- 23 Sep, 2020 4 commits
-
-
Mike Snitzer authored
It is possible, albeit more unlikely, for a block device to have a non power-of-2 for chunk_sectors (e.g. 10+2 RAID6 with 128K chunk_sectors, which results in a full-stripe size of 1280K. This causes the RAID6's io_opt to be advertised as 1280K, and a stacked device _could_ then be made to use a blocksize, aka chunk_sectors, that matches non power-of-2 io_opt of underlying RAID6 -- resulting in stacked device's chunk_sectors being a non power-of-2). Update blk_queue_chunk_sectors() and blk_max_size_offset() to accommodate drivers that need a non power-of-2 chunk_sectors. Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Mike Snitzer authored
Like 'io_opt', blk_stack_limits() should stack 'chunk_sectors' using lcm_not_zero() rather than min_not_zero() -- otherwise the final 'chunk_sectors' could result in sub-optimal alignment of IO to component devices in the IO stack. Also, if 'chunk_sectors' isn't a multiple of 'physical_block_size' then it is a bug in the driver and the device should be flagged as 'misaligned'. Reviewed-by:
-
Christoph Hellwig authored
bmd is allocated using kmalloc in bio_alloc_map_data, so make sure is_null_mapped is properly initialized to false for the !null_mapped case. Fixes: f3256075 ("block: remove the BIO_NULL_MAPPED flag") Reported-by:
Marc Hartmayer <mhartmay@linux.ibm.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Julia Lawall authored
sg_init_table zeroes its first argument, so the allocation of that argument doesn't have to. the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ x = - kzalloc + kmalloc (...) ... sg_init_table(x,...) // </smpl> Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
- 15 Sep, 2020 5 commits
-
-
Baolin Wang authored
Do not need check the bps or iops limitation if bps or iops is unlimited. Signed-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Signed-off-by:
-
Baolin Wang authored
The tg_may_dispatch() will call tg_with_in_bps_limit() and tg_with_in_iops_limit() to check if we can dispatch a bio or not, which will calculate bps/iops limitation multiple times. But tg_may_dispatch() is always called under queue lock, which means the bps/iops limitation will not change in tg_may_dispatch(). So we can calculate the bps/iops limitation only once, and pass them to tg_with_in_bps_limit() and tg_with_in_iops_limit() to avoid calculating bps/iops limitation repeatedly. Signed-off-by:
-
Baolin Wang authored
The 'throtl_grp_quantum' and 'throtl_quantum' are both read-only variables, thus better to use readable macros instead of static variables, which can also save some spaces for .bss area. Signed-off-by:
-
Baolin Wang authored
Use readable READ/WRITE macros instead of magic numbers. Signed-off-by:
-
Baolin Wang authored
Fix some comments' typos. Signed-off-by:
-
- 14 Sep, 2020 1 commit
-
-
Tejun Heo authored
adjust_inuse_and_calc_cost() is responsible for reducing the amount of donated weights dynamically in period as the budget runs low. Because we don't want to do full donation calculation in period, we keep latching up inuse by INUSE_ADJ_STEP_PCT of the active weight of the cgroup until the resulting hweight_inuse is satisfactory. Unfortunately, the adj_step calculation was reading the active weight before acquiring ioc->lock. Because the current thread could have lost race to activate the iocg to another thread before entering this function, it may read the active weight as zero before acquiring ioc->lock. When this happens, the adj_step is calculated as zero and the incremental adjustment loop becomes an infinite one. Fix it by fetching the active weight after acquiring ioc->lock. Fixes: b0853ab4 ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
- 11 Sep, 2020 6 commits
-
-
Tejun Heo authored
Conceptually, root_iocg->hweight_donating must be less than WEIGHT_ONE but all hweight calculations round up and thus it may end up >= WEIGHT_ONE triggering divide-by-zero and other issues. Bound the value to avoid surprises. Fixes: e08d02aa ("blk-iocost: implement Andy's method for donation weight updates") Signed-off-by:
-
Song Liu authored
