- 07 Dec, 2018 7 commits
-
-
Ville Syrjälä authored
skl_compute_wm() wants to compare the old and new watermarks. Currently it gets at the old watermarks via crtc->state, which is confusing since it can point at either the old or the new state depending on where in the sequence we are. In this case it is correct since we have not yet swapped the states, but let's make it super clear what this is doing by using the explicit old state. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181113172330.26069-1-ville.syrjala@linux.intel.comReviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com>
-
Chris Wilson authored
Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3 was good, but still not good enough. To survive 24+ hours under test we needed to perform not one, not two but three extra store-dw. Doing so for each GPU relocation was a little unsightly and since we need to worry about userspace hitting the same issues, we should apply the dummy store-dw into the EMIT_FLUSH. Fixes: 7dd4f672 ("drm/i915: Async GPU relocation processing") References: 7fa28e14 ("drm/i915: Write GPU relocs harder with gen3") Testcase: igt/gem_tiled_fence_blits # blb/pnv Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Although commit fb6f0b64 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture") applied cleanly after a 24 month hiatus, the code had moved on with new methods for peeking and fetching the captured gpu info. Make sure we catch all uses of the stashed error state and avoid dereferencing the error pointer. v2: Move error pointer determination into i915_gpu_capture_state v3: Restore early check to avoid capturing and then throwing away subsequent GPU error states. Fixes: fb6f0b64 ("drm/i915: Prevent machine hang from Broxton's vtd w/a and error capture") Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181207110554.19897-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Currently we face a severe problem on Braswell that manifests as invalid ppGTT accesses. The code tries to maintain the PDP (page directory pointers) inside the context in two ways, direct write into the context and a pipelined LRI update. The direct write into the context is fundamentally racy as it is unserialised with any access (read or write) the GPU is doing. By asserting that Braswell is not used with vGPU (currently an unsupported platform) we can eliminate the dangerous direct write into the context image and solely use the pipelined update. However, the LRI of the PDP fouls up the GPU, causing it to freeze and take out the machine with "forcewake ack timeouts". This seems possible to workaround by preventing the GPU from sleeping (via means of disabling the power-state management interface, i.e. forcing each ring to remain awake) around the update. Equally, it seems an EMIT_INVALIDATE before the LRI is sufficient to prevent the forcewake errors. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108656 References: https://bugs.freedesktop.org/show_bug.cgi?id=108714Signed-off-by:
-
Chris Wilson authored
The recommend procedure was to switch contexts (and mm) then invalidate the TLBs. Make it so. Signed-off-by:
-
Chris Wilson authored
Move the common engine->emit_flush(EMIT_INVALIDATE) back to the backends (where it was once previously) as we seek to specialise it in future patches. Signed-off-by:
-
Mika Kuoppala authored
Gen11 fails to deliver wrt global observation point on tail/entry updates and we sometimes see old entry. Use clflush to forcibly evict our possibly stale copy of the cacheline in hopes that we get fresh one from gpu. Obviously there is something amiss in the coherency protocol so this can be consired as a workaround until real cause is found. The working hardware will do the evict without our cue anyways, so the cost in there should be ameliorated by that fact. v2: for next pass, s/flush/evict, add reset (Chris) References: https://bugzilla.freedesktop.org/show_bug.cgi?id=108315 Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by:
-
- 06 Dec, 2018 9 commits
-
-
Chris Wilson authored
Braswell is really picky about having our writes posted to memory before we execute or else the GPU may see stale values. A wmb() is insufficient as it only ensures the writes are visible to other cores, we need a full mb() to ensure the writes are in memory and visible to the GPU. The most frequent failure in flushing before execution is that we see stale PTE values and execute the wrong pages. References: 987abd5c ("drm/i915/execlists: Force write serialisation into context image vs execution") Signed-off-by:
-
Chris Wilson authored
