- 18 Apr, 2017 20 commits
-
-
Liu Bo authored
While debugging truncate problems, I found that these tracepoints could help us quickly know what went wrong. Two sets of tracepoints are created to track regular/prealloc file item and inline file item respectively, I put inline as a separate one since what inline file items cares about are way less than the regular one. This adds four tracepoints: - btrfs_get_extent_show_fi_regular - btrfs_get_extent_show_fi_inline - btrfs_truncate_show_fi_regular - btrfs_truncate_show_fi_inline Cc: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ formatting adjustments ] Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Elena Reshetova authored
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Liu Bo authored
After 76b42abb ("Btrfs: fix data loss after truncate when using the no-holes feature"), For either NO_HOLES or inline extents, we've set last_size to newsize to avoid data loss after remount or inode got evicted and read again, thus, we don't need this check anymore. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Adam Borowski authored
If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs balance -dconvert=raid1", the meta.target field will be uninitialized. That's otherwise ok, as it's unused except for this warning. Thus, let's use the existing set of raid levels for the comparison. As a side effect, non-convert balances will now nag about data>metadata. Signed-off-by: Adam Borowski <kilobyte@angband.pl> Reviewed-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
Dmitry V. Levin authored
Add file entries for btrfs header files. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
-
- 16 Apr, 2017 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Olof Johansson: "Again, a batch that's been sitting a couple of weeks, mostly because I anticipated a bit more material but it didn't show up -- which is good. These are all your garden variety fixes for ARM platforms. The most visible issue fixed here is probably the SMP reset issue on OMAP, the rest are minor stuff" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: allwinner: a64: add pmu0 regs for USB PHY ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer reset: add exported __reset_control_get, return NULL if optional ARM: orion5x: only call into phylib when available ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM ARM: sun8i: a33: add operating-points-v2 property to all nodes ARM: sun8i: a33: remove highest OPP to fix CPU crashes
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Four small fixes. Three of them fix the same error in NVMe, in loop, fc, and rdma respectively. The last fix from Ming fixes a regression in this series, where our bvec gap logic was wrong and causes an oops on NVMe for certain conditions" * 'for-linus' of git://git.kernel.dk/linux-block: block: fix bio_will_gap() for first bvec with offset nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability
-
Olof Johansson authored
Merge tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Regression fix for omap interconnect code for deferred probe. Without this fix we can get PM related warnings for devices that use deferred probe. If necessary, this fix can wait for the v4.12 merge window no problem. * tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend ARM: dts: ti: fix PCI bus dtc warnings ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY ARM: dts: OMAP3: Fix MFG ID EEPROM Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fix from Tejun Heo: "Unfortunately, the commit to fix the cgroup mount race in the previous pull request can lead to hangs. The original bug has been around for a while and isn't too likely to be triggered in usual use cases. Revert the commit for now" * 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: Revert "cgroup: avoid attaching a cgroup root to two different superblocks"
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty fix from Greg KH: "Here is a single tty core revert for a patch that was reported to cause problems. The original issue is one that we have lived with for decades, so trying to scramble to fix the fix in time for 4.11-final does not make sense due to the fragility of the tty ldisc layer. Just reverting it makes sense for now" * tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: Revert "tty: don't panic on OOM in tty_set_ldisc()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "While rewriting the function probe code, I stumbled over a long standing bug. This bug has been there sinc function tracing was added way back when. But my new development depends on this bug being fixed, and it should be fixed regardless as it causes ftrace to disable itself when triggered, and a reboot is required to enable it again. The bug is that the function probe does not disable itself properly if there's another probe of its type still enabled. For example: # cd /sys/kernel/debug/tracing # echo schedule:traceoff > set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter # echo do_IRQ:traceoff > set_ftrace_filter The above registers two traceoff probes (one for schedule and one for do_IRQ, and then removes do_IRQ. But since there still exists one for schedule, it is not done properly. When adding do_IRQ back, the breakage in the accounting is noticed by the ftrace self tests, and it causes a warning and disables ftrace" * tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix removing of second function probe
