- 30 Apr, 2015 11 commits
-
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/ivtv/ivtv-driver.c:832 ivtv_init_struct2() error: buffer overflow 'itv->card->video_inputs' 6 <= 6 That happens because nof_inputs and nof_audio_inputs can be initialized as IVTV_CARD_MAX_VIDEO_INPUTS, instead of IVTV_CARD_MAX_VIDEO_INPUTS - 1. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/radio/radio-si476x.c:571 si476x_radio_do_post_powerup_init() warn: inconsistent indenting Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/i2c/saa717x.c:155 saa717x_read() warn: mask and shift to zero drivers/media/i2c/saa717x.c:155 saa717x_read() warn: mask and shift to zero This is done right at saa717x_write(), but the read function is broken. Thankfully, there's just one place at saa717x driver that uses multibyte read (for status report, via printk). Yet, let's fix it. From saa717x_write(), it is clear that the bytes are in little endian: mm1[4] = (value >> 16) & 0xff; mm1[3] = (value >> 8) & 0xff; mm1[2] = value & 0xff; So, the same order should be valid for read too. Compile-tested only. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/saa7164/saa7164-core.c:631 saa7164_irq() warn: variable dereferenced before check 'dev' (see line 621) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/ngene/ngene-core.c:1529 init_channel() error: we previously assumed 'chan->fe' could be null (see line 1521) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/saa7134/saa7134-cards.c:7197 saa7134_xc2028_callback() warn: inconsistent indenting drivers/media/pci/saa7134/saa7134-cards.c:7846 saa7134_board_init2() warn: inconsistent indenting drivers/media/pci/saa7134/saa7134-cards.c:7913 saa7134_board_init2() warn: inconsistent indenting While here, fix a few CodingStyle issues on the affected code Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/pci/cx18/cx18-driver.c:807 cx18_init_struct2() error: buffer overflow 'cx->card->video_inputs' 6 <= 6 That happens because nof_inputs and nof_audio_inputs can be initialized as CX18_CARD_MAX_VIDEO_INPUTS, instead of CX18_CARD_MAX_VIDEO_INPUTS - 1. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
drivers/media/rc/rc-main.c:749 rc_close() warn: inconsistent indenting There's an extra space there. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_subdev_input_index': drivers/media/platform/am437x/am437x-vpfe.c:1679:27: warning: variable 'sdinfo' set but not used [-Wunused-but-set-variable] struct vpfe_subdev_info *sdinfo; ^ Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
drivers/media/platform/am437x/am437x-vpfe.c:513 vpfe_ccdc_set_params() warn: inconsistent indenting Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_ccdc_update_raw_params': drivers/media/platform/am437x/am437x-vpfe.c:430:38: warning: variable 'config_params' set but not used [-Wunused-but-set-variable] struct vpfe_ccdc_config_params_raw *config_params = ^ vpfe_ccdc_update_raw_params() is supposed to update the raw params at ccdc. However, it is just creating a local var and changing it. Compile-tested only. Cc: Benoit Parrot <bparrot@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 28 Apr, 2015 13 commits
-
-
Hans Verkuil authored
radio-bcm2048.c: In function 'bcm2048_i2c_driver_probe': radio-bcm2048.c:2597:11: warning: variable 'skip_release' set but not used [-Wunused-but-set-variable] int err, skip_release = 0; ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
In file included from include/uapi/linux/posix_types.h:4:0, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/uapi/linux/sysinfo.h:4, from include/uapi/linux/kernel.h:4, from include/linux/cache.h:4, from include/linux/time.h:4, from include/linux/input.h:11, from drivers/media/usb/dvb-usb/dvb-usb.h:13, from drivers/media/usb/dvb-usb/dib0700.h:13, from drivers/media/usb/dvb-usb/dib0700_devices.c:9: drivers/media/dvb-frontends/dib8000.h: In function 'dib8000_attach': include/linux/stddef.h:8:14: warning: return makes integer from pointer without a cast [-Wint-conversion] #define NULL ((void *)0) ^ drivers/media/dvb-frontends/dib8000.h:72:9: note: in expansion of macro 'NULL' return NULL; ^ Reported-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