We can move the remaining RCS workarounds applied to only gen8 to the engine->wa_list, and then reduce all engine->init_hw callbacks to common code. The benefit of using the new wa_list is that we verify that the registers are indeed restored and keep their magic values. v2: INSTPM_FORCE_ORDERING is already part of gen8_ctx_workarounds, and as confirmed by the mmio verification is a part of the context image! v3: MI_MODE is already part of gen8_ctx_workarounds... Signed-off-by:
-
Chris Wilson authored
The mmio readback for verify_gt_engine_wa() also needs a runtime-pm wakeref, so effectively do the entirety of both engine workarounds tests. As such simplify the rpm behaviour here by acquiring the wakeref for the whole of each subtest. It would be still useful to later verify the registers retain their magic values across rpm suspend/resume. Signed-off-by:
-
Ramalingam C authored
At enable/disable of the HDCP encryption, for encryption status change we need minimum one frame duration. And we might program this bit any point(start/End) in the previous frame. With 20mSec, observed the timeout for change in encryption status. Since this is not time critical operation and we need to hold on until the status is changed, fixing the timeout to 50mSec. (Based on trial and error method!) v2: %s/TIME_FOR_ENCRYPT_STATUS_CHANGE/ENCRYPT_STATUS_CHANGE_TIMEOUT_MS [Sean Paul] Signed-off-by:
Ramalingam C <ramalingam.c@intel.com> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1544010283-20223-5-git-send-email-ramalingam.c@intel.com
-
Ramalingam C authored
Adding a debug log when the DP_AUX_NATIVE_REPLY_ACK is missing for aksv write. This helps to locate the possible non responding DP HDCP sinks. v2: Rewritten for readability [Sean Paul] Signed-off-by:
-
Ramalingam C authored
HDCP1.4 is enabled and validated only on GEN9+ platforms. v2: Removed the unnecessary parens [Ville] Signed-off-by:
-
Ramalingam C authored
HDCP1.4 key load process varies between Intel platform to platform. For Gen9 platforms except BXT and GLK, HDCP1.4 key is loaded using the GT Driver Mailbox interface. So all GEN9_BC platforms will use the GT Driver Mailbox interface for HDCP1.4 key load. v2: Using the IS_GEN9_BC for filtering the platforms [Ville] Signed-off-by:
-
José Roberto de Souza authored
GLK and CNL+ supports a bigger FBC tracking area. Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181205004823.30823-1-jose.souza@intel.com
-
José Roberto de Souza authored
The DP_DPCD_QUIRK_NO_PSR comment is missing colon causing this warning when generating kernel documentation. ./include/drm/drm_dp_helper.h:1374: warning: Incorrect use of kernel-doc format: * @DP_DPCD_QUIRK_NO_PSR Fixes: 7c5c641a (drm/i915: Disable PSR in Apple panels) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
- 05 Dec, 2018 2 commits
-
-
Matt Atwood authored
According to DP spec (2.9.3.1 of DP 1.4) if EXTENDED_RECEIVER_CAPABILITY_FIELD_PRESENT is set the addresses in DPCD 02200h through 0220Fh shall contain the DPRX's true capability. These values will match 00000h through 0000Fh, except for DPCD_REV, MAX_LINK_RATE, DOWN_STREAM_PORT_PRESENT. Read from DPCD once for all 3 values as this is an expensive operation. Spec mentions that all of address space 02200h through 0220Fh should contain the right information however currently only 3 values can differ. There is no address space in the intel_dp->dpcd struct for addresses 02200h through 0220Fh, and since so much of the data is a identical, simply overwrite the values stored in 00000h through 0000Fh with the values that can be overwritten from addresses 02200h through 0220Fh. This patch helps with backward compatibility for devices pre DP1.3. v2: read only dpcd values which can be affected, remove incorrect check, split into drm include changes into separate patch, commit message, verbose debugging statements during overwrite. v3: white space fixes v4: make path dependent on DPCD revision > 1.2 v5: split into function, removed DPCD rev check v6: add debugging prints for early exit conditions v7 (From Manasi): * Memcpy, memcmp and debig logging based on sizeof(dpcd_ext) (Jani N) * Exit early (Jani N) v8 (From Manasi): * Get rid of superfluous debug prints (Jani N) * Print entire base DPCD before memcpy (Jani N) v9 (From Manasi): * Add uniform newlines (Rodrigo) Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Tested-by:
-
Pedro Tammela authored
Fixes a comestic issue where spaces were being used instead of mixed tab and spaces. Signed-off-by:
Pedro Tammela <pctammela@gmail.com> Reviewed-by:
-
- 04 Dec, 2018 22 commits
-
-
José Roberto de Souza authored
According to eDP spec, sink can required specific selective update granularity that source must comply. Here caching the value if required and checking if source supports it. v3: - Returning the default granularity in case DPCD read fails(Dhinakaran) - Changed DPCD error message level(Dhinakaran) v4: - Setting granularity to defaul when granularity read is equal to 0(Dhinakaran) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