-
Tejun Heo authored
This reverts commit bfb0b80d. Andrei reports CRIU test hangs with the patch applied. The bug fixed by the patch isn't too likely to trigger in actual uses. Revert the patch for now. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andrei Vagin <avagin@virtuozzo.com> Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com
-
- 15 Apr, 2017 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull nvdimm fixes from Dan Williams: "A small crop of lockdep, sleeping while atomic, and other fixes / band-aids in advance of the full-blown reworks targeting the next merge window. The largest change here is "libnvdimm: fix blk free space accounting" which deletes a pile of buggy code that better testing would have caught before merging. The next change that is borderline too big for a late rc is switching the device-dax locking from rcu to srcu, I couldn't think of a smaller way to make that fix. The __copy_user_nocache fix will have a full replacement in 4.12 to move those pmem special case considerations into the pmem driver. The "libnvdimm: band aid btt vs clear poison locking" commit admits that our error clearing support for btt went in broken, so we just disable it in 4.11 and -stable. A replacement / full fix is in the pipeline for 4.12 Some of these would have been caught earlier had DEBUG_ATOMIC_SLEEP been enabled on my development station. I wonder if we should have: config DEBUG_ATOMIC_SLEEP default PROVE_LOCKING ...since I mistakenly thought I got both with PROVE_LOCKING=y. These have received a build success notification from the 0day robot, and some have appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation libnvdimm: band aid btt vs clear poison locking libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat libnvdimm: fix blk free space accounting acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "This is seven small fixes which are all for user visible issues that fortunately only occur in rare circumstances. The most serious is the sr one in which QEMU can cause us to read beyond the end of a buffer (I don't think it's exploitable, but just in case). The next is the sd capacity fix which means all non 512 byte sector drives greater than 2TB fail to be correctly sized. The rest are either in new drivers (qedf) or on error legs" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION scsi: aacraid: fix PCI error recovery path scsi: sd: Fix capacity calculation with 32-bit sector_t scsi: qla2xxx: Add fix to read correct register value for ISP82xx. scsi: qedf: Fix crash due to unsolicited FIP VLAN response. scsi: sr: Sanity check returned mode data scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fix from Helge Deller: "Mikulas Patocka fixed a few bugs in our new pa_memcpy() assembler function, e.g. one bug made the kernel unbootable if source and destination address are the same" * 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix bugs in pa_memcpy
-
Martin Brandenburg authored
Otherwise lockdep says: [ 1337.483798] ================================================ [ 1337.483999] [ BUG: lock held when returning to user space! ] [ 1337.484252] 4.11.0-rc6 #19 Not tainted [ 1337.484423] ------------------------------------------------ [ 1337.484626] mount/14766 is leaving the kernel with locks still held! [ 1337.484841] 1 lock held by mount/14766: [ 1337.485017] #0: (&type->s_umount_key#33/1){+.+.+.}, at: [<ffffffff8124171f>] sget_userns+0x2af/0x520 Caught by xfstests generic/413 which tried to mount with the unsupported mount option dax. Then xfstests generic/422 ran sync which deadlocks. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Acked-by: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Normal pathname lookup doesn't allow empty pathnames, but using AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you can trigger an empty pathname lookup. And not only is the RCU lookup in that case entirely unnecessary (because we'll obviously immediately finalize the end result), it is actively wrong. Why? An empth path is a special case that will return the original 'dirfd' dentry - and that dentry may not actually be RCU-free'd, resulting in a potential use-after-free if we were to initialize the path lazily under the RCU read lock and depend on complete_walk() finalizing the dentry. Found by syzkaller and KASAN. Reported-by: Dmitry Vyukov <dvyukov@google.com> Reported-by: Vegard Nossum <vegard.nossum@gmail.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mikulas Patocka authored
