- 22 Jul, 2018 10 commits
-
-
Jason Wang authored
Rename for reusing this for TX. Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Wang authored
Instead of mixing zerocopy and datacopy logics, this patch tries to split datacopy logic out. This results for a more compact code and ad-hoc optimization could be done on top more easily. Signed-off-by:
-
Jason Wang authored
Introduce tx_can_batch() to determine whether TX could be batched. This will help to reduce the code duplication in the future. Signed-off-by:
-
Jason Wang authored
Factor out logic of getting tx buffer and iov iter initialization. This will be used for reducing codes duplication in the future. Signed-off-by:
-
Jason Wang authored
Signed-off-by:
-
Jason Wang authored
Introduce init_iov_iter() in order to be reused by future patch. Signed-off-by:
-
Jason Wang authored
Signed-off-by:
-
Hangbin Liu authored
Remove the mode parameter for igmp/igmp6_group_added as we can get it from first parameter. Fixes: 6e2059b5 (ipv4/igmp: init group mode as INCLUDE when join source group) Fixes: c7ea20c9 (ipv6/mcast: init as INCLUDE when join SSM INCLUDE group) Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Mark Railton authored
Moved end of comment to it's own line per guide Signed-off-by:
Mark Railton <mark@markrailton.com> Signed-off-by:
-
Guenter Roeck authored
"imply HWMON" was supposed to ensure that the SFP phy code can be built with HWMON enabled or disabled while at the same time ensuring that HWMON is not built as module if SFP is built into the kernel. Unfortunately, that does not work as intended. With "allmodconfig", it results in several unrelated HWMON drivers to be disabled instead of being built as module as expected. Let's use the old "depends on HWMON || HWMON=n" instead. This is slightly different (it enforces SFP to be built as module if HWMON is built as module), but it is better than the alternative of using "IS_REACHABLE()" in the driver since that would disable sensor support if HWMON is built as module and SFP is built into the kernel. Fixes: 1323061a ("net: phy: sfp: Add HWMON support for module sensors") Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 21 Jul, 2018 30 commits
-
-
YueHaibing authored
Use vzalloc instead of the vmalloc, memset combo Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
YueHaibing authored
Use dma_zalloc_coherent instead of dma_alloc_coherent followed by memset 0. Signed-off-by:
-
YueHaibing authored
Fixes the following sparse warnings: net/tipc/link.c:376:5: warning: symbol 'link_bc_rcv_gap' was not declared. Should it be static? net/tipc/link.c:823:6: warning: symbol 'link_prepare_wakeup' was not declared. Should it be static? net/tipc/link.c:959:6: warning: symbol 'tipc_link_advance_backlog' was not declared. Should it be static? net/tipc/link.c:1009:5: warning: symbol 'tipc_link_retrans' was not declared. Should it be static? net/tipc/monitor.c:687:5: warning: symbol '__tipc_nl_add_monitor_peer' was not declared. Should it be static? net/tipc/group.c:230:20: warning: symbol 'tipc_group_find_member' was not declared. Should it be static? Signed-off-by:
-
Gustavo A. R. Silva authored
This line makes up what macro PTR_ERR_OR_ZERO already does. So, make use of PTR_ERR_OR_ZERO rather than an open-code version. This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
David S. Miller authored
Jon Maxwell says: ==================== tcp: improve setsockopt() TCP_USER_TIMEOUT accuracy The patch was becoming bigger based on feedback therefore I have implemented a series of 3 commits instead in V4. This series is a continuation based on V3 here and associated feedback: https://patchwork.kernel.org/patch/10516195/ Suggestions by Neal Cardwell: 1) Fix up units mismatch regarding msec/jiffies. 2) Address possiblility of time_remaining being negative. 3) Add a helper routine tcp_clamp_rto_to_user_timeout() to do the rto calculation. 4) Move start_ts logic into helper routine tcp_retrans_stamp() to validate tcp_sk(sk)->retrans_stamp. 5) Some u32 declation and return refactoring. 6) Return 0 instead of false in tcp_retransmit_stamp(), it's not a bool. Suggestions by David Laight: 1) Don't cache rto in tcp_clamp_rto_to_user_timeout(). Suggestions by Eric Dumazet: 1) Make u32 declartions consistent. 2) Use patch series for easier review. 3) Convert icsk->icsk_user_timeout to millisconds to avoid jiffie to msec dance. 4) Use seperate titles for each commit in the series. 5) Fix fuzzy indentation and line wrap issues. 6) Make commit titles descriptive. Changes: 1) Call tcp_clamp_rto_to_user_timeout(sk) as an argument to inet_csk_reset_xmit_timer() to save on rto declaration. Every time the TCP retransmission timer fires. It checks to see if there is a timeout before scheduling the next retransmit timer. The retransmit interval between each retransmission increases exponentially. The issue is that in order for the timeout to occur the retransmit timer needs to fire again. If the user timeout check happens after the 9th retransmit for example. It needs to wait for the 10th retransmit timer to fire in order to evaluate whether a timeout has occurred or not. If the interval is large enough then the timeout will be inaccurate. For example with a TCP_USER_TIMEOUT of 10 seconds without patch: 1st retransmit: 22:25:18.973488 IP host1.49310 > host2.search-agent: Flags [.] Last retransmit: 22:25:26.205499 IP host1.49310 > host2.search-agent: Flags [.] Timeout: send: Connection timed out Sun Jul 1 22:25:34 EDT 2018 We can see that last retransmit took ~7 seconds. Which pushed the total timeout to ~15 seconds instead of the expected 10 seconds. This gets more inaccurate the larger the TCP_USER_TIMEOUT value. As the interval increases. Add tcp_clamp_rto_to_user_timeout() to determine if the user rto has expired. Or whether the rto interval needs to be recalculated. Use the original interval if user rto is not set. Test results with the patch is the expected 10 second timeout: 1st retransmit: 01:37:59.022555 IP host1.49310 > host2.search-agent: Flags [.] Last retransmit: 01:38:06.486558 IP host1.49310 > host2.search-agent: Flags [.] Timeout: send: Connection timed out Mon Jul 2 01:38:09 EDT 2018 ==================== Signed-off-by:
-
Jon Maxwell authored
Create the tcp_clamp_rto_to_user_timeout() helper routine. To calculate the correct rto, so that the TCP_USER_TIMEOUT socket option is more accurate. Taking suggestions and feedback into account from Eric Dumazet, Neal Cardwell and David Laight. Due to the 1st commit we can avoid the msecs_to_jiffies() and jiffies_to_msecs() dance. Signed-off-by:
Jon Maxwell <jmaxwell37@gmail.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jon Maxwell authored
Create a seperate helper routine as per Neal Cardwells suggestion. To be used by the final commit in this series and retransmits_timed_out(). Signed-off-by:
-
Jon Maxwell authored
This is a preparatory commit. Part of this series that improves the socket TCP_USER_TIMEOUT option accuracy. Implement Eric Dumazets idea to convert icsk->icsk_user_timeout from jiffies to msecs. To eliminate the msecs_to_jiffies() and jiffies_to_msecs() dance in future. Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2018-07-19 please apply one more round of qeth patches to net-next. This brings additional performance improvements for the transmit code, and some refactoring to pave the way for using netdev_priv. Also, two minor fixes for rare corner cases. ==================== Signed-off-by: -
Julian Wiedmann authored
Modify the L2 OSA xmit path so that it also supports L2 IQD devices (in particular, their HW header requirements). This allows IQD devices to advertise NETIF_F_SG support, and eliminates the allocation overhead for the HW header. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Some transmit modes require that the HW header is located in the same page as the initial protocol headers in skb->data. Let callers specify the size of this contiguous header range, and enforce it when building the HW header. While at it, apply some gentle renaming to the relevant L2 code so that it matches the L3 code. Signed-off-by:
-
Julian Wiedmann authored
When checking whether an skb needs to be linearized to fit into an IO buffer, it's desirable to consider the skb's final size and layout (ie. after the HW header was added). But a subsequent linearization can then cause the re-positioned HW header to violate its alignment restrictions. Dealing with this situation in two different code paths is quite tricky. This patch integrates a) linearize-check and b) HW header construction into one 3 step-sequence: 1. evaluate how the HW header needs to be added (to identify if it takes up an additional buffer element), then 2. check if the required buffer elements exceed the device's limit. Linearize when necessary and re-evaluate the HW header placement. 3. Add the HW header in the best-possible way: a) push, without taking up an additional buffer element b) push, but consume another buffer element c) allocate a header object from the cache. Signed-off-by:
-
Julian Wiedmann authored
Nowadays an skb fragment typically spans over multiple pages. So replace the obsolete, SG-only 'fragments' counter with one that tracks the consumed buffer elements. This is what actually matters for performance. Signed-off-by:
-
Julian Wiedmann authored
qeth's ndo_change_mtu() only applies some trivial bounds checking. Set up dev->min_mtu properly, so that dev_set_mtu() can do this for us. Signed-off-by:
-
Julian Wiedmann authored
When the MPC initialization code discovers the HW-specific max MTU, apply the resulting changes straight to the netdevice. If this is the device's first initialization, also set its MTU (HiperSockets: the max MTU; else: a layer-specific default value). Then cap the current MTU by the new max MTU. Signed-off-by:
-
Julian Wiedmann authored
The netdevice is always available now, so get the portno from there. Signed-off-by:
-
Julian Wiedmann authored
Allocation of the netdevice is currently delayed until a qeth card first goes online. This complicates matters in several places, where we need to cache values instead of applying them straight to the netdevice. Improve on this by moving the allocation up to where the qeth card itself is created. This is also one step in direction of eventually placing the qeth card into netdev_priv(). In all subsequent code, remove the now redundant checks whether card->dev is valid. Signed-off-by:
-
Julian Wiedmann authored
netif_carrier_off() does its own checking. Signed-off-by:
-
Julian Wiedmann authored
After the subdriver's remove() routine has completed, the card's layer mode is undetermined again. Reflect this in the layer2 field. If qeth_dev_layer2_store() hits an error after remove() was called, the card _always_ requires a setup(), even if the previous layer mode is requested again. But qeth_dev_layer2_store() bails out early if the requested layer mode still matches the current one. So unless we reset the layer2 field, re-probing the card back to its previous mode is currently not possible. Signed-off-by:
-
Julian Wiedmann authored
By updating q->used_buffers only _after_ do_QDIO() has completed, there is a potential race against the buffer's TX completion. In the unlikely case that the TX completion path wins, qeth_qdio_output_handler() would decrement the counter before qeth_flush_buffers() even incremented it. Signed-off-by:
-
David S. Miller authored
Salil Mehta says: ==================== Misc. cleanups for HNS3 ethernet driver This patch-set presents some cleanups for HNS3 Ethernet Driver. ==================== Signed-off-by: -
Jian Shen authored
Add the SPDX identifiers to HNS3 PF driver. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
Salil Mehta <salil.mehta@huawei.com> Signed-off-by:
-
Jian Shen authored
The struct hclge_desc_cb and hclge_desc_cb are never used in anywhere. This patch removes them. Signed-off-by:
-
Jian Shen authored
The input parameter "dev" of hns3_irq_handle() is indeed used as a tqp vector, it is misleadin. The struct member "flag" is used to indicate ring type, so rename it. Signed-off-by:
-
Jian Shen authored
Use BIT() and GENMASK() to convert the bit mask, modify the inconsistent ones, and remove useless ones. Signed-off-by:
-
Jian Shen authored
Using hex for bit offsets is inconsistent with the rest of the file. Change them to decimal. Signed-off-by:
-
Jian Shen authored
This patch fixes some comment spelling errors, removes redundant comments, rewrites misleading comments, and adds some necessary comments. Signed-off-by:
-
Jian Shen authored
Remove extra space and brackets. Signed-off-by:
-
Jian Shen authored
Apply the standard minor cleanup by returning ret outside the brackets. Signed-off-by:
-
Jian Shen authored
Remove some redundant assignments, because they have been set to zero when allocate hdev. Signed-off-by:
-
