- 19 Jul, 2019 12 commits
-
-
Yongxin Liu authored
In nouveau_conn_reset(), if connector->state is true, __drm_atomic_helper_connector_destroy_state() will be called, but the memory pointed by asyc isn't freed. Memory leak happens in the following function __drm_atomic_helper_connector_reset(), where newly allocated asyc->state will be assigned to connector->state. So using nouveau_conn_atomic_destroy_state() instead of __drm_atomic_helper_connector_destroy_state to free the "old" asyc. Here the is the log showing memory leak. unreferenced object 0xffff8c5480483c80 (size 192): comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s) hex dump (first 32 bytes): 00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00 ...{T........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0 [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau] [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau] [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau] [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau] [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau] [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau] [<000000007e961c3e>] local_pci_probe+0x47/0xa0 [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30 [<0000000028da4805>] process_one_work+0x27c/0x660 [<000000001d415b04>] worker_thread+0x22b/0x3f0 [<0000000003b69f1f>] kthread+0x12f/0x150 [<00000000c94c29b7>] ret_from_fork+0x3a/0x50 Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ralph Campbell authored
In nouveau_dmem_pages_alloc(), the drm->dmem->mutex is unlocked before calling nouveau_dmem_chunk_alloc() as shown when CONFIG_PROVE_LOCKING is enabled: [ 1294.871933] ===================================== [ 1294.876656] WARNING: bad unlock balance detected! [ 1294.881375] 5.2.0-rc3+ #5 Not tainted [ 1294.885048] ------------------------------------- [ 1294.889773] test-malloc-vra/6299 is trying to release lock (&drm->dmem->mutex) at: [ 1294.897482] [<ffffffffa01a220f>] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.905782] but there are no more locks to release! [ 1294.910690] [ 1294.910690] other info that might help us debug this: [ 1294.917249] 1 lock held by test-malloc-vra/6299: [ 1294.921881] #0: 0000000016e10454 (&mm->mmap_sem#2){++++}, at: nouveau_svmm_bind+0x142/0x210 [nouveau] [ 1294.931313] [ 1294.931313] stack backtrace: [ 1294.935702] CPU: 4 PID: 6299 Comm: test-malloc-vra Not tainted 5.2.0-rc3+ #5 [ 1294.942786] Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1401 05/21/2018 [ 1294.949590] Call Trace: [ 1294.952059] dump_stack+0x7c/0xc0 [ 1294.955469] ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.962213] print_unlock_imbalance_bug.cold.52+0xca/0xcf [ 1294.967641] lock_release+0x306/0x380 [ 1294.971383] ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.978089] ? lock_downgrade+0x2d0/0x2d0 [ 1294.982121] ? find_held_lock+0xac/0xd0 [ 1294.985979] __mutex_unlock_slowpath+0x8f/0x3f0 [ 1294.990540] ? wait_for_completion+0x230/0x230 [ 1294.995002] ? rwlock_bug.part.2+0x60/0x60 [ 1294.999197] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1295.005751] ? page_mapping+0x98/0x110 [ 1295.009511] migrate_vma+0xa74/0x1090 [ 1295.013186] ? move_to_new_page+0x480/0x480 [ 1295.017400] ? __kmalloc+0x153/0x300 [ 1295.021052] ? nouveau_dmem_migrate_vma+0xd8/0x1e0 [nouveau] [ 1295.026796] nouveau_dmem_migrate_vma+0x157/0x1e0 [nouveau] [ 1295.032466] ? nouveau_dmem_init+0x490/0x490 [nouveau] [ 1295.037612] ? vmacache_find+0xc2/0x110 [ 1295.041537] nouveau_svmm_bind+0x1b4/0x210 [nouveau] [ 1295.046583] ? nouveau_svm_fault+0x13e0/0x13e0 [nouveau] [ 1295.051912] drm_ioctl_kernel+0x14d/0x1a0 [ 1295.055930] ? drm_setversion+0x330/0x330 [ 1295.059971] drm_ioctl+0x308/0x530 [ 1295.063384] ? drm_version+0x150/0x150 [ 1295.067153] ? find_held_lock+0xac/0xd0 [ 1295.070996] ? __pm_runtime_resume+0x3f/0xa0 [ 1295.075285] ? mark_held_locks+0x29/0xa0 [ 1295.079230] ? _raw_spin_unlock_irqrestore+0x3c/0x50 [ 1295.084232] ? lockdep_hardirqs_on+0x17d/0x250 [ 1295.088768] nouveau_drm_ioctl+0x9a/0x100 [nouveau] [ 1295.093661] do_vfs_ioctl+0x137/0x9a0 [ 1295.097341] ? ioctl_preallocate+0x140/0x140 [ 1295.101623] ? match_held_lock+0x1b/0x230 [ 1295.105646] ? match_held_lock+0x1b/0x230 [ 1295.109660] ? find_held_lock+0xac/0xd0 [ 1295.113512] ? __do_page_fault+0x324/0x630 [ 1295.117617] ? lock_downgrade+0x2d0/0x2d0 [ 1295.121648] ? mark_held_locks+0x79/0xa0 [ 1295.125583] ? handle_mm_fault+0x352/0x430 [ 1295.129687] ksys_ioctl+0x60/0x90 [ 1295.133020] ? mark_held_locks+0x29/0xa0 [ 1295.136964] __x64_sys_ioctl+0x3d/0x50 [ 1295.140726] do_syscall_64+0x68/0x250 [ 1295.144400] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1295.149465] RIP: 0033:0x7f1a3495809b [ 1295.153053] Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 [ 1295.171850] RSP: 002b:00007ffef7ed1358 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1295.179451] RAX: ffffffffffffffda RBX: 00007ffef7ed1628 RCX: 00007f1a3495809b [ 1295.186601] RDX: 00007ffef7ed13b0 RSI: 0000000040406449 RDI: 0000000000000004 [ 1295.193759] RBP: 00007ffef7ed13b0 R08: 0000000000000000 R09: 000000000157e770 [ 1295.200917] R10: 000000000151c010 R11: 0000000000000246 R12: 0000000040406449 [ 1295.208083] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 Reacquire the lock before continuing to the next page. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Karol Herbst authored
fixes bogus values userspace gets from hwmon while the GPU is powered down Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Rhys Kidd <rhyskidd@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files were simply missing the boiler plate and got caught up in the global update. Fixes: 96ac6d43 (treewide: Add SPDX license identifier - Kbuild) Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files (primarily header files) were simply missing the boiler plate and got caught up in the global update. Fixes: b2441318 (License cleanup: add SPDX GPL-2.0 license identifier to files with no license) Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Acked-by: Emil Velikov <emil.l.velikov@gmail.com> Acked-by: Karol Herbst <kherbst@redhat.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Lyude Paul authored
It turns out that while disabling i2c bus access from software when the GPU is suspended was a step in the right direction with: commit 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") We also ended up accidentally breaking the vbios init scripts on some older Tesla GPUs, as apparently said scripts can actually use the i2c bus. Since these scripts are executed before initializing any subdevices, we end up failing to acquire access to the i2c bus which has left a number of cards with their fan controllers uninitialized. Luckily this doesn't break hardware - it just means the fan gets stuck at 100%. This also means that we've always been using our i2c busses before initializing them during the init scripts for older GPUs, we just didn't notice it until we started preventing them from being used until init. It's pretty impressive this never caused us any issues before! So, fix this by initializing our i2c pad and busses during subdev pre-init. We skip initializing aux busses during pre-init, as those are guaranteed to only ever be used by nouveau for DP aux transactions. Signed-off-by: Lyude Paul <lyude@redhat.com> Tested-by: Marc Meledandri <m.meledandri@gmail.com> Fixes: 342406e4 ("drm/nouveau/i2c: Disable i2c bus access after ->fini()") Cc: stable@vger.kernel.org Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Regs seem valid here still, and tested on TU116. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
Modesetting only, still waiting on ACR/GR firmware from NVIDIA for Turing graphics/compute bring-up. Each subsystem was compared with traces, along with various tests to check that things generally work as they should, and appears compatible enough with the current TU117 code to enable support. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ben Skeggs authored
The fallthrough cases (pre-Fermi) would accidentally allow dual-link pixel clocks even where they shouldn't be. This leads to a high resolution HDMI displays, connected via a DVI->HDMI adapter, to fail on the original NV50. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
Previously center scaling would get scaling applied to it (when it was only supposed to center the image), and aspect-corrected scaling did not always correctly pick whether to reduce width or height for a particular combination of inputs/outputs. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Ilia Mirkin authored
Higher layers tend to add a lot of modes not actually in the EDID, such as the standard DMT modes. Changing this would be extremely intrusive to everyone, so just force the scaler more often. There are no practical cases we're aware of where a LVDS/eDP panel has multiple resolutions exposed, and i915 already does it this way. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110660Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