The patch 554bfece ("parisc: Fix access fault handling in pa_memcpy()") reimplements the pa_memcpy function. Unfortunatelly, it makes the kernel unbootable. The crash happens in the function ide_complete_cmd where memcpy is called with the same source and destination address. This patch fixes a few bugs in pa_memcpy: * When jumping to .Lcopy_loop_16 for the first time, don't skip the instruction "ldi 31,t0" (this bug made the kernel unbootable) * Use the COND macro when comparing length, so that the comparison is 64-bit (a theoretical issue, in case the length is greater than 0xffffffff) * Don't use the COND macro after the "extru" instruction (the PA-RISC specification says that the upper 32-bits of extru result are undefined, although they are set to zero in practice) * Fix exception addresses in .Lcopy16_fault and .Lcopy8_fault * Rename .Lcopy_loop_4 to .Lcopy_loop_8 (so that it is consistent with .Lcopy8_fault) Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 554bfece ("parisc: Fix access fault handling in pa_memcpy()") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: "Just a small update to xpad driver to recognize yet another gamepad, and another change making sure userio.h is exported" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add support for Razer Wildcat gamepad uapi: add missing install of userio.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Things seem to be settling down as far as networking is concerned, let's hope this trend continues... 1) Add iov_iter_revert() and use it to fix the behavior of skb_copy_datagram_msg() et al., from Al Viro. 2) Fix the protocol used in the synthetic SKB we cons up for the purposes of doing a simulated route lookup for RTM_GETROUTE requests. From Florian Larysch. 3) Don't add noop_qdisc to the per-device qdisc hashes, from Cong Wang. 4) Don't call netdev_change_features with the team lock held, from Xin Long. 5) Revert TCP F-RTO extension to catch more spurious timeouts because it interacts very badly with some middle-boxes. From Yuchung Cheng. 6) Fix the loss of error values in l2tp {s,g}etsockopt calls, from Guillaume Nault. 7) ctnetlink uses bit positions where it should be using bit masks, fix from Liping Zhang. 8) Missing RCU locking in netfilter helper code, from Gao Feng. 9) Avoid double frees and use-after-frees in tcp_disconnect(), from Eric Dumazet. 10) Don't do a changelink before we register the netdevice in bridging, from Ido Schimmel. 11) Lock the ipv6 device address list properly, from Rabin Vincent" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits) netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage netfilter: nft_hash: do not dump the auto generated seed drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201 ipv6: Fix idev->addr_list corruption net: xdp: don't export dev_change_xdp_fd() bridge: netlink: register netdevice before executing changelink bridge: implement missing ndo_uninit() bpf: reference may_access_skb() from __bpf_prog_run() tcp: clear saved_syn in tcp_disconnect() netfilter: nf_ct_expect: use proper RCU list traversal/update APIs netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULL netfilter: make it safer during the inet6_dev->addr_list traversal netfilter: ctnetlink: make it safer when checking the ct helper name netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_find netfilter: ctnetlink: using bit to represent the ct event netfilter: xt_TCPMSS: add more sanity tests on tcph->doff net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skb l2tp: don't mask errors in pppol2tp_getsockopt() l2tp: don't mask errors in pppol2tp_setsockopt() tcp: restrict F-RTO to work-around broken middle-boxes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of small fixes for x86: - fix locking in RDT to prevent memory leaks and freeing in use memory - prevent setting invalid values for vdso32_enabled which cause inconsistencies for user space resulting in application crashes. - plug a race in the vdso32 code between fork and sysctl which causes inconsistencies for user space resulting in application crashes. - make MPX signal delivery work in compat mode - make the dmesg output of traps and faults readable again" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/intel_rdt: Fix locking in rdtgroup_schemata_write() x86/debug: Fix the printk() debug output of signal_fault(), do_trap() and do_general_protection() x86/vdso: Plug race between mapping and ELF header setup x86/vdso: Ensure vdso32_enabled gets set to valid values only x86/signals: Fix lower/upper bound reporting in compat siginfo
-
- 14 Apr, 2017 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Two small fixes for perf: - the move to support cross arch annotation introduced per arch initialization requirements, fullfill them for s/390 (Christian Borntraeger) - add the missing initialization to the LBR entries to avoid exposing random or stale data" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32() perf annotate s390: Fix perf annotate error -95 (4.10 regression)
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "The irq department provides: - two fixes for the CPU affinity spread infrastructure to prevent unbalanced spreading in corner cases which leads to horrible performance, because interrupts are rather aggregated than spread - add a missing spinlock initializer in the imx-gpcv2 init code" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-imx-gpcv2: Fix spinlock initialization irq/affinity: Fix extra vecs calculation irq/affinity: Fix CPU spread for unbalanced nodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fixes from Thomas Gleixner: "Three fixes from EFI land: - prevent accessing a Graphic Output Device (GOP) which the kernel does not know to handle - prevent PCI reconfiguration to modify a BAR which covers the framebuffer because that's already in use through the EFI GOP interface - avoid reserving EFI runtime regions as this results in bogus memory mappings" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't try to reserve runtime regions efi/fb: Avoid reconfiguration of BAR that covers the framebuffer efi/libstub: Skip GOP with PIXEL_BLT_ONLY format
-