José Roberto de Souza authored
Selective updates have a default granularity requirements as stated by eDP spec(PSR2 SELECTIVE UPDATE X GRANULARITY CAPABILITY register definition), so check if HW can match those requirements before enabling PSR2. v3: - Changes in the comments and commit message(Dhinakaran) - Printing the hdisplay that do not match with default granularity Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Source is required to comply to sink SU granularity when DP_PSR2_SU_GRANULARITY_REQUIRED is set in DP_PSR_CAPS, so adding the registers offsets. v2: Also adding DP_PSR2_SU_Y_GRANULARITY(Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
Our frontbuffer tracking improved over the years + the WA #0884 helped us keep PSR2 enabled while triggering screen updates when necessary so this FIXME is not valid anymore. Acked-by:
-
José Roberto de Souza authored
For ICL the bit 12 of CHICKEN_TRANS is reserved so we should not touch it and as by default VSC_DATA_SEL_SOFTWARE_CONTROL is already unset in gen10 + GLK we can just drop it and fix for both gens. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
eDP spec states 2 different bits to enable sink to trigger a interruption when there is a CRC mismatch. DP_PSR_CRC_VERIFICATION is for PSR only and DP_PSR_IRQ_HPD_WITH_CRC_ERRORS is for PSR2 only. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
José Roberto de Souza authored
As we have a else block for the 'if (dev_priv->psr.psr2_enabled) {' and this bit is only set for PSR1 move it to that block to make it more easy to read. Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: -
José Roberto de Souza authored
For PSR2 there is no register to tell HW to keep main link enabled while PSR2 is active, so don't configure sink DPCD with a misleading value. v2: Moving the set of DP_PSR_CRC_VERIFICATION to the else block of 'if (dev_priv->psr.psr2_enabled)' to another patch. (Rodrigo) Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
José Roberto de Souza authored
i915 yet don't support PSR in Apple panels, so lets keep it disabled while we work on that. v2: Renamed DP_DPCD_QUIRK_PSR_NOT_CURRENTLY_SUPPORTED to DP_DPCD_QUIRK_NO_PSR (Ville) v3: Adding documentation to DP_DPCD_QUIRK_NO_PSR(Dhinakaran and Jani) Fixed typo in comment of the new quirk entry(Jani) Fixes: 598c6cfe (drm/i915/psr: Enable PSR1 on gen-9+ HW) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by:
-
Tvrtko Ursulin authored
For selftests like live_hangcheck, which does thousands of reset per second, it is too verbose to log every time we re-apply the workarounds. Remove those messages since, coupled with the dedicated selftest, it is sufficient to only log the number of recorded workarounds at init time. Signed-off-by:
-
Chris Wilson authored
Impose a restraint that we have all vma pinned for a request prior to its allocation. This is to simplify request construction, and should facilitate unravelling the lock interdependencies later. Signed-off-by:
-
Jani Nikula authored
Signed-off-by:Jani Nikula <jani.nikula@intel.com>
-
Jani Nikula authored
Commit 2ca711ca ("drm/i915/icl: Consider DSI for getting transcoder state") clobbers the previously read TRANS_DDI_FUNC_CTL_EDP register contents with TRANS_DDI_FUNC_CTL_DSI0 contents. Fix the state readout, and handle DSI 1 while at it. Use a bitmask for iterating and logging transcoders, because the allowed combinations are a bit funky. Fixes: 2ca711ca ("drm/i915/icl: Consider DSI for getting transcoder state") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108928 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Chris Wilson authored
Currently we allocate a scratch page for each engine, but since we only ever write into it for post-sync operations, it is not exposed to userspace nor do we care for coherency. As we then do not care about its contents, we can use one page for all, reducing our allocations and avoid complications by not assuming per-engine isolation. For later use, it simplifies engine initialisation (by removing the allocation that required struct_mutex!) and means that we can always rely on there being a scratch page. v2: Check that we allocated a large enough scratch for I830 w/a Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850Signed-off-by: -
Tvrtko Ursulin authored
The new workaround list allocator grows the list in chunks so will end up with some unused space. Trim it when the initialization phase is done to free up a tiny bit of slab. v2: * Simplify with kmemdup. (Chris Wilson) v3: * Refactor for __size removal. Signed-off-by:
-
Tvrtko Ursulin authored
