- 27 Jul, 2016 31 commits
-
-
Oleg Drokin authored
commit feb9dad5 upstream. It used to be the case that state had an rwlock that was locked for write by downgrades, but for read for upgrades (opens). Well, the problem is if there are two competing opens for the same state, they step on each other toes potentially leading to leaking file descriptors from the state structure, since access mode is a bitmap only set once. Signed-off-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
J. Bruce Fields authored
commit d50039ea upstream. Also simplify the logic a bit. Signed-off-by:
Trond Myklebust <trondmy@primarydata.com> Signed-off-by:
-
Tejun Heo authored
commit 62a584fe upstream. As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Fixes: 9fc3a43e ("writeback: separate out domain_dirty_limits()") Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Lukasz Luba authored
commit f840ab18 upstream. The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Fixes: f6859014 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Acked-by:
Javi Merino <javi.merino@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Andy Lutomirski authored
commit a44323e2 upstream. The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 85b03b30 upstream. This reverts commit 923b93e4. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Borislav Petkov authored
commit 1ead852d upstream. Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Masami Hiramatsu authored
commit dcfc4724 upstream. Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox [ Updated the comments. ] Signed-off-by:
-
H. Peter Anvin authored
commit 9c77679c upstream. For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Paolo Bonzini authored
commit 4c5ea0a9 upstream. The following scenario is possible: CPU 1 CPU 2 static_key_slow_inc() atomic_inc_not_zero() -> key.enabled == 0, no increment jump_label_lock() atomic_inc_return() -> key.enabled == 1 now static_key_slow_inc() atomic_inc_not_zero() -> key.enabled == 1, inc to 2 return ** static key is wrong! jump_label_update() jump_label_unlock() Testing the static key at the point marked by (**) will follow the wrong path for jumps that have not been patched yet. This can actually happen when creating many KVM virtual machines with userspace LAPIC emulation; just run several copies of the following program: #include <fcntl.h> #include <unistd.h> #include <sys/ioctl.h> #include <linux/kvm.h> int main(void) { for (;;) { int kvmfd = open("/dev/kvm", O_RDONLY); int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0); close(ioctl(vmfd, KVM_CREATE_VCPU, 1)); close(vmfd); close(kvmfd); } return 0; } Every KVM_CREATE_VCPU ioctl will attempt a static_key_slow_inc() call. The static key's purpose is to skip NULL pointer checks and indeed one of the processes eventually dereferences NULL. As explained in the commit that introduced the bug: 706249c2 ("locking/static_keys: Rework update logic") jump_label_update() needs key.enabled to be true. The solution adopted here is to temporarily make key.enabled == -1, and use go down the slow path when key.enabled <= 0. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 706249c2 ("locking/static_keys: Rework update logic") Link: http://lkml.kernel.org/r/1466527937-69798-1-git-send-email-pbonzini@redhat.com [ Small stylistic edits to the changelog and the code. ] Signed-off-by:
-
Peter Zijlstra authored
commit 2c610022 upstream. While this prior commit: 54cf809b ("locking,qspinlock: Fix spin_is_locked() and spin_unlock_wait()") ... fixes spin_is_locked() and spin_unlock_wait() for the usage in ipc/sem and netfilter, it does not in fact work right for the usage in task_work and futex. So while the 2 locks crossed problem: spin_lock(A) spin_lock(B) if (!spin_is_locked(B)) spin_unlock_wait(A) foo() foo(); ... works with the smp_mb() injected by both spin_is_locked() and spin_unlock_wait(), this is not sufficient for: flag = 1; smp_mb(); spin_lock() spin_unlock_wait() if (!flag) // add to lockless list // iterate lockless list ... because in this scenario, the store from spin_lock() can be delayed past the load of flag, uncrossing the variables and loosing the guarantee. This patch reworks spin_is_locked() and spin_unlock_wait() to work in both cases by exploiting the observation that while the lock byte store can be delayed, the contender must have registered itself visibly in other state contained in the word. It also allows for architectures to override both functions, as PPC and ARM64 have an additional issue for which we currently have no generic solution. Signed-off-by:
-
Chris Wilson authored
