Impact: fix infinite retry loop

After a command failed, ide-tape and floppy inserts REQUEST_SENSE in
front of the failed command and according to the result, sets
pc->retries, flags and errors.  After REQUEST_SENSE is complete, the
failed command is again at the front of the queue and if the verdict
was to terminate the request, the issue functions tries to complete it
directly by calling drive->pc_callback() and returning ide_stopped.

However, drive->pc_callback() doesn't complete a request.  It only
prepares for completion of the request.  As a result, this creates an
infinite loop where the failed request is retried perpetually.

Fix it by actually ending the request by calling ide_complete_rq().
Signed-off-by: Tejun Heo <tj@kernel.org>

Impact: cleanup rq->data usage

ide-pm uses rq->data to carry pointer to struct request_pm_state
through request queue and rq->special is used to carray pointer to
local struct ide_cmd, which isn't necessary.  Use rq->special for
request_pm_state instead and use local ide_cmd in
ide_start_power_step().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

Impact: unify request data buffer handling

rq->data is used mostly to pass kernel buffer through request queue
without using bio.  There are only a couple of places which still do
this in kernel and converting to bio isn't difficult.

This patch converts ide-cd and atapi to use bio instead of rq->data
for request sense and internal pc commands.  With previous change to
unify sense request handling, this is relatively easily achieved by
adding blk_rq_map_kern() during sense_rq prep and PC issue.

If blk_rq_map_kern() fails for sense, the error is deferred till sense
issue and aborts the failed command which triggered the sense.  Note
that this is a slim possibility as sense prep is done on each command
issue, so for the above condition to actually trigger, all preps since
the last sense issue till the issue of the request which would require
a sense should fail.

* do_request functions might sleep now.  This should be okay as ide
  request_fn - do_ide_request() - is invoked only from make_request
  and plug work.  Make sure this is the case by adding might_sleep()
  to do_ide_request().

* Functions which access the read sense data before the sense request
  is complete now should access bio_data(sense_rq->bio) as the sense
  buffer might have been copied during blk_rq_map_kern().

* ide-tape updated to map sg.

* cdrom_do_block_pc() now doesn't have to deal with REQ_TYPE_ATA_PC
  special case.  Simplified.

* tp_ops->output/input_data path dropped from ide_pc_intr().
Signed-off-by: Tejun Heo <tj@kernel.org>

Since we're issuing REQ_TYPE_SENSE now we need to allow those types of
rqs in the ->do_request callbacks. As a future improvement, sense_len
assignment might be unified across all ATAPI devices. Borislav to
check with specs and test.

As a result, get rid of ide_queue_pc_head() and
drive->request_sense_rq.

tj: * Init request sense ide_atapi_pc from sense request.  In the
      longer timer, it would probably better to fold
      ide_create_request_sense_cmd() into its only current user -
      ide_floppy_get_format_progress().

    * ide_retry_pc() no longer takes @disk.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Preallocate a sense request in the ->do_request method and reinitialize
it only on demand, in case it's been consumed in the IRQ handler path.
The reason for this is that we don't want to be mapping rq to bio in
the IRQ path and introduce all kinds of unnecessary hacks to the block
layer.

tj: * Both user and kernel PC requests expect sense data to be stored
      in separate storage other than drive->sense_data.  Copy sense
      data to rq->sense on completion if rq->sense is not NULL.  This
      fixes bogus sense data on PC requests.

As a result, remove cdrom_queue_request_sense.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This is in preparation of removing the queueing of a sense request out
of the IRQ handler path.

Use struct request_sense as a general sense buffer for all ATAPI
devices ide-{floppy,tape,cd}.

tj: * blk_get_request(__GFP_WAIT) can't be called from do_request() as
      it can cause deadlock.  Converted to use inline struct request
      and blk_rq_init().

    * Added xfer / cdb len selection depending on device type.

    * All sense prep logics folded into ide_prep_sense() which never
      fails.

    * hwif->rq clearing and sense_rq used handling moved into
      ide_queue_sense_rq().

    * blk_rq_map_kern() conversion is moved to later patch.

CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
CC: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Impact: rq->buffer usage cleanup

ide-cd uses rq->buffer to carry pointer to the original request when
issuing REQUEST_SENSE.  Use rq->special instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

Impact: rq->buffer usage cleanup

ide-atapi uses rq->buffer as private opaque value for internal special
requests.  rq->special isn't used for these cases (the only case where
rq->special is used is for ide-tape rw requests).  Use rq->special
instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

Impact: rq->buffer usage cleanup

ide_raw_taskfile() directly uses rq->buffer to carry pointer to the
data buffer.  This complicates both block interface and ide backend
request handling.  Use blk_rq_map_kern() instead and drop special
handling for REQ_TYPE_ATA_TASKFILE from ide_map_sg().