Convert the per context workaround handling code to run against the newly introduced common workaround framework and fuse the two to use the existing smarter list add helper, the one which does the sorted insert and merges registers where possible. This completes migration of all four classes of workarounds onto the common framework. Existing macros are kept untouched for smaller code churn. v2: * Rename to list name ctx_wa_list and move from dev_priv to engine. v3: * API rename and parameters tweaking. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Instead of having a separate list of white-listed registers we can trivially move this to the common workarounds framework. This brings us one step closer to the goal of driving all workaround classes using the same code. v2: * Use GEM_DEBUG_WARN_ON for the sanity check. (Chris Wilson) v3: * API rename. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Two simple selftests which test that both GT and engine workarounds are not lost after either a full GPU reset, or after the per-engine ones. (Including checks that one engine reset is not affecting workarounds not belonging to itself.) v2: * Rebase for series refactoring. * Add spinner for actual engine reset! * Add idle reset test as well. (Chris Wilson) * Share existing global_reset_lock. (Chris Wilson) v3: * intel_engine_verify_workarounds can be static. * API rename. (Chris Wilson) * Move global reset lock out of the loop. (Chris Wilson) v4: * Add missing rpm puts. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
Since we now have all the GT workarounds in a table, by adding a simple shared helper function we can now verify that their values are still applied after some interesting events in the lifetime of the driver. Initially we only do this after GPU initialization. v2: Chris Wilson: * Simplify verification by realizing it's a simple xor and and. * Remove verification from engine reset path. * Return bool straight away from the verify API. v3: * API rename. (Chris Wilson) Signed-off-by:
-
Tvrtko Ursulin authored
We stopped re-applying the GT workarounds after engine reset since commit 59b449d5 ("drm/i915: Split out functions for different kinds of workarounds"). Issue with this is that some of the GT workarounds live in the MMIO space which gets lost during engine resets. So far the registers in 0x2xxx and 0xbxxx address range have been identified to be affected. This losing of applied workarounds has obvious negative effects and can even lead to hard system hangs (see the linked Bugzilla). Rather than just restoring this re-application, because we have also observed that it is not safe to just re-write all GT workarounds after engine resets (GPU might be live and weird hardware states can happen), we introduce a new class of per-engine workarounds and move only the affected GT workarounds over. Using the framework introduced in the previous patch, we therefore after engine reset, re-apply only the workarounds living in the affected MMIO address ranges. v2: * Move Wa_1406609255:icl to engine workarounds as well. * Rename API. (Chris Wilson) * Drop redundant IS_KABYLAKE. (Chris Wilson) * Re-order engine wa/ init so latest platforms are first. (Rodrigo Vivi) Signed-off-by:
-
Tvrtko Ursulin authored
To enable later verification of GT workaround state at various stages of driver lifetime, we record the list of applicable ones per platforms to a list, from which they are also applied. The added data structure is a simple array of register, mask and value items, which is allocated on demand as workarounds are added to the list. This is a temporary implementation which later in the series gets fused with the existing per context workaround list handling. It is separated at this stage since the following patch fixes a bug which needs to be as easy to backport as possible. Also, since in the following patch we will be adding a new class of workarounds (per engine) which can be applied from interrupt context, we straight away make the provision for safe read-modify-write cycle. v2: * Change dev_priv to i915 along the init path. (Chris Wilson) * API rename. (Chris Wilson) v3: * Remove explicit list size tracking in favour of growing the allocation in power of two chunks. (Chris Wilson) v4: Chris Wilson: * Change wa_list_finish to early return. * Copy workarounds using the compiler for static checking. * Do not bother zeroing unused entries. * Re-order struct i915_wa_list. v5: * kmalloc_array. * Whitespace cleanup. Signed-off-by:
-
Jonathan Gray authored
Change the license of the i915_sw_fence files to MIT matching most of the other i915 files. This makes it possible to use them in a new port of i915 to OpenBSD. Besides some mechanical tree wide changes Chris Wilson is the sole author of these files with Intel holding the copyright. Intel's legal team have given permission to change the license according to Joonas Lahtinen. v2: expand commit message and note permission from Intel legal Signed-off-by:
Jonathan Gray <jsg@jsg.id.au> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