commit 0422e83d upstream. Recursive locking for ww_mutexes was originally conceived as an exception. However, it is heavily used by the DRM atomic modesetting code. Currently, the recursive deadlock is checked after we have queued up for a busy-spin and as we never release the lock, we spin until kicked, whereupon the deadlock is discovered and reported. A simple solution for the now common problem is to move the recursive deadlock discovery to the first action when taking the ww_mutex. Suggested-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Sergei Shtylyov authored
commit 39935466 upstream. The kernel-doc for the of_irq_get[_byname]() is clearly inadequate in describing the return values -- of_irq_get_byname() is documented better than of_irq_get() but it still doesn't mention that 0 is returned iff irq_create_of_mapping() fails (it doesn't return an error code in this case). Document all possible return value variants, making the writing of the word "IRQ" consistent, while at it... Fixes: 9ec36caf ("of/irq: do irq resolution in platform_get_irq") Fixes: ad69674e ("of/irq: do irq resolution in platform_get_irq_byname()") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Wolfram Sang authored
commit b3c0a4da upstream. Because of an improper dereference, a stray 'C' character was output to the modalias when no 'compatible' was specified. This is the case for some old PowerMac drivers which only set the 'name' property. Fix it to let them match again. Reported-by:
Mathieu Malaterre <malat@debian.org> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Tested-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Eric W. Biederman authored
commit 97c1df3e upstream. Add this trivial missing error handling. Fixes: 1b852bce ("mnt: Refactor the logic for mounting sysfs and proc in a user namespace") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
commit 695e9df0 upstream. In rare cases it is possible for s_flags & MS_RDONLY to be set but MNT_READONLY to be clear. This starting combination can cause fs_fully_visible to fail to ensure that the new mount is readonly. Therefore force MNT_LOCK_READONLY in the new mount if MS_RDONLY is set on the source filesystem of the mount. In general both MS_RDONLY and MNT_READONLY are set at the same for mounts so I don't expect any programs to care. Nor do I expect MS_RDONLY to be set on proc or sysfs in the initial user namespace, which further decreases the likelyhood of problems. Which means this change should only affect system configurations by paranoid sysadmins who should welcome the additional protection as it keeps people from wriggling out of their policies. Fixes: 8c6cf9cc ("mnt: Modify fs_fully_visible to deal with locked ro nodev and atime") Signed-off-by:
-
Eric W. Biederman authored
commit d71ed6c9 upstream. MNT_LOCKED implies on a child mount implies the child is locked to the parent. So while looping through the children the children should be tested (not their parent). Typically an unshare of a mount namespace locks all mounts together making both the parent and the slave as locked but there are a few corner cases where other things work. Fixes: ceeb0e5d ("vfs: Ignore unlocked mounts in fs_fully_visible") Reported-by:
Seth Forshee <seth.forshee@canonical.com> Signed-off-by:
-
Oscar authored
commit ea1d39a3 upstream. Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Signed-off-by:
Oscar <oscar@naiandei.net> Signed-off-by:
Peter Chen <peter.chen@nxp.com> Signed-off-by:
-
Alan Stern authored
commit 7e8b3dfe upstream. The HOSTPC extension registers found in some EHCI implementations form a variable-length array, with one element for each port. Therefore the hostpc field in struct ehci_regs should be declared as a zero-length array, not a single-element array. This fixes a problem reported by UBSAN. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Tested-by:
-
Arnd Bergmann authored
commit 23e34392 upstream. A patch that went into Linux-4.4 to fix big-endian mode on a Lantiq MIPS system unfortunately broke big-endian operation on PowerPC APM82181 as reported by Christian Lamparter, and likely other systems. It actually introduced multiple issues: - it broke big-endian ARM kernels: any machine that was working correctly with a little-endian kernel is no longer using byteswaps on big-endian kernels, which clearly breaks them. - On PowerPC the same thing must be true: if it was working before, using big-endian kernels is now broken. Unlike ARM, 32-bit PowerPC usually uses big-endian kernels, so they are likely all broken. - The barrier for dwc2_writel is on the wrong side of the __raw_writel(), so the MMIO no longer synchronizes with DMA operations. - On architectures that require specific CPU instructions for MMIO access, using the __raw_ variant may turn this into a pointer dereference that does not have the same effect as the readl/writel. This patch is a simple revert for all