In file included from drivers/media/common/b2c2/flexcop-fe-tuner.c:13:0: drivers/media/dvb-frontends/cx24123.h:54:2: warning: 'cx24123_get_tuner_i2c_adapter' defined but not used [-Wunused-function] cx24123_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ In file included from drivers/media/usb/em28xx/em28xx-dvb.c:46:0: drivers/media/dvb-frontends/s921.h:40:2: warning: 's921_get_tuner_i2c_adapter' defined but not used [-Wunused-function] s921_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ In file included from drivers/media/usb/em28xx/em28xx-dvb.c:55:0: drivers/media/dvb-frontends/mb86a20s.h:49:2: warning: 'mb86a20s_get_tuner_i2c_adapter' defined but not used [-Wunused-function] mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ In file included from drivers/media/usb/cx231xx/cx231xx-dvb.c:35:0: drivers/media/dvb-frontends/mb86a20s.h:49:2: warning: 'mb86a20s_get_tuner_i2c_adapter' defined but not used [-Wunused-function] mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe) ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Fix these compiler warnings that appeared after switching to gcc-5.1.0: drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_power': drivers/media/platform/s3c-camif/camif-capture.c:118:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == camif->sensor.power_count) ^ drivers/media/platform/s3c-camif/camif-capture.c: In function 'sensor_set_streaming': drivers/media/platform/s3c-camif/camif-capture.c:134:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == camif->sensor.stream_count) ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Fix these compiler warnings that appeared after switching to gcc-5.1.0: drivers/media/i2c/s5k5baf.c: In function 's5k5baf_set_power': drivers/media/i2c/s5k5baf.c:1057:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on != state->power) ^ drivers/media/i2c/s5k6aa.c: In function 's5k6aa_set_power': drivers/media/i2c/s5k6aa.c:878:10: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] if (!on == s5k6aa->power) { ^ drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function 's5c73m3_oif_set_power': drivers/media/i2c/s5c73m3/s5c73m3-core.c:1456:17: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] } else if (!on == state->power) { ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Kamil Debski <k.debski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Fix typo. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
For these encodings the quantization range should be ignored, since there is only one possible Y'CbCr encoding. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
In order to be consistent with the other Y'CbCr encodings add support for full range V4L2_YCBCR_ENC_BT2020_CONST_LUM. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
In order to be consistent with the other Y'CbCr encodings add support for full range V4L2_YCBCR_ENC_BT2020. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
In order to be consistent with the other Y'CbCr encodings add support for full range V4L2_YCBCR_ENC_SMPTE240M. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Add a log_status function to the test pattern generator and use that in vivid. This simplifies debugging complex colorspace problems. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Philipp Zabel authored
Use the VIVID_WEBCAM_SIZES constant where appropriate and add a 1920x1080 pixel frame size setting with frame rates of 2 fps and 5 fps. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
You must use static inline otherwise you get these errors if CONFIG_OF is not defined: In file included from drivers/media/platform/soc_camera/soc_camera.c:39:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ In file included from drivers/media/platform/soc_camera/atmel-isi.c:28:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ In file included from drivers/media/platform/soc_camera/rcar_vin.c:36:0: include/media/v4l2-of.h:112:13: warning: 'v4l2_of_free_endpoint' defined but not used [-Wunused-function] static void v4l2_of_free_endpoint(struct v4l2_of_endpoint *endpoint) ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 27 Apr, 2015 16 commits
-
-
Pavel Machek authored
Add device tree support for adp1653 flash LED driver. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Pavel Machek authored
Documentation for adp1653 bindings. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
Instead of parsing the link-frequencies property in the driver, let v4l2_of_alloc_parse_endpoint() do it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
