- 25 Aug, 2017 36 commits
-
-
Hannes Reinecke authored
struct scsi_changer needs refcounting as the device might be removed while the fd is still open. [mkp: whitespace] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Gustavo A. R. Silva authored
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arvind Yadav authored
pnp_device_id are not supposed to change at runtime. All functions working with pnp_device_id provided by <linux/pnp.h> work with const pnp_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
Because we were passing 'qedf_debug' instead of 'debug' to the MODULE_PARM_DESC() macro, modinfo listed the parameter name as 'qedf_debug' instead of it's proper name 'debug'. Correct the parameter name. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
There is no ordering required for the various workqueues the driver uses so they can be converted to regular workqueues. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
Currently in the driver the qedf_ctx attribute vlan_hw_insert is used to which whether to insert a VLAN tag in FIP frames (except for FIP VLAN request which is explicitly sent out untagged at least from the driver's point of view). When we receive a FIP VLAN response, we set qedf->vlan_hw_insert to 0 which makes the qedf_fip_send function insert the VLAN. However when we exhaust our FIP VLAN retries, we do not set qedf->vlan_hw_insert to 0 which means that the driver will not tag the FIP frame with the correct VLAN ID. The result that was observed on the wire is that some entity either in the LL2 or L2 firmware is adding a NULL VLAN tag which can cause FIP solicitation to fail. The offload FCoE frame function, qedf_xmit, does not use the vlan_hw_insert attribute to decide whether to tag frames with the FIP/FCoE VLAN. Instead it unilaterially tags the offload frames with the VLAN ID stored in qedf->vlan_id. This is the correct behavior so the driver can guarantee that non-offload FIP frames go out with the correct VLAN ID. Also use the Linux network layer helpers instead of doing the VLAN insert manually. Also fix setting the fallback VLAN so that it used the module parameter and is not hardcoded to 1002 (though 1002 is the default). [mkp: fixed typo] Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
Currently in the driver we've been using the fc_fcoe_set_mac() function to set the source MAC for FCoE traffic. This works well in most cases as it uses the spec. default FCF-MAC. However, if the administrator changes the FCF-MAC switch, then any FCoE traffic we send will be dropped by the switch. Instead we should check the granted MAC from the FLOGI payload and use that address if it is present. Otherwise, fall back to using the the default FCF-MAC and the fabric ID of the port as the FCoE MAC address. Once this address is known we need to set it when doing non-offload traffic, offload traffic and setting the data_src_address libfcoe uses for FIP keep alive messages. Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Chad Dupuis authored
If dev_info.wwpn and dev_info.wwnn are set by qed use these values to set the WWNs of the port. Otherwise fall back to the old method using fcoe_wwn_from_mac(). Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
Trivial fix to variable name, sfp_additonal_info should be sfp_additional_info (add in missing i). Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Dan Carpenter authored
The code looks like this: i = ntohl(aux->filemark_cnt); if (STp->header_cache != NULL && i < OS_FM_TAB_MAX && (i > STp->filemark_cnt || STp->first_frame_position - 1 != ntohl(STp->header_cache->dat_fm_tab.fm_tab_ent[i]))) { If i is negative then it's less than OS_FM_TAB_MAX so we read before the start of the STp->header_cache->dat_fm_tab.fm_tab_ent[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
The for loop is statement is missing an indent, add it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Colin Ian King authored
An optional discovery status should be printed with a pr_cont and needs a leading space to make it more readable. The final new line should also be a pr_cont and the indentation is out by one, so fix that too. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Simple subenclosures do not need to support SES page 2, so make it optional. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The printk was using the result as argument, leading to a slightly confusing log message. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
We should be checking the return code from ses_recv_diag() to avoid accessing invalid data. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
As the cciss driver has been removed there are no overlapping PCI IDs anymore, and the 'hpsa_allow_any' flag can be removed. Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