architectures other than MIPS, in the hope that we can more easily backport it to fix the regression on PowerPC and ARM systems without breaking the Lantiq system again. We should follow this up with a more elaborate change to add runtime detection of endianness, to make sure it also works on all other combinations of architectures and implementations of the usb-dwc2 device. That patch however will be fairly large and not appropriate for backports to stable kernels. Felipe suggested a different approach, using an endianness switching register to always put the device into LE mode, but unfortunately the dwc2 hardware does not provide a generic way to do that. Also, I see no practical way of addressing the problem more generally by patching architecture specific code on MIPS. Fixes: 95c8bc36 ("usb: dwc2: Use platform endianness when accessing registers") Acked-by:
John Youn <johnyoun@synopsys.com> Tested-by:
Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Cyril Bur authored
commit 8e96a87c upstream. Userspace can quite legitimately perform an exec() syscall with a suspended transaction. exec() does not return to the old process, rather it load a new one and starts that, the expectation therefore is that the new process starts not in a transaction. Currently exec() is not treated any differently to any other syscall which creates problems. Firstly it could allow a new process to start with a suspended transaction for a binary that no longer exists. This means that the checkpointed state won't be valid and if the suspended transaction were ever to be resumed and subsequently aborted (a possibility which is exceedingly likely as exec()ing will likely doom the transaction) the new process will jump to invalid state. Secondly the incorrect attempt to keep the transactional state while still zeroing state for the new process creates at least two TM Bad Things. The first triggers on the rfid to return to userspace as start_thread() has given the new process a 'clean' MSR but the suspend will still be set in the hardware MSR. The second TM Bad Thing triggers in __switch_to() as the processor is still transactionally suspended but __switch_to() wants to zero the TM sprs for the new process. This is an example of the outcome of calling exec() with a suspended transaction. Note the first 700 is likely the first TM bad thing decsribed earlier only the kernel can't report it as we've loaded userspace registers. c000000000009980 is the rfid in fast_exception_return() Bad kernel stack pointer 3fffcfa1a370 at c000000000009980 Oops: Bad kernel stack pointer, sig: 6 [#1] CPU: 0 PID: 2006 Comm: tm-execed Not tainted NIP: c000000000009980 LR: 0000000000000000 CTR: 0000000000000000 REGS: c00000003ffefd40 TRAP: 0700 Not tainted MSR: 8000000300201031 <SF,ME,IR,DR,LE,TM[SE]> CR: 00000000 XER: 00000000 CFAR: c0000000000098b4 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 00003fffcfa1a370 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 00003fff966611c0 0000000000000000 0000000000000000 0000000000000000 NIP [c000000000009980] fast_exception_return+0xb0/0xb8 LR [0000000000000000] (null) Call Trace: Instruction dump: f84d0278 e9a100d8 7c7b03a6 e84101a0 7c4ff120 e8410170 7c5a03a6 e8010070 e8410080 e8610088 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed023b Kernel BUG at c000000000043e80 [verbose debug info unavailable] Unexpected TM Bad Thing exception at c000000000043e80 (msr 0x201033) Oops: Unrecoverable exception, sig: 6 [#2] CPU: 0 PID: 2006 Comm: tm-execed Tainted: G D task: c0000000fbea6d80 ti: c00000003ffec000 task.ti: c0000000fb7ec000 NIP: c000000000043e80 LR: c000000000015a24 CTR: 0000000000000000 REGS: c00000003ffef7e0 TRAP: 0700 Tainted: G D MSR: 8000000300201033 <SF,ME,IR,DR,RI,LE,TM[SE]> CR: 28002828 XER: 00000000 CFAR: c000000000015a20 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 c00000003ffefa60 c000000000db5500 c0000000fbead000 GPR04: 8000000300001033 2222222222222222 2222222222222222 00000000ff160000 GPR08: 0000000000000000 800000010000d033 c0000000fb7e3ea0 c00000000fe00004 GPR12: 0000000000002200 c00000000fe00000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c0000000fbea7410 00000000ff160000 GPR24: c0000000ffe1f600 c0000000fbea8700 c0000000fbea8700 c0000000fbead000 GPR28: c000000000e20198 c0000000fbea6d80 c0000000fbeab680 c0000000fbea6d80 NIP [c000000000043e80] tm_restore_sprs+0xc/0x1c LR [c000000000015a24] __switch_to+0x1f4/0x420 Call Trace: Instruction dump: 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 This fixes CVE-2016-5828. Fixes: bc2a9408 ("powerpc: Hook in new transactional memory code") Signed-off-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit 2c2a63e3 upstream. The recent commit 7cc85103 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") added a new PVR mask & value to the start of the ibm_architecture_vec[] array. However it missed the fact that further down in the array, we hard code the offset of one of the fields, and then at boot use that value to patch the value in the array. This means every update to the array must also update the #define, ugh. This means that on pseries machines we will misreport to firmware the number of cores we support, by a factor of threads_per_core. Fix it for now by updating the #define. Fixes: 7cc85103 ("powerpc/pseries: Add POWER8NVL support to ibm,client-architecture-support call") Signed-off-by:
-
Gavin Shan authored
commit 8a934efe upstream. In commit 8445a87f "powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism", the PE address was replaced with the PCI config address in order to remove dependency on EEH. According to PAPR spec, firmware (pHyp or QEMU) should accept "xxBBSSxx" format PCI config address, not "xxxxBBSS" provided by the patch. Note that "BB" is PCI bus number and "SS" is the combination of slot and function number. This fixes the PCI address passed to DDW RTAS calls. Fixes: 8445a87f ("powerpc/iommu: Remove the dependency on EEH struct in DDW mechanism") Reported-by:
Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Signed-off-by:
Gavin Shan <gwshan@linux.vnet.ibm.com> Tested-by:
-
Guilherme G. Piccoli authored
commit 8445a87f upstream. Commit 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") changed the pci_dn struct by removing its EEH-related members. As part of this clean-up, DDW mechanism was modified to read the device configuration address from eeh_dev struct. As a consequence, now if we disable EEH mechanism on kernel command-line for example, the DDW mechanism will fail, generating a kernel oops by dereferencing a NULL pointer (which turns to be the eeh_dev pointer). This patch just changes the configuration address calculation on DDW functions to a manual calculation based on pci_dn members instead of using eeh_dev-based address. No functional changes were made. This was tested on pSeries, both in PHyp and qemu guest. Fixes: 39baadbf ("powerpc/eeh: Remove eeh information from pci_dn") Reviewed-by:
-
Jason Gunthorpe authored
commit 8c5122e4 upstream. When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Fixes: fa417f7b ("IB/mlx4: Add support for IBoE") Signed-off-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Bart Van Assche authored
commit 943f44d9 upstream. ib_cm_notify() can be called from interrupt context. Hence do not reenable interrupts unconditionally in cm_establish(). This patch avoids that lockdep reports the following warning: WARNING: CPU: 0 PID: 23317 at kernel/locking/lockdep.c:2624 trace _hardirqs_on_caller+0x112/0x1b0 DEBUG_LOCKS_WARN_ON(current->hardirq_context) Call Trace: <IRQ> [<ffffffff812bd0e5>] dump_stack+0x67/0x92 [<ffffffff81056f21>] __warn+0xc1/0xe0 [<ffffffff81056f8a>] warn_slowpath_fmt+0x4a/0x50 [<ffffffff810a5932>] trace_hardirqs_on_caller+0x112/0x1b0 [<ffffffff810a59dd>] trace_hardirqs_on+0xd/0x10 [<ffffffff815992c7>] _raw_spin_unlock_irq+0x27/0x40 [<ffffffffa0382e9c>] ib_cm_notify+0x25c/0x290 [ib_cm] [<ffffffffa068fbc1>] srpt_qp_event+0xa1/0xf0 [ib_srpt] [<ffffffffa04efb97>] mlx4_ib_qp_event+0x67/0xd0 [mlx4_ib] [<ffffffffa034ec0a>] mlx4_qp_event+0x5a/0xc0 [mlx4_core] [<ffffffffa03365f8>] mlx4_eq_int+0x3d8/0xcf0 [mlx4_core] [<ffffffffa0336f9c>] mlx4_msi_x_interrupt+0xc/0x20 [mlx4_core] [<ffffffff810b0914>] handle_irq_event_percpu+0x64/0x100 [<ffffffff810b09e4>] handle_irq_event+0x34/0x60 [<ffffffff810b3a6a>] handle_edge_irq+0x6a/0x150 [<ffffffff8101ad05>] handle_irq+0x15/0x20 [<ffffffff8101a66c>] do_IRQ+0x5c/0x110 [<ffffffff8159a2c9>] common_interrupt+0x89/0x89 [<ffffffff81297a17>] blk_run_queue_async+0x37/0x40 [<ffffffffa0163e53>] rq_completed+0x43/0x70 [dm_mod] [<ffffffffa0164896>] dm_softirq_done+0x176/0x280 [dm_mod] [<ffffffff812a26c2>] blk_done_softirq+0x52/0x90 [<ffffffff8105bc1f>] __do_softirq+0x10f/0x230 [<ffffffff8105bec8>] irq_exit+0xa8/0xb0 [<ffffffff8103653e>] smp_trace_call_function_single_interrupt+0x2e/0x30 [<ffffffff81036549>] smp_call_function_single_interrupt+0x9/0x10 [<ffffffff8159a959>] call_function_single_interrupt+0x89/0x90 <EOI> Fixes: commit be4b4993 (IB/cm: Do not queue work to a device that's going away) Signed-off-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Nikolay Borisov <kernel@kyup.com> Acked-by:
Erez Shitrit <erezsh@mellanox.com> Signed-off-by:
-
Tony Luck authored
commit c7103f65 upstream. Broadwell made a small change to the rank target register moving the target rank ID field up from bits 16:19 to bits 20:23. Also found that the offset field grew by one bit in the IVY_BRIDGE to HASWELL transition, so fix the RIR_OFFSET() macro too. Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: Aristeu Rozanski <arozansk@redhat.com> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/2943fb819b1f7e396681165db9c12bb3df0e0b16.1464735623.git.tony.luck@intel.comSigned-off-by:
-
Jouni Malinen authored
commit 126e7557 upstream. If a user space program (e.g., wpa_supplicant) deletes a STA entry that is currently in NL80211_PLINK_ESTAB state, the number of established plinks counter was not decremented and this could result in rejecting new plink establishment before really hitting the real maximum plink limit. For !user_mpm case, this decrementation is handled by mesh_plink_deactive(). Fix this by decrementing estab_plinks on STA deletion (mesh_sta_cleanup() gets called from there) so that the counter has a correct value and the Beacon frame advertisement in Mesh Configuration element shows the proper value for capability to accept additional peers. Signed-off-by:
Jouni Malinen <j@w1.fi> Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Martin Willi authored
commit 62397da5 upstream. A wmediumd that does not send this attribute causes a NULL pointer dereference, as the attribute is accessed even if it does not exist. The attribute was required but never checked ever since userspace frame forwarding has been introduced. The issue gets more problematic once we allow wmediumd registration from user namespaces. Fixes: 7882513b ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by:
Martin Willi <martin@strongswan.org> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Bob Copeland authored
commit fe7a7c57 upstream. Currently, the mesh paths associated with a nexthop station are cleaned up in the following code path: __sta_info_destroy_part1 synchronize_net() __sta_info_destroy_part2 -> cleanup_single_sta -> mesh_sta_cleanup -> mesh_plink_deactivate -> mesh_path_flush_by_nexthop However, there are a couple of problems here: 1) the paths aren't flushed at all if the MPM is running in userspace (e.g. when using wpa_supplicant or authsae) 2) there is no synchronize_rcu between removing the path and readers accessing the nexthop, which means the following race is possible: CPU0 CPU1 ~~~~ ~~~~ sta_info_destroy_part1() synchronize_net() rcu_read_lock() mesh_nexthop_resolve() mpath = mesh_path_lookup() [...] -> mesh_path_flush_by_nexthop() sta = rcu_dereference( mpath->next_hop) kfree(sta) access sta <-- CRASH Fix both of these by unconditionally flushing paths before destroying the sta, and by adding a synchronize_net() after path flush to ensure no active readers can still dereference the sta. Fixes this crash: [ 348.529295] BUG: unable to handle kernel paging request at 00020040 [ 348.530014] IP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] *pde = 00000000 [ 348.530014] Oops: 0000 [#1] PREEMPT [ 348.530014] Modules linked in: drbg ansi_cprng ctr ccm ppp_generic slhc ipt_MASQUERADE nf_nat_masquerade_ipv4 8021q ] [ 348.530014] CPU: 0 PID: 20597 Comm: wget Tainted: G O 4.6.0-rc5-wt=V1 #1 [ 348.530014] Hardware name: To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080016 11/07/2014 [ 348.530014] task: f64fa280 ti: f4f9c000 task.ti: f4f9c000 [ 348.530014] EIP: 0060:[<f929245d>] EFLAGS: 00010246 CPU: 0 [ 348.530014] EIP is at ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] [ 348.530014] EAX: f4ce63e0 EBX: 00000088 ECX: f3788416 EDX: 00020008 [ 348.530014] ESI: 00000000 EDI: 00000088 EBP: f6409a4c ESP: f6409a40 [ 348.530014] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 348.530014] CR0: 80050033 CR2: 00020040 CR3: 33190000 CR4: 00000690 [ 348.530014] Stack: [ 348.530014] 00000000 f4ce63e0 f5f9bd80 f6409a64 f9291d80 0000ce67 f5d51e00 f4ce63e0 [ 348.530014] f3788416 f6409a80 f9291dc1 f4ce8320 f4ce63e0 f5d51e00 f4ce63e0 f4ce8320 [ 348.530014] f6409a98 f9277f6f 00000000 00000000 0000007c 00000000 f6409b2c f9278dd1 [ 348.530014] Call Trace: [ 348.530014] [<f9291d80>] mesh_nexthop_lookup+0xbb/0xc8 [mac80211] [ 348.530014] [<f9291dc1>] mesh_nexthop_resolve+0x34/0xd8 [mac80211] [ 348.530014] [<f9277f6f>] ieee80211_xmit+0x92/0xc1 [mac80211] [ 348.530014] [<f9278dd1>] __ieee80211_subif_start_xmit+0x807/0x83c [mac80211] [ 348.530014] [<c04df012>] ? sch_direct_xmit+0xd7/0x1b3 [ 348.530014] [<c022a8c6>] ? __local_bh_enable_ip+0x5d/0x7b [ 348.530014] [<f956870c>] ? nf_nat_ipv4_out+0x4c/0xd0 [nf_nat_ipv4] [ 348.530014] [<f957e036>] ? iptable_nat_ipv4_fn+0xf/0xf [iptable_nat] [ 348.530014] [<c04c6f45>] ? netif_skb_features+0x14d/0x30a [ 348.530014] [<f9278e10>] ieee80211_subif_start_xmit+0xa/0xe [mac80211] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f91bfc7a>] batadv_send_skb_packet+0xd6/0xec [batman_adv] [ 348.530014] [<f91bfdc4>] batadv_send_unicast_skb+0x15/0x4a [batman_adv] [ 348.530014] [<f91b5938>] batadv_dat_send_data+0x27e/0x310 [batman_adv] [ 348.530014] [<f91c30b5>] ? batadv_tt_global_hash_find.isra.11+0x8/0xa [batman_adv] [ 348.530014] [<f91b63f3>] batadv_dat_snoop_outgoing_arp_request+0x208/0x23d [batman_adv] [ 348.530014] [<f91c0cd9>] batadv_interface_tx+0x206/0x385 [batman_adv] [ 348.530014] [<c04c769c>] dev_hard_start_xmit+0x1f8/0x267 [ 348.530014] [<c04c7261>] ? validate_xmit_skb.isra.120.part.121+0x10/0x253 [ 348.530014] [<c04defc6>] sch_direct_xmit+0x8b/0x1b3 [ 348.530014] [<c04c7a9c>] __dev_queue_xmit+0x2c8/0x513 [ 348.530014] [<f80cbd2a>] ? igb_xmit_frame+0x57/0x72 [igb] [ 348.530014] [<c04c7cfb>] dev_queue_xmit+0xa/0xc [ 348.530014] [<f843a326>] br_dev_queue_push_xmit+0xeb/0xfb [bridge] [ 348.530014] [<f843a35f>] br_forward_finish+0x29/0x74 [bridge] [ 348.530014] [<f843a23b>] ? deliver_clone+0x3b/0x3b [bridge] [ 348.530014] [<f843a714>] __br_forward+0x89/0xe7 [bridge] [ 348.530014] [<f843a336>] ? br_dev_queue_push_xmit+0xfb/0xfb [bridge] [ 348.530014] [<f843a234>] deliver_clone+0x34/0x3b [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843a66d>] br_flood+0x77/0x95 [bridge] [ 348.530014] [<f843a809>] br_flood_forward+0x13/0x1a [bridge] [ 348.530014] [<f843a68b>] ? br_flood+0x95/0x95 [bridge] [ 348.530014] [<f843b877>] br_handle_frame_finish+0x392/0x3db [bridge] [ 348.530014] [<c04e9b2b>] ? nf_iterate+0x2b/0x6b [ 348.530014] [<f843baa6>] br_handle_frame+0x1e6/0x240 [bridge] [ 348.530014] [<f843b4e5>] ? br_handle_local_finish+0x6a/0x6a [bridge] [ 348.530014] [<c04c4ba0>] __netif_receive_skb_core+0x43a/0x66b [ 348.530014] [<f843b8c0>] ? br_handle_frame_finish+0x3db/0x3db [bridge] [ 348.530014] [<c023cea4>] ? resched_curr+0x19/0x37 [ 348.530014] [<c0240707>] ? check_preempt_wakeup+0xbf/0xfe [ 348.530014] [<c0255dec>] ? ktime_get_with_offset+0x5c/0xfc [ 348.530014] [<c04c4fc1>] __netif_receive_skb+0x47/0x55 [ 348.530014] [<c04c57ba>] netif_receive_skb_internal+0x40/0x5a [ 348.530014] [<c04c61ef>] napi_gro_receive+0x3a/0x94 [ 348.530014] [<f80ce8d5>] igb_poll+0x6fd/0x9ad [igb] [ 348.530014] [<c0242bd8>] ? swake_up_locked+0x14/0x26 [ 348.530014] [<c04c5d29>] net_rx_action+0xde/0x250 [ 348.530014] [<c022a743>] __do_softirq+0x8a/0x163 [ 348.530014] [<c022a6b9>] ? __hrtimer_tasklet_trampoline+0x19/0x19 [ 348.530014] [<c021100f>] do_softirq_own_stack+0x26/0x2c [ 348.530014] <IRQ> [ 348.530014] [<c022a957>] irq_exit+0x31/0x6f [ 348.530014] [<c0210eb2>] do_IRQ+0x8d/0xa0 [ 348.530014] [<c058152c>] common_interrupt+0x2c/0x40 [ 348.530014] Code: e7 8c 00 66 81 ff 88 00 75 12 85 d2 75 0e b2 c3 b8 83 e9 29 f9 e8 a7 5f f9 c6 eb 74 66 81 e3 8c 005 [ 348.530014] EIP: [<f929245d>] ieee80211_mps_set_frame_flags+0x40/0xaa [mac80211] SS:ESP 0068:f6409a40 [ 348.530014] CR2: 0000000000020040 [ 348.530014] ---[ end trace 48556ac26779732e ]--- [ 348.530014] Kernel panic - not syncing: Fatal exception in interrupt [ 348.530014] Kernel Offset: disabled Reported-by:
Fred Veldini <fred.veldini@gmail.com> Tested-by:
Bob Copeland <me@bobcopeland.com> Signed-off-by:
-
Felix Fietkau authored
commit 6fe04128 upstream. The header field is defined as u8[] but also accessed as struct ieee80211_hdr. Enforce an alignment of 2 to prevent unnecessary unaligned accesses, which can be very harmful for performance on many platforms. Fixes: e495c247 ("mac80211: extend fast-xmit for more ciphers") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
-
- 11 Jul, 2016 9 commits
-
-
Greg Kroah-Hartman authored
-
Steinar H. Gunderson authored
commit 4879efb3 upstream. dwc3-exynos has two problems during init if the regulators are slow to come up (for instance if the I2C bus driver is not on the initramfs) and return probe deferral. First, every time this happens, the driver leaks the USB phys created; they need to be deallocated on error. Second, since the phy devices are created before the regulators fail, this means that there's a new device to re-trigger deferred probing, which causes it to essentially go into a busy loop of re-probing the device until the regulators come up. Move the phy creation to after the regulators have succeeded, and also fix cleanup on failure. On my ODROID XU4 system (with Debian's initramfs which doesn't contain the I2C driver), this reduces the number of probe attempts (for each of the two controllers) from more than 2000 to eight. Signed-off-by:
Steinar H. Gunderson <sesse@google.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by:
Vivek Gautam <gautam.vivek@samsung.com> Fixes: d720f057 ("usb: dwc3: exynos: add nop transceiver support") Signed-off-by:
-
Thierry Reding authored