The link-frequencies property is a variable length array of link frequencies in an endpoint. The array is needed by an increasing number of drivers, so it makes sense to add it to struct v4l2_of_endpoint. However, the length of the array is variable and the size of struct v4l2_of_endpoint is fixed since it is allocated by the caller. The options here are 1. to define a fixed maximum limit of link frequencies that has to be the global maximum of all boards. This is seen as problematic since the maximum could be largish, and everyone hitting the problem would need to submit a patch to fix it, or 2. parse the property in every driver. This doesn't sound appealing as two of the three implementations submitted to linux-media were wrong, and one of them was even merged before this was noticed, or 3. change the interface so that allocating and releasing memory according to the size of the array is possible. This is what the patch does. v4l2_of_alloc_parse_endpoint() is just like v4l2_of_parse_endpoint(), but it will allocate the memory resources needed to store struct v4l2_of_endpoint and the additional arrays pointed to by this struct. A corresponding release function v4l2_of_free_endpoint() is provided to release the memory allocated by v4l2_of_alloc_parse_endpoint(). In addition to this, the link-frequencies property is parsed as well, and the result is stored to struct v4l2_of_endpoint field link_frequencies. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
Zero the entire struct starting from bus_type. As more fields are added, no changes will be needed in the function to reset their value explicitly. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
The field is unused. Remove it. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Mauro Carvalho Chehab authored
Linux 4.1-rc1 * tag 'v4.1-rc1': (11651 commits) Linux 4.1-rc1 x86_64, asm: Work around AMD SYSRET SS descriptor attribute issue v4l: xilinx: fix for include file movement platform/chrome: chromeos_laptop - instantiate Atmel at primary address RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() Btrfs: prevent list corruption during free space cache processing toshiba_acpi: Do not register vendor backlight when acpi_video bl is available x86: fix special __probe_kernel_write() tail zeroing case crypto: img-hash - CRYPTO_DEV_IMGTEC_HASH should depend on HAS_DMA crypto: x86/sha512_ssse3 - fixup for asm function prototype change nios2: rework cache nios2: Add types.h header required for __u32 type ALSA: hda - fix headset mic detection problem for one more machine eth: bf609 eth clock: add pclk clock for stmmac driver probe blackfin: Wire up missing syscalls Btrfs: fix inode cache writeout ACPI / scan: Add a scan handler for PRP0001 ...
-
Linus Torvalds authored
-
Andy Lutomirski authored
AMD CPUs don't reinitialize the SS descriptor on SYSRET, so SYSRET with SS == 0 results in an invalid usermode state in which SS is apparently equal to __USER_DS but causes #SS if used. Work around the issue by setting SS to __KERNEL_DS __switch_to, thus ensuring that SYSRET never happens with SS set to NULL. This was exposed by a recent vDSO cleanup. Fixes: e7d6eefa x86/vdso32/syscall.S: Do not load __USER32_DS to %ss Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <vda.linux@googlemail.com> Cc: Brian Gerst <brgerst@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull intel drm fixes from Dave Airlie. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
-
git://git.infradead.org/intel-iommuLinus Torvalds authored
Pull intel iommu updates from David Woodhouse: "This lays a little of the groundwork for upcoming Shared Virtual Memory support — fixing some bogus #defines for capability bits and adding the new ones, and starting to use the new wider page tables where we can, in anticipation of actually filling in the new fields therein. It also allows graphics devices to be assigned to VM guests again. This got broken in 3.17 by disallowing assignment of RMRR-afflicted devices. Like USB, we do understand why there's an RMRR for graphics devices — and unlike USB, it's actually sane. So we can make an exception for graphics devices, just as we do USB controllers. Finally, tone down the warning about the X2APIC_OPT_OUT bit, due to persistent requests. X2APIC_OPT_OUT was added to the spec as a nasty hack to allow broken BIOSes to forbid us from using X2APIC when they do stupid and invasive things and would break if we did. Someone noticed that since Windows doesn't have full IOMMU support for DMA protection, setting the X2APIC_OPT_OUT bit made Windows avoid initialising the IOMMU on the graphics unit altogether. This means that it would be available for use in "driver mode", where the IOMMU registers are made available through a BAR of the graphics device and the graphics driver can do SVM all for itself. So they started setting the X2APIC_OPT_OUT bit on *all* platforms with SVM capabilities. And even the platforms which *might*, if the planets had been aligned correctly, possibly have had SVM capability but which in practice actually don't" * git://git.infradead.org/intel-iommu: iommu/vt-d: support extended root and context entries iommu/vt-d: Add new extended capabilities from v2.3 VT-d specification iommu/vt-d: Allow RMRR on graphics devices too iommu/vt-d: Print x2apic opt out info instead of printing a warning iommu/vt-d: kill bogus ecap_niotlb_iunits()
