- 13 Dec, 2019 40 commits
-
-
Brian Masney authored
[ Upstream commit 7ed07855 ] When attempting to setup up a gpio hog, device probing will repeatedly fail with -EPROBE_DEFERED errors. It is caused by a circular dependency between the gpio and pinctrl frameworks. If the gpio-ranges property is present in device tree, then the gpio framework will handle the gpio pin registration and eliminate the circular dependency. See Christian Lamparter's commit a86caa9b ("pinctrl: msm: fix gpio-hog related boot issues") for a detailed commit message that explains the issue in much more detail. The code comment in this commit came from Christian's commit. I did not test this change against any hardware supported by this particular driver, however I was able to validate this same fix works for pinctrl-spmi-gpio.c using a LG Nexus 5 (hammerhead) phone. Signed-off-by:
Brian Masney <masneyb@onstation.org> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Michal Simek authored
[ Upstream commit d1d4445a ] s/_/-/ for node names. It fixes warnings like this: ... Warning (node_name_chars_strict): /cpu_opp_table: Character '_' not recommended in node name ... Issues reported by make dtbs W=12 Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Raveendra Padasalagi authored
[ Upstream commit 4f0129d1 ] Remove setkey() callback handler for normal/non key hash algorithms and keep it for AES-CBC/CMAC which needs key. Fixes: 9d12ba86 ("crypto: brcm - Add Broadcom SPU driver") Signed-off-by:
Raveendra Padasalagi <raveendra.padasalagi@broadcom.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vitaly Chikunov authored
[ Upstream commit 2eb4942b ] Currently used scalar multiplication algorithm (Matthieu Rivain, 2011) have invalid values for scalar == 1, n-1, and for regularized version n-2, which was previously not checked. Verify that they are not used as private keys. Signed-off-by:
Vitaly Chikunov <vt@altlinux.org> Signed-off-by:
-
Lucas Stach authored
[ Upstream commit 749a5068 ] Use the correct compatible for the new protocol used by the firmware on the touch controller, the GPIO wakeup isn't used in that case. Also eGalax touch needs axis swapping, just as with the RMI4 touch. Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Tony Lindgren authored
[ Upstream commit 7b4f8ac2 ] We can have holes in clock_roles with interface clock missing for example. Currently getting an optional clock will fail if there are only a functional clock and an optional clock. Fixes: 09dfe581 ("bus: ti-sysc: Add handling for clkctrl opt clocks") Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Maxime Jourdan authored
[ Upstream commit 41bb5769 ] The current condition makes it difficult to compile the amlogic/ drivers with COMPILE_TEST, or without ARCH_MESON in general. Fixes kbuild errors with patch series that depend on drivers in that directory, for instance the meson video decoder. Signed-off-by:
Maxime Jourdan <mjourdan@baylibre.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
-
Steffen Maier authored
[ Upstream commit 0c902936 ] This was introduced with v4.18 commit 8c3d20aa ("scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED") but would now suppress helpful -Wswitch compiler warnings when building with W=1 such as the following forced example: drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_handle_failed': drivers/s390/scsi/zfcp_erp.c:126:2: warning: enumeration value 'ZFCP_ERP_ACTION_REOPEN_PORT_FORCED' not handled in switch [-Wswitch] switch (want) { ^~~~~~ But then again, only with W=1 we would notice unhandled enum cases. Without the default cases and a missed unhandled enum case, the code might perform unforeseen things we might not want... As of today, we never run through the removed default case, so removing it is no functional change. In the future, we never should run through a default case but introduce the necessary specific case(s) to handle new functionality. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Steffen Maier authored
[ Upstream commit 724e1443 ] The CDB is just a part inside of FCP_CMND, see zfcp_fc_scsi_to_fcp(). While at it, fix the device driver reaction: adapter not LUN shutdown. Signed-off-by:
-
Andrew Lunn authored
