- 17 May, 2014 3 commits
-
-
Bjørn Mork authored
Now that we have split out the part of the device setup which MUST be done with the data interface in altsetting 0, we can delay the rest of the initialization. This allows us to move some of post-init buffer size config from bind to the appropriate setup function. The purpose of this refactoring is to collect all code adjusting the rx_max and tx_max buffers in one place, so that it is easier to call it from multiple call sites. Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bjørn Mork authored
Split the parts of setup dealing with device initialization from parts just setting defaults for attributes which might be changed after initialization. Some commands of the device initialization are only allowed when the data interface is in its disabled altsetting, so we must separate them out of we are to allow rerunning parts of setup. Signed-off-by:
-
Bjørn Mork authored
Split out the part of setup dealing with updating the rx_max and tx_max buffer sizes so that this code can be reused for dynamically updating the limits. Signed-off-by:
-
- 16 May, 2014 37 commits
-
-
Thomas Graf authored
Signed-off-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
-
David S. Miller authored
Phoebe Buckheister says: ==================== 802154: implement link-layer security This patch series implements 802.15.4-2011 link layer security. Patches 1 and 2 prepare for llsec by adding data structures to represent the llsec PIB as specified in 802.15.4-2011. I've changed some structures from their specification to be more sensible, since 802.15.4 specifies some structures in not-exactly-useful ways. Nested lists are common, but not very accessible for netlink methods, and not very fast to traverse when searching for specific elements either. Patch 3 implements backends for these structures in mac802154. Patch 4 and 5 implement the encryption and decryption methods, split from patch 3 to ease review. The encryption and decryption methods are almost entirely compliant with the specified outgoing/incoming frame procedures. Decryption deviates from the specification slightly where the specification makes no sense, i.e. encrypted frames with security level 0 may be sent, but must be dropped an reception - but transforms for processing such frames are given a few lines in the standard. I've opted to not drop these frames instead of not implementing the transforms that wouldn't be used if they were dropped. Patch 6 links the mac802154 llsec with the SoftMAC devices. This is mainly init//fini code for llsec context, handling of security subheaders and calling the encryption/decryption methods. Patch 7 adds sockopts to 802.15.4 dgram sockets to modifiy outgoing security parameters on a per-socket basis. Ideally, this would also be available for sockets on 6lowpan devices, but I'm not sure how to do that nicely. Patch 8 adds forwarders to the llsec configuration methods for netlink, patch 10 implements these netlink accessors. This is mainly mechanical. Patch 11, implements a key tracking option for devices that previous patches haven't, because I'm not entirely sure whether this is the best approach to the problem. It performs reasonably well though, so I decided to include it as a separate patch in this series instead of sending an RFC just for this one option. ==================== Signed-off-by: -
Phoebe Buckheister authored
The 802.15.4-2011 standard states that for each key, a list of devices that use this key shall be kept. Previous patches have only considered two options: * a device "uses" (or may use) all keys, rendering the list useless * a device is restricted to a certain set of keys Another option would be that a device *may* use all keys, but need not do so, and we are interested in the actual set of keys the device uses. Recording keys used by any given device may have a noticable performance impact and might not be needed as often. The common case, in which a device will not switch keys too often, should still perform well. Signed-off-by:
Phoebe Buckheister <phoebe.buckheister@itwm.fraunhofer.de> Signed-off-by:
-
Phoebe Buckheister authored
This patch adds user-visible interfaces for the llsec infrastructure. For the added methods, the only major difference between all add/remove implementation lies in how the specific object is parsed, and for dump requests, how objects are written into netlink messages. To save on boilerplate code, table dumps are routed through a helper function that handles netlink dump state, leaving the actual dumping code to care only about iterating over the table to be dumped and filling netlink messages. For add/remove methods, the boilerplate required to work is not quite as large, but still enough to also move into a local helper. Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Allow datagram sockets to override the security settings of the device they send from on a per-socket basis. Requires CAP_NET_ADMIN or CAP_NET_RAW, since raw sockets can send arbitrary packets anyway. Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
Signed-off-by:
-
Phoebe Buckheister authored
This patch adds containers and mutators for the major ieee802154_llsec structures to mac802154. Most of the (rather simple) ieee802154_llsec structs are wrapped only to provide an rcu_head for orderly disposal, but some structs - llsec keys notably - require more complex bookkeeping. Since each llsec key may be referenced by a number of llsec key table entries (with differing key ids, but the same actual key), we want to save memory and not allocate crypto transforms for each entry in the table. Thus, the mac802154 llsec key is reference-counted instead. Further, each key will have four associated crypto transforms - three CCM transforms for the authsizes 4/8/16 and one CTR transform for unauthenticated encryption. If we had a CCM* transform that allowed authsize 0, and authsize as part of requests instead of transforms, this would not be necessary. Signed-off-by:
-
Phoebe Buckheister authored
Link-layer security requires AES CCM for authenticated modes and AES CTR for the unauthenticated encryption mode. Signed-off-by:
-
Phoebe Buckheister authored
The added structures match 802.15.4-2011 link-layer security PIBs as closely as is reasonable. Some lists required by the standard were modeled as bitmaps (frame_types and command_frame_ids in *llsec_key, 802.15.4-2011 7.5/Table 61), since using lists for those seems a bit excessive and not particularly useful. The DeviceDescriptorHandleList was inverted and is here a per-device list, since operations on this list are likely to have both a key and a device at hand, and per-device lists of keys are shorter than per-key lists of devices. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitchDavid S. Miller authored
Jesse Gross says: ==================== A set of OVS changes for net-next/3.16. The major change here is a switch from per-CPU to per-NUMA flow statistics. This improves scalability by reducing kernel overhead in flow setup and maintenance. ==================== Signed-off-by: -
David S. Miller authored
Thomas Petazzoni says: ==================== Add DT support for fixed PHYs Here is a fourth version of the patch set that adds a Device Tree binding and the related code to support fixed PHYs. I'm hoping to get this merged in 3.16. Changes since v3: * Rebased on top of v3.15-rc5 * In patch "net: phy: decouple PHY id and PHY address in fixed PHY driver", changed the PHY ID of fixed PHYs from 0xdeadbeef to 0x0, as suggested by Grant Likely. * Fixed the !CONFIG_PHY_FIXED case in patch "net: phy: extend fixed driver with fixed_phy_register()". Noticed by Florian Fainelli. * Added Acked-by from Grant Likely and Florian Fainelli on patch "net: phy: extend fixed driver with fixed_phy_register()". * Reworked the new fixed-link DT binding to be just a sub-node of the Ethernet MAC node, and not a node referenced by the 'phy' property. This was requested by Grant Likely. * Reworked the code implementing the new DT binding to also make it accept the old, single property based, DT binding. * Added a patch that actually uses the new fixed link DT binding for the Armada XP Matrix board. Changes since v2: * Rebased on top of v3.14-rc1, and re-tested on hardware. * Removed the RFC tag, since there seems to be some real interest in this feature, and the code has gone through several iterations already. * The error handling in fixed_phy_register() has been fixed. Changes since v1: * Instead of using a 'fixed-link' property inside the Ethernet device DT node, with a fairly cryptic succession of integer values, we now use a PHY subnode under the Ethernet device DT node, with explicit properties to configure the duplex, speed, pause and other PHY properties. * The PHY address is automatically allocated by the kernel and no longer visible in the Device Tree binding. * The PHY device is created directly when the network driver calls of_phy_connect_fixed_link(), and associated to the PHY DT node, which allows the existing of_phy_connect() function to work, without the need to use the deprecated of_phy_connect_fixed_link(). Posts of previous versions: RFCv1: http://www.spinics.net/lists/netdev/msg243253.html RFCv2: http://lists.infradead.org/pipermail/linux-arm-kernel/2013-September/196919.html PATCHv3: http://www.spinics.net/lists/netdev/msg273117.html ==================== Signed-off-by:
-
Thomas Petazzoni authored
The Armada XP Matrix board has an Ethernet PHY that isn't configurable through the MDIO bus, so we use the newly introduced fixed-link PHY DT binding to represent the PHY of this platform and get network working. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by:
-
Thomas Petazzoni authored
Following the introduction of of_phy_register_fixed_link(), this patch introduces fixed link support in the mvneta driver, for Marvell Armada 370/XP SOCs. Signed-off-by:
-
Thomas Petazzoni authored
Some Ethernet MACs have a "fixed link", and are not connected to a normal MDIO-managed PHY device. For those situations, a Device Tree binding allows to describe a "fixed link" using a special PHY node. This patch adds: * A documentation for the fixed PHY Device Tree binding. * An of_phy_is_fixed_link() function that an Ethernet driver can call on its PHY phandle to find out whether it's a fixed link PHY or not. It should typically be used to know if of_phy_register_fixed_link() should be called. * An of_phy_register_fixed_link() function that instantiates the fixed PHY into the PHY subsystem, so that when the driver calls of_phy_connect(), the PHY device associated to the OF node will be found. These two additional functions also support the old fixed-link Device Tree binding used on PowerPC platforms, so that ultimately, the network device drivers for those platforms could be converted to use of_phy_is_fixed_link() and of_phy_register_fixed_link() instead of of_phy_connect_fixed_link(), while keeping compatibility with their respective Device Tree bindings. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
-
Thomas Petazzoni authored
The existing fixed_phy_add() function has several drawbacks that prevents it from being used as is for OF-based declaration of fixed PHYs: * The address of the PHY on the fake bus needs to be passed, while a dynamic allocation is desired. * Since the phy_device instantiation is post-poned until the next mdiobus scan, there is no way to associate the fixed PHY with its OF node, which later prevents of_phy_connect() from finding this fixed PHY from a given OF node. To solve this, this commit introduces fixed_phy_register(), which will allocate an available PHY address, add the PHY using fixed_phy_add() and instantiate the phy_device structure associated with the provided OF node. Signed-off-by:
Grant Likely <grant.likely@linaro.org> Tested-by:
-
Thomas Petazzoni authored
Until now, the fixed_phy_add() function was taking as argument 'phy_id', which was used both as the PHY address on the fake fixed MDIO bus, and as the PHY id, as available in the MII_PHYSID1 and MII_PHYSID2 registers. However, those two informations are completely unrelated. This patch decouples them. The PHY id of fixed PHYs is hardcoded to be 0x0. Ideally, a really reserved value would be nicer, but there doesn't seem to be an easy of making sure a dummy value can be assigned to the Linux kernel for such usage. The PHY address remains passed by the caller of phy_fixed_add(). Signed-off-by:
-
David S. Miller authored
Vlad Yasevich says: ==================== bridge: Non-promisc bridge ports support This series adds functionality to the bridge device to enable operations without setting all ports to promiscuous mode. The basic concept is this. The bridge keeps track of the ports that support learning and flooding packets to unknown destinations. We call these ports auto-discovery ports since they automatically discover who is behind them through learning and flooding. If flooding and learning are disabled via flags, then the port requires static configuration to tell it which mac addresses are behind it. This is accomplished through adding of fdbs. These fdbs should be static as dynamic fdbs can expire and systems will become unreachable due to lack of flooding. If the user marks all ports as needing static configuration then we can safely make them non-promiscuous since we will know all the information about them. If the user leaves only 1 port as automatic, then we can mark that port as not-promiscuous as well. One could think of this a edge relay similar to what's support by embedded switches in SRIOV devices. Since we have all the information about the other ports, we can just program the mac addresses into the single automatic port to receive all necessary traffic. More information about this is patch 6. In other cases, we keep all ports promiscuous as before. There are some other cases when promiscuous mode has to be turned back on. One is when the bridge itself if placed in promiscuous mode (user sets promisc flag). The other is if vlan filtering is turned off. Since this is the default configuration, the default bridge operation is not changed. Changes since v2: - White space and spelling fixes from Michael Tsirkin - Squash patches 6, 7 and 8 to prevent bisect breakage. Changes since v1: - Address issues rasied by Stephen Heminger - Address initializer comments raised by Sergey Shtylyov - Rebased recent net-next. Changes since rfc v2: - Better description of in the commit logs - Leave port in promiscuous mode if IFF_UNICAST_FLT is disabled on the device. - Fix issue with flag masking - Rework patch ordering a bit. Changes since rfc v1: - Removed private list. We now traverse the fdb hashtable itself to write necessary addresses to the ports (Stephen's concern) - Add learning flag to the mask for flags that decides if the port is 'auto' or not (suggest by MST and Jamal). - Simplified tracking of such ports at the cost of a loop over all ports (suggested by MST) I've played with quite a large number of ports and the current approach seems to work fairly well. ==================== Signed-off-by: -
Vlad Yasevich authored
There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by:Michael S. Tsirkin <mst@redhat.com> Acked-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
When a static fdb entry is created, add the mac address from this fdb entry to any ports that are currently running in non-promiscuous mode. These ports need this data so that they can receive traffic destined to these addresses. By default ports start in promiscuous mode, so this feature is disabled. Acked-by:
-
Vlad Yasevich authored
Introduce a BR_PROMISC per-port flag that will help us track if the current port is supposed to be in promiscuous mode or not. For now, always start in promiscuous mode. Acked-by:
-
Vlad Yasevich authored
Add code that allows static fdb entires to be synced to the hw list for a specified port. This will be used later to program ports that can function in non-promiscuous mode. Acked-by:
-
Vlad Yasevich authored
By default, ports on the bridge are capable of automatic discovery of nodes located behind the port. This is accomplished via flooding of unknown traffic (BR_FLOOD) and learning the mac addresses from these packets (BR_LEARNING). If the above functionality is disabled by turning off these flags, the port requires static configuration in the form of static FDB entries to function properly. This patch adds functionality to keep track of all ports capable of automatic discovery. This will later be used to control promiscuity settings. Acked-by:
-
Vlad Yasevich authored
Turn the flag change macro into a function to allow easier updates and to reduce space. Acked-by:
-
Jean Delvare authored
The pch_gbe driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Signed-off-by:
Jean Delvare <jdelvare@suse.de> Cc: Jiri Slaby <jslaby@suse.cz> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Duan Jiong authored
When using command "ip tunnel add" to add a tunnel, the tunnel will be added twice, through ip_tunnel_create() and ip_tunnel_update(). Because the second is unnecessary, so we can just break after adding tunnel through ip_tunnel_create(). Signed-off-by:
Duan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by:
-
Alexei Starovoitov authored
JITed seccomp filters can be quite large if they check a lot of syscalls Simply increase buffer size Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Alexei Starovoitov authored
seccomp filters use kernel JIT image addresses, so bpf_jit_enable=2 prints [ 20.146438] flen=3 proglen=82 pass=0 image=0000000000000000 [ 20.146442] JIT code: 00000000: 55 48 89 e5 48 81 ec 28 02 00 00 ... ignore image address, so that seccomp filters can be disassembled Signed-off-by:
-
David S. Miller authored
Florian Fainelli says: ==================== net: systemport: DMA and MAC fixes This patch series contains a critical fix in how the DMA unmapping of packet is done, as well as a less critical fix in how we disable the Ethernet MAC RX/TX functions. ==================== Signed-off-by: -
Florian Fainelli authored
When umac_enable_set() is used to disable the UniMAC receiver or transmitter, we need to make sure that we wait for a full-sized packet to be processed because the UniMAC hardware stops on a packet boundary, not immediately. Signed-off-by:
-
Florian Fainelli authored
dma_unmap_single() was called with dma_unmap_len(cb, dma_len), unfortunately we failed to assign this length field in bcm_sysport_rx_refill() or bcm_sysport_alloc_rx_bufs() using dma_unmap_len_set(). This causes packet contents corruption because are we not invoking the cache invalidation routines with the proper length. Fix this by using the full RX buffer size (RX_BUF_LENGTH) because the mappings for the RX bufers are created with that size. Signed-off-by:
-
Monam Agarwal authored
This patch replaces rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by:
Monam Agarwal <monamagarwal123@gmail.com> Signed-off-by:
Jesse Gross <jesse@nicira.com>
-
Jarno Rajahalme authored
We already extract the TCP flags for the key, might as well use that for stats. Signed-off-by:
Jarno Rajahalme <jrajahalme@nicira.com> Acked-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Jarno Rajahalme authored
The 'output' argument of the ovs_nla_put_flow() is the one from which the bits are written to the netlink attributes. For SCTP we accidentally used the bits from the 'swkey' instead. This caused the mask attributes to include the bits from the actual flow key instead of the mask. Signed-off-by:
-