Note that REQ_RW setting is moved upwards as blk_rq_map_kern() uses it
to initialize bio rw flag.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

Impact: remove unnecessary code path

Block pc requests always use bio and rq->data is always NULL.  No need
to worry about !rq->bio cases in idefloppy_block_pc_cmd().  Note that
ide-atapi uses ide_pio_bytes() for bio PIO transfer which handle sg
fine.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>

Impact: code simplification

ide_cd_request_sense_fixup() clears the tail of the sense buffer if
the device didn't completely fill it.  This patch makes
cdrom_queue_request_sense() clear the sense buffer before issuing the
command instead of clearing it afterwards.  This simplifies code and
eases future changes.
Signed-off-by: Tejun Heo <tj@kernel.org>

Impact: removal of unused field

No one uses ide_cmd->special anymore.  Kill it.
Signed-off-by: Tejun Heo <tj@kernel.org>

ide doesn't have to worry about REQ_SOFTBARRIER.  Don't set it.
Signed-off-by: Tejun Heo <tj@kernel.org>

blk_start_queueing() is being phased out in favor of
[__]blk_run_queue().  Switch.
Signed-off-by: Tejun Heo <tj@kernel.org>

Impact: fix an oops which always triggers

ide_tape_issue_pc() assumed drive->pc isn't NULL on invocation when
checking for back-to-back request sense issues but drive->pc can be
NULL and even when it's not NULL, it's not safe to dereference it once
the previous command is complete because pc could have been freed or
was on stack.  Kill back-to-back REQUEST_SENSE detection.
Signed-off-by: Tejun Heo <tj@kernel.org>

Impact: subtle behavior change

For fs requests, rq is only carrier of bios and rq error status as a
whole doesn't mean much.  This is the reason why rq->errors is being
cleared on each partial completion of a request as on each partial
completion the error status is transferred to the respective bios.

For pc requests, rq->errors is used to carry error status to the
issuer and thus __end_that_request_first() doesn't clear it on such
cases.

The condition was fine till now as only fs and pc requests have used
bio and thus the bio completion path.  However, future changes will
unify data accesses to bio and all non fs users care about rq error
status.  Clear rq->errors on bio completion only for fs requests.

In general, the implicit clearing is a bit too subtle especially as
the meaning of rq->errors is completely dependent on low level
drivers.  Unifying / cleaning up rq->errors usage and letting llds
manage it would be better.  TODO comment added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>

Now that the bio list management stuff is generic, convert loop to use
bio lists instead of its own private bio list implementation.

Cc:  Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

hd dance around local irq and HD_IRQ enable without achieving much.
It ends up transferring data from irq handler with both local irq and
HD_IRQ disabled.  The only place it actually does something is while
transferring the first block of a request which it does with HD_IRQ
disabled but local irq enabled.

Unfortunately, the dancing is horribly broken from locking POV.  IRQ
and timeout handlers access block queue without grabbing the queue
lock and running the driver in SMP configuration crashes the whole
machine pretty quickly.

Remove meaningless irq enable/disable dancing and add proper locking
in issue, irq and timeout paths.
Signed-off-by: Tejun Heo <tj@kernel.org>

drivers/block/mg_disk.c: In function ‘mg_dump_status’:
drivers/block/mg_disk.c:265: warning: format ‘%ld’ expects type ‘long int’, but
argument 2 has type ‘sector_t’

[ Impact: kill build warning ]

Cc: unsik Kim <donari75@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

IRQ and timeout handlers call functions which expect locked queue lock
without locking it.  Fix it.

While at it, convert 0s used as null pointer constant to NULLs.

[ Impact: fix locking, cleanup ]
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: unsik Kim <donari75@gmail.com>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Paul Mundt <lethal@linux-sh.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This has the consequence of changing the section name use for head
code from ".text.head" to ".head.text".  Since this commit changes all
users in the architecture, this change should be harmless.
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Richard Henderson <rth@twiddle.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch is preparation for replacing all uses of ".head.text" or
".text.head" in the kernel with macros, so that the section name can
later be changed without having to touch a lot of the kernel.

Since some linker scripts do more complex things than referencing
HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the
actual name.