[ Upstream commit ddc49acb ] We already have a workaround for a couple of switches whose internal PHYs only have the Marvel OUI, but no model number. We detect such PHYs and give them the 6390 ID as the model number. However the mv88e6161 has two SERDES interfaces in the same address range as its internal PHYs. These suffer from the same problem, the Marvell OUI, but no model number. As a result, these SERDES interfaces were getting the same PHY ID as the mv88e6390, even though they are not PHYs, and the Marvell PHY driver was trying to drive them. Add a special case to stop this from happen. Reported-by:
Chris Healy <Chris.Healy@zii.aero> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Maciej W. Rozycki authored
[ Upstream commit 756d6d83 ] The LittleSur board is marked for high memory support and therefore clearly must provide a way to have enough memory installed for some to be present outside the low 4GiB physical address range. With the memory map of the BCM1250 SOC it has been built around it means over 1GiB of actual DRAM, as only the first 1GiB is mapped in the low 4GiB physical address range[1]. Complement commit cce335ae ("[MIPS] 64-bit Sibyte kernels need DMA32.") then and also enable ZONE_DMA32 for LittleSur. References: [1] "BCM1250/BCM1125/BCM1125H User Manual", Revision 1250_1125-UM100-R, Broadcom Corporation, 21 Oct 2002, Section 3: "System Overview", "Memory Map", pp. 34-38 Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by:
Paul Burton <paul.burton@mips.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Patchwork: https://patchwork.linux-mips.org/patch/21107/ Fixes: cce335ae ("[MIPS] 64-bit Sibyte kernels need DMA32.") Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
David Teigland authored
[ Upstream commit 8fc6ed9a ] Which would leak memory for the idr internals. Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
John Keeping authored
[ Upstream commit 03d9f8fa ] There is no functional change from this, but it is confusing to find two copies of vcc_sys and no vcc_flash when looking in /sys/class/regulator/*/name. Signed-off-by:
John Keeping <john@metanate.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Signed-off-by:
-
Heiko Stuebner authored
[ Upstream commit ac8cb538 ] Similar to commit a9f0c0e5 ("clk: rockchip: fix rk3188 sclk_smc gate data") there is one other gate clock in the rk3188 clock driver with a similar wrong ordering, the sclk_mac_lbtest. So fix it as well. Signed-off-by:
-
Finley Xiao authored
[ Upstream commit a9f0c0e5 ] Fix sclk_smc gate data. Change variable order, flags come before the register address. Signed-off-by:
Finley Xiao <finley.xiao@rock-chips.com> Signed-off-by:
Johan Jonker <jbx9999@hotmail.com> Signed-off-by:
-
Alice Michael authored
[ Upstream commit 843faff8 ] When calculating the valid length for a VIRTCHNL_OP_ENABLE_CHANNELS message, we accidentally allowed messages with one extra virtchnl_channel_info structure on the end. This happened due to an off by one error, because we forgot that valid_len already accounted for one virtchnl_channel_info structure, so we need to subtract one from the num_tc value. Signed-off-by:
Alice Michael <alice.michael@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Mitch Williams authored
[ Upstream commit 7c3758f7 ] On link types that do not support autoneg, we cannot attempt to restart nway negotiation. This results in a dead link that requires a power cycle to remedy. Fix this by saving off the autoneg state and checking this value before we try to restart nway. Signed-off-by:
Mitch Williams <mitch.a.williams@intel.com> Tested-by:
-
Christophe JAILLET authored
[ Upstream commit b28cc6ce ] In case of error, we return 0. This is spurious and not consistent with the other functions of the driver. Commit e115a2bf has modified more than what is said in the commit message. Reverse part of it znd return an error when needed, as it was previously. Fixes: e115a2bf ("rtc: max77686: stop validating rtc_time in .read_time") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 50c8aec4 ] (RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD characters. s3c-rtc driver uses only 2 lower of them and supports years from 2000..2099 range. The third BCD value is typically set to 0, but it looks that handling of it is broken in the hardware. It sometimes defaults to a random (even non-BCD) value. This is not an issue for handling RTCYEAR register, because bcd2bin() properly handles only 8bit values (2 BCD characters, the third one is skipped). The problem is however with ALMYEAR register and proper RTC alarm operation. When YEAREN bit is set for the configured alarm, RTC hardware triggers alarm only when ALMYEAR and RTCYEAR matches. This usually doesn't happen because of the random noise on the third BCD character. Fix this by simply skipping setting ALMYEAR register in alarm configuration. This workaround fixes broken alarm operation on Exynos built-in rtc device. My tests revealed that the issue happens on the following Exynos series: 3250, 4210, 4412, 5250 and 5410. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Ivan Khoronzhuk authored