commit f8a15a96 upstream. There are three EHCI controllers on Tegra SoCs, each with its own reset line. However, the first controller contains a set of UTMI configuration registers that are shared with its siblings. These registers will only be reset as part of the first controller's reset. For proper operation it must be ensured that the UTMI configuration registers are reset before any of the EHCI controllers are enabled, irrespective of the probe order. Commit a47cc24c ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") introduced code that ensures the first controller is always reset before setting up any of the controllers, and is never again reset afterwards. This code, however, grabs the wrong reset. Each EHCI controller has two reset controls attached: 1) the USB controller reset and 2) the UTMI pads reset (really the first controller's reset). In order to reset the UTMI pads registers the code must grab the second reset, but instead it grabbing the first. Fixes: a47cc24c ("USB: EHCI: tegra: Fix probe order issue leading to broken USB") Acked-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Bin Liu authored
commit d246dcb2 upstream. [ 40.467381] ============================================= [ 40.473013] [ INFO: possible recursive locking detected ] [ 40.478651] 4.6.0-08691-g7f3db9a #37 Not tainted [ 40.483466] --------------------------------------------- [ 40.489098] usb/733 is trying to acquire lock: [ 40.493734] (&(&dev->lock)->rlock){-.....}, at: [<bf129288>] ep0_complete+0x18/0xdc [gadgetfs] [ 40.502882] [ 40.502882] but task is already holding lock: [ 40.508967] (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.517811] [ 40.517811] other info that might help us debug this: [ 40.524623] Possible unsafe locking scenario: [ 40.524623] [ 40.530798] CPU0 [ 40.533346] ---- [ 40.535894] lock(&(&dev->lock)->rlock); [ 40.540088] lock(&(&dev->lock)->rlock); [ 40.544284] [ 40.544284] *** DEADLOCK *** [ 40.544284] [ 40.550461] May be due to missing lock nesting notation [ 40.550461] [ 40.557544] 2 locks held by usb/733: [ 40.561271] #0: (&f->f_pos_lock){+.+.+.}, at: [<c02a6114>] __fdget_pos+0x40/0x48 [ 40.569219] #1: (&(&dev->lock)->rlock){-.....}, at: [<bf12a420>] ep0_read+0x20/0x5e0 [gadgetfs] [ 40.578523] [ 40.578523] stack backtrace: [ 40.583075] CPU: 0 PID: 733 Comm: usb Not tainted 4.6.0-08691-g7f3db9a #37 [ 40.590246] Hardware name: Generic AM33XX (Flattened Device Tree) [ 40.596625] [<c010ffbc>] (unwind_backtrace) from [<c010c1bc>] (show_stack+0x10/0x14) [ 40.604718] [<c010c1bc>] (show_stack) from [<c04207fc>] (dump_stack+0xb0/0xe4) [ 40.612267] [<c04207fc>] (dump_stack) from [<c01886ec>] (__lock_acquire+0xf68/0x1994) [ 40.620440] [<c01886ec>] (__lock_acquire) from [<c0189528>] (lock_acquire+0xd8/0x238) [ 40.628621] [<c0189528>] (lock_acquire) from [<c06ad6b4>] (_raw_spin_lock_irqsave+0x38/0x4c) [ 40.637440] [<c06ad6b4>] (_raw_spin_lock_irqsave) from [<bf129288>] (ep0_complete+0x18/0xdc [gadgetfs]) [ 40.647339] [<bf129288>] (ep0_complete [gadgetfs]) from [<bf10a728>] (musb_g_giveback+0x118/0x1b0 [musb_hdrc]) [ 40.657842] [<bf10a728>] (musb_g_giveback [musb_hdrc]) from [<bf108768>] (musb_g_ep0_queue+0x16c/0x188 [musb_hdrc]) [ 40.668772] [<bf108768>] (musb_g_ep0_queue [musb_hdrc]) from [<bf12a944>] (ep0_read+0x544/0x5e0 [gadgetfs]) [ 40.678963] [<bf12a944>] (ep0_read [gadgetfs]) from [<c0284470>] (__vfs_read+0x20/0x110) [ 40.687414] [<c0284470>] (__vfs_read) from [<c0285324>] (vfs_read+0x88/0x114) [ 40.694864] [<c0285324>] (vfs_read) from [<c0286150>] (SyS_read+0x44/0x9c) [ 40.702051] [<c0286150>] (SyS_read) from [<c0107820>] (ret_fast_syscall+0x0/0x1c) This is caused by the spinlock bug in ep0_read(). Fix the two other deadlock sources in gadgetfs_setup() too. Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Sudip Mukherjee authored
commit dcb21ad4 upstream. parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by:
-
Mathias Nyman authored
commit 3425aa03 upstream. If commands timeout we mark them for abortion, then stop the command ring, and turn the commands to no-ops and finally restart the command ring. If the host is working properly the no-op commands will finish and pending completions are called. If we notice the host is failing, driver clears the command ring and completes, deletes and frees all pending commands. There are two separate cases reported where host is believed to work properly but is not. In the first case we successfully stop the ring but no abort or stop command ring event is ever sent and host locks up. The second case is if a host is removed, command times out and driver believes the ring is stopped, and assumes it will be restarted, but actually ends up timing out on the same command forever. If one of the pending commands has the xhci->mutex held it will block xhci_stop() in the remove codepath which otherwise would cleanup pending commands. Add a check that clears all pending commands in case host is removed, or we are stuck timing out on the same command. Also restart the command timeout timer when stopping the command ring to ensure we recive an ring stop/abort event. Tested-by:
Joe Lawrence <joe.lawrence@stratus.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Hans de Goede authored
commit d95815ba upstream. I got one of these cards for testing uas with, it seems that with streams it dma-s all over the place, corrupting memory. On my first tests it managed to dma over the BIOS of the motherboard somehow and completely bricked it. Tests on another motherboard show that it does work with streams disabled. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Thomas Petazzoni authored
commit de95c40d upstream. On some platforms, the clocks might be registered by a platform driver. When this is the case, the clock platform driver may very well be probed after xhci-plat, in which case the first probe() invocation of xhci-plat will receive -EPROBE_DEFER as the return value of devm_clk_get(). The current code handles that as a normal error, and simply assumes that this means that the system doesn't have a clock for the XHCI controller, and continues probing without calling clk_prepare_enable(). Unfortunately, this doesn't work on systems where the XHCI controller does have a clock, but that clock is provided by another platform driver. In order to fix this situation, we handle the -EPROBE_DEFER error condition specially, and abort the XHCI controller probe(). It will be retried later automatically, the clock will be available, devm_clk_get() will succeed, and the probe() will continue with the clock prepared and enabled as expected. In practice, such issue is seen on the ARM64 Marvell 7K/8K platform, where the clocks are registered by a platform driver. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Gabriel Krisman Bertazi authored
commit 27a41a83 upstream. Under stress occasions some TI devices might not return early when reading the status register during the quirk invocation of xhci_irq made by usb_hcd_pci_remove. This means that instead of returning, we end up handling this interruption in the middle of a shutdown. Since xhci->event_ring has already been freed in xhci_mem_cleanup, we end up accessing freed memory, causing the Oops below. commit 8c24d6d7 ("usb: xhci: stop everything on the first call to xhci_stop") is the one that changed the instant in which we clean up the event queue when stopping a device. Before, we didn't call xhci_mem_cleanup at the first time xhci_stop is executed (for the shared HCD), instead, we only did it after the invocation for the primary HCD, much later at the removal path. The code flow for this oops looks like this: xhci_pci_remove() usb_remove_hcd(xhci->shared) xhci_stop(xhci->shared) xhci_halt() xhci_mem_cleanup(xhci); // Free the event_queue usb_hcd_pci_remove(primary) xhci_irq() // Access the event_queue if STS_EINT is set. Crash. xhci_stop() xhci_halt() // return early The fix modifies xhci_stop to only cleanup the xhci data when releasing the primary HCD. This way, we still have the event_queue configured when invoking xhci_irq. We still halt the device on the first call to xhci_stop, though. I could reproduce this issue several times on the mainline kernel by doing a bind-unbind stress test with a specific storage gadget attached. I also ran the same test over-night with my patch applied and didn't observe the issue anymore. [ 113.334124] Unable to handle kernel paging request for data at address 0x00000028 [ 113.335514] Faulting instruction address: 0xd00000000d4f767c [ 113.336839] Oops: Kernel access of bad area, sig: 11 [#1] [ 113.338214] SMP NR_CPUS=1024 NUMA PowerNV [c000000efe47ba90] c000000000720850 usb_hcd_irq+0x50/0x80 [c000000efe47bac0] c00000000073d328 usb_hcd_pci_remove+0x68/0x1f0 [c000000efe47bb00] d00000000daf0128 xhci_pci_remove+0x78/0xb0 [xhci_pci] [c000000efe47bb30] c00000000055cf70 pci_device_remove+0x70/0x110 [c000000efe47bb70] c00000000061c6bc __device_release_driver+0xbc/0x190 [c000000efe47bba0] c00000000061c7d0 device_release_driver+0x40/0x70 [c000000efe47bbd0] c000000000619510 unbind_store+0x120/0x150 [c000000efe47bc20] c0000000006183c4 drv_attr_store+0x64/0xa0 [c000000efe47bc60] c00000000039f1d0 sysfs_kf_write+0x80/0xb0 [c000000efe47bca0] c00000000039e14c kernfs_fop_write+0x18c/0x1f0 [c000000efe47bcf0] c0000000002e962c __vfs_write+0x6c/0x190 [c000000efe47bd90] c0000000002eab40 vfs_write+0xc0/0x200 [c000000efe47bde0] c0000000002ec85c SyS_write+0x6c/0x110 [c000000efe47be30] c000000000009260 system_call+0x38/0x108 Signed-off-by:
Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com> Cc: Roger Quadros <rogerq@ti.com> Cc: joel@jms.id.au Reviewed-by:
Roger Quadros <rogerq@ti.com> Tested-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