Timo Wiren authored
Fix a crash or broken depth testing in all OpenGL applications that use the depth buffer on MCP89 (GeForce 320M) seen on a MacBook Pro Late 2010. The bug is tracked in https://bugs.freedesktop.org/show_bug.cgi?id=108500Signed-off-by: Timo Wiren <timo.wiren@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
-
- 15 Jul, 2019 3 commits
-
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
This reverts commit 031e610a, reversing changes made to 52d2d44e. The mm changes in there we premature and not fully ack or reviewed by core mm folks, I dropped the ball by merging them via this tree, so lets take em all back out. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
This reverts commit 6dfc43d3. Going to revert the whole vmwwgfx pull. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
mm/pgtable: drop pgtable_t variable from pte_fn_t functions drops the token came in via the hmm tree, this caused lots of conflicts, but applying this cleanup patch should reduce it to something easier to handle. Just accept the token is unused at this point. Signed-off-by: Dave Airlie <airlied@redhat.com>
-
- 11 Jul, 2019 2 commits
-
-
git://git.pengutronix.de/git/pza/linuxDave Airlie authored
drm/imx: IPUv3 image converter improvements, enable scanout FIFO watermark - Fix a saturation bit position in the colorspace converter configuration memory. - Fully describe colorspace conversions in the API to the imx-media driver. - Add support for limited range and Rec.709 YUV encoding. - Enable colorimetry configuration via the media-controller API. - Enable the double write reduction feature for memory bandwidth savings when the image converter writes YUV 4:2:0 output. - Enable a scanout FIFO watermark feature that can increase priority of scanout read transfers at the memory controller whenever the FIFO runs low. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Philipp Zabel <p.zabel@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/1562326831.4291.8.camel@pengutronix.de
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
drm-next-5.3-2019-07-09: amdgpu: - GPU reset for navi10 - Powerplay fixes for navi10 - GFX fixes for navi10 - Prepare for hmm_range_register API change - XGMI fixes - clang warning fixes - Fixes for various kconfig scenarios - Misc fixes and cleanups amdkfd: - Add workaround for soft hangs with oversubscribed runlists - Remove duplicated pcie atomics request Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190710035017.3407-1-alexander.deucher@amd.com
-
- 09 Jul, 2019 4 commits
-
-
Alex Deucher authored
Query the metrics table for the current uclk activity. Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
It's only available on navi and newer. Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
New parameters added for navi lack documentation. Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Marek Olšák authored
This RELEASE_MEM use has the Release semantic, which means we should write back but not invalidate. Invalidations only make sense with the Acquire semantic (ACQUIRE_MEM), or when RELEASE_MEM is used to do the combined Acquire-Release semantic, which is a barrier, not a fence. The undesirable side effect of doing invalidations for the Release semantic is that it invalidates caches while shaders are running, because the Release can execute in the middle of the next IB. UMDs should use ACQUIRE_MEM at the beginning of IBs. Doing cache invalidations for a fence (like in this case) doesn't do anything for correctness. Signed-off-by: Marek Olšák <marek.olsak@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 08 Jul, 2019 13 commits
-
-
Arnd Bergmann authored
On 32-bit architectures, dividing a 64-bit integer in the kernel leads to a link error: ERROR: "__udivdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! ERROR: "__divdi3" [drivers/gpu/drm/amd/amdgpu/amdgpu.ko] undefined! Change the two recently introduced instances to a multiply+shift operation that is also much cheaper on 32-bit architectures. We can do that here, since both of them are really 32-bit numbers that change a few percent. Fixes: bedbbe6a ("drm/amd/display: Move link functions from dc to dc_link") Fixes: f18bc4e5 ("drm/amd/display: update calculated bounding box logic for NV") Acked-by: Slava Abramov <slava.abramov@amd.com> Tested-by: Slava Abramov <slava.abramov@amd.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Split it between navi10 and newer and everything before navi10. Reviewed-by: Xiaojie Yuan <xiaojie.yuan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Alex Deucher authored