[ Upstream commit d0e14c4d ] The msgtype and seqid that is smth that belongs to event for comparison but not for staled txq skb. Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit a2dc5091 ] MAX8997 driver disables automatic path selection from MicroUSB connector and manually sets path to either UART or USB lines. However the code for setting USB path worked only for USB host mode (when ID pin is set to ground). When standard USB cable (USB device mode) is connected, path registers are not touched. This means that once the non-USB accessory is connected to MAX8997-operated micro USB port, the path is no longer set to USB and USB device mode doesn't work. This patch fixes it by setting USB path both for USB and USB host modes. Signed-off-by:
-
Anand Moon authored
[ Upstream commit 8fe325fa ] From Odroid XU3/XU4/HC1 schematics the LDO13 regulator for SD2, can be set on 1.8V or 2.8V so the minimal value should be fixed to 1.8V. This is necessary to support UHS-I tuning (otherwise card won't be detected during boot). Signed-off-by:
Anand Moon <linux.amoon@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Denis V. Lunev authored
[ Upstream commit 58a923ad ] Technically dlm_config_nodes() could return error and keep nodes uninitialized. After that on the fail path of we'll call kfree() for that uninitialized value. The patch is simple - we should just initialize nodes with NULL. Signed-off-by:
Denis V. Lunev <den@openvz.org> Signed-off-by:
-
Lev Faerman authored
[ Upstream commit 6263e811 ] Fixes bad masks that would break compilation when evaluated. Signed-off-by:
Lev Faerman <lev.faerman@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
-
Jagan Teki authored
[ Upstream commit ee678706 ] DSI DPHY gate bit on MIPI DSI clock register is bit 15 not bit 30. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Acked-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Moni Shoua authored
[ Upstream commit 69811496 ] Fix reference counting leakage when the event handler aborts due to an unsupported event for the resource type. Fixes: a14c2d4b ("net/mlx5_core: Warn on unsupported events of QP/RQ/SQ") Signed-off-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Eugeniy Paltsev authored
[ Upstream commit 3624379d ] If IOC was already enabled (due to bootloader) it technically needs to be reconfigured with aperture base,size corresponding to Linux memory map which will certainly be different than uboot's. But disabling and reenabling IOC when DMA might be potentially active is tricky business. To avoid random memory issues later, just panic here and ask user to upgrade bootloader to one which doesn't enable IOC This was actually seen as issue on some of the HSDK board with a version of uboot which enabled IOC. There were random issues later with starting of X or peripherals etc. Also while I'm at it, replace hardcoded bits in ARC_REG_IO_COH_PARTIAL and ARC_REG_IO_COH_ENABLE registers by definitions. Inspired by: https://lkml.org/lkml/2018/1/19/557Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 447750f2 ] Its possible to set both HANDLE and POSITION when replacing a rule. In this case, the rule at POSITION gets replaced using the userspace-provided handle. Rule handles are supposed to be generated by the kernel only. Duplicate handles should be harmless, however better disable this "feature" by only checking for the POSITION attribute on insert operations. Fixes: 5e948466 ("netfilter: nf_tables: add insert operation") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Jan Kara authored