This enables proper statistics in /proc/diskstats for bcache partitions. Signed-off-by:
Song Liu <songliubraving@fb.com> Reviewed-by:
Coly Li <colyli@suse.de> Reviewed-by:
-
Song Liu authored
This enables proper statistics in /proc/diskstats for md partitions. Signed-off-by:
-
Song Liu authored
These functions can be used to enable iostat for partitions on devices like md, bcache. Signed-off-by:
-
Ming Lei authored
NVMe shares tagset between fabric queue and admin queue or between connect_q and NS queue, so hctx_may_queue() can be called to allocate request for these queues. Tags can be reserved in these tagset. Before error recovery, there is often lots of in-flight requests which can't be completed, and new reserved request may be needed in error recovery path. However, hctx_may_queue() can always return false because there is too many in-flight requests which can't be completed during error handling. Finally, nothing can proceed. Fix this issue by always allowing reserved tag allocation in hctx_may_queue(). This is reasonable because reserved tags are supposed to always be available. Reviewed-by:
Hannes Reinecke <hare@suse.de> Cc: David Milburn <dmilburn@redhat.com> Cc: Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Tian Tao authored
scsi/sg.h is included more than once, Remove the one that isn't necessary. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Signed-off-by:
-
- 10 Sep, 2020 20 commits
-
-
Xianting Tian authored
The test and the explaination of the patch as bellow. Before test we added more debug code in blkg_async_bio_workfn(): int count = 0 if (bios.head && bios.head->bi_next) { need_plug = true; blk_start_plug(&plug); } while ((bio = bio_list_pop(&bios))) { /*io_punt is a sysctl user interface to control the print*/ if(io_punt) { printk("[%s:%d] bio start,size:%llu,%d count=%d plug?%d\n", current->comm, current->pid, bio->bi_iter.bi_sector, (bio->bi_iter.bi_size)>>9, count++, need_plug); } submit_bio(bio); } if (need_plug) blk_finish_plug(&plug); Steps that need to be set to trigger *PUNT* io before testing: mount -t btrfs -o compress=lzo /dev/sda6 /btrfs mount -t cgroup2 nodev /cgroup2 mkdir /cgroup2/cg3 echo "+io" > /cgroup2/cgroup.subtree_control echo "8:0 wbps=1048576000" > /cgroup2/cg3/io.max #1000M/s echo $$ > /cgroup2/cg3/cgroup.procs Then use dd command to test btrfs PUNT io in current shell: dd if=/dev/zero of=/btrfs/file bs=64K count=100000 Test hardware environment as below: [root@localhost btrfs]# lscpu Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 32 On-line CPU(s) list: 0-31 Thread(s) per core: 2 Core(s) per socket: 8 Socket(s): 2 NUMA node(s): 2 Vendor ID: GenuineIntel With above debug code, test command and test environment, I did the tests under 3 different system loads, which are triggered by stress: 1, Run 64 threads by command "stress -c 64 &" [53615.975974] [kworker/u66:18:1490] bio start,size:45583056,8 count=0 plug?1 [53615.975980] [kworker/u66:18:1490] bio start,size:45583064,8 count=1 plug?1 [53615.975984] [kworker/u66:18:1490] bio start,size:45583072,8 count=2 plug?1 [53615.975987] [kworker/u66:18:1490] bio start,size:45583080,8 count=3 plug?1 [53615.975990] [kworker/u66:18:1490] bio start,size:45583088,8 count=4 plug?1 [53615.975993] [kworker/u66:18:1490] bio start,size:45583096,8 count=5 plug?1 ... ... [53615.977041] [kworker/u66:18:1490] bio start,size:45585480,8 count=303 plug?1 [53615.977044] [kworker/u66:18:1490] bio start,size:45585488,8 count=304 plug?1 [53615.977047] [kworker/u66:18:1490] bio start,size:45585496,8 count=305 plug?1 [53615.977050] [kworker/u66:18:1490] bio start,size:45585504,8 count=306 plug?1 [53615.977053] [kworker/u66:18:1490] bio start,size:45585512,8 count=307 plug?1 [53615.977056] [kworker/u66:18:1490] bio start,size:45585520,8 count=308 plug?1 [53615.977058] [kworker/u66:18:1490] bio start,size:45585528,8 count=309 plug?1 2, Run 32 threads by command "stress -c 32 &" [50586.290521] [kworker/u66:6:32351] bio start,size:45806496,8 count=0 plug?1 [50586.290526] [kworker/u66:6:32351] bio start,size:45806504,8 count=1 plug?1 [50586.290529] [kworker/u66:6:32351] bio start,size:45806512,8 count=2 plug?1 [50586.290531] [kworker/u66:6:32351] bio start,size:45806520,8 count=3 plug?1 [50586.290533] [kworker/u66:6:32351] bio start,size:45806528,8 count=4 plug?1 [50586.290535] [kworker/u66:6:32351] bio start,size:45806536,8 count=5 plug?1 ... ... [50586.299640] [kworker/u66:5:32350] bio start,size:45808576,8 count=252 plug?1 [50586.299643] [kworker/u66:5:32350] bio start,size:45808584,8 count=253 plug?1 [50586.299646] [kworker/u66:5:32350] bio start,size:45808592,8 count=254 plug?1 [50586.299649] [kworker/u66:5:32350] bio start,size:45808600,8 count=255 plug?1 [50586.299652] [kworker/u66:5:32350] bio start,size:45808608,8 count=256 plug?1 [50586.299663] [kworker/u66:5:32350] bio start,size:45808616,8 count=257 plug?1 [50586.299665] [kworker/u66:5:32350] bio start,size:45808624,8 count=258 plug?1 [50586.299668] [kworker/u66:5:32350] bio start,size:45808632,8 count=259 plug?1 3, Don't run thread by stress [50861.355246] [kworker/u66:19:32376] bio start,size:13544504,8 count=0 plug?0 [50861.355288] [kworker/u66:19:32376] bio start,size:13544512,8 count=0 plug?0 [50861.355322] [kworker/u66:19:32376] bio start,size:13544520,8 count=0 plug?0 [50861.355353] [kworker/u66:19:32376] bio start,size:13544528,8 count=0 plug?0 [50861.355392] [kworker/u66:19:32376] bio start,size:13544536,8 count=0 plug?0 [50861.355431] [kworker/u66:19:32376] bio start,size:13544544,8 count=0 plug?0 [50861.355468] [kworker/u66:19:32376] bio start,size:13544552,8 count=0 plug?0 [50861.355499] [kworker/u66:19:32376] bio start,size:13544560,8 count=0 plug?0 [50861.355532] [kworker/u66:19:32376] bio start,size:13544568,8 count=0 plug?0 [50861.355575] [kworker/u66:19:32376] bio start,size:13544576,8 count=0 plug?0 [50861.355618] [kworker/u66:19:32376] bio start,size:13544584,8 count=0 plug?0 [50861.355659] [kworker/u66:19:32376] bio start,size:13544592,8 count=0 plug?0 [50861.355740] [kworker/u66:0:32346] bio start,size:13544600,8 count=0 plug?1 [50861.355748] [kworker/u66:0:32346] bio start,size:13544608,8 count=1 plug?1 [50861.355962] [kworker/u66:2:32347] bio start,size:13544616,8 count=0 plug?0 [50861.356272] [kworker/u66:7:31962] bio start,size:13544624,8 count=0 plug?0 [50861.356446] [kworker/u66:7:31962] bio start,size:13544632,8 count=0 plug?0 [50861.356567] [kworker/u66:7:31962] bio start,size:13544640,8 count=0 plug?0 [50861.356707] [kworker/u66:19:32376] bio start,size:13544648,8 count=0 plug?0 [50861.356748] [kworker/u66:15:32355] bio start,size:13544656,8 count=0 plug?0 [50861.356825] [kworker/u66:17:31970] bio start,size:13544664,8 count=0 plug?0 Analysis of above 3 test results with different system load: >From above test, we can see more and more continuous bios can be plugged with system load increasing. When run "stress -c 64 &", 310 continuous bios are plugged; When run "stress -c 32 &", 260 continuous bios are plugged; When don't run stress, at most only 2 continuous bios are plugged, in most cases, bio_list only contains one single bio. How to explain above phenomenon: We know, in submit_bio(), if the bio is a REQ_CGROUP_PUNT io, it will queue a work to workqueue blkcg_punt_bio_wq. But when the workqueue is scheduled, it depends on the system load. When system load is low, the workqueue will be quickly scheduled, and the bio in bio_list will be quickly processed in blkg_async_bio_workfn(), so there is less chance that the same io submit thread can add multiple continuous bios to bio_list before workqueue is scheduled to run. The analysis aligned with above test "3". When system load is high, there is some delay before the workqueue can be scheduled to run, the higher the system load the greater the delay. So there is more chance that the same io submit thread can add multiple continuous bios to bio_list. Then when the workqueue is scheduled to run, there are more continuous bios in bio_list, which will be processed in blkg_async_bio_workfn(). The analysis aligned with above test "1" and "2". According to test, we can get io performance improved with the patch, especially when system load is higher. Another optimazition is to use the plug only when bio_list contains at least 2 bios. Signed-off-by:Xianting Tian <tian.xianting@h3c.com> Signed-off-by:
-
Christoph Hellwig authored
Remove the now unused check_disk_change helper. Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by:
-
Christoph Hellwig authored
Both callers have a valid CD struture available, so rely on that instead of getting another reference. Also move the function to avoid a forward declaration. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call sr_block_revalidate_disk manually. Also add an explicit call to sr_block_revalidate_disk just before disk_add() to ensure we always read check for a ready unit and read the TOC and then stop wiring up ->revalidate_disk. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call sd_revalidate_disk manually. As sd also calls sd_revalidate_disk manually during probe and open, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
The md driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by:
Song Liu <song@kernel.org> Signed-off-by:
-
Christoph Hellwig authored
ide-gd is only using the disk events mechanism to be able to force an invalidation and partition scan on opening removable media. Just open code the logic without invoving the block layer. Signed-off-by:
-
Christoph Hellwig authored
Just merge the trivial function into its only caller. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_changed instead of check_disk_change and call idecd_revalidate_disk manually. Given that idecd_revalidate_disk only re-reads the TOC, and we already do the same at probe time, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
The Sega GD-ROM driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by:
-
Christoph Hellwig authored
The pcd driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by:
-
Christoph Hellwig authored
Pass a struct ace_device to ace_revalidate_disk, move the media changed check into the one caller that needs it, and give the routine a better name. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call ace_revalidate_disk manually. Given that ace_revalidate_disk only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_changed instead of check_disk_change and call floppy_revalidate manually. Given that floppy_revalidate only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
floppy_revalidate mostly duplicates work already done in floppy_open despite only beeing called from floppy_open. Remove the function and just clear the ->ejected flag directly under the right condition. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call floppy_revalidate manually. Given that floppy_revalidate only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call floppy_revalidate manually. Given that floppy_revalidate only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
Switch to use bdev_check_media_change instead of check_disk_change and call floppy_revalidate manually. Given that floppy_revalidate only deals with media change events, the extra call into ->revalidate_disk from bdev_disk_changed is not required either, so stop wiring up the method. Signed-off-by:
-
Christoph Hellwig authored
The Amiga floppy driver does not have a ->revalidate_disk method, so it can just use bdev_check_media_change without any additional changes. Signed-off-by:
-
Christoph Hellwig authored
Like check_disk_changed, except that it does not call ->revalidate_disk but leaves that to the caller. Signed-off-by:
-
- 08 Sep, 2020 4 commits
-
-
Christoph Hellwig authored
Switch to the naming used by the other entries so that we can use the QUEUE_RW_ENTRY helper. Signed-off-by:
-
Christoph Hellwig authored
Add two helpers macros to avoid boilerplate code for the queue sysfs entries. Signed-off-by:
-
Wang Hai authored
The sparse tool complains as follows: kernel/trace/blktrace.c:796:5: warning: symbol 'blk_trace_bio_get_cgid' was not declared. Should it be static? This function is not used outside of blktrace.c, so this commit marks it static. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Baolin Wang authored
Now we usually free the hctx->sched_data by e->type->ops.exit_hctx(), and no users will use blk_mq_sched_free_hctx_data() function. Remove it. Signed-off-by:
-