Need to add appropriate ifdef. Acked-by: Leo Li <sunpeng.li@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Arnd Bergmann authored
If smu_get_current_rpm() fails, we can't use the output, as that may be uninitialized: drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: error: variable 'current_rpm' is used uninitialized whenever '?:' condition is false [-Werror,-Wsometimes-uninitialized] ret = smu_get_current_rpm(smu, ¤t_rpm); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:735:3: note: expanded from macro 'smu_get_current_rpm' ((smu)->funcs->get_current_rpm ? (smu)->funcs->get_current_rpm((smu), (speed)) : 0) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3024:12: note: uninitialized use occurs here percent = current_rpm * 100 / pptable->FanMaximumRpm; ^~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: note: remove the '?:' if its condition is always true ret = smu_get_current_rpm(smu, ¤t_rpm); ^ drivers/gpu/drm/amd/amdgpu/../powerplay/inc/amdgpu_smu.h:735:3: note: expanded from macro 'smu_get_current_rpm' ((smu)->funcs->get_current_rpm ? (smu)->funcs->get_current_rpm((smu), (speed)) : 0) ^ drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3020:22: note: initialize the variable 'current_rpm' to silence this warning uint32_t current_rpm; Propagate the error code in that case. Fixes: ee0db820 ("drm/amd/powerplay: move PPTable_t uses into asic level") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Arnd Bergmann authored
Without this header, we get a compiler error in some configurations: .../dc/dcn20/dcn20_hwseq.c: In function 'dcn20_hwss_wait_for_blank_complete': .../dc/dcn20/dcn20_hwseq.c:1493:3: error: implicit declaration of function 'udelay' [-Werror=implicit-function-declaration] Note: the use of udelay itself may be problematic, as can occupy the CPU for 200ms in a busy-loop here. Fixes: 7ed4e635 ("drm/amd/display: Add DCN2 HW Sequencer and Resource") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Arnd Bergmann authored
When CONFIG_PERF_EVENTS is disabled, we cannot compile the pmu portion of the amdgpu driver: drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:48:38: error: no member named 'hw' in 'struct perf_event' struct hw_perf_event *hwc = &event->hw; ~~~~~ ^ drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c:51:13: error: no member named 'attr' in 'struct perf_event' if (event->attr.type != event->pmu->type) ~~~~~ ^ ... Use conditional compilation for this file. Fixes: 9c7c85f7 ("drm/amdgpu: add pmu counters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nathan Chancellor authored
clang warns (trimmed for brevity): drivers/gpu/drm/amd/amdgpu/../powerplay/vega20_ppt.c:3023:8: warning: variable 'current_rpm' is used uninitialized whenever '?:' condition is false [-Wsometimes-uninitialized] ret = smu_get_current_rpm(smu, ¤t_rpm); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ smu_get_current_rpm expands to a ternary operator conditional on smu->funcs->get_current_rpm being not NULL. When this is false, current_rpm will be uninitialized. Zero initialize current_rpm to avoid using random stack values if that ever happens. Fixes: ee0db820 ("drm/amd/powerplay: move PPTable_t uses into asic level") Link: https://github.com/ClangBuiltLinux/linux/issues/588Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nathan Chancellor authored
clang warns (trimmed for brevity): drivers/gpu/drm/amd/amdgpu/../powerplay/smu_v11_0.c:1098:10: warning: variable 'freq' is used uninitialized whenever '?:' condition is false [-Wsometimes-uninitialized] ret = smu_get_current_clk_freq_by_table(smu, clk_id, &freq); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ If get_current_clk_freq_by_table is ever NULL, freq will fail to be properly initialized. Zero initialize it to avoid using uninitialized stack values. smu_get_current_clk_freq_by_table expands to a ternary operator conditional on smu->funcs->get_current_clk_freq_by_table being not NULL. When this is false, freq will be uninitialized. Zero initialize freq to avoid using random stack values if that ever happens. Fixes: e3618249 ("drm/amd/powerplay: fix dpm freq unit error (10KHz -> Mhz)") Link: https://github.com/ClangBuiltLinux/linux/issues/585Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nathan Chancellor authored