[ Upstream commit 8d20d6e9 ] Currently chunk hash key (which is in fact pointer to the inode) is derived as chunk->mark.conn->obj. It is tricky to make this dereference reliable for hash table lookups only under RCU as mark can get detached from the connector and connector gets freed independently of the running lookup. Thus there is a possible use after free / NULL ptr dereference issue: CPU1 CPU2 untag_chunk() ... audit_tree_lookup() list_for_each_entry_rcu(p, list, hash) { list_del_rcu(&chunk->hash); fsnotify_destroy_mark(entry); fsnotify_put_mark(entry) chunk_to_key(p) if (!chunk->mark.connector) ... hlist_del_init_rcu(&mark->obj_list); if (hlist_empty(&conn->list)) { inode = fsnotify_detach_connector_from_object(conn); mark->connector = NULL; ... frees connector from workqueue chunk->mark.connector->obj This race is probably impossible to hit in practice as the race window on CPU1 is very narrow and CPU2 has a lot of code to execute. Still it's better to have this fixed. Since the inode the chunk is attached to is constant during chunk's lifetime it is easy to cache the key in the chunk itself and thus avoid these issues. Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Vincent Whitchurch authored
[ Upstream commit 344eb553 ] getuser() and putuser() (and there underscored variants) use two strb[t]/ldrb[t] instructions when they are asked to get/put 16-bits. This means that the read/write is not atomic even when performed to a 16-bit-aligned address. This leads to problems with vhost: vhost uses __getuser() to read the vring's 16-bit avail.index field, and if it happens to observe a partial update of the index, wrong descriptors will be used which will lead to a breakdown of the virtio communication. A similar problem exists for __putuser() which is used to write to the vring's used.index field. The reason these functions use strb[t]/ldrb[t] is because strht/ldrht instructions did not exist until ARMv6T2/ARMv7. So we should be easily able to fix this on ARMv7. Also, since all ARMv6 processors also don't actually use the unprivileged instructions anymore for uaccess (since CONFIG_CPU_USE_DOMAINS is not used) we can easily fix them too. Signed-off-by:
Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Andrei Otcheretianski authored
[ Upstream commit dc1aca22 ] TDLS discovery response frame is a unicast direct frame to the peer. Since we don't have a STA for this peer, this frame goes through iwl_tx_skb_non_sta(). As the result aux_sta and some completely arbitrary queue would be selected for this frame, resulting in a queue hang. Fix that by sending such frames through AP sta instead. Signed-off-by:
Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Shahar S Matityahu authored
[ Upstream commit 8954e1eb ] In D3 suspend flow in 9260 gen2 HW, the NIC receives two PERST signals. The first PERST is expected and indicates the device on coming resume flow. The second PERST causes FW restart FW restart. In order to avoid this issue, the FW set the persistence bit on. Once this bit is set, the FW ignores reset attempts. The problem is when the FW gets assert during D3 and then the persistence bit is set and causes the FW to ignore reset. To handle this issue, the FW opens the preg bit which allows access to the persistence bit, so that the driver clear the persistence bit and reset the NIC. The flow is as follows: the driver checks if the persistence bit is set. If the bit is set, the driver checks if he can clear the bit. If the driver can not clear the bit then there is no point to continue configuring the NIC since it will fail. The fix was added is in start HW flow instead of the resume flow since in general, if the persistence bit is set, the driver can not start the FW. So it is good to check it when we start configuring the NIC. The driver does not need to close the preg bit since the FW close it during the start flow. Signed-off-by:
Shahar S Matityahu <shahar.s.matityahu@intel.com> Signed-off-by:
-
Johannes Berg authored
[ Upstream commit 06bc6f6e ] When we mark a TID as no longer having a queue, there's no guarantee the TX path isn't using this txq_id right now, having accessed it just before we reset the value. To fix this, add synchronize_net() when we change the TIDs from having a queue to not having one, so that we can then be sure that the TX path is no longer accessing that queue. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Arjun Vynipadath authored
[ Upstream commit 24357e06 ] mac_hlist was initialized during adapter_up, which will be called every time a vf device is first brought up, or every time when device is brought up again after bringing all devices down. This means our state of previous list is lost, causing a memleak if entries are present in the list. To fix that, move list init to the condition that performs initial one time adapter setup. Signed-off-by:
Arjun Vynipadath <arjun@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit d6e19358 ] Right now serial drivers process sysrq keys deep in their character receiving code. This means that they've already grabbed their port->lock spinlock. This can end up getting in the way if we've go to do serial stuff (especially kgdb) in response to the sysrq. Serial drivers have various hacks in them to handle this. Looking at '8250_port.c' you can see that the console_write() skips locking if we're in the sysrq handler. Looking at 'msm_serial.c' you can see that the port lock is dropped around uart_handle_sysrq_char(). It turns out that these hacks aren't exactly perfect. If you have lockdep turned on and use something like the 8250_port hack you'll get a splat that looks like: WARNING: possible circular locking dependency detected [...] is trying to acquire lock: ... (console_owner){-.-.}, at: console_unlock+0x2e0/0x5e4 but task is already holding lock: ... (&port_lock_key){-.-.}, at: serial8250_handle_irq+0x30/0xe4 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&port_lock_key){-.-.}: _raw_spin_lock_irqsave+0x58/0x70 serial8250_console_write+0xa8/0x250 univ8250_console_write+0x40/0x4c console_unlock+0x528/0x5e4 register_console+0x2c4/0x3b0 uart_add_one_port+0x350/0x478 serial8250_register_8250_port+0x350/0x3a8 dw8250_probe+0x67c/0x754 platform_drv_probe+0x58/0xa4 really_probe+0x150/0x294 driver_probe_device+0xac/0xe8 __driver_attach+0x98/0xd0 bus_for_each_dev+0x84/0xc8 driver_attach+0x2c/0x34 bus_add_driver+0xf0/0x1ec driver_register+0xb4/0x100 __platform_driver_register+0x60/0x6c dw8250_platform_driver_init+0x20/0x28 ... -> #0 (console_owner){-.-.}: lock_acquire+0x1e8/0x214 console_unlock+0x35c/0x5e4 vprintk_emit+0x230/0x274 vprintk_default+0x7c/0x84 vprintk_func+0x190/0x1bc printk+0x80/0xa0 __handle_sysrq+0x104/0x21c handle_sysrq+0x30/0x3c serial8250_read_char+0x15c/0x18c serial8250_rx_chars+0x34/0x74 serial8250_handle_irq+0x9c/0xe4 dw8250_handle_irq+0x98/0xcc serial8250_interrupt+0x50/0xe8 ... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&port_lock_key); lock(console_owner); lock(&port_lock_key); lock(console_owner); *** DEADLOCK *** The hack used in 'msm_serial.c' doesn't cause the above splats but it seems a bit ugly to unlock / lock our spinlock deep in our irq handler. It seems like we could defer processing the sysrq until the end of the interrupt handler right after we've unlocked the port. With this scheme if a whole batch of sysrq characters comes in one irq then we won't handle them all, but that seems like it should be a fine compromise. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Wen Yang authored
[ Upstream commit a4c2fec1 ] We can't use "adap->dev" after it has been freed. Fixes: 5bf4fa7d ("i2c: break out OF support into separate file") Signed-off-by:
Wen Yang <wenyang@linux.alibaba.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit 3df70afe ] The driver calls release_resource in remove to match request_mem_region in probe, which is incorrect. Fix it by using the right one, release_mem_region. Signed-off-by:
Chuhong Yuan <hslester96@gmail.com> Signed-off-by:
-
Chuhong Yuan authored
[ Upstream commit dcb77e4b ] The driver misses calling destroy_workqueue in remove like what is done when probe fails. Add the missed calls to fix it. Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Vitaly Kuznetsov authored
[ Upstream commit e37f9f13 ] Glibc-2.30 gained gettid() wrapper, selftests fail to compile: lib/assert.c:58:14: error: static declaration of ‘gettid’ follows non-static declaration 58 | static pid_t gettid(void) | ^~~~~~ In file included from /usr/include/unistd.h:1170, from include/test_util.h:18, from lib/assert.c:10: /usr/include/bits/unistd_ext.h:34:16: note: previous declaration of ‘gettid’ was here 34 | extern __pid_t gettid (void) __THROW; | ^~~~~~ Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Yunhao Tian authored
[ Upstream commit 0b8e7bbd ] The datasheet of V3s (and various other chips) wrote that TCON0_DCLK_DIV can be >= 1 if only dclk is used, and must >= 6 if dclk1 or dclk2 is used. As currently neither dclk1 nor dclk2 is used (no writes to these bits), let's set minimal division to 1. If this minimal division is 6, some common dot clock frequencies can't be produced (e.g. 30MHz will not be possible and will fallback to 25MHz), which is obviously not an expected behaviour. Signed-off-by:
Yunhao Tian <t123yh@outlook.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/linux-arm-kernel/MN2PR08MB57905AD8A00C08DA219377C989760@MN2PR08MB5790.namprd08.prod.outlook.com/Signed-off-by:
-
