- 04 Dec, 2018 15 commits
-
-
Tvrtko Ursulin authored
For selftests like live_hangcheck, which does thousands of reset per second, it is too verbose to log every time we re-apply the workarounds. Remove those messages since, coupled with the dedicated selftest, it is sufficient to only log the number of recorded workarounds at init time. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
Impose a restraint that we have all vma pinned for a request prior to its allocation. This is to simplify request construction, and should facilitate unravelling the lock interdependencies later. Signed-off-by:
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
Commit 2ca711ca ("drm/i915/icl: Consider DSI for getting transcoder state") clobbers the previously read TRANS_DDI_FUNC_CTL_EDP register contents with TRANS_DDI_FUNC_CTL_DSI0 contents. Fix the state readout, and handle DSI 1 while at it. Use a bitmask for iterating and logging transcoders, because the allowed combinations are a bit funky. Fixes: 2ca711ca ("drm/i915/icl: Consider DSI for getting transcoder state") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108928 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Chris Wilson authored
Currently we allocate a scratch page for each engine, but since we only ever write into it for post-sync operations, it is not exposed to userspace nor do we care for coherency. As we then do not care about its contents, we can use one page for all, reducing our allocations and avoid complications by not assuming per-engine isolation. For later use, it simplifies engine initialisation (by removing the allocation that required struct_mutex!) and means that we can always rely on there being a scratch page. v2: Check that we allocated a large enough scratch for I830 w/a Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850Signed-off-by:Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: <stable@vger.kernel.org> # v4.18.20+
-
Tvrtko Ursulin authored
The new workaround list allocator grows the list in chunks so will end up with some unused space. Trim it when the initialization phase is done to free up a tiny bit of slab. v2: * Simplify with kmemdup. (Chris Wilson) v3: * Refactor for __size removal. Signed-off-by:
-
Tvrtko Ursulin authored
Convert the per context workaround handling code to run against the newly introduced common workaround framework and fuse the two to use the existing smarter list add helper, the one which does the sorted insert and merges registers where possible. This completes migration of all four classes of workarounds onto the common framework. Existing macros are kept untouched for smaller code churn. v2: * Rename to list name ctx_wa_list and move from dev_priv to engine. v3: * API rename and parameters tweaking. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Instead of having a separate list of white-listed registers we can trivially move this to the common workarounds framework. This brings us one step closer to the goal of driving all workaround classes using the same code. v2: * Use GEM_DEBUG_WARN_ON for the sanity check. (Chris Wilson) v3: * API rename. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Two simple selftests which test that both GT and engine workarounds are not lost after either a full GPU reset, or after the per-engine ones. (Including checks that one engine reset is not affecting workarounds not belonging to itself.) v2: * Rebase for series refactoring. * Add spinner for actual engine reset! * Add idle reset test as well. (Chris Wilson) * Share existing global_reset_lock. (Chris Wilson) v3: * intel_engine_verify_workarounds can be static. * API rename. (Chris Wilson) * Move global reset lock out of the loop. (Chris Wilson) v4: * Add missing rpm puts. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Since we now have all the GT workarounds in a table, by adding a simple shared helper function we can now verify that their values are still applied after some interesting events in the lifetime of the driver. Initially we only do this after GPU initialization. v2: Chris Wilson: * Simplify verification by realizing it's a simple xor and and. * Remove verification from engine reset path. * Return bool straight away from the verify API. v3: * API rename. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