clang warns: drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:601:33: warning: suggest braces around initialization of subobject [-Wmissing-braces] static SmuMetrics_t metrics = {0}; ^ {} drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c:905:26: warning: suggest braces around initialization of subobject [-Wmissing-braces] SmuMetrics_t metrics = {0}; ^ {} 2 warnings generated. One way to fix these warnings is to add additional braces like clang suggests; however, there has been a bit of push back from some maintainers[1][2], who just prefer memset as it is unambiguous, doesn't depend on a particular compiler version[3], and properly initializes all subobjects. Do that here so there are no more warnings. [1]: https://lore.kernel.org/lkml/022e41c0-8465-dc7a-a45c-64187ecd9684@amd.com/ [2]: https://lore.kernel.org/lkml/20181128.215241.702406654469517539.davem@davemloft.net/ [3]: https://lore.kernel.org/lkml/20181116150432.2408a075@redhat.com/ Fixes: 98e1a543 ("drm/amd/powerplay: add function get current clock freq interface for navi10") Fixes: ab43c4bf ("drm/amd/powerplay: fix fan speed show error (for hwmon pwm)") Link: https://github.com/ClangBuiltLinux/linux/issues/583Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Nathan Chancellor authored
clang warns: In file included from drivers/gpu/drm/amd/amdgpu/nv.c:53: drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:24:9: warning: '__MES_V10_1_H__' is used as a header guard here, followed by #define of a different macro [-Wheader-guard] #ifndef __MES_V10_1_H__ ^~~~~~~~~~~~~~~ drivers/gpu/drm/amd/amdgpu/../amdgpu/mes_v10_1.h:25:9: note: '__MES_v10_1_H__' is defined here; did you mean '__MES_V10_1_H__'? #define __MES_v10_1_H__ ^~~~~~~~~~~~~~~ __MES_V10_1_H__ 1 warning generated. Capitalize the V. Fixes: 886f82aa ("drm/amdgpu/mes10.1: add ip block mes10.1 (v2)") Link: https://github.com/ClangBuiltLinux/linux/issues/582Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Kevin Wang authored
the hwmon interface need temperature sensor type support. 1. SENSOR_HOTSPOT_TEMP 2. SENSOR_EDGE_TEMP(SENSOR_GPU_TEMP) 3. SENSOR_MEM_TEMP Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Flora Cui authored
scheduler timeout is in jiffies v2: move timeout check to amdgpu_device_get_job_timeout_settings after parsing the value v3: add lockup_timeout param check. 0: keep default value. negative: infinity timeout. v4: refactor codes. Signed-off-by: Flora Cui <flora.cui@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Philip Yang authored
An upcoming change in the hmm_range_register API requires passing in a pointer to an hmm_mirror instead of mm_struct. To access the hmm_mirror we need pass bo instead of ttm to amdgpu_ttm_tt_get_user_pages because mirror is part of amdgpu_mn structure, which is accessible from bo. v2: fix building without CONFIG_HMM_MIRROR (Arnd) Signed-off-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
- 05 Jul, 2019 6 commits
-
-
Kevin Wang authored
add mode1 (by psp) reset for navi asic. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
xinhui pan authored
Perform a ras_suspend to disable ras on all IPs to workaround some ROCm stability issue. Signed-off-by: xinhui pan <xinhui.pan@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Kevin Wang authored
add baco reset support for smu11. it can help gpu do asic reset when gpu recovery. Signed-off-by: Kevin Wang <kevin1.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Jack Xiao authored
We observed some SMU commands take more time for execution, so increase waiting time for response. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Yrjan Skrimstad authored
This driver currently contains a repeated 500ms blocking delay call which causes frequent major buffer underruns in PulseAudio. This patch fixes this issue by replacing the blocking delay with a non-blocking sleep call. Signed-off-by: Yrjan Skrimstad <yrjan@skrimstad.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-
Fuqian Huang authored
kmemdup is introduced to duplicate a region of memory in a neat way. Rather than kmalloc/kzalloc + memcpy, which the programmer needs to write the size twice (sometimes lead to mistakes), kmemdup improves readability, leads to smaller code and also reduce the chances of mistakes. Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy. Reviewed-by: Christian König <Christian.Koenig@amd.com> Reviewed-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-