaction. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Reviewed-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Cc: Rik van Riel <riel@redhat.com> Acked-by:
-
Vlastimil Babka authored
During compaction, update_nr_listpages() has been used to count remaining non-migrated and free pages after a call to migrage_pages(). The freepages counting has become unneccessary, and it turns out that migratepages counting is also unnecessary in most cases. The only situation when it's needed to count cc->migratepages is when migrate_pages() returns with a negative error code. Otherwise, the non-negative return value is the number of pages that were not migrated, which is exactly the count of remaining pages in the cc->migratepages list. Furthermore, any non-zero count is only interesting for the tracepoint of mm_compaction_migratepages events, because after that all remaining unmigrated pages are put back and their count is set to 0. This patch therefore removes update_nr_listpages() completely, and changes the tracepoint definition so that the manual counting is done only when the tracepoint is enabled, and only when migrate_pages() returns a negative error code. Furthermore, migrate_pages() and the tracepoints won't be called when there's nothing to migrate. This potentially avoids some wasted cycles and reduces the volume of uninteresting mm_compaction_migratepages events where "nr_migrated=0 nr_failed=0". In the stress-highalloc mmtest, this was about 75% of the events. The mm_compaction_isolate_migratepages event is better for determining that nothing was isolated for migration, and this one was just duplicating the info. Signed-off-by:
-
David Rientjes authored
Async compaction terminates prematurely when need_resched(), see compact_checklock_irqsave(). This can never trigger, however, if the cond_resched() in isolate_migratepages_range() always takes care of the scheduling. If the cond_resched() actually triggers, then terminate this pageblock scan for async compaction as well. Signed-off-by:
-
David Rientjes authored
Synchronous memory compaction can be very expensive: it can iterate an enormous amount of memory without aborting, constantly rescheduling, waiting on page locks and lru_lock, etc, if a pageblock cannot be defragmented. Unfortunately, it's too expensive for transparent hugepage page faults and it's much better to simply fallback to pages. On 128GB machines, we find that synchronous memory compaction can take O(seconds) for a single thp fault. Now that async compaction remembers where it left off without strictly relying on sync compaction, this makes thp allocations best-effort without causing egregious latency during fault. We still need to retry async compaction after reclaim, but this won't stall for seconds. Signed-off-by:
-
David Rientjes authored
We're going to want to manipulate the migration mode for compaction in the page allocator, and currently compact_control's sync field is only a bool. Currently, we only do MIGRATE_ASYNC or MIGRATE_SYNC_LIGHT compaction depending on the value of this bool. Convert the bool to enum migrate_mode and pass the migration mode in directly. Later, we'll want to avoid MIGRATE_SYNC_LIGHT for thp allocations in the pagefault patch to avoid unnecessary latency. This also alters compaction triggered from sysfs, either for the entire system or for a node, to force MIGRATE_SYNC. [akpm@linux-foundation.org: fix build] [iamjoonsoo.kim@lge.com: use MIGRATE_SYNC in alloc_contig_range()] Signed-off-by:
-
David Rientjes authored
Each zone has a cached migration scanner pfn for memory compaction so that subsequent calls to memory compaction can start where the previous call left off. Currently, the compaction migration scanner only updates the per-zone cached pfn when pageblocks were not skipped for async compaction. This creates a dependency on calling sync compaction to avoid having subsequent calls to async compaction from scanning an enormous amount of non-MOVABLE pageblocks each time it is called. On large machines, this could be potentially very expensive. This patch adds a per-zone cached migration scanner pfn only for async compaction. It is updated everytime a pageblock has been scanned in its entirety and when no pages from it were successfully isolated. The cached migration scanner pfn for sync compaction is updated only when called for sync compaction. Signed-off-by:
-
David Rientjes authored
Greg reported that he found isolated free pages were returned back to the VM rather than the compaction freelist. This will cause holes behind the free scanner and cause it to reallocate additional memory if necessary later. He detected the problem at runtime seeing that ext4 metadata pages (esp the ones read by "sbi->s_group_desc[i] = sb_bread(sb, block)") were constantly visited by compaction calls of migrate_pages(). These pages had a non-zero b_count which caused fallback_migrate_page() -> try_to_release_page() -> try_to_free_buffers() to fail. Memory compaction works by having a "freeing scanner" scan from one end of a zone which isolates pages as migration targets while another "migrating scanner" scans from the other end of the same zone which isolates pages for migration. When page migration fails for an isolated page, the target page is returned to the system rather than the freelist built by the freeing scanner. This may require the freeing scanner to continue scanning memory after suitable migration targets have already been returned to the system needlessly. This patch returns destination pages to the freeing scanner freelist when page migration fails. This prevents unnecessary work done by the freeing scanner but also encourages memory to be as compacted as possible at the end of the zone. Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
-
David Rientjes authored
Memory migration uses a callback defined by the caller to determine how to allocate destination pages. When migration fails for a source page, however, it frees the destination page back to the system. This patch adds a memory migration callback defined by the caller to determine how to free destination pages. If a caller, such as memory compaction, builds its own freelist for migration targets, this can reuse already freed memory instead of scanning additional memory. If the caller provides a function to handle freeing of destination pages, it is called when page migration fails. If the caller passes NULL then freeing back to the system will be handled as usual. This patch introduces no functional change. Signed-off-by:
-
Vladimir Davydov authored
It isn't worth complicating the code by allocating it on the first access, because it only takes 256 bytes. Signed-off-by:
-
Vladimir Davydov authored
Instead of calling back to memcontrol.c from kmem_cache_create_memcg in order to just create the name of a per memcg cache, let's allocate it in place. We only need to pass the memcg name to kmem_cache_create_memcg for that - everything else can be done in slab_common.c. Signed-off-by:
-
Qiang Huang authored
Signed-off-by:
Qiang Huang <h.huangqiang@huawei.com> Acked-by:
-
Qiang Huang authored
It is only used in __mem_cgroup_begin_update_page_stat(), the name is confusing and 2 routines for one thing also confuse people, so fold this function seems more clear. [akpm@linux-foundation.org: fix typo, per Michal] Signed-off-by:
-
Kirill A. Shutemov authored
With ELF extended numbering 16-bit bound is not hard limit any more. [akpm@linux-foundation.org: fix typo] Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Emil Medve authored
Signed-off-by:
Emil Medve <Emilian.Medve@Freescale.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Fabian Frederick authored
Also fixes kernel-doc warning Signed-off-by:
Fabian Frederick <fabf@skynet.be> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Kirill A. Shutemov authored
KSM was converted to use rmap_walk() and now nobody uses these functions outside mm/rmap.c. Let's covert them back to static. Signed-off-by:
-
Cyrill Gorcunov authored
Tracking dirty status on 2 level pages requires very ugly macros and taking into account how old the machines who can operate without PAE mode only are, lets drop soft dirty tracker from them for code simplicity (note I can't drop all the macros from 2 level pages by now since _PAGE_BIT_PROTNONE and _PAGE_BIT_FILE are still used even without tracker). Linus proposed to completely rip off softdirty support on x86-32 (even with PAE) and since for CRIU we're not planning to support native x86-32 mode, lets do that. (Softdirty tracker is relatively new feature which is mostly used by CRIU so I don't expect if such API change would cause problems for userspace). Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