We stopped re-applying the GT workarounds after engine reset since commit 59b449d5 ("drm/i915: Split out functions for different kinds of workarounds"). Issue with this is that some of the GT workarounds live in the MMIO space which gets lost during engine resets. So far the registers in 0x2xxx and 0xbxxx address range have been identified to be affected. This losing of applied workarounds has obvious negative effects and can even lead to hard system hangs (see the linked Bugzilla). Rather than just restoring this re-application, because we have also observed that it is not safe to just re-write all GT workarounds after engine resets (GPU might be live and weird hardware states can happen), we introduce a new class of per-engine workarounds and move only the affected GT workarounds over. Using the framework introduced in the previous patch, we therefore after engine reset, re-apply only the workarounds living in the affected MMIO address ranges. v2: * Move Wa_1406609255:icl to engine workarounds as well. * Rename API. (Chris Wilson) * Drop redundant IS_KABYLAKE. (Chris Wilson) * Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
To enable later verification of GT workaround state at various stages of driver lifetime, we record the list of applicable ones per platforms to a list, from which they are also applied. The added data structure is a simple array of register, mask and value items, which is allocated on demand as workarounds are added to the list. This is a temporary implementation which later in the series gets fused with the existing per context workaround list handling. It is separated at this stage since the following patch fixes a bug which needs to be as easy to backport as possible. Also, since in the following patch we will be adding a new class of workarounds (per engine) which can be applied from interrupt context, we straight away make the provision for safe read-modify-write cycle. v2: * Change dev_priv to i915 along the init path. (Chris Wilson) * API rename. (Chris Wilson) v3: * Remove explicit list size tracking in favour of growing the allocation in power of two chunks. (Chris Wilson) v4: Chris Wilson: * Change wa_list_finish to early return. * Copy workarounds using the compiler for static checking. * Do not bother zeroing unused entries. * Re-order struct i915_wa_list. v5: * kmalloc_array. * Whitespace cleanup. Signed-off-by:
-
Jonathan Gray authored
Change the license of the i915_sw_fence files to MIT matching most of the other i915 files. This makes it possible to use them in a new port of i915 to OpenBSD. Besides some mechanical tree wide changes Chris Wilson is the sole author of these files with Intel holding the copyright. Intel's legal team have given permission to change the license according to Joonas Lahtinen. v2: expand commit message and note permission from Intel legal Signed-off-by:
Jonathan Gray <jsg@jsg.id.au> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
We inspect the requests under the assumption that they will be marked as completed when they are removed from the queue. Currently however, in the process of wedging the requests will be removed from the queue before they are completed, so rearrange the code to complete the fences before the locks are dropped. <1>[ 354.473346] BUG: unable to handle kernel NULL pointer dereference at 0000000000000250 <6>[ 354.473363] PGD 0 P4D 0 <4>[ 354.473370] Oops: 0000 [#1] PREEMPT SMP PTI <4>[ 354.473380] CPU: 0 PID: 4470 Comm: gem_eio Tainted: G U 4.20.0-rc4-CI-CI_DRM_5216+ #1 <4>[ 354.473393] Hardware name: Intel Corporation NUC7CJYH/NUC7JYB, BIOS JYGLKCPX.86A.0027.2018.0125.1347 01/25/2018 <4>[ 354.473480] RIP: 0010:__i915_schedule+0x311/0x5e0 [i915] <4>[ 354.473490] Code: 49 89 44 24 20 4d 89 4c 24 28 4d 89 29 44 39 b3 a0 04 00 00 7d 3a 41 8b 44 24 78 85 c0 74 13 48 8b 93 78 04 00 00 48 83 e2 fc <39> 82 50 02 00 00 79 1e 44 89 b3 a0 04 00 00 48 8d bb d0 03 00 00 <4>[ 354.473515] RSP: 0018:ffffc900001bba90 EFLAGS: 00010046 <4>[ 354.473524] RAX: 0000000000000003 RBX: ffff8882624c8008 RCX: f34a737800000000 <4>[ 354.473535] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8882624c8048 <4>[ 354.473545] RBP: ffffc900001bbab0 R08: 000000005963f1f1 R09: 0000000000000000 <4>[ 354.473556] R10: ffffc900001bba10 R11: ffff8882624c8060 R12: ffff88824fdd7b98 <4>[ 354.473567] R13: ffff88824fdd7bb8 R14: 0000000000000001 R15: ffff88824fdd7750 <4>[ 354.473578] FS: 00007f44b4b5b980(0000) GS:ffff888277e00000(0000) knlGS:0000000000000000 <4>[ 354.473590] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 354.473599] CR2: 0000000000000250 CR3: 000000026976e000 CR4: 0000000000340ef0 <4>[ 354.473611] Call Trace: <4>[ 354.473622] ? lock_acquire+0xa6/0x1c0 <4>[ 354.473677] ? i915_schedule_bump_priority+0x57/0xd0 [i915] <4>[ 354.473736] i915_schedule_bump_priority+0x72/0xd0 [i915] <4>[ 354.473792] i915_request_wait+0x4db/0x840 [i915] <4>[ 354.473804] ? get_pwq.isra.4+0x2c/0x50 <4>[ 354.473813] ? ___preempt_schedule+0x16/0x18 <4>[ 354.473824] ? wake_up_q+0x70/0x70 <4>[ 354.473831] ? wake_up_q+0x70/0x70 <4>[ 354.473882] ? gen6_rps_boost+0x118/0x120 [i915] <4>[ 354.473936] i915_gem_object_wait_fence+0x8a/0x110 [i915] <4>[ 354.473991] i915_gem_object_wait+0x113/0x500 [i915] <4>[ 354.474047] i915_gem_wait_ioctl+0x11c/0x2f0 [i915] <4>[ 354.474101] ? i915_gem_unset_wedged+0x210/0x210 [i915] <4>[ 354.474113] drm_ioctl_kernel+0x81/0xf0 <4>[ 354.474123] drm_ioctl+0x2de/0x390 <4>[ 354.474175] ? i915_gem_unset_wedged+0x210/0x210 [i915] <4>[ 354.474187] ? finish_task_switch+0x95/0x260 <4>[ 354.474197] ? lock_acquire+0xa6/0x1c0 <4>[ 354.474207] do_vfs_ioctl+0xa0/0x6e0 <4>[ 354.474217] ? __fget+0xfc/0x1e0 <4>[ 354.474225] ksys_ioctl+0x35/0x60 <4>[ 354.474233] __x64_sys_ioctl+0x11/0x20 <4>[ 354.474241] do_syscall_64+0x55/0x190 <4>[ 354.474251] entry_SYSCALL_64_after_hwframe+0x49/0xbe <4>[ 354.474260] RIP: 0033:0x7f44b3de65d7 <4>[ 354.474267] Code: b3 66 90 48 8b 05 b1 48 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 81 48 2d 00 f7 d8 64 89 01 48 <4>[ 354.474293] RSP: 002b:00007fff974948e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 <4>[ 354.474305] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f44b3de65d7 <4>[ 354.474316] RDX: 00007fff97494940 RSI: 00000000c010646c RDI: 0000000000000007 <4>[ 354.474327] RBP: 00007fff97494940 R08: 0000000000000000 R09: 00007f44b40bbc40 <4>[ 354.474337] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c010646c <4>[ 354.474348] R13: 0000000000000007 R14: 0000000000000000 R15: 0000000000000000 v2: Avoid floating requests. v3: Can't call dma_fence_signal() under the timeline lock! v4: Can't call dma_fence_signal() from inside another fence either. Signed-off-by:
-
Chris Wilson authored
Always show the FEC capability as it is initialised to 0 before error. Fixing, drivers/gpu/drm/i915/intel_dp.c:3846 intel_dp_get_dsc_sink_cap() warn: inconsistent indenting Fixes: 08cadae8 ("i915/dp/fec: Cache the FEC_CAPABLE DPCD register") Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181120202439.13017-2-chris@chris-wilson.co.uk
-
- 03 Dec, 2018 25 commits
-
-
José Roberto de Souza authored
This helps separate what capabilities are display capabilities. v3: Moving display struct right after flags (Lucas) Cc: Jani Nikula <jani.nikula@linux.intel.com> Suggested-by:
Jani Nikula <jani.nikula@linux.intel.com> Suggested-by:
Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181130232048.14216-2-jose.souza@intel.com
-
José Roberto de Souza authored
Right now it is decided if GEN has display by checking the num_pipes, so lets make it explicit and use a macro. Cc: Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Manasi Navare authored
Fix the intel_link_compute_m_n in case of display stream compression. This patch passes the compressed_bpp to intel_link_compute_m_n if compression is enabled. Fixes: a4a15777 ("drm/i915/dp: Compute DSC pipe config in atomic check") Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181201010412.32372-1-manasi.d.navare@intel.com
-
Jani Nikula authored
They don't need to be modified. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Reviewed-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Jani Nikula authored
Let the passed in array be const (and thus placed in rodata) instead of a mutable array of const pointers. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Chris Wilson authored
Since commit fd8526e5 ("drm/i915/execlists: Trust the CSB") we actually broke the force-mmio mode for our execlists implementation. No one noticed, so ergo no one is actually using an old vGPU host (where we required the older method) and so can simply remove the broken support. v2: csb_read can go as well (Mika) Reported-by:
-
Chris Wilson authored
Change the on-cpu check to on-runqueue to catch if the waiter has been woken (and reset its current_state back to TASK_UNINTERRUPTIBLE to perform the seqno check) but is sleeping due to being preempted off the cpu. Signed-off-by:
-
Jani Nikula authored
Add encoder specific pll mapping for DSI. The differences with the DDI version are big enough to warrant a separate function. v2: add posting read (Madhav) Cc: Madhav Chauhan <madhav.chauhan@intel.com> Cc: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
Madhav Chauhan <madhav.chauhan@intel.com> Signed-off-by:
-
Madhav Chauhan authored
Ungate the clocks on the selected port. Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Signed-off-by:
-
Madhav Chauhan authored
As per BSPEC, depending on the DSI transcoder being used, DDI clock for the associated port should be gated. This patch does the same. Signed-off-by:
-
Jani Nikula authored
Add dummy debug logging GPIO element execution function for ICL. Reviewed-by:
-
Madhav Chauhan authored
Display Pins are the only GPIOs that need to be used by driver for DSI panels. So driver should now have its own implementation to toggle these pins based on GPIO info received from VBT sequences. Signed-off-by:
-
Madhav Chauhan authored
There are two panel power sequencers. Each register has two addressable instances. This patch defines both the instances of Panel power control register Signed-off-by:
-
Madhav Chauhan authored
This patch define missing bitfield for shortplug ctl ddi register which will be used for ICL DSI GPIO programming. Signed-off-by:
-
Madhav Chauhan authored
Transcoder timings for Gen11 DSI encoder is available at pipe level unlike in older platform where port specific registers need to be accessed. v2 by Jani: - get timings for (!dsi || icl) instead of (dsi && icl). Signed-off-by:
-
Madhav Chauhan authored
For Gen11 DSI, we use similar registers like for eDP to find if DSI encoder is connected or not to a pipe. This patch refactors existing hsw_get_transcoder_state() to handle this. v2 by Jani: - Add WARN_ON(dsi && edp) (Ville) Signed-off-by:
-
Madhav Chauhan authored
This patch configures DSI video mode dual link by programming DSS_CTL registers. v2: Use new bitfield definitions from Anusha's patch Correct register to be programmed and use max depth buffer value (James) v3 by Jani: - checkpatch fixes Signed-off-by: -
Madhav Chauhan authored
This patch implements compute config for Gen11 DSI encoder which is required at the time of modeset. For DSI 8X clock is AFE clock which is 5 times port clock. v2 by Jani: - drop the enable nop hook - fixed_mode is always true - HAS_GMCH_DISPLAY() is always false v3 by Jani: - set encoder->compute_config dropped during rebase v4 by Jani: - squash Vandita's port clock patch - remove todo comment Co-developed-by:
-
Madhav Chauhan authored
This patch read out the current hw state for DSI and return true if encoder is active. v2 by Jani: - Squash connector get hw state hook here - Squash encode get hw state fix here v3 by Jani: - Add encoder->get_power_domains() (Imre) v4 by Jani: - Make encoder->get_power_domains() sensible... (Imre) v5 by Jani: - Power domains are bit positions, not bits (Stan, Imre) Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Vandita Kulkarni authored
This patch implements the functionality for getting PIPE configuration to which DSI encoder is connected. Use the same method to get port clock like other DDI encoders. Used during the atomic modeset. v2 by Jani: - Squash Madhav's and Vandita's get config bits together - Move cnl_calc_wrpll_link() to intel_drv.h - Drop extra temp variables - Use enc_to_intel_dsi() instead of open coding Co-developed-by:
-
Madhav Chauhan authored
Allocate DSI host structure for each DSI port available on gen11 and register them with DSI fwk of DRM. Some of the DSI host operations are also registered as part of this. Retrieves DSI pkt (from DSI msg) to be sent over DSI link using DRM DSI exported functions. A wrapper function is also added as "DSI host transfer" for sending DSI data/cmd. Add DSI packet payload to command payload queue using credit based mechanism for *long* packets. v2 by Jani: - indentation - Use the new credit available helper - Use int for free_credits - Add intel_dsi local variable for better code flow - Use the new credit available helper - Use int for free_credits, i, and j v3 by Jani: - Squash DSI host allocation and transfer patches together Signed-off-by:
-
Madhav Chauhan authored
This patch fills backlight, CABC and general port info for Gen11 DSI. Signed-off-by:
-
Vandita Kulkarni authored
The same pll manager functions can be used to enable dpll for mipi. Hence enabling the IO power and esc clock as part of pre pll enable call. v2 by Jani: - fix function parameter indent (Madhav) Signed-off-by:
-
Madhav Chauhan authored
This patch allocates memory for DSI encoder and connector which will be used for various DSI encoder/connector operations and attaching the same to DRM subsystem. This patch also extracts DSI modes info from VBT and save the desired mode info to connector. v2 by Jani: - Drop GEN11 prefix from encoder name - Drop extra parenthesis - Drop extra local variable - Squash encoder power domain here v3 by Jani: - Squash connector and connector helper functions here - Move intel_dsi_vbt_init call here Signed-off-by:
-
Madhav Chauhan authored
This patch calculates various DPLL dividers and parameters for DSI encoder and adjust AFE clock for DSI. For DSI, 8x clock is AFE clock. v2: Extend haswell_crtc_compute_clock() for Gen11 DSI v3: Rebase v4: use port clock instead of bitrate. v5: Reabse and remove divide by 5 v6 by Jani: - Fix indent (Madhav) - Fix dpll state calc for EDP and DP MST Co-developed-by:
-