The hpsa driver now has support for all boards the cciss driver used to support, so this patch removes the cciss driver and make hpsa an alias to cciss. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Legacy boards might not support the 'extended' report luns format, but as this is to be expected we don't need to print out an error here. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Legacy boards might not support the LV_DEVICE_ID VPD page, so we shouldn't print out an error message here. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Legacy boards might not support volume status, so assume the volume is online here. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Add support for legacy boards, ensuring to enable the driver for those boards only when 'hpsa_allow_any' is set. The attribute 'legacy_board' is set to '1' if the device is a legacy board, and '0' otherwise. Signed-off-by: Hannes Reinecke <hare@suse.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Christophe JAILLET authored
'rc' is known to be 0 at this point. If 'create_context()' fails, returns -ENOMEM instead of 0 which means success. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Helge Deller authored
On parisc I see this UBSAN warning with a sym53c896: UBSAN: Undefined behaviour in ./drivers/scsi/sym53c8xx_2/sym_hipd.c:762:24 index -1903078336 is out of range for type 'u32 [7]' Avoid this warning by switching to div64_ul(). [mkp: fix typo] Signed-off-by: Helge Deller <deller@gmx.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
While the 'state' attribute can (and will) change occasionally, calling 'poll()' or 'select()' on it fails as sysfs is never notified that the state has changed. With this patch calling 'poll()' or 'select()' will work properly. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Hannes Reinecke authored
Rework scsi_internal_device_unblock_nowait() into using a switch statement. No functional changes. Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Arvind Yadav authored
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Bradley Grove <bgrove@attotech.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Richard W.M. Jones authored
Since switching to blk-mq as the default in commit 5c279bd9 ("scsi: default to scsi-mq"), virtio-scsi LUNs consume about 10x as much kernel memory. qemu currently allocates a fixed 128 entry virtqueue. can_queue currently is set to 1024. But with indirect descriptors, each command in the queue takes 1 virtqueue entry, so the number of commands which can be queued is equal to the length of the virtqueue. Note I intend to send a patch to qemu to allow the virtqueue size to be configured from the qemu command line. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Richard W.M. Jones authored
If using indirect descriptors, you can make the total_sg as large as you want. If not, BUG is too serious because the function later returns -ENOSPC. Signed-off-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Manish Rangankar authored
[qed_sp_iscsi_func_start:189(host_7-0)]Cannot satisfy CQ amount. Queues requested 8, CQs available 4. Aborting function start Above condition will resolve as management firmware is capable of telling us the number of CQs available for a given PF, qed will communicate the same number to qedi, So that qedi will know how much CQs are allowed. Signed-off-by: Manish Rangankar <manish.rangankar@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
The driver version is not updated with changes to the driver, so it has no value, so just get rid of it. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
Instances of kfree(shost) should be replaced with scsi_host_put(). In addition, a missing scsi_host_put() is added for error path in hisi_sas_shost_alloc_pci() and v3 driver removal. Signed-off-by: Pan Bian <bianpan2016@163.com> # For main.c changes Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
John Garry authored
Variable res only holds value 0, so remove it. This cleans up a coccicheck warning. Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Add function to set linkrate for v3 hw. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
This patch updates some register setting according to recommendation from HW designer and experiment. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Use ACPI "_RST" method to reset the controller, since FLR is not supported. Function hisi_sas_stop_phys() is introduced to remove some code duplication. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
- 11 Aug, 2017 4 commits
-
-
Xiang Chen authored
This patch adds calls to kill CQ takslets v3 hw during probe failure. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
The channel interrupt is to process all the interrupts except PHY UP/DOWN and broadcast interrupt. So we need to clear all the interrupts except those 3 interrupts after processing channel interrupts. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
Modify STP link timer from 10ms to 500ms. Also add the register address. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-
Xiang Chen authored
For v3 hw, internal abort function required status and command buffer to be set, so add necessary code for this. Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-