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c fixes from Wolfram Sang: "This has a mixture of merge window cleanups and bugfixes" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: st: add include for pinctrl i2c: mux: use proper dev when removing "channel-X" symlinks i2c: digicolor: remove duplicate include i2c: Mark adapter devices with pm_runtime_no_callbacks i2c: pca-platform: fix broken email address i2c: mxs: fix broken email address i2c: rk3x: report number of messages transmitted
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Filipe hit two problems in my block group cache patches. We finalized the fixes last week and ran through more tests" * 'for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: prevent list corruption during free space cache processing Btrfs: fix inode cache writeout
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel into drm-fixes three fixes for i915. * tag 'drm-intel-next-fixes-2015-04-25' of git://anongit.freedesktop.org/drm-intel: drm/i915: vlv: fix save/restore of GFX_MAX_REQ_COUNT reg drm/i915: Workaround to avoid lite restore with HEAD==TAIL drm/i915: cope with large i2c transfers
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client updates from Trond Myklebust: "Another set of mainly bugfixes and a couple of cleanups. No new functionality in this round. Highlights include: Stable patches: - Fix a regression in /proc/self/mountstats - Fix the pNFS flexfiles O_DIRECT support - Fix high load average due to callback thread sleeping Bugfixes: - Various patches to fix the pNFS layoutcommit support - Do not cache pNFS deviceids unless server notifications are enabled - Fix a SUNRPC transport reconnection regression - make debugfs file creation failure non-fatal in SUNRPC - Another fix for circular directory warnings on NFSv4 "junctioned" mountpoints - Fix locking around NFSv4.2 fallocate() support - Truncating NFSv4 file opens should also sync O_DIRECT writes - Prevent infinite loop in rpcrdma_ep_create() Features: - Various improvements to the RDMA transport code's handling of memory registration - Various code cleanups" * tag 'nfs-for-4.1-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (55 commits) fs/nfs: fix new compiler warning about boolean in switch nfs: Remove unneeded casts in nfs NFS: Don't attempt to decode missing directory entries Revert "nfs: replace nfs_add_stats with nfs_inc_stats when add one" NFS: Rename idmap.c to nfs4idmap.c NFS: Move nfs_idmap.h into fs/nfs/ NFS: Remove CONFIG_NFS_V4 checks from nfs_idmap.h NFS: Add a stub for GETDEVICELIST nfs: remove WARN_ON_ONCE from nfs_direct_good_bytes nfs: fix DIO good bytes calculation nfs: Fetch MOUNTED_ON_FILEID when updating an inode sunrpc: make debugfs file creation failure non-fatal nfs: fix high load average due to callback thread sleeping NFS: Reduce time spent holding the i_mutex during fallocate() NFS: Don't zap caches on fallocate() xprtrdma: Make rpcrdma_{un}map_one() into inline functions xprtrdma: Handle non-SEND completions via a callout xprtrdma: Add "open" memreg op xprtrdma: Add "destroy MRs" memreg op xprtrdma: Add "reset MRs" memreg op ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull fourth vfs update from Al Viro: "d_inode() annotations from David Howells (sat in for-next since before the beginning of merge window) + four assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: RCU pathwalk breakage when running into a symlink overmounting something fix I_DIO_WAKEUP definition direct-io: only inc/dec inode->i_dio_count for file systems fs/9p: fix readdir() VFS: assorted d_backing_inode() annotations VFS: fs/inode.c helpers: d_inode() annotations VFS: fs/cachefiles: d_backing_inode() annotations VFS: fs library helpers: d_inode() annotations VFS: assorted weird filesystems: d_inode() annotations VFS: normal filesystems (and lustre): d_inode() annotations VFS: security/: d_inode() annotations VFS: security/: d_backing_inode() annotations VFS: net/: d_inode() annotations VFS: net/unix: d_backing_inode() annotations VFS: kernel/: d_inode() annotations VFS: audit: d_backing_inode() annotations VFS: Fix up some ->d_inode accesses in the chelsio driver VFS: Cachefiles should perform fs modifications on the top layer only VFS: AF_UNIX sockets should call mknod on the top layer only
-