I've defined HEAD_TEXT_SECTION in a new header,
include/linux/section-names.h, so that this section name only needs to
appear in one place.  I anticipate creating similar macro structures
for a number of other section names.

The long-term goal here is to be able to change the kernel's magic
section names to those that are compatible with -ffunction-sections
-fdata-sections.  This requires renaming all magic sections with names
of the form ".text.foo".
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit c7510859 ("PM/Hibernate: Wait for
SCSI devices scan to complete during resume") added a call to
scsi_complete_async_scans() to software_resume(), so that it waited for
the SCSI scanning to complete, but the call was added at a wrong place.

Namely, it should have been added after wait_for_device_probe(), which
is called only if the image partition hasn't been specified yet.  Also,
it's reasonable to check if the image partition is present and only wait
for the device probing and SCSI scanning to complete if it is not the
case.

Additionally, since noresume is checked right at the beginning of
software_resume() and the function returns immediately if it's set, it
doesn't make sense to check it once again later.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RomFS should advance the destination buffer pointer when reading data from a
blockdev source (the data may be split over multiple blocks, each requiring its
own sb_read() call).  Without this, all the data is copied to the beginning of
the output buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

romfs_lookup() should be using a routine akin to strcmp() on the backing store,
rather than one akin to strncmp().  If it uses the latter, it's liable to match
/bin/shutdown when looking up /bin/sh.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, although find_last_bit is EXPORTed, it is statically linked
with the kernel and is referenced only under CONFIG_SMP.

When CONFIG_SMP is undefined and find_last_bit is referenced only by
modules, linking fails with:

  ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined!

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adjust the CacheFiles documentation to use the correct names of the credential
pointers in task_struct.

The documentation was using names from the old versions of the credentials
patches.
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The virtio-rng drivers checks for spurious callbacks. Since
callbacks can be implemented via shared interrupts (e.g. PCI) this
could lead to guest kernel oopses with lots of virtio devices.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add parameter to microblaze_read()
  microblaze: Use CFLAGS_KERNEL instead of CFLAGS
  microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too
  microblaze: Do not check use_dcache
  microblaze: Do not use PVR configuration for broken MB version
  microblaze: Fix USR1/2 pvr printing message
  microblaze: iowrite upon timeout
  microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig
  microblaze: Remove redundant variable
  microblaze: Move start_thread to process.c
  microblaze: Add missing preadv and pwritev syscalls
  microblaze: Add missing declaration for die and _exception func
  microblaze: Remove sparse error in traps.c
  microblaze: Move task_pt_regs up
  microblaze: Rename kernel_mode to pt_mode in pt_regs
  microblaze: Remove uncache shadow condition
  microblaze: Remove while(1) loop from show_regs function
  microblaze: Remove unneded per cpu SYSCALL_SAVE variable

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  ACPI, i915: Register ACPI video even when not modesetting
  Revert "ACPICA: delete check for AML access to port 0x81-83"
  I/O port protection: update for windows compatibility.
  sony-laptop: always try to unblock rfkill on load
  sony-laptop: fix bogus error message display on resume
  ACPI: EC: Fix ACPI EC resume non-query interrupt message
  sony-laptop: SNC input event 38 fix
  sony-laptop: SNC 127 Initialization Fix
  sony-laptop: Duplicate SNC 127 Event Fix
  ACPI: prevent processor.max_cstate=0 boot crash
  ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
  ACPI: delete obsolete "bus master activity" proc field
  ACPI: idle: mark_tsc_unstable() at init-time, not run-time
  ACPI: add /sys/firmware/acpi/interrupts/sci_not counter
  ACPI video: fix an error when the brightness levels on AC and on Battery are same
  acpi-cpufreq: Do not let get_measured perf depend on internal variable
  acpi-cpufreq: style-only: add parens to math expression
  acpi-cpufreq: Cleanup: Use printk_once
  x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf
  thinkpad-acpi: bump up version to 0.23
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: update the default config for the ColdFire 5407C3 board
  m68knommu: update the default config for the ColdFire 5307C3 board
  m68knommu: update the default config for the ColdFire 5257EVB board
  m68knommu: update the default config for the ColdFire 5249EVB.
  m68knommu: add a defconfig for the ColdFire M5272C3 board
  m68knommu: update the defconfig for the ColdFire 5208evb board
  m68knommu: fix DMA support for ColdFire
  m68knommu: remove unused kernel stats offsets
  m68knommu: fix missing .data.cacheline_aligned section
